Ubuntu :: Fresh Install Karmic - System Not Reading DVD
Jan 13, 2010
I have had a new install of Karmic from CD and have done all updates and added a few applications like VLC and a few others. I have several different media players, Totem, VLC, Xine, and gxine. I started out thinking Totem might be enough, but added VLC as it can handle just about anything, and then the other just to see of any thing happened.
I have installed all restricted and unrestricted packages from the Medibuntu depositories I can find. Still my laptop will not read any kind of DVD. I am region 2, but have tried both bought region 1 and region 2 DVDs. I had this problem last time I installed Ubuntu, but after installations of a few applications and messing about it suddenly worked. I really didn't know why or what suddenly was working.
View 9 Replies
ADVERTISEMENT
Feb 5, 2010
Am running karmic on a P2-350 Mhz with 256 Mb RAM. Yes, I know this is an old computer, but it has been very good, performance wise, since versions earlier than 8.x I think.
But now, after a fresh install of karmic, it is very slow at everything. Checked system monitor and CPU is constantly running at between 95% and 100%
View 9 Replies
View Related
Feb 17, 2010
I just installed karmic on my media server. With Jaunty, everything worked fine. I tried an upgrade, and go no sound. After poking around in the forms and trying some solutions still no sound.
So I decided to try a fresh install, again, no sound. I have cheched the obvious, mixer volumes, mute, output device, etc. But I can't seem to get it to work. I poked around in the forms and I've tried many of the solutions, but still no luck.
Here is my lspci output for my sound device...
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 8345
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
[Code].....
View 3 Replies
View Related
Apr 22, 2011
I tried to update one of my home machines with a fresh install. This is far from new to me so I did not expect any problem. But I was proven wrong. First: did install the system as usual. First anomaly: system blocked during the install process but did restart it flawlessly one I tried to eject the DVD from the player. It needed actually that intervention to retake working. It then went to install and froze during the first system start. I rebooted with failsafe settings, it then correctly configured. I reached a beautiful desktop. I performed the updates from the update repository and I joined the nvidia proprietary driver repository (which updated to the G02 driver).
I then rebooted the machine and now I am in trouble. In normal mode the system (dual boot Opensuse, XP) does not boot at all and freezes immediately after hitting enter as before. In safe mode it goes further but does not reach X anymore. It blocks with the following line statement: "system console stolen at line 266". I then tried "startx". But the system goes into a scrolling loop that does not allow me to read the output. how to get at least the error message of the loop? I read some line passing by that the system might have an X11 authorization problem.
Athlon Phenom X4 905e
Nividea G7600 graphic card
Former system installed and running flawlessly: 11.1
View 9 Replies
View Related
Mar 15, 2011
After a fresh install of Suse 11.4 X-system comes up with the wrong screensize 1680X1200.
Instead I need 1600x1200. How can i set permanently the screensize I need ?
View 8 Replies
View Related
Apr 13, 2010
After I upgraded Jaunty to Karmic, I found that my grub menu has two pairs of OS options and that the kernel is slightly different between the two. The highest numbered kernel seems to be a working OS release but the next choice in the list does not work correctly - its mouse pointer is invisible!I originally had installed Intrepid in a partition and I used it for a while. Then I decided to upgrade to Jaunty so I put that release in a different partition. I had major troubles getting the system going after the upgrade but I eventually succeeded.Later, I decided to try out Karmic so I created a Live CD of it and tested that. It seemed to be good so I decided to do a standard upgrade. At this point I still had the original Intrepid version on disk in its own partition. The release notes suggested that a network upgrade was the preferred way to upgrade to Karmic so I did that, even though I had the CD. The process seemed to complete OK. I was getting some X windows complaints and X was running in low graphics mode so I uninstalled and reinstalled the fglrx driver; X was happy afterwards. That seemed to be the only significant problem with the upgrade.I noticed that my grub menu now had three fairly new selection pairs, as well as the memtest and the original Intrepid software. I had gained two pairs during the Karmic upgrade. I could not tell which was which by the kernel numbers. I decided that three sets were inappropriate and I decided to remove one set. I was hoping to remove whichever set was superfluous or unnecessary. I picked the oldest of the three (i.e., the one with the smallest kernel number) and used Synaptic to abolish it.
Now, I had two pairs left. The topmost pair is a working Karmic version which I am using right now. The other pair seems to be a broken version of Karmic. By that, I mean that it starts up exactly the same as the working version but when it gets to the login screen then there is no cursor! Actually, the cursor is there but it is invisible. I found that I could run the cursor all the way to the top right corner, click the left mouse button, and get the shutdown/restart/etc. menu. The keyboard's arrow keys could then be used to select a menu item and the mouse button would activate it. But all the while, the cursor was invisible! Of course, this makes the system useless.So, I think that I need to use Synaptic to remove the malfunctioning pair. Questions: why did the upgrade give me two kernels? Would it be safe to remove the earlier one?What I would really like is to have both Karmic and Jaunty available from the grub menu. I am afraid that I will have to do a new install in a different partition to get Jaunty back onto the system, and then will have to repeat all of the customizing and software installations that I have applied during the last year or so. Does anyone know of a shortcut around that?
View 2 Replies
View Related
Jan 25, 2010
I have a working system running Jaunty. For various reasons I want to move to Karmic, but I don't want to use the "upgrade" feature in the software update manager. I need to swap some hard drives around, so I want to do a fresh installation. My question is, what is the easiest way to "migrate" a user to a fresh installation? On a Mac you can simply run the migration tool and it moves everything into place with relative ease, whether from a backup drive or from one computer to another. Is there any analogous program in Ubuntu? Or is it just so simple that such a program is unnecessary?
View 1 Replies
View Related
Jan 30, 2010
When I try to configure a printer, I get the message "CUPS SERVER ERROR"- The CUPS scheduler is not running-my printer a (LEXMARK all in one X2600)and worked fine since ubuntu 8.04..But now it doesnt work.Lexmark even provide a linux driver.
View 9 Replies
View Related
Oct 14, 2010
I'm trying to install 10.10 64bit on a DFI X48 mainboard with 8Gb RAM, I've tried installing from the Desktop CD, Alternate CD and USB stick, but all attempts fail with
uncompression error
-- System halted
I've run memtest86 and the RAM passes OK, I've even tried running the install with just 4Gb RAM but without any luck. I've even tried three different CD/DVD drives.10.04 64bit runs from the Live CD without any problems, but 10.10 isn't playing ball...
View 1 Replies
View Related
May 6, 2011
I just installed the newest version of Xubuntu using the LiveCD, I chose to install it alongside my current installation of Windows 7, everything went well it seemed, but now when I choose Windows 7 under the GRUB menu it just restarts my system and then takes me back to the grub menu, Xubuntu works fine though and boots fine, I tried sudo update-grub, didn't fix it.Heres the boot info from a script I found, but being rather poor when it comes to diagnosing Linux, I figured it'd be best to post this and see
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
[code]....
View 2 Replies
View Related
Feb 4, 2010
After trialling ubuntu on my home comp, and getting brilliant results, i've now migrated my work computer too. Now, i can't connect to the internet or office network. I'm on a small office wired network. When i was on XP all the settings were on 'utomatic' - didn't need to input an IP, DNS, subnet etc. Now i Can't even ping the router.I've browsed around various other threads and can't find a working solution. I've tried inputting various settings in ubuntu connection settings, but still cannot get it working. (was hoping it would be automatic, as it was on my home comp).
View 1 Replies
View Related
Mar 1, 2010
After a fresh install of Debian I came across an error Im hoping you guys can help me with. Ive searched for the error and it appears there are multiple reasons that could be causing it. To compound the problem, Im at work so I dont have the specific error messages....so I just installed Lenny (standard install, no desktop) using a USB installer and everything went very smooth. On first boot, the system paused while waiting for the root file system. After a minute or two it just errored out complaining it could not find the root file system and put me at a (vmlinuz) prompt?My guess is that I need to go into my bios and change my boot priority.. but again, thats just a guess.
View 1 Replies
View Related
Jul 9, 2011
On a Linux CD/DVD, there are compressed filesystem images for the live version for KDE or Gnome for example, but they have no extension, but they are clearly an image file ( compressed filesystem images for the live version before installation ) !!
I was wondering, How do I mount these compressed filesystem images, after I copy the ISO content of the CD/DVD on my system .... I want to edit some files or packages and make some changes, like if I want to customize a live version of gnome for example ! ... ( I know you might be tempted to tell me to use KIWI etc to customize etc ..... ) ... but I want to be able to mount the compressed file system image, then edit it for reading and writing while it is in a subdirectory on its own ... i want to open it ! ... is there a way to do this ??? ... these type of files have no extension ...
i can open this compressed filesystem image then to edit for read & write ... before I roll it back again ..... If and when I succeed .... what should I watch out for ? ... will the same compressed file image but slightly modified work again ?
PS. that same question could be kind of translated or be extended like : how do I use unionfs/squashfs programs on the command line to mount these image files with no extension for read & write mode ???
View 9 Replies
View Related
Mar 4, 2010
after fresh f12 install says reboot & i do... no boot menu, boots xp. there's probably a solution, but i don't know it. someone know how to get around this?
View 10 Replies
View Related
Jan 20, 2010
I've got a Puppy system running version 4.3.0 that I'm trying to get on the home network. I'm using a D-Link DWA-130 (H/W revision C), which has a Realtek RTL8192U chipset. I got the drivers off of D-Link's website, and they compiled and installed just fine, but when either a) I try to connect to the network, or b) while I'm browsing the web, the system locks up completely. No mouse, no keyboard, no Ctrl-Alt-Bksp to get out of X, nothing.
I'll outline my steps: Install Puppy using a "Full" HDD install (not "Frugal"). Copy the "devx_430.sfs" file (which I got from the Puppy website) from a thumb drive to the "my-documents" folder (although the exact location proabably doesn't matter). Mount it, cd to the mounted directory and execute "cp -a --remove-destination ./* /" and "sync". Copy the kernel source for 2.6.30.5 ("kernel_src-2.6.30.5-patched.sfs4.sfs") to the same directory. Mount it and execute the same commands as before. Copy the folder containing the RTL8192U drivers ("rtl8192u_linux_2.6.0006.1031.2008") to the root directory (i.e. "/"). cd to the folder in the terminal and run "make", "make install".Reboot the machine. Set up networking using the Puppy Internet Connection Wizard. HERE'S WHERE IT SCREWS UP: It connects, but after a while (e.g. just after logging into LQ through it, as a test) it freezes the entire system.
I have to do a hard reboot ("panic button"), then a soft reboot (for some odd reason the usb module won't load after a hard reboot, so the mouse won't work) to get the system working again, only to have it lock up again once it connects to the network.
Are these drivers broken? Outdated? Is there anything I can do to fix this? EDIT: I should add that this only occurs when the adapter is plugged in. If I boot the system with it unplugged, it works fine (probably because it never loads the kernel module).
View 11 Replies
View Related
Mar 28, 2011
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
View 4 Replies
View Related
Oct 20, 2010
This is my first linux install, Fresh install of Ubuntu 10.10, and first thing I do is update. I can't update because I get this message "The package System is broken Check if you are using third party repositories. If so disable them, since they are a common source of problems.
Furthermore run the following command in a Terminal: apt-get install -f"
This a brand new fresh install, how can there be problems already!?
In terminal I've tried " apt-get install -f" and get "E: Could not open lock file /var/lib/dpkg/lock - open (13: Permission denied) E: Unable to lock the administration directory (/var/lib/dpkg/), are you root?"
View 3 Replies
View Related
Jul 12, 2011
I have a somewhat old box that I want to install 11.04 on for experimentation. Eventually I'll want to run server and LVM, but for now I'm just going for simple. The box is an AMD 4800+ with 3 SATA hard drives. It previously ran Windows, but I've made every effort to blow all HD contents away and start fresh.The big picture problem is that I can't reliably get the system to boot from the SATA drives. After my first install of the 64-bit 11.04 from CD, it installed OK and booted fine. I then subsequently reinstalled the next day and the troubles began.
I've been booting into the "trial mode" from CD, then attempting to reinstall from there.After getting all the way through the setup, it gets to the grub install. It says that it can't install grub. It then offered to install it on the other /SD'x' devices (/SDA, /SDC, etc...) but failed to install grub there as well.Thinking there may have been leftover state from a previous install, I've tried blowing away all the contents of the 3 hard drives. However, I can't do that either. Running the "disk editor" from within the "trial" mode, any attempt to erase a partition is met with a failure, with the error message "daemon is inhibited".
So the two big questions I have are:1) Why is the grub install failing, and how can I deal with it?2) Is there some expectation of what the drives look like prior to an install? And if so, how go I get them into that state? I'm lost on how to "uninhibit the daemon"If it's helpful, I grabbed the relevant section of the log file that has what looks like more detailed errors from the grub install.
View 2 Replies
View Related
Jul 7, 2010
I just built a server, which displays 8 cores in the i7 processor. However, because of the 2 threads per core, it shows up as an 8 core system. When viewing htop, it shows system loads at 0.29,0.18, and 0.13 for respective averaging times. How would I calculate actual system load for this processor? Would I divide the average by 4 or 8? Or, is there another method?
View 7 Replies
View Related
Jun 23, 2011
I am a bit confused about a dual booting system. I Already have windows 7 on my computer and wish to install ubuntu 11.04 but I keep reading about Grub 2. Does grub automatically install with ubuntu or do I need to install it prior to installing ubutu ?
View 10 Replies
View Related
May 20, 2010
i installed kernel 2.6.34 to fix my lid closing issue, and that went great. but now when i go to reinstall my broadcom i get this error. Code: Reading package lists... Done Building dependency tree Reading state information... Done bcmwl-kernel-source is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 1 not upgraded. 1 not fully installed or removed. After this operation, 0B of additional disk space will be used. Setting up bcmwl-kernel-source (5.60.48.36+bdcom-0ubuntu3) ... Removing old bcmwl-5.60.48.36+bdcom DKMS files...
[Code].....
View 9 Replies
View Related
May 4, 2011
I don't understand the results of a simple performance test I ran using two basic scripts (running on a high end server):
perfVar.zsh :
#!/bin/zsh -f
MYVAR=`cat $1`
for i in {1..10}
[code]...
Performance test result:
> time ./perfVar.zsh BigTextFile > /dev/null
./perfVar.zsh FE > /dev/null 6.86s user 0.32s system 100% cpu 7.177 total
> time ./perfCat.zsh BigTextFile > /dev/null
./perfCat.zsh FE > /dev/null 0.01s user 0.10s system 91% cpu 0.118 total
I would have thought that accessing a VARIABLE was way faster than reading a FILE on the file system... Why this result ?Is there a way to optimize the perfCat.zsh script by reducing the number of accesses to the file system ?
View 3 Replies
View Related
Feb 6, 2010
i use Fluxbox (Mint in Karmic, but after few tweaks and updates i have to reinstall system-but i couldn't even make with gparted and usb-creator startup disk, so i used virtual machine in Mac OS to make some older version (Mint 7 XFCE).BUT, then i discovered that i can not even load the system from USB-although it was all set in bios to startup with USB Stick. How can i persuade my dell mini 10v to start up from live USB Stick.
View 7 Replies
View Related
Feb 24, 2010
I like the system beep because I can tell checkgmail to beep when an email comes, that way my speakers don't have to be on.Anyways, I did a fresh install of Karmic the other day. Something is being weird with me when I try to re-enable the beep. Karmic blacklisted pcspkr in /etc/modprobe.d/blacklist.conf . Here's what happens:I leave "blacklist pcspkr" in blacklist.conf and restart. I do "sudo modprobe pcspkr" and then "beep", and it beeps. Good.
Then I comment out "blacklist pcspkr" in blacklist.conf and restart. I do "beep". Nothing. I do "sudo modprobe pcspkr" and then "beep". Nothing. I do "lsmod | grep pcspkr". It's listed there as it should be. I check with "sudo grep pcspkr /var/log/dmesg" and find no errors.
View 3 Replies
View Related
Mar 27, 2010
it has been a year since I've started using Ubuntu linux, and for being calm that everything is working properly, I would like to do a full system check. The only option I've found is on System=> Administration=> System Testing, but this wasn't what I was searching for (mainly because I don't know what is written there- I don't know enough for running this option). Is there something else I can do? maybe something through Terminal?I want to run such a check also because the system sometimes work slowly, and maybe something went wrong...
View 9 Replies
View Related
Jan 1, 2010
A local store built a brand new dual core system for me about a month ago with a 1TB drive and installed Karmic on the entire drive. I now have a piece of external hardware that requires XP and simply will not work in XP in Virtualbox. I have purchased another 1TB drive, and my thinking is to create an XP partition of about 2-300GB and leave the rest of the drive for another Karmic partition and dual-boot. I don't care which drive is primary (unless there is a reason I should).
I was thinking of unplugging the karmic drive and putting the new drive in it, installing XP on it, then adding the Karmic drive back to the system and editing one of the boot files to add the other operating system.
If so, which boot file should I edit? Which drive should be primary? Or, is there a better, easier way to do this?
View 3 Replies
View Related
Feb 5, 2010
I have the System of 9.04, but have a Live CD of Ubuntu 9.10 too. But, I do not want to download all the massive Upgrades. Still, Ubuntu 9.10 is the best! So, can I upgrade 9.04 to 9.10 using the Live CD? (Offline).
View 2 Replies
View Related
Feb 16, 2010
Where can i get an image of all the ubuntu repositories for karmic koala? i am using a windows machine to download
View 9 Replies
View Related
Mar 8, 2010
My Ubuntu Karmic running system experiences random lockups. There is no pattern in when it will happen, it can go for days without one, or happen every couple hours. Only thing I can notice is that it happens most often when I run Firefox, but when it happens, it happens regardless of me having Firefox open on a website with lots of Flash content or not. When the lockup happens, I cannot move the mouse - the led light on my mouse shuts off, I can't move the cursor, the whole UI becomes unrensponsive, there is no blinking lights on the keyboard, REISUB does not work, only hitting the reset button on my case helps. After reboot, there are no indications of errors in any of the logs that I can see.I have ran memtest for 24 hours, and it completed without errors.
Additional information:
1. LSPCI output:
Code:
00:00.0 Host bridge: ALi Corporation M1697 HTT Host Bridge
00:01.0 PCI bridge: ALi Corporation PCI Express Root Port
00:02.0 PCI bridge: ALi Corporation PCI Express Root Port
[code]....
View 8 Replies
View Related
May 28, 2010
Last Monday I upgraded the Ubuntu from Karmic Koala to Lucid Lynx in my laptop (HP Compaq volna 515), and I have no sound. Searching in linux forums for an answers, I've got that (as far as I understand) there's no unique solution for this problem.
This is my lspci code...
Also, I tried to clean up the pulse audio .. What is funny for me is that pulse audio and alsa, and the audio players seems to work normally (no error of device not found or something like that).. except that there's no sound out from the speakers.
Any suggestion to discover if the problem is drivers, kernel, packages, or hardware failure? more important, how do I get the sound back?
View 5 Replies
View Related
