OpenSUSE Multimedia :: No Sound On Fresh 11.4 Installation
Mar 14, 2011
After spending a full day messing with my dual monitors displays-should-not-be-cloned-by-default, I have now come to the sound. The config looks like the 11.3 setup (I alternate partitions from one install to the next), but all I get is silence. KMix won't run. Amrok is silent. "Sound Configuration" gets me to a window showing two cards I know nothing about. I've got an nVIDIA chip on the mother board and the two cards listed are "M2N72-D w/ snd-hda-intel" and "Creative Tech, Ltd. w/ snd-usb-audio". I'd have gone back to 11.3 where this stuff works, but my configuration files were all auto-updated and don't really work any more. I guess I ought to have archived the config files, but I didn't and I'm here now.
lspci shows:
Code:
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
and some /var/log/messages entries:
Code:
Mar 14 14:18:22 beethoven kernel: [ 1120.311164] usbcore: deregistering interface driver snd-usb-audio
Mar 14 14:18:22 beethoven pulseaudio[21051]: pid.c: Stale PID file, overwriting.
Mar 14 14:18:22 beethoven pulseaudio[21102]: pid.c: Daemon already running.
Mar 14 14:18:22 beethoven kernel: [ 1120.800722] usbcore: registered new interface driver snd-usb-audio
Mar 14 14:18:38 beethoven pulseaudio[26008]: pid.c: Daemon already running.
Mar 14 14:18:39 beethoven pulseaudio[30854]: pid.c: Stale PID file, overwriting.
Mar 14 14:18:40 beethoven pulseaudio[30904]: pid.c: Daemon already running.
Mar 14 14:19:40 beethoven pulseaudio[30854]: ratelimit.c: 7 events suppressed
Mar 14 14:21:39 beethoven pulseaudio[30854]: ratelimit.c: 44 events suppressed
Mar 14 14:35:11 beethoven pulseaudio[30854]: ratelimit.c: 176 events suppressed
Mar 14 14:46:35 beethoven pulseaudio[30854]: ratelimit.c: 38 events suppressed
with duplicate events suppressed with ellipses by hand.
View 7 Replies
ADVERTISEMENT
Aug 12, 2010
I have a fresh install of openSUSE 11.3 (gnome) on my Dell Opxiplex380--but no sound... The hardware works because I can swap a Windows SATA HD into the CPU and test it. My alsa-info file is here: [URL]...
[code]....
View 9 Replies
View Related
Mar 10, 2011
Just installed OpenSUSE 11.4, and so far I love everything about it, the only thing that's not working is the sound. I have my sound card setup in YaST -> Sound like I always have, and it recognizes it as M-Audio Delta Audiophile 24/96. I also installed alsa-tools-gui to get Envy24Control for ICE1712 chipsets, and I unmuted all the outputs, and raised the DAC volume. My speakers are on, and all the cables check out. Here is all my multimedia information:
[Code]....
View 9 Replies
View Related
Oct 21, 2010
A fresh install of 11.3 64 KDE 4.4 some packman stuff installed. Some broken as no current 64 bit libs or funky packman situation currently. CD audio is choppy. No mp3 playback though support is installed. [URL]....
[Code]...
View 3 Replies
View Related
Sep 11, 2010
Following some problems of kernel upgrade, I have resinstalled my system. I now have some issues with sound. CD are recognized and played but no sound is coming out of my speakers (tested with amarok and caffeine). Same thing on .....: I see the video and get no sound.
However, I can hear the test sound form Configure Desktop / Multimedia
Any clue about what is going on?
View 8 Replies
View Related
Jan 14, 2010
Recently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
[Code]...
View 1 Replies
View Related
May 8, 2010
I just installed the latest version, updated it and everything, but I can't get my sound to work. I have an onboard sound card, and a Soundblaster too.
Here are the lspci results:
Quote:
And the aplay -l results:
Quote:
I'd like to be able to get my Soundblaster to work, cause I plan on dual booting with WinXp, but if the only way is the onboard way, I'm cool with it.
View 5 Replies
View Related
Apr 2, 2011
'm trying to set up at least 5.1 sound in my fresh ubuntu 10.10. I have stereo sound but failed when trying to set up the rest. I've googled it, read through couple of pages and tried the following:
- I've installed alsa 1.0.24
- I've added the following lines to /etc/pulse/daemon.conf
Code:
default-sample-channels = 6
default-channel-map = front-left,front-right,rear-left,rear-right,center,lfe
- I've added
Code:
options snd-hda-intel model=3stack-digout
to /etc/modprobe.d/alsa-base.conf
There is no 'Profile' button/menu in Sounds preferences/Hardware.
Code:
$speaker-test -Dplug:surround51 -c6
speaker-test 1.0.24.2
Playback device is plug:surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
[code].....
View 8 Replies
View Related
Jun 29, 2011
My sound was working fine when I was trying out Ubuntu on a partition, I was so chuffed with it I did a fresh install. I have no sound. VLC, Amarok, Clementine, Audacity, Audacious, every audio player in the Ubuntu Universe doesn't play sound. Obviously it's something 'hardware' or 'driver' connected because it all worked perfectly when I still had Windows as the 'host' partition. I'm not going back to Windows I'll try out OpenSuse or something to see if the sound thing happens on that.
View 2 Replies
View Related
Feb 17, 2010
I just installed karmic on my media server. With Jaunty, everything worked fine. I tried an upgrade, and go no sound. After poking around in the forms and trying some solutions still no sound.
So I decided to try a fresh install, again, no sound. I have cheched the obvious, mixer volumes, mute, output device, etc. But I can't seem to get it to work. I poked around in the forms and I've tried many of the solutions, but still no luck.
Here is my lspci output for my sound device...
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 8345
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
[Code].....
View 3 Replies
View Related
Dec 25, 2010
I just installed lubuntu 10.04 on an old machine and cant get the sound to work. I have been through the sticky but cant seem to see the problem. Heres the useful output:
[Code]...
View 1 Replies
View Related
Sep 15, 2010
I've never had any problems before,but I just did a fresh install of 10.04.1 on a brand new drive yesterday. I noticed this morning that I have no sound drivers(under the hardware tab of sound preferences, there is nothing listed). I found a thread that had this line to run:
Code:
cat /proc/asound/card0/codec#* | grep Codec
And I got:
Code:
Codec: Realtek ALC888
Not sure what to do now though.
View 1 Replies
View Related
Dec 15, 2010
I will tell you this: The hard ware is a MSI mother board [AMD flavored] [exact numbers, not known at the moment, but can be recovered]. The audio is built into the mother board. It worked fine with Ubuntu 10.04 I read a few posts here and there, and ran a hardware diagnostic. It came back and said no sound card was installed.
View 3 Replies
View Related
Mar 27, 2009
All, just did a freash install of fedora 10, and I have no sounds at all. Speakers work and are pluged in (everything works fine with my ubuntu partition) Nothing appears to be muted in alsa or on the gnome volume control Sound card = Creative Labs CA0106 Soundblaster
[code]...
View 4 Replies
View Related
May 5, 2010
I'm a Dell Optiplex 380 MT Workstation user which have a Intel HDA Integrated sound controller. I was using Ubuntu 9.10 32 Bits Karmic, and all works fine, but, two days ago I did a fresh install to Ubuntu 10.4 LTS 32 Bits Lucid. In Ubuntu 9.10 I didn't do nothing to make work all features of my workstation, but, in 10.4 LTS the sound don't work. The hardware appear in "Speaker Icon" and in the alsamixer menu, but nothing works. It's happens in the Live CD, Installation in Hard Disc, 32 Bits Version and 64 Bits version.
Here is the output of the command, in Ubuntu 9.10 & Ubuntu 10.4. The only difference that I see is the follow in lspci (bold text):
lspci
Ubuntu 9.10: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Ubuntu 10.4: 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
At both version this is the which use (same output):
cat /proc/asound/card0/codec#0
Codec: Realtek ALC269
I've installed linux-backports-modules-alsa-2.6.32-21-generic-pae, reboot system and nothing happens.
lsmod | grep snd
Ubuntu 9.10 .....
View 9 Replies
View Related
Aug 6, 2010
I am having trouble getting sound working under a brand new install of OpenSUSE 11.3. I am new to both SUSE and anything that's not Debian based, so please understand if I'm not able to comprehend a lot of what you say quickly. After a successful install, I attempted to play an MP3 file. This did not work in Amarok, and installation of it would also not work. So I went to this site, openSUSE 11.3 | SUSE Linux | Beginner's guide to multimedia codecs MP3 DVD 3D nvidia ati wireless and installed the multimedia codecs and all that. While I was there I also installed the ATI driver for my ATI Mobility Radeon HD 4250 onboard chip. After booting back up, x would not start, so I fixed that with a command. After finally getting into X, sound wouldn't work, and I con not figure out why. I know if it installed something the affects my audio.
View 2 Replies
View Related
Jun 5, 2010
I just installed Ubuntu 10.0.4 and it asked me only set up one application / os user credentials (which I did). After the installation, I came to know that I wasn't able to listen sound from the speakers. Now, in order to fix that issue; I've to install an upgraded driver for my sound card (which I got) but when I run the following command:
it is to create / remove some directories in usr/include/sound directory. user of this directory is root and i get the permissions denied message. I tried to switch as root user but authentication gets failed every time.
View 3 Replies
View Related
Sep 13, 2010
I have a pretty fresh install of Ubuntu with Audacious 2.4 RC2 installed. For the first few days it ran fine, since Saturday it keeps crashing literally 1-2 seconds after opening it.
View 9 Replies
View Related
Jun 14, 2011
I have suse 11.4 installed and I wish to replace the on-board sound chip with an add-on sound card. The following are available at my local shop but they cannot advise whether any will work on Linux Suse 11.4.
Anyone know which of these cards will work on Suse 11.4?
Sound Blaster X-Fi Titanium HD
Sound Blaster X-Fi Xtreme Audio
Asus Xonar DS
View 9 Replies
View Related
Jun 24, 2011
I recently bought a set of 2.1 speakers, all is fine. I like to listen to my DAB radio through them. When I boot up, (runlevel 3), sound is there via the mic/line-in jack, but as soon as KDE starts, the sound cuts. I can get it back by:~>alsamixerand then F6 and then scroll to mic, switching to ON and slider up to full and then mic boost up to 65% or so.Can I tell something in KDE to default to mic/line-in on?kmix does not give the full picture I see in other's posts, like here:ImageShack® - Online Photo and Video Hostingjust a single slider under each tab, like this:
View 9 Replies
View Related
Dec 29, 2009
openSUSE 11.2 64bit
libxine1 from Packman
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Maybe it's just an Amarok2 problem, but whenever another app (for example Konversation) plays a sound file, the audio instantly cuts out (in Amarok2) and will not come back unless I quit Amarok2 and restart it.
Amarok2 has only the options - "HDA ATI SB VT 1708S Analog" or "PulseAudio" (which is NOT installed).
alsa-info here - [URL]
Also I am totally confused by the mixer, it has so many knobs that I am totally lost!
here's a lovely pic - [URL]
View 4 Replies
View Related
Feb 9, 2010
I encountered this on a 10.3 system but there might be similar problem with the 11 series. Having gone through the business of obtaining config info on this card via pnpdump and subsequently using Yast to configure and install it, I encountered a situation whereby the card was fully functional as far as the "Test Sound" option of Yast was concerned. However, after a reboot, it was not loaded and no sound was possible. Debugging the "alsasound" script, I discovered that the directory /proc/asound was not in place at that time and, therefore, sound was not started.
The solution was to add the module name (snd_sbawe) to /etc/sysconfig/kernel to the parameter "MODULES_LOADED_ON_BOOT". Seems like Yast did not see a reason to do this itself.
View 1 Replies
View Related
Jun 24, 2010
I recently installed the x64 rpm of OSS on my Opensuse 11.2 installation (alsa does not have drivers for my lynx card). Sound works beautifully in KDE (login sounds, apps produce sound, etc), EXCEPT for firefox. I can get no sound at all from firefox. I am baffled at why only firefox does not play audio.
System:
OpenSuse 11.2 (it is a pretty fresh install)
OpenSoundSystem 4.2
KDE 4.4 (updated from factory repos)
View 3 Replies
View Related
Oct 17, 2010
I have configured my sound drivers many times. After doing this i am able to listen a sound. But after booting there is necessary to configure them again. So is there a any way for permanent configuration.
View 2 Replies
View Related
Aug 24, 2010
I have decided to move my laptop over to openSUSE after a terrible experience with Vista. I have some experience with Ubuntu on a desktop, but I'm a brand new suse user. I installed 11.3 but haven't been able to get any sound out of it.
The laptop is a Compaq Presario CQ45-307tx (more specs at link below)
Product Specifications Compaq Presario CQ45-307TX Notebook PC - HP Customer Care (Brazil - English)
Here is the ALSA support url per the instructions in the multimedia sticky [url]
View 1 Replies
View Related
Oct 17, 2010
I have configured my sound drivers several time. But after booting there is no sound.
View 9 Replies
View Related
Jun 2, 2010
I have tried to install openSuse several times and the same problem would persistRight after installation, when the prompt to log in shows up, I enter a username and a password, but it says that login failed. I am sure I type in the correct data as I have written down the username and the password I register during the installation.Also, after the installation finishes, the computer restarts automatically, though instead of restarting it goes into a mode similar to stand by. The screen is blank and the media buttons of the keyboard are lit, but nothing happens, so I just restart manually. Could this have something to do with it
View 2 Replies
View Related
Apr 26, 2010
my suse 11.2 no detected sound my asus p5kpl hda7 i am install alsa driver's not work i need
View 1 Replies
View Related
Jul 27, 2011
I'm trying to get my Adaptec RAID 6405 working on fresh Opensuse 11.4.I need to make a driver/module for this because aacraid module doesn't see the raid controller.
modinfo aacraid
filename: /lib/modules/2.6.37.6-0.5-default/kernel/drivers/scsi/aacraid/aacraid.ko
version: 1.1-5[26400]-ms
[code]....
How to make a driver/module for a fresh opensuse 11.4 installation ?
View 4 Replies
View Related
May 3, 2011
I installed openSUSE today using a network installer cd, opting for the Xfce environment. Everything went smooth with the installer, but I have some issues with the network. After the fresh install, nm-applet did not start. I got the following error:
Code:
nm-applet
** Message: applet now removed from the notification area
** Message: applet now embedded in the notification area
** (nm-applet:14981): WARNING **: Fallback icon 'gtk-dialog-error' missing: (0) Icon 'gtk-dialog-error' not present in theme
**
ERROR:applet.c:2800:nma_icons_reload: assertion failed: (applet->fallback_icon) Aborted I don't know if the problem was with the applet or with the daemon. Fortunately I used Archlinux for a quite long time and I know how to connect to WPA2 encrypted wireless network from command line, so I was able to connect to the internet and do an upgrade - everything went just smooth and fine again.
After the update and restart, I found the nm-applet icon in the system tray. And here comes the second problem: I can connect with the nm-applet, but the connection does lasts only for about 10 seconds. So practically I can't use the net this way either. Ok, no problem, I fired up Yast, disabled the networkmanager and choose to start my network with the traditional method. I entered the required stuff from my wireless card ( ESSID and passwd ), set to activate at boot time and reboot.....
View 4 Replies
View Related
