After successfully installing Debian 5.0 stable from a CD, I noticed that there wasn't any sound. I unmuted the volume in Debian itself and there still wasn't any sound! I ran alsaconf and it came up as a VIA VT8233/A/8 sound card.
View 3 RepliesI haven't used Debian in 1 year or so and would like to know if there is any possible way to do a fresh installation of Debian Lenny or Squeeze (either or) and not install Exim? I get to the package selection section of the Debian Installer and I de-select "Desktop Environment" & "Standard System" so nothing is selected and it still be default installs Exim. Is there a way to omit this from the install?
View 9 Replies View RelatedI just installed Debian 6 & prior to my first update my sound worked fine. But after accepting all the updates based on the repositories below the system can't identify my sound card.
deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110112-01:05]/ squeeze main
[URL]
Sound Card (1st one / second is built in audio on a video card)
joe@Tux-Box:~$ lspci | grep -i audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: nVidia Corporation Device 0be9 (rev a1)
Errors (outside of just not being able to play any audio)
joe@Tux-Box:~$ alsamixer
Cannot open mixer: No such file or directory
When I try to open sound applet in pannel ->
No volume control GStreamer plugins and/or devices found.
joe@Tux-Box:~$ cat /proc/asound/cards
--- no soundcards ---
- The user is part of the audio group.
- I was playing around with run levels and if I
ctl -alt F2
log in as user
su -
password
init 5
hit reset on the computer.
When it reboots I have sound. I attempted changing /etc/inittab but after rebooting no sound. I am still unsure of what to do.
# The default runlevel.
id:5:initdefault:
# was 2 above at install - sound came on at 5
I have an HDMI connected monitor with speakers but I don't get any sound after a fresh install. My computer ain't nothing fancy, my specifications can be found in my current board signature.
I have zero experience configuring devices on Linux. It's rather depressing not being able to listen to music.
I downloaded and installed a fresh ISO and already installed it 3 times in my PC but after a seemingly good installation, my machine would shutdown when I try to boot my freshly installed lenny. It was a good CD. I encountered no error reports while installing but I can't understand why after I click on Debian lenny in the grub, it would act as if it were booting and then suddenly shutdown.
View 12 Replies View RelatedI just did a regular install of debian lenny on a stand-alone machine. Now I want to add some new mp3-software. Debian doesn't like it if I install as root. A regular gets other negative results:
wlff@debian:~/My_Apps/mpg321-0.2.12-1$ ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... no
checking for gawk... (cached) mawk
checking for gcc... no
checking for cc... no
checking for cc... no
checking for cl... no
configure: error: no acceptable C compiler found in $PATH
See `config.log' for more details.
wlff@debian:~/My_Apps/mpg321-0.2.12-1$
I did find the GNU-compiler in /usr/lib/gcc. So what could be wrong with gcc, and what about gawk, cc and cl?
Recently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
[Code]...
i was trying to use gnome and kde but i don't like them. I tried xfce and it seem to fit my needs but.My computer is used to be powered on for a weeks. While time passes, a process xfdesktop begin to use more and more memory and to free RAM i need to log out and log in again.
I tried squeeze yesterday on my virtual machine and it has 4.6 and seem not to have that bug, RAM usage is static(yes it still works when i write this and have memory usage 34492k, which is not changing for an hours of usage already), also 4.6 is MUCH better than 4.4.
i already tried adding squeeze to "sources.list" but i can see too many dependencies which should be upgraded if i install 4.6, i'm beginning to afraid it can crash entire GUI(or entire system, i can see there is libc6 required to be updated).
recently installed lenny (5.0.4). I can't get any sound whatsoever (except pc speaker). I had to muck around with vlc to get video working, that works fine but there's still no sound. I have a C-media CMI8738 sound card, I've run alsaconf in root which seems to work fine, I've mucked around with alsamixer (v1.0.16) changing volumes and muting things but haven't had any change. Computer is an AMD Athlon xp2500.
View 5 Replies View RelatedI installed debian lenny on a compaq computer with 383Mb Ram, a P3 processor, on a 996Mb Partition. Then I ran Code: #apt-get install xserver-xorg-core xorg alsa-base alsa-utils hal udev xfce4 xfce4-goodies xfce4-mixer xfce4-mixer-alsa thunar-archive-plugin sudo slim Everything installed OK so I ran Code: $sudo alsaconf Everything worked OK until the end, then I get the error,
Code: Loading driver...
Setting default volumes...
amixer: Muxer attach default error: No such file or directory
Now ALSA is ready to use. For adjustment of volumes, use your favorite mixer.
Have a lot of fun! and when I run Code: $aplay /usr/share/sounds/Front_Center.wav I get Code: ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ALSA lib conf.c:3513:(_snd_config_evaluate) function snd_func_card_driver returned error: No such file or directory
[Code]....
I'm using Debian Lenny, the only problem that I have is that the sound card isn't recognize by the system, I have installed ALSA 1.0.20 and I followed several tutorials trying to enable my sound card (ATI tech Azalia (Intel HDA)but all tries fail.
So, after install another distro in the same pc I figured out that the sound card is enable and running by default, the ALSA version is the same -1.0.20- but the kernel is different -2.6.31.xx- so my questions are:
1. do you recommend me to upgrade my lenny's kernel to fix the problem?
2. is there a way to upgrade specific packages -for example samba, alsa, kernel- using unstable or testing versions instead of upgrade the entire distro? actually I'm confortable with lenny
3. what configuration should I check in the "other" distro to use that parameters in lenny?
I dont ve any sound in my F12 fresh install. i ve updated it but i didnt check if the sound was workin earlier. My laptop is compaq presario Cq60.
I disabled pulse audio from startup and create the client.conf file in .pulse folder with the following code:
Code:
I'm using Debian Lenny, the only problem that I have is that the sound card isn't recognize by the system, I have installed ALSA 1.0.20 and I followed several tutorials trying to enable my sound card (ATI tech Azalia (Intel HDA)but all tries fail.
So, after install another distro -debian based- in the same pc I figured out that the sound card is enable and running by default, the ALSA version is the same -1.0.20- but the kernel is different -2.6.31.xx- so my questions are:
1. do you recommend me to upgrade my lenny's kernel to fix the problem?
2. is there a way to upgrade specific packages -for example samba, alsa, kernel- using unstable or testing versions instead of upgrade the entire distro? actually I'm confortable with lenny
3. what configuration should I check in the "other" distro to use that parameters in lenny?
I have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.
View 2 Replies View RelatedI installed debian lenny recently and everything working fine except the sound device.
My laptop specs are code...
I recently reinstalled Debian. Previously I had sound working in schroot without a problem. I simply added the user to the audio group ran alsaconf and it worked.Alsaconf has been removed from squeeze so I tried from Lenny. Alsaconf installs but does not find the sound card in the schroot. In deed it seems to be looking for amd64 modules (those of the host system).
View 1 Replies View RelatedFollowing some problems of kernel upgrade, I have resinstalled my system. I now have some issues with sound. CD are recognized and played but no sound is coming out of my speakers (tested with amarok and caffeine). Same thing on .....: I see the video and get no sound.
However, I can hear the test sound form Configure Desktop / Multimedia
Any clue about what is going on?
I have a fresh install of openSUSE 11.3 (gnome) on my Dell Opxiplex380--but no sound... The hardware works because I can swap a Windows SATA HD into the CPU and test it. My alsa-info file is here: [URL]...
[code]....
Just installed OpenSUSE 11.4, and so far I love everything about it, the only thing that's not working is the sound. I have my sound card setup in YaST -> Sound like I always have, and it recognizes it as M-Audio Delta Audiophile 24/96. I also installed alsa-tools-gui to get Envy24Control for ICE1712 chipsets, and I unmuted all the outputs, and raised the DAC volume. My speakers are on, and all the cables check out. Here is all my multimedia information:
[Code]....
I just installed the latest version, updated it and everything, but I can't get my sound to work. I have an onboard sound card, and a Soundblaster too.
Here are the lspci results:
Quote:
And the aplay -l results:
Quote:
I'd like to be able to get my Soundblaster to work, cause I plan on dual booting with WinXp, but if the only way is the onboard way, I'm cool with it.
I tried Intrepid on this computer a few years back, and remember sweating over my computer for days trying to get the sound to work, before eventually giving up and going back to Windows. Now I figured I'd give it a second go. 100% fresh install, Lucid Lynx. I was hoping maybe the new version would have fixed whatever I was having trouble with before. No such luck. Have checked that nothing is muted, in the tray icon and in alsamixer and in a bunch of others. Have made sure that I'm in all the proper groups.
"aplay -l" gives me:
**** List of PLAYBACK Hardware Devices ****
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4]
Subdevices: 1/1
[code]....
My sound was working fine when I was trying out Ubuntu on a partition, I was so chuffed with it I did a fresh install. I have no sound. VLC, Amarok, Clementine, Audacity, Audacious, every audio player in the Ubuntu Universe doesn't play sound. Obviously it's something 'hardware' or 'driver' connected because it all worked perfectly when I still had Windows as the 'host' partition. I'm not going back to Windows I'll try out OpenSuse or something to see if the sound thing happens on that.
View 2 Replies View RelatedAll, just did a freash install of fedora 10, and I have no sounds at all. Speakers work and are pluged in (everything works fine with my ubuntu partition) Nothing appears to be muted in alsa or on the gnome volume control Sound card = Creative Labs CA0106 Soundblaster
[code]...
I just installed karmic on my media server. With Jaunty, everything worked fine. I tried an upgrade, and go no sound. After poking around in the forms and trying some solutions still no sound.
So I decided to try a fresh install, again, no sound. I have cheched the obvious, mixer volumes, mute, output device, etc. But I can't seem to get it to work. I poked around in the forms and I've tried many of the solutions, but still no luck.
Here is my lspci output for my sound device...
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 8345
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
[Code].....
I just installed lubuntu 10.04 on an old machine and cant get the sound to work. I have been through the sticky but cant seem to see the problem. Heres the useful output:
[Code]...
I did was install MInt 9 on it. Everything is going well except no sound at all. Not even the 'start up chime' of any music/videos. I have the volume buttons working on the laptop and I have checked sound preferences and nothing is muted. I did not dig much further as I have learned with mint and ubuntu that can create problems. This is a fresh install and no sound from the get go. How should I proceed to trouble shoot?
[code]....
A fresh install of 11.3 64 KDE 4.4 some packman stuff installed. Some broken as no current 64 bit libs or funky packman situation currently. CD audio is choppy. No mp3 playback though support is installed. [URL]....
[Code]...
I've never had any problems before,but I just did a fresh install of 10.04.1 on a brand new drive yesterday. I noticed this morning that I have no sound drivers(under the hardware tab of sound preferences, there is nothing listed). I found a thread that had this line to run:
Code:
cat /proc/asound/card0/codec#* | grep Codec
And I got:
Code:
Codec: Realtek ALC888
Not sure what to do now though.
I will tell you this: The hard ware is a MSI mother board [AMD flavored] [exact numbers, not known at the moment, but can be recovered]. The audio is built into the mother board. It worked fine with Ubuntu 10.04 I read a few posts here and there, and ran a hardware diagnostic. It came back and said no sound card was installed.
View 3 Replies View RelatedI'm a Dell Optiplex 380 MT Workstation user which have a Intel HDA Integrated sound controller. I was using Ubuntu 9.10 32 Bits Karmic, and all works fine, but, two days ago I did a fresh install to Ubuntu 10.4 LTS 32 Bits Lucid. In Ubuntu 9.10 I didn't do nothing to make work all features of my workstation, but, in 10.4 LTS the sound don't work. The hardware appear in "Speaker Icon" and in the alsamixer menu, but nothing works. It's happens in the Live CD, Installation in Hard Disc, 32 Bits Version and 64 Bits version.
Here is the output of the command, in Ubuntu 9.10 & Ubuntu 10.4. The only difference that I see is the follow in lspci (bold text):
lspci
Ubuntu 9.10: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Ubuntu 10.4: 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
At both version this is the which use (same output):
cat /proc/asound/card0/codec#0
Codec: Realtek ALC269
I've installed linux-backports-modules-alsa-2.6.32-21-generic-pae, reboot system and nothing happens.
lsmod | grep snd
Ubuntu 9.10 .....