I just installed lubuntu 10.04 on an old machine and cant get the sound to work. I have been through the sticky but cant seem to see the problem. Heres the useful output:
[Code]...
I just installed the latest version, updated it and everything, but I can't get my sound to work. I have an onboard sound card, and a Soundblaster too.
Here are the lspci results:
Quote:
And the aplay -l results:
Quote:
I'd like to be able to get my Soundblaster to work, cause I plan on dual booting with WinXp, but if the only way is the onboard way, I'm cool with it.
My sound was working fine when I was trying out Ubuntu on a partition, I was so chuffed with it I did a fresh install. I have no sound. VLC, Amarok, Clementine, Audacity, Audacious, every audio player in the Ubuntu Universe doesn't play sound. Obviously it's something 'hardware' or 'driver' connected because it all worked perfectly when I still had Windows as the 'host' partition. I'm not going back to Windows I'll try out OpenSuse or something to see if the sound thing happens on that.
View 2 Replies View RelatedI just installed karmic on my media server. With Jaunty, everything worked fine. I tried an upgrade, and go no sound. After poking around in the forms and trying some solutions still no sound.
So I decided to try a fresh install, again, no sound. I have cheched the obvious, mixer volumes, mute, output device, etc. But I can't seem to get it to work. I poked around in the forms and I've tried many of the solutions, but still no luck.
Here is my lspci output for my sound device...
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 8345
Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
Memory at fcf78000 (32-bit, non-prefetchable) [size=16K]
[Code].....
I have a fresh install of openSUSE 11.3 (gnome) on my Dell Opxiplex380--but no sound... The hardware works because I can swap a Windows SATA HD into the CPU and test it. My alsa-info file is here: [URL]...
[code]....
Just installed OpenSUSE 11.4, and so far I love everything about it, the only thing that's not working is the sound. I have my sound card setup in YaST -> Sound like I always have, and it recognizes it as M-Audio Delta Audiophile 24/96. I also installed alsa-tools-gui to get Envy24Control for ICE1712 chipsets, and I unmuted all the outputs, and raised the DAC volume. My speakers are on, and all the cables check out. Here is all my multimedia information:
[Code]....
I've never had any problems before,but I just did a fresh install of 10.04.1 on a brand new drive yesterday. I noticed this morning that I have no sound drivers(under the hardware tab of sound preferences, there is nothing listed). I found a thread that had this line to run:
Code:
cat /proc/asound/card0/codec#* | grep Codec
And I got:
Code:
Codec: Realtek ALC888
Not sure what to do now though.
I will tell you this: The hard ware is a MSI mother board [AMD flavored] [exact numbers, not known at the moment, but can be recovered]. The audio is built into the mother board. It worked fine with Ubuntu 10.04 I read a few posts here and there, and ran a hardware diagnostic. It came back and said no sound card was installed.
View 3 Replies View RelatedA fresh install of 11.3 64 KDE 4.4 some packman stuff installed. Some broken as no current 64 bit libs or funky packman situation currently. CD audio is choppy. No mp3 playback though support is installed. [URL]....
[Code]...
Sounds drivers not working properly after fresh install of Natty.
View 3 Replies View RelatedRecently installed Ubuntu 9.1 following an easy how to. The install session went really well, smooth and only had one little speed bump when deciding which drive to install to (running raid and did not want to loose other partition). Like most speed bumps I got passed it. Ran all the updates then decided to start listening to music with Rythmbox Music Player. The sound coming out of my Klipsch Pro Media 4.1 was muffled and sounded like just the subwoofer was on. I checked all connections and they were fine. I tried looking for equalizer but did not find it and then noticed the sound was like a skipping record. So I looked it up and came across some posts that I could not figure out if they were for my problem. Seemed to me they were just leading me in circles.
[Code]...
'm trying to set up at least 5.1 sound in my fresh ubuntu 10.10. I have stereo sound but failed when trying to set up the rest. I've googled it, read through couple of pages and tried the following:
- I've installed alsa 1.0.24
- I've added the following lines to /etc/pulse/daemon.conf
Code:
default-sample-channels = 6
default-channel-map = front-left,front-right,rear-left,rear-right,center,lfe
- I've added
Code:
options snd-hda-intel model=3stack-digout
to /etc/modprobe.d/alsa-base.conf
There is no 'Profile' button/menu in Sounds preferences/Hardware.
Code:
$speaker-test -Dplug:surround51 -c6
speaker-test 1.0.24.2
Playback device is plug:surround51
Stream parameters are 48000Hz, S16_LE, 6 channels
[code].....
After spending a full day messing with my dual monitors displays-should-not-be-cloned-by-default, I have now come to the sound. The config looks like the 11.3 setup (I alternate partitions from one install to the next), but all I get is silence. KMix won't run. Amrok is silent. "Sound Configuration" gets me to a window showing two cards I know nothing about. I've got an nVIDIA chip on the mother board and the two cards listed are "M2N72-D w/ snd-hda-intel" and "Creative Tech, Ltd. w/ snd-usb-audio". I'd have gone back to 11.3 where this stuff works, but my configuration files were all auto-updated and don't really work any more. I guess I ought to have archived the config files, but I didn't and I'm here now.
lspci shows:
Code:
00:07.0 Audio device: nVidia Corporation MCP72XE/MCP72P/MCP78U/MCP78S High Definition Audio (rev a1)
and some /var/log/messages entries:
Code:
Mar 14 14:18:22 beethoven kernel: [ 1120.311164] usbcore: deregistering interface driver snd-usb-audio
Mar 14 14:18:22 beethoven pulseaudio[21051]: pid.c: Stale PID file, overwriting.
Mar 14 14:18:22 beethoven pulseaudio[21102]: pid.c: Daemon already running.
Mar 14 14:18:22 beethoven kernel: [ 1120.800722] usbcore: registered new interface driver snd-usb-audio
Mar 14 14:18:38 beethoven pulseaudio[26008]: pid.c: Daemon already running.
Mar 14 14:18:39 beethoven pulseaudio[30854]: pid.c: Stale PID file, overwriting.
Mar 14 14:18:40 beethoven pulseaudio[30904]: pid.c: Daemon already running.
Mar 14 14:19:40 beethoven pulseaudio[30854]: ratelimit.c: 7 events suppressed
Mar 14 14:21:39 beethoven pulseaudio[30854]: ratelimit.c: 44 events suppressed
Mar 14 14:35:11 beethoven pulseaudio[30854]: ratelimit.c: 176 events suppressed
Mar 14 14:46:35 beethoven pulseaudio[30854]: ratelimit.c: 38 events suppressed
with duplicate events suppressed with ellipses by hand.
Sound worked great under opensuse 11.1 but I upgraded to Opensuse 11.2 and now can not get it working. The information the sticky says to provide is below. I have Checked all of the volumn controls all are set to approx. 75%. Running the sound test in "Yast/hardware/sound/options/play test sound" works...plays the sound
speaker-test -Dplug:front -c2 -l5 -twav doesn't work - no sound
speaker-test -c2 -l5 -twav doesn't work - no sound
rpm -q alsa alsa-utils alsa-firmware returns....
alsa-1.0.21-3.2.i586
alsa-utils-1.0.21-3.1.i586
alsa-firmware-1.0.20-3.2.noarch
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.20.
cat /proc/asound/modules
0 snd_hda_intel
cat /proc/asound/cards
[code]....
I tried Intrepid on this computer a few years back, and remember sweating over my computer for days trying to get the sound to work, before eventually giving up and going back to Windows. Now I figured I'd give it a second go. 100% fresh install, Lucid Lynx. I was hoping maybe the new version would have fixed whatever I was having trouble with before. No such luck. Have checked that nothing is muted, in the tray icon and in alsamixer and in a bunch of others. Have made sure that I'm in all the proper groups.
"aplay -l" gives me:
**** List of PLAYBACK Hardware Devices ****
card 0: I82801DBICH4 [Intel 82801DB-ICH4], device 0: Intel ICH [Intel 82801DB-ICH4]
Subdevices: 1/1
[code]....
I dont ve any sound in my F12 fresh install. i ve updated it but i didnt check if the sound was workin earlier. My laptop is compaq presario Cq60.
I disabled pulse audio from startup and create the client.conf file in .pulse folder with the following code:
Code:
I did was install MInt 9 on it. Everything is going well except no sound at all. Not even the 'start up chime' of any music/videos. I have the volume buttons working on the laptop and I have checked sound preferences and nothing is muted. I did not dig much further as I have learned with mint and ubuntu that can create problems. This is a fresh install and no sound from the get go. How should I proceed to trouble shoot?
[code]....
After successfully installing Debian 5.0 stable from a CD, I noticed that there wasn't any sound. I unmuted the volume in Debian itself and there still wasn't any sound! I ran alsaconf and it came up as a VIA VT8233/A/8 sound card.
View 3 Replies View RelatedFollowing some problems of kernel upgrade, I have resinstalled my system. I now have some issues with sound. CD are recognized and played but no sound is coming out of my speakers (tested with amarok and caffeine). Same thing on .....: I see the video and get no sound.
However, I can hear the test sound form Configure Desktop / Multimedia
Any clue about what is going on?
I just installed Debian 6 & prior to my first update my sound worked fine. But after accepting all the updates based on the repositories below the system can't identify my sound card.
deb cdrom:[Debian GNU/Linux 6.0.0 _Squeeze_ - Official Snapshot amd64 LIVE/INSTALL Binary 20110112-01:05]/ squeeze main
[URL]
Sound Card (1st one / second is built in audio on a video card)
joe@Tux-Box:~$ lspci | grep -i audio
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA) (rev 40)
01:00.1 Audio device: nVidia Corporation Device 0be9 (rev a1)
Errors (outside of just not being able to play any audio)
joe@Tux-Box:~$ alsamixer
Cannot open mixer: No such file or directory
When I try to open sound applet in pannel ->
No volume control GStreamer plugins and/or devices found.
joe@Tux-Box:~$ cat /proc/asound/cards
--- no soundcards ---
- The user is part of the audio group.
- I was playing around with run levels and if I
ctl -alt F2
log in as user
su -
password
init 5
hit reset on the computer.
When it reboots I have sound. I attempted changing /etc/inittab but after rebooting no sound. I am still unsure of what to do.
# The default runlevel.
id:5:initdefault:
# was 2 above at install - sound came on at 5
I have an HDMI connected monitor with speakers but I don't get any sound after a fresh install. My computer ain't nothing fancy, my specifications can be found in my current board signature.
I have zero experience configuring devices on Linux. It's rather depressing not being able to listen to music.
All, just did a freash install of fedora 10, and I have no sounds at all. Speakers work and are pluged in (everything works fine with my ubuntu partition) Nothing appears to be muted in alsa or on the gnome volume control Sound card = Creative Labs CA0106 Soundblaster
[code]...
I'm a Dell Optiplex 380 MT Workstation user which have a Intel HDA Integrated sound controller. I was using Ubuntu 9.10 32 Bits Karmic, and all works fine, but, two days ago I did a fresh install to Ubuntu 10.4 LTS 32 Bits Lucid. In Ubuntu 9.10 I didn't do nothing to make work all features of my workstation, but, in 10.4 LTS the sound don't work. The hardware appear in "Speaker Icon" and in the alsamixer menu, but nothing works. It's happens in the Live CD, Installation in Hard Disc, 32 Bits Version and 64 Bits version.
Here is the output of the command, in Ubuntu 9.10 & Ubuntu 10.4. The only difference that I see is the follow in lspci (bold text):
lspci
Ubuntu 9.10: 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
Ubuntu 10.4: 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High Definition Audio Controller (rev 01)
At both version this is the which use (same output):
cat /proc/asound/card0/codec#0
Codec: Realtek ALC269
I've installed linux-backports-modules-alsa-2.6.32-21-generic-pae, reboot system and nothing happens.
lsmod | grep snd
Ubuntu 9.10 .....
I just built my PC and loaded ubuntu on it. When the ubuntu desktop comes up everything looks ok. but when I click on any of the drop down menus, or anything else for that matter, the computer freezes immediately. I,ve tried copying the iso boot file to a new cd and reloading ubuntu but the problem remains. I've also tried removing one of the two ram sticks but again, the problem remains.
PC specs:
Intel dh55hc board
Intel i3 cpu 3ghz
2 Corsair 2gb RAM sticks
750 western digital HD
Sony lightscribe DVD drive
I just installed ubuntu 10 on my pc and unfortunatly I don't have internet. I only have one pc wired to my 2wire modem. I want to use dhcp, no static ip if possible.
View 5 Replies View RelatedJust did a fresh install of Ubuntu 10.10 sudo not working. This is the message I get.
hewjr@Hewjr:~$ sudo
usage: sudo -h | -K | -k | -L | -V
usage: sudo -v [-AknS] [-p prompt]
usage: sudo -l[l] [-AknS] [-g groupname|#gid] [-p prompt] [-U username] [-u username|#uid] [-g groupname|#gid] [command]
usage: sudo [-AbEHknPS] [-C fd] [-g groupname|#gid] [-p prompt] [-u username|#uid] [-g groupname|#gid] [VAR=value] [-i|-s] [<command>]
usage: sudo -e [-AknS] [-C fd] [-g groupname|#gid] [-p prompt] [-u username|#uid] file ...
hewjr@Hewjr:~$
I installed Ubuntu 10.04 from a Live CD today. Everything seemed to go fine, I chose to wipe the entire disk. However, it would only startup once. Now, when I turn on my laptop, all I get is a blank screen.
I had a look at my partitions with GParted on the Live CD and noticed that there was a 1 MiB unallocated space just before it. code...
I just got done with a fresh install of 11.04. So far I like the new update and face lift. The only thing I do not like is that I can not use my laptops WiFi I have a Compaq Presario V5101US. Below info is from doing lspci command in the terminal...
Code:
Network controller: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller (rev 02)
Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139/8139C/8139C+ (rev 10)
Playing a song works at first; then it quits after 1-5 minutes. If you select a different output device, it will work for another 1-5 minutes, but switching back to an already used up device will not play sound. Running 'sudo killall pulseaudio' resets everything and each output device works for another 1-5 minutes. This is on on 9.10.
Code:
lspci -v
00:00.0 Host bridge: Intel Corporation 82845G/GL[Brookdale-G]/GE/PE DRAM Controller/Host-Hub Interface (rev 02)
Subsystem: EPoX Computer Co., Ltd. Device 4002
[code]....
I just installed 9.10 to a dell inspiron 531s and neither the ethernet nor the wireless will find a signal. The results of sudo lshw -c network are
*-network
product: BCM4318 [AirForce One 54g] 802.11g wireless LAN controller
vendor: Broadcom Corporation
[code]...