Ubuntu :: Ext3 Partition Recognized Incorrectly As Silicon_medley_raid_member?
Mar 21, 2011
I have a very strange issue. I have a desktop Ubuntu 10.04 system that has worked just fine for months. Now suddenly grub won't find the root partition which is an ext3 partition (/dev/sda2).The strange thing about this -- I can boot with the install CD and can mount it just fine when using mount -t ext3. If I don't supply the "ext3" type however it identifies the type as "silicon_medley_raid_member" and can't mount it. If I go into the Ubuntu 10.04 Admin>Disk Utilty -- it too identifies the type of the partition as "silicon_medley_raid_member" not ext3. Same with blkid -p. With that I get:
/dev/sda2: VERSION="42758.8269" TYPE="silicon_medley_raid_member" USAGE="raid"I have other ext3 partitions that are recognized OK. When I mount the strange partition forcing ext3 -- it too seems ok. I ran fsck.ext3 on it -- with -f - and no errors were found. I backed up the partition with tar -- again -- no errors archiving. I've even tried zeroing the first 1024 bytes of the partition -- that had no effect on this issue.So what is going on with this. Any ideas? Any ideas how to fix this issue? What am I missing?
View 5 Replies
ADVERTISEMENT
May 19, 2010
I had 5.4 machine. Upgraded to 5.5 today via yum upgrade. All went fine. Rebooted. Wanted to convert root partition to ext4 (I have three partitions: /boot, / and swap). All of them on software RAID 1 (root is /dev/md2). I did the following for converting
yum install e4fsprogs
tune2fs -O extents,uninit_bg,dir_index /dev/md2
nano /etc/fstab # I indicated here that my /dev/md2 is of ext4
[code]....
View 4 Replies
View Related
Nov 23, 2010
I think I found a bug with the maverick installer. [URL]. The installer is incorrectly reading my partition table I'm afraid it might overwrite data. /dev/sda3 is the target for the install.
/dev/sda1 = 200M = Windows system partition
/dev/sda2 = 239G = Windows install
/dev/sda3 = 50G = Where I want to install Linux
/dev/sda4 = 45G = NTFS storage
At first I had /dev/sda3 as a RAW type. In fact the only way I could create ext4 is via mkfs. I did unmount them before proceeding - mounted just as a reference in the screenshot. fdisk reads the same thing. Fresh install from LiveCD. I only have Wipe entire disk or Advanced in the installer. I don't have the "Install along side another OS" option.
View 9 Replies
View Related
Dec 12, 2010
I recently upgraded to a bigger hard disk. I used CloneZilla to copy my 150GB ext3 /home partition on my Ubuntu system to a shiny new 800GB ext3 /home partition. However, I've filled it up to almost 150GB, and I keep getting warnings that I have only 300MB available. It looks like the free space is being reported incorrectly. GParted recognizes the size of the partition as 800GB, and Nautilus reports the same when I boot from a live CD. I've tried using tune2fs to remove the reserved blocks and e2fsck -f to fix any errors, but nothing's changed.
View 4 Replies
View Related
May 23, 2011
I have installed HP g6 notebook from live-cd with 10.04 LTS across multiple partitions, only to find that the partition table is not setup correctly. I place the following mount points on separate partitions:
[Code]...
View 3 Replies
View Related
Dec 11, 2009
I usually repartition a disk by backing up, deleting the partitions, formatting them and repartition. I just did a 200 gig backup (so i am safe) and i want to join 2 (ext3) partition together, sdb1 (data4) and sdb5 (data5) into one big partition. Is there a way to do it without scraping the data in sdb5 (data5). It would save me from rewriting the data back to that new partition (200 gig is time consuming).
View 1 Replies
View Related
Nov 25, 2010
I was having trouble with an old lvm partition so I pulled all the data off and now want to re-partition it as an ordinary ext3 partition.
But gparted offers only Logical Partition for that partition. How do I convert that partition to a Primary or Extended partition - and which do I want?
View 1 Replies
View Related
Jul 18, 2011
I just installed ubuntu via the windows executable and I couldn't mount my NTFS partition. I found this a little odd and I checked fdisk and it seems to think I don't have an ext4 partition as my entire internal HD is displayed as NTFS.
Here's the fdisk output:
When i try to mount the NTFS partition /dev/sda2 i get the following output:
I can't make heads or tails out of this. Anyone know what's going on here?
Windows recognizes that 30GB were taken from the NTFS partition for my linux install. It reads the max partition size as 465GB. fstab reports the NTFS partition size as 488GB.
View 2 Replies
View Related
Mar 26, 2010
I created primary partition for Ubuntu. And for some reason that partition starts showing up in Windows XP as RAW. The partition should NOT be visible. In explorer. I tried with Ext4, Ext2 same thing, ext partitions should not be visible in windows.
View 9 Replies
View Related
May 9, 2010
I've used ext2ifs drivers to mount my ext3 partition in winxp, but I don't have write acces, it's mounted in a read-only mode, and i didn't check the rad-only box during the installation of the drivers. [URL] It's a straithfoward proces so I dont understand what I did wrong. I'm using fresh xp install with (more or less) all the updates and ubuntu 10.04 Also the partition is mounted at /home, so I dont know if that makes any difference.
View 1 Replies
View Related
May 26, 2010
because what i was looking for was complicated, i am going to edit post
I have laptop with ubuntu on it. I have one ext3 partition with ~220GB.
I want to delete ubuntu and create two ntfs partitions (50+170GB) so i can install windows 7 later.
how to do that using GParted Live CD?
View 6 Replies
View Related
May 27, 2010
Dual booting Ubuntu and XP, I've been using ext2fsd for a long time.Recently I did a fresh install of Lucid. Now when I try to run ext2fsd from XP, it tells me that my ext3 partition needs to be formatted.I vaguely recall having had and solved this problem in the past, but I just can't find the solution.
View 8 Replies
View Related
Aug 23, 2010
after several fresh format ext3/ext4/ntfs of the 200GB usb Hard, and even using gparted to delete the partition tables, and
Code:
dd if=/dev/zero of=/dev/sdc
creating a new ext3/ext4 partition leave 3 to 9 GB of used disk space. but ntfs leaves only
[code]....
View 4 Replies
View Related
Jun 29, 2011
I am currently using ubuntu 10.04,I want to access ext3 or any partition supported on linux in windows 7. Is there any way,i want to use partition as any other drive in windows.
View 5 Replies
View Related
Apr 25, 2009
I wanted to upgrade from Intrepid to Jaunty. I opted for a format/reinstall as I figured upgrading usually sucks. To save my important data, I resized my partition (partition A), formatted the empty space with ext3 (now partition B), and moved the necessary files from partition A to partition B. Then I went through the install process and installed Jaunty on partition A, telling the installer to NOT format partition B. It gave a warning about the installer deleting system folders (var, usr, etc) but I figured it didn't apply. I was wrong.
So now partition B is "empty." I know it didn't format it, but I need to get those files off of there. I have created an image of partition B using ddrescue, but I don't know where to go from there. I tried using foremost, but it won't recover things like my virtual machines and completely nukes the original file structure I had. And I've tried mounting it (using sudo mount -t ext3 -o loop /home/user/recovery.img /mnt), but that doesn't seem to work. The mount command completes successfully, but nothing shows up in the folder I mounted it to.
View 1 Replies
View Related
Feb 9, 2010
I have windows 7 and fedora 12 installed into my laptop.I just want to access linux ext3 partition in windows 7 as we can access windows ntfs as well as fat partition in linux
View 9 Replies
View Related
Jan 20, 2010
I just made a new storage partition and formatted it as Ext3. Now, this particular partition is shown and can be read at the terminal "fdisk -l". However, unlike in my Mint 7 partition, it does not show in my Fedora 10.
Code: [jun@localhost ~]$ sudo fdisk -l
[sudo] password for jun:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc5e3f820
[Code]....
This partition can also shows be seen in gparted in Fedora. However, even in the "Places" tab, it does not show.
View 9 Replies
View Related
Jan 3, 2010
i want to know how can i recover deleted files in ext3 partition manually(not using any tools)?? probably using the 'grep' command. if someone know pls tell me...
(i have recoverd deleted files in an ext2 partition with debugfs and dump . but dumping doesnt work for ext3)
View 4 Replies
View Related
Apr 24, 2010
I had a 500gb hard drive that I wanted to use on my Ubuntu system as a media storage drive. The drive originally had two partitions on it,one was a Dell Recovery partition and the other was a Windows Vista partition. Using the Palimpsest Drive Utility that comes with Ubuntu, I deleted both partitions,created a Ext3 partition using 100% of the space and copied my data to the drive. After I finally got fstab to load the drive, I found another problem. First of all, when Grub loads, two options it offers are:
Windows Vista (loader) on sdc1
Windows Vista (loader) on sdc3
Aside from that, 100% of the drive is not being used by the Ext3 partition.It is showing 434.6gb available on the drive. Fdisk is not showing any other partitions on this drive, so A) why are the Windows loader options showing up under Grub and B) why do I not have 500gb available?Here is a copy of the output fdisk -l:
Code:
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes[code]....
View 5 Replies
View Related
Aug 3, 2010
how to create extended ext3 partition using GParted? Every time I select "New" for unallocated space I can only create primary partition. Other options (extended and logical) are always greyed out.
View 5 Replies
View Related
Feb 5, 2009
I have an 80 GB XFS / partition which is dying. Got some errors like this:
ata9: SError: { UnrecovData Dispar BadCRC Handshk }
It's not a problem to create another partition, I've got 2 500GB and 2 1TB disks, all EXT3. I've also 2 80 GB disks, 1 for / and 1 for /home. I will remove the 2 80 GB disks but I have a lot of stuff compiled myself. I use openSUSE 11.1. Is it possible to create a 80 GB EXT3 partition on each of the 500 GB hdd, 1 for / and 1 for /home and move the data to it? must it be done with the DD command or can I easily copy everything within a live-cd. The /boot and swap are already on one of the 500GB disks, and there is no bootrecord on the 80 GB disks.
View 9 Replies
View Related
Apr 15, 2010
I have a created an ext3 partition and when i tried to set is hidden flag, there seems no effect. how to set the hidden flag of an ext3 partition?
View 1 Replies
View Related
Dec 30, 2009
A HP Netserver LP2000r, with original SCSI controller and HP NetRaid-2M controller, 3x 36GB Ultra3 HDD in RAID5, Debian (sarge/etch), has crashed after 992 days without reboot. From all that I can see, a hardware failure, most likely with the memory. The HP Diagnostic tools cannot find any problem, but everytime I boot into Knoppix, I get between 2minutes and 2 hours of runtime, and then either a kernel oops or just a complete and sudden halt.
Well, the box has earned its money. However, there is some data on the drives that I need to recover (yes, I have beaten myself up properly about not backing up that data, don't even go there !). There are three partitions: sda1 is /, sda2 is swap and sda3 is a LVM volume with 3 logical volumes on it. As far as I can tell, the hardware defect must have been creeping in and has made a total mess of the inodes in all these partitions.
After booting into Knoppix, I can restore the volumes using pvscan, vgscan, lvscan, vgcfgrestore and vgchange. If I try and mount them: mayhem. So I try and check them, using fsck.ext3. All sorts of interesting nonsense, such as a completely empty inode 11 (the first inode) and then obviously from there on all else is pointless. I tried using debugfs, but the information on what to do with it is somewhat spurious.
P.S.: Tomorrow I will go and get myself a 16GB Flash Drive and then hopefully I will be able to dump the partitions one by one onto that drive and transfer the images onto a different computer for analysis and data recovery.
View 1 Replies
View Related
Nov 23, 2010
Today I add hard disk and tried to make partion tion as extended. but i could not format it as ext3. and I could not also access the drive
using fidsk /dev/sdb1. It rerurns error as: /dev/sdb1 unable to read .
View 6 Replies
View Related
Sep 14, 2009
I have a lv image = /dev/vg0/server01. I create a partition using fdisk /dev/vg0/server01. Now, i have a partition under lv image = /dev/vg0/server01p1. how do i format /dev/vg0/server01p1 to ext3, it seems that the system doesn't recognize the partition under /dev. the purpose of this is to fully restore filesystem on domU (xen).
View 4 Replies
View Related
Aug 19, 2010
I have a dual boot system and am trying to be able to access all partitions in both OSs. I've tried some windows software that are supposed to be able to read linux partitions, but without luck. Essentially, my linux OS (rhel) is represented as an LVM partition (within the logical volume is ext3). In windows (7), file viewing programs see the partition as "raw". Is there any software that can read LVM in windows?
View 1 Replies
View Related
Jan 9, 2010
I just wanted to post this in case it helps anyone else. I have all my personal files (photos, documents, etc.) saved on a separate ext3 partition (so I don't have to worry about them on new installs, etc.). When I tried to delete files, however, I always received the message: "Cannot move file to trash, do you want to delete immediately?".
After much searching and failed fix attempts (mostly unnecessary messing with fstab), I found this post, which is now archived (or I would have replied there):ttp://ubuntuforums.org/showthread.php?t=759544. And frediE's solution, with a couple tiny modifications, finally solved the problem! (So huge thanks to frediE! ). irst, I found my user id, which is 1000, by going to the System > Administration > Users and Groups menu, selecting my user name (e.g. jnewm), clicking "Properties", andselecting "Advanced".
Second, I created a folder on the root of my partition called ".Trash-1000". (I may have needed to use "gksu nautilus" from a terminal to create the folder, I don't recall.)Third and last, I navigated to the root of the partition in my terminal and ran: sudo chown -R jnewm:jnewm .Trash-1000. Followed by: sudo chmod -R jnewm .Trash-1000 (I doubt this second step was necessary, but I'm listing it just in case). (confirmed unnecessary)
View 4 Replies
View Related
Feb 19, 2010
I attach a picture of my future disk partitioning,as I thought it should be. As you can see, the first two partitions are 2 different windows installations. At the end of the disk, I have specified a partition as ext3 104855 MB (sda9) and swap 8192 MB (sda. What should the the mount point of sda9 be? Should I specify a partition for /, /boot, /home, /tmp, ...etc? Or it is ok to make mount point '/'?
View 5 Replies
View Related
Mar 13, 2010
Long story short, my Windows had a fatal crash the other day and since I couldn't find the installation disk, I burned the Ubuntu 9.10 disk image to a CD at a friend's place and installed it on one partition of the hard drive. The other partition contained tons of Windows programs and documents in an NTFS system. Ubuntu is cool and all, but when I finally found the Windows disk, I wanted to reinstall it for dual-booting, to use some programs that don't run well in Wine.
To keep some documents safe and not waste any CDs, I moved them over to the Ubuntu partition before installing Windows. As experienced ubuntuists know, the slightly clumsy Windows installer erases GRUB in the process, and it's recommended to install Windows first. So, now I ended up with a working Windows partition and an Ubuntu partition with all of the stored data, which I can access via guest status with the burned CD.
Here's the catch though - as a guest and without Linux properly installed I can't move anything I moved to the Linux partition from the Windows partition back anymore. All the folders have a little X on their top corner. I'd be glad to reinstall Ubuntu now, but I must know how to keep all that tranferred data safe. Can I keep it there during the reinstallation? Should I install Wubi on Windows and access the stuff through it?
View 3 Replies
View Related
Jul 13, 2010
Using a small hard drive (180 GB) dual booting windows XP for gaming and Ubuntu 9.10 for my other stuff during install I didnt know how much of each partition i would use, so i did 50-50 1 for ext3 and one for NTFSHowever after awhile it seems I have run out of space on my NTFS and have tons of unused space on my ext3.What I am wanting to do is shrink some of that ext3 down and give it it NTFS, I did a little searching and found a couple of old posts but I was a little sketchey on em. Simply looking for some personal Methods or Tools you have used and a starting point of how to use them.
View 5 Replies
View Related