after several fresh format ext3/ext4/ntfs of the 200GB usb Hard, and even using gparted to delete the partition tables, and
Code:
dd if=/dev/zero of=/dev/sdc
creating a new ext3/ext4 partition leave 3 to 9 GB of used disk space. but ntfs leaves only
[code]....
I usually repartition a disk by backing up, deleting the partitions, formatting them and repartition. I just did a 200 gig backup (so i am safe) and i want to join 2 (ext3) partition together, sdb1 (data4) and sdb5 (data5) into one big partition. Is there a way to do it without scraping the data in sdb5 (data5). It would save me from rewriting the data back to that new partition (200 gig is time consuming).
View 1 Replies View RelatedI was having trouble with an old lvm partition so I pulled all the data off and now want to re-partition it as an ordinary ext3 partition.
But gparted offers only Logical Partition for that partition. How do I convert that partition to a Primary or Extended partition - and which do I want?
I Inadvertently deleted a good partition while trying to clean up after a 10.10 update install failure that left grub broken and prevented me from using my working Linux partition. (installed 10.4 in a new partition) Used testdisk to restore the deleted partition which resulted in the entire partition table being wiped out.All partions are gone, win Xp, 2 Linux partitions, 2 Linux swap partitions.Testdisk deep search does see the partitions but will not recreate the table.
Is their anything I am doing wrong in Testdisk that it won't write the table?Nothing else has been written to the disk.I very carefully recorded the partition information - is their any way to manually enter?
I just bought a new hard drive so that I could convert my XP-only machine into an XP-Ubuntu-Windows 7 triple boot machine.Since the drive is absurdly huge (1 TB) I wouldn't mind throwing ReactOS into the mixtoo.I just found out that master boot records are limited to 4 entries, meaning 4 primary partitions. I had Windows XP set up on my old drive as a boot partition, a program files partition and a media partition. Since I really didn't want to install XP from scratch, I cloned this setup on my new drive.
This leaves me one MBR partition entry for installing Windows 7, Ubuntu and ReactOS. I'd like to avoid having to install XP from scratch like the plague, partly because it's supposed to be a safety net in case things go wrong with my other OS's and because I've invested a lot of time getting it set up exactly the way I like it.Here are the options I've considered and why I don't like them:Install Windows 7 on my media partition. This would work, but I prefer to keep my media partition completely separate from any OS, so that I can reformat an OS partition without affecting my media partition at all.
Use wubi or something to install Ubuntu in the same partition as something else. Again, this is brittle.Move all my media to a logical drive on an extended partition. Create another logical drive on this extended partition for Ubuntu. The problem here is that extended partitions are rather brittle--if you nuke one, it renders the rest useless.Just put the old drive back in my computer and run XP off it. Use the new one for the other OS's. The problem here is that the old drive is slower and uses extra power, generates extra heat, etc.
I created primary partition for Ubuntu. And for some reason that partition starts showing up in Windows XP as RAW. The partition should NOT be visible. In explorer. I tried with Ext4, Ext2 same thing, ext partitions should not be visible in windows.
View 9 Replies View RelatedI've used ext2ifs drivers to mount my ext3 partition in winxp, but I don't have write acces, it's mounted in a read-only mode, and i didn't check the rad-only box during the installation of the drivers. [URL] It's a straithfoward proces so I dont understand what I did wrong. I'm using fresh xp install with (more or less) all the updates and ubuntu 10.04 Also the partition is mounted at /home, so I dont know if that makes any difference.
View 1 Replies View Relatedbecause what i was looking for was complicated, i am going to edit post
I have laptop with ubuntu on it. I have one ext3 partition with ~220GB.
I want to delete ubuntu and create two ntfs partitions (50+170GB) so i can install windows 7 later.
how to do that using GParted Live CD?
Dual booting Ubuntu and XP, I've been using ext2fsd for a long time.Recently I did a fresh install of Lucid. Now when I try to run ext2fsd from XP, it tells me that my ext3 partition needs to be formatted.I vaguely recall having had and solved this problem in the past, but I just can't find the solution.
View 8 Replies View RelatedI am currently using ubuntu 10.04,I want to access ext3 or any partition supported on linux in windows 7. Is there any way,i want to use partition as any other drive in windows.
View 5 Replies View RelatedI have a very strange issue. I have a desktop Ubuntu 10.04 system that has worked just fine for months. Now suddenly grub won't find the root partition which is an ext3 partition (/dev/sda2).The strange thing about this -- I can boot with the install CD and can mount it just fine when using mount -t ext3. If I don't supply the "ext3" type however it identifies the type as "silicon_medley_raid_member" and can't mount it. If I go into the Ubuntu 10.04 Admin>Disk Utilty -- it too identifies the type of the partition as "silicon_medley_raid_member" not ext3. Same with blkid -p. With that I get:
/dev/sda2: VERSION="42758.8269" TYPE="silicon_medley_raid_member" USAGE="raid"I have other ext3 partitions that are recognized OK. When I mount the strange partition forcing ext3 -- it too seems ok. I ran fsck.ext3 on it -- with -f - and no errors were found. I backed up the partition with tar -- again -- no errors archiving. I've even tried zeroing the first 1024 bytes of the partition -- that had no effect on this issue.So what is going on with this. Any ideas? Any ideas how to fix this issue? What am I missing?
I wanted to upgrade from Intrepid to Jaunty. I opted for a format/reinstall as I figured upgrading usually sucks. To save my important data, I resized my partition (partition A), formatted the empty space with ext3 (now partition B), and moved the necessary files from partition A to partition B. Then I went through the install process and installed Jaunty on partition A, telling the installer to NOT format partition B. It gave a warning about the installer deleting system folders (var, usr, etc) but I figured it didn't apply. I was wrong.
So now partition B is "empty." I know it didn't format it, but I need to get those files off of there. I have created an image of partition B using ddrescue, but I don't know where to go from there. I tried using foremost, but it won't recover things like my virtual machines and completely nukes the original file structure I had. And I've tried mounting it (using sudo mount -t ext3 -o loop /home/user/recovery.img /mnt), but that doesn't seem to work. The mount command completes successfully, but nothing shows up in the folder I mounted it to.
i was using 10.10 and this disaster occured when i tried to install 11.04 replacing 10.10. i have a separate home partition, while installing 11.04 i chose one weird option called "encrypt home partition"i didnt chose to format the home partition but once the installation is over, i have all my data lost in home directory.Is ther any chance that i could get the 165 gb junk data or atleast some 200 mb of important data
View 1 Replies View RelatedI have windows 7 and fedora 12 installed into my laptop.I just want to access linux ext3 partition in windows 7 as we can access windows ntfs as well as fat partition in linux
View 9 Replies View RelatedI just made a new storage partition and formatted it as Ext3. Now, this particular partition is shown and can be read at the terminal "fdisk -l". However, unlike in my Mint 7 partition, it does not show in my Fedora 10.
Code: [jun@localhost ~]$ sudo fdisk -l
[sudo] password for jun:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc5e3f820
[Code]....
This partition can also shows be seen in gparted in Fedora. However, even in the "Places" tab, it does not show.
i want to know how can i recover deleted files in ext3 partition manually(not using any tools)?? probably using the 'grep' command. if someone know pls tell me...
(i have recoverd deleted files in an ext2 partition with debugfs and dump . but dumping doesnt work for ext3)
I had a 500gb hard drive that I wanted to use on my Ubuntu system as a media storage drive. The drive originally had two partitions on it,one was a Dell Recovery partition and the other was a Windows Vista partition. Using the Palimpsest Drive Utility that comes with Ubuntu, I deleted both partitions,created a Ext3 partition using 100% of the space and copied my data to the drive. After I finally got fstab to load the drive, I found another problem. First of all, when Grub loads, two options it offers are:
Windows Vista (loader) on sdc1
Windows Vista (loader) on sdc3
Aside from that, 100% of the drive is not being used by the Ext3 partition.It is showing 434.6gb available on the drive. Fdisk is not showing any other partitions on this drive, so A) why are the Windows loader options showing up under Grub and B) why do I not have 500gb available?Here is a copy of the output fdisk -l:
Code:
Disk /dev/sda: 80.0 GB, 80000000000 bytes
255 heads, 63 sectors/track, 9726 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes[code]....
how to create extended ext3 partition using GParted? Every time I select "New" for unallocated space I can only create primary partition. Other options (extended and logical) are always greyed out.
View 5 Replies View RelatedI have an 80 GB XFS / partition which is dying. Got some errors like this:
ata9: SError: { UnrecovData Dispar BadCRC Handshk }
It's not a problem to create another partition, I've got 2 500GB and 2 1TB disks, all EXT3. I've also 2 80 GB disks, 1 for / and 1 for /home. I will remove the 2 80 GB disks but I have a lot of stuff compiled myself. I use openSUSE 11.1. Is it possible to create a 80 GB EXT3 partition on each of the 500 GB hdd, 1 for / and 1 for /home and move the data to it? must it be done with the DD command or can I easily copy everything within a live-cd. The /boot and swap are already on one of the 500GB disks, and there is no bootrecord on the 80 GB disks.
I have a created an ext3 partition and when i tried to set is hidden flag, there seems no effect. how to set the hidden flag of an ext3 partition?
View 1 Replies View RelatedA HP Netserver LP2000r, with original SCSI controller and HP NetRaid-2M controller, 3x 36GB Ultra3 HDD in RAID5, Debian (sarge/etch), has crashed after 992 days without reboot. From all that I can see, a hardware failure, most likely with the memory. The HP Diagnostic tools cannot find any problem, but everytime I boot into Knoppix, I get between 2minutes and 2 hours of runtime, and then either a kernel oops or just a complete and sudden halt.
Well, the box has earned its money. However, there is some data on the drives that I need to recover (yes, I have beaten myself up properly about not backing up that data, don't even go there !). There are three partitions: sda1 is /, sda2 is swap and sda3 is a LVM volume with 3 logical volumes on it. As far as I can tell, the hardware defect must have been creeping in and has made a total mess of the inodes in all these partitions.
After booting into Knoppix, I can restore the volumes using pvscan, vgscan, lvscan, vgcfgrestore and vgchange. If I try and mount them: mayhem. So I try and check them, using fsck.ext3. All sorts of interesting nonsense, such as a completely empty inode 11 (the first inode) and then obviously from there on all else is pointless. I tried using debugfs, but the information on what to do with it is somewhat spurious.
P.S.: Tomorrow I will go and get myself a 16GB Flash Drive and then hopefully I will be able to dump the partitions one by one onto that drive and transfer the images onto a different computer for analysis and data recovery.
Today I add hard disk and tried to make partion tion as extended. but i could not format it as ext3. and I could not also access the drive
using fidsk /dev/sdb1. It rerurns error as: /dev/sdb1 unable to read .
I have a lv image = /dev/vg0/server01. I create a partition using fdisk /dev/vg0/server01. Now, i have a partition under lv image = /dev/vg0/server01p1. how do i format /dev/vg0/server01p1 to ext3, it seems that the system doesn't recognize the partition under /dev. the purpose of this is to fully restore filesystem on domU (xen).
View 4 Replies View RelatedI have a dual boot system and am trying to be able to access all partitions in both OSs. I've tried some windows software that are supposed to be able to read linux partitions, but without luck. Essentially, my linux OS (rhel) is represented as an LVM partition (within the logical volume is ext3). In windows (7), file viewing programs see the partition as "raw". Is there any software that can read LVM in windows?
View 1 Replies View RelatedI just wanted to post this in case it helps anyone else. I have all my personal files (photos, documents, etc.) saved on a separate ext3 partition (so I don't have to worry about them on new installs, etc.). When I tried to delete files, however, I always received the message: "Cannot move file to trash, do you want to delete immediately?".
After much searching and failed fix attempts (mostly unnecessary messing with fstab), I found this post, which is now archived (or I would have replied there):ttp://ubuntuforums.org/showthread.php?t=759544. And frediE's solution, with a couple tiny modifications, finally solved the problem! (So huge thanks to frediE! ). irst, I found my user id, which is 1000, by going to the System > Administration > Users and Groups menu, selecting my user name (e.g. jnewm), clicking "Properties", andselecting "Advanced".
Second, I created a folder on the root of my partition called ".Trash-1000". (I may have needed to use "gksu nautilus" from a terminal to create the folder, I don't recall.)Third and last, I navigated to the root of the partition in my terminal and ran: sudo chown -R jnewm:jnewm .Trash-1000. Followed by: sudo chmod -R jnewm .Trash-1000 (I doubt this second step was necessary, but I'm listing it just in case). (confirmed unnecessary)
I attach a picture of my future disk partitioning,as I thought it should be. As you can see, the first two partitions are 2 different windows installations. At the end of the disk, I have specified a partition as ext3 104855 MB (sda9) and swap 8192 MB (sda. What should the the mount point of sda9 be? Should I specify a partition for /, /boot, /home, /tmp, ...etc? Or it is ok to make mount point '/'?
View 5 Replies View RelatedLong story short, my Windows had a fatal crash the other day and since I couldn't find the installation disk, I burned the Ubuntu 9.10 disk image to a CD at a friend's place and installed it on one partition of the hard drive. The other partition contained tons of Windows programs and documents in an NTFS system. Ubuntu is cool and all, but when I finally found the Windows disk, I wanted to reinstall it for dual-booting, to use some programs that don't run well in Wine.
To keep some documents safe and not waste any CDs, I moved them over to the Ubuntu partition before installing Windows. As experienced ubuntuists know, the slightly clumsy Windows installer erases GRUB in the process, and it's recommended to install Windows first. So, now I ended up with a working Windows partition and an Ubuntu partition with all of the stored data, which I can access via guest status with the burned CD.
Here's the catch though - as a guest and without Linux properly installed I can't move anything I moved to the Linux partition from the Windows partition back anymore. All the folders have a little X on their top corner. I'd be glad to reinstall Ubuntu now, but I must know how to keep all that tranferred data safe. Can I keep it there during the reinstallation? Should I install Wubi on Windows and access the stuff through it?
Using a small hard drive (180 GB) dual booting windows XP for gaming and Ubuntu 9.10 for my other stuff during install I didnt know how much of each partition i would use, so i did 50-50 1 for ext3 and one for NTFSHowever after awhile it seems I have run out of space on my NTFS and have tons of unused space on my ext3.What I am wanting to do is shrink some of that ext3 down and give it it NTFS, I did a little searching and found a couple of old posts but I was a little sketchey on em. Simply looking for some personal Methods or Tools you have used and a starting point of how to use them.
View 5 Replies View RelatedI have a flash drive that I use to sync my work- and home-computers. Rsync has occasional issues syncing between FAT32 (which I use on my flash drive b/c it's universal) and EXT3.
I decided to create an EXT3 partition on the flash drive in an attempt to alleviate the rsync woes. My problem is that when I create the partition using GParted, Ubuntu auto-mounts it with Root as the owner. I had GParted check the drive, and it found no errors to repair.
One other weird thing is that the EXT3 partition shows 84.7MB being used immediately after creating the new partition.
The FAT32 partition mounts fine, is read/write, and only shows 4KB used after the new partition scheme.
I tried doing new partitions a number of times, with EXT2, EXT3, and EXT4 just to see if that mysteriously made a difference. Each time that partition would mount w/ Root as owner.
I am facing a serious problem.I installed UBUNTU 10.04 and encrypted it during installation. I accidentally erased some of the necessary files from root folder. now the the OS is NOT booting.luckily i still have the encryption key i have some important documents in that drive (desktop folder).
PS: I have tried to run Live Ubuntu it shows the Root, but it does not enter any of the folder.
