Ubuntu :: Evolution In A Loop Sending The Same Email / Fix This?
Feb 19, 2010
Basically, I think my Internet crashed while sending an email via Evolution and now whenever I open Evolution, or try and receive any new email it just sits there sending this email - it reaches 100% so I can only assume it has actually sent the email.
There's a button to "Cancel the current mail operation" though it doesn't appear to be doing anything; the email is still being "sent" each time.
This would be pretty tedious for the guy I sent the email to.
I am working happily with Fedora 8, evolution chatting happily to exchange 2003, calendar sync the works...impressed. This continued through Fedora 9 (though a little bumpy as all odd numbered Fedora releases are). On to Fedora 10, yes works a treat out of the box (DVD). A couple of updates to evolution later, through yumex (fedora updates), and evolution has stopped sending email to the exchange server. It's also touch and go whether I can read email using OWA.
On pressing 'Send/Receive' evolution pops the error, Error while performing operation. Exchange transport can only be used with Exchange mail source. How could I back out these evolution updates?
Having one issue with evolution not showing html websites showing up in email like verizon sending a promo. I have gone to edit, preferences, mail preferences, html messages and have always load images from the internet chosen. I have also added sender to contacts. Even if I right click message and tell it to dload images it doesn't.
I'm attempting to send email with a PHP application I got from a textbook. Do I need to start an email server in order to get the application to work?Using SuSE 11.2
I'm attempting to send email used a textbook PHP application. The application fails to send an email.Do I need to setup an email server to get the ap to work?Right now, I'm getting email through Kontact via my web host, Yahoo mail and Google mail.
I use 'quoted' style for reply emails. I want to be able to intersperse my replies within a quoted reply i.e. if the email had three paragraphs, I'd like to be able to have my replies between each of the paragraphs. At the moment, I don't seem to be able to do anything other than delete from the quoted section - I try to simulate my requirements by cutting and then 'paste quotation', but this doesn't always work as sometimes Evolution adds too many levels of '> ' .
I had configured the evolution to send/recive email. After it had been configured, it could receive emails. Suddendly it can't fetch email anymore. In the inbox of evolution, there were about 200 emails. There are maybe 5K emails in the server, I guessed. I'm not sure whether it's the problem that there's one email in the server too big, so the evolution can not fetch it. The error of evolution is: error while fetching email. Evolution version: Evolution 2.28.0. OS version: Linux xxx2.6.32.9-70.fc12.i686.PAE #1 SMP Wed Mar 3 04:57:21 UTC 2010 i686 i686 i386 GNU/Linux I'm sure my network is fine, I use pop3 to receive email.
nslookup result: $ nslookup pop3.163.com Server:221.6.96.178 Address:221.6.96.178#53 Non-authoritative answer: pop3.163.comcanonical name = pop.163.com. pop.163.comcanonical name = pop3.163.idns.yeah.net. Name:pop3.163.idns.yeah.net Address: 123.125.50.29
From 2/3 days my evolution mail client is not working properly when i'm trying to send mail from it. In case mail receiving it has no problem but the problem is occurring when i'm trying to send mails with following error..Error: Welcome response error: Server busy, too many connectionsI'm using: Ubuntu 9.10, Evolution 2.28.1
How can I send an email from localhost via the terminal? I don't need pop just smtp. I believe this can be done with postfix which I have just installed but what is the command to input via the terminal, on my centos box I use the following to send the contents of some files which works just fine but what about sending through postfix on ubuntu?
Code:
sudo tail -50 /home/user/.bash_history | mail -s "bash history" email@mail.com
Just upgraded to 10.10, evolution worked the first time but has not worked since. Have tried re installation but no joy. Starting for terminal shows:- (evolution:16876): Unique-DBus-WARNING **: Error while sending message: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken. It was working in 10.04.
how to hide an ip address while sending through evolution mail so the recipient cannot see the ip in the email header?
example below: I sent an email from evolution to my gmail account and I can see my real ip address in the mail header 80.x.x.x
Authentication-Results: mx.google.com; spf=neutral (google.com: is neither permitted nor denied by best guess record for domain of email@email.com) smtp.mail=email@email.com Received: from([80.x.x.x] helo=[192.168.1.6])
I can hide my ip using a proxy but what are the other ways of doing this?
I have designed and one form and php code to send mail. I am developing this in my localhost, So now i want to send email from my localhost to test my programming. I googled and i find something like editing "php.ini" file. But it didnt work for me.
Had anyone tried downloading a free SMTP server from the web and use it to send emails in nagios, when the services are down, an email notification will be sent.Right now i need a smtp server in order for me to send email notifications, are there any recommended ones?
I just setup a mail server on my web server and I cannot for the life of me figure out how to send emails to external (as in outside my LAN) emails or receive from external emails. I'm using Postfix with Dovecot and Squirrelmail. I get this delivery report in Squirrelmail when trying to send an email to my hotmail address.
Final-Recipient: rfc822; example@hotmail.com Action: failed Status: 5.0.0 Remote-MTA: dns; mx3.hotmail.com Diagnostic-Code: smtp; 550 DY-001 Mail rejected by Windows Live Hotmail for policy reasons. We generally do not accept email from dynamic IP's as they are not typically used to deliver unauthenticated SMTP e-mail to an Internet mail server. [URL] maintains lists of dynamic and residential IP addresses. If you are not an email/network admin please contact your E-mail/Internet Service Provider for help. Email/network admins, please visit [URL] for email delivery information and support.
I'm trying to send an email using mailx, in a bash script, but I can't get it to work. In the terminal I can, and this is how I do it:
Code: $ mailx johndoe@gmail.com Message^D
Within seconds of doing this, I get sent an email. The problem is with the bash script I'm trying to make. Among other things, I tried this:
Code: #!/bin/bash mailx johndoe@gmail.com < "Message" I honestly don't know what I'm supposed to do, and I've Googled a bunch of things too, and didn't have too much luck. Is there anyone who could help me out?
Edit: Figured it out. This is what I did, and it works for me:
Code: #!/bin/bash echo "Message" | mail -s "Subject" "johndoe@gmail.com"
i've got Evolution as an email client in Fedora 12.ve got only one IMAP account configured, which seems to be working OK. However, temporarily it is not sending emails. I write an email and hit send/receive and get error. "Error while sending message" ir seems that it is downloading messages, but not sending. There is a quick, but annoying solution to it: restart Evolution. As soon as it is restarted (close and ope the application) it is working OK for some time.
How is it possible to send email using the "mail" program? I tried: echo "testing" | mail -s "test" myaddress@gmail.com But nothing happened. I made sure that the sendmail daemon was running before I tried. Is there anything else that I have to set up first?
Sent an email by using telnet on port 25 from the terminal. Telnet states my message was sent but I never got it. Is it on the hard disk somewhere. Is there a log file? Where did my email go? Did it go into the ehter? I opened port 25 on my firewall through gnome by selecting 25/smpt checkbox as a trusted service.
We use mutt to send out emails.mutt -s "Test" -e "Content-Type: text/html" test@example.com < message.htmlWe send out our email updates in HTML format. We would like to send emails as multi-part containing both a text version and an html version. How do we create such a multipart message in Linux when the email subject, and HTML and text versions of the email body are given?Can we use mutt to send the multipart email created in step 1, from the linux prompt?
here is a fragment of a bash that i have to send an email when a back Up is made. basically a usr runs the sh - it asks for the job num and I read that from standard in . I do a tar of the drv to tape and I wish to send an email that job such and such has happened. My problem is : the subject of the email. I can set it - but if i try to use a var ( as in the $jobNum ) that Does work in the mail body - the subject comes out blank. I have also tried to buld a text file and shove that in the SUBJECT. my Q is how can I use a var in the subject.
# email subject ### so I have tried bulding and reading a tmp file -no works EMAILSUBJECT="/tmp/emailsubject.txt" echo "backup job" $jobNum >$EMAILSUBJECT
I'm using Linux 11.04 and just installed the most recent version of Postfix. I'm trying to send a simple email (through a relay) but when I run the command
sendmail davea@mydomain.com FROM: fromemail@gmail.com SUBJECT: hello world this is a test email .
It just hangs there. There is nothing in /var/log/mail.log or in any of its accompanying files.
I cannot send an email link in Namoroka. I go to file-send link and nothing happens. I tried to find the problem by about:config in Namoroka. I just found /usr/bin/mozilla-thunderbird. With my limited knowledge I do not know what else to look for.
I have sendmail setup and it works fine sending emails to outside email addresses. When I try and send email to our internal groupwise server the mail never gets there and I get an error message in the log user unknown.
i have a problem regarding our email server. all the users can send email but they cant received mail. .when hitting send receive on outlook there were no error found. .i have already reboot the server and restarted the sendmail services but still same problem.
How to configure my home linux server, as an email server, and be able to send email to hotmail, please?. I have done this before, but I never managed to do it so hotmail accept emails coming from my linux server.
So I have Postfix working great and I've always used webmail if I needed to send email from PC's outside of $mynetworks. So fast forward to today where I got my 1st Android powered mobile phone and I can configure the Android mail client to send/receive IMAP email but my question is do I need to become an open relay to allow my random wireless providers dynamic range of IP's to send mail via Postfix? Seems extremely vulnerable and scary to think I would have to allow my providers IP range to relay mail via my MTA. I started reading a bit and I think I need SASL authentication and since both Postfix 2.8.1 & Dovecot 2.0.11 are both configured / using TLS, is there anything else I would need or you recommend for sending email from my Android powered mobile?
