How is it possible to send email using the "mail" program? I tried:
echo "testing" | mail -s "test" myaddress@gmail.com
But nothing happened. I made sure that the sendmail daemon was running before I tried. Is there anything else that I have to set up first?
I just setup a mail server on my web server and I cannot for the life of me figure out how to send emails to external (as in outside my LAN) emails or receive from external emails. I'm using Postfix with Dovecot and Squirrelmail. I get this delivery report in Squirrelmail when trying to send an email to my hotmail address.
Final-Recipient: rfc822; example@hotmail.com
Action: failed
Status: 5.0.0
Remote-MTA: dns; mx3.hotmail.com
Diagnostic-Code: smtp; 550 DY-001 Mail rejected by Windows Live Hotmail for policy reasons. We generally do not accept email from dynamic IP's as they are not typically used to deliver unauthenticated SMTP e-mail to an Internet mail server. [URL] maintains lists of dynamic and residential IP addresses. If you are not an email/network admin please contact your E-mail/Internet Service Provider for help. Email/network admins, please visit [URL] for email delivery information and support.
Can anyone tell me what the pros and cons are between heirloom-mailx vs mailutils? This is for ubuntu 10.04 LTS. AT this point my only purpose is to use the mail command line program to occasionally send log output to email aliases.
View 2 Replies View RelatedI'm attempting to send email with a PHP application I got from a textbook. Do I need to start an email server in order to get the application to work?Using SuSE 11.2
View 5 Replies View RelatedI'm attempting to send email used a textbook PHP application. The application fails to send an email.Do I need to setup an email server to get the ap to work?Right now, I'm getting email through Kontact via my web host, Yahoo mail and Google mail.
View 2 Replies View RelatedI've been trying to get PHP to send an email using PEAR's mime mail and have been unable to get it working.
View 3 Replies View RelatedSent an email by using telnet on port 25 from the terminal. Telnet states my message was sent but I never got it. Is it on the hard disk somewhere. Is there a log file? Where did my email go? Did it go into the ehter? I opened port 25 on my firewall through gnome by selecting 25/smpt checkbox as a trusted service.
View 8 Replies View RelatedHow to configure my home linux server, as an email server, and be able to send email to hotmail, please?. I have done this before, but I never managed to do it so hotmail accept emails coming from my linux server.
View 5 Replies View RelatedI am working happily with Fedora 8, evolution chatting happily to exchange 2003, calendar sync the works...impressed. This continued through Fedora 9 (though a little bumpy as all odd numbered Fedora releases are). On to Fedora 10, yes works a treat out of the box (DVD). A couple of updates to evolution later, through yumex (fedora updates), and evolution has stopped sending email to the exchange server. It's also touch and go whether I can read email using OWA.
On pressing 'Send/Receive' evolution pops the error,
Error while performing operation.
Exchange transport can only be used with Exchange mail source.
How could I back out these evolution updates?
l to a group in Linux? for example, I want to send a notification mail to 20 people and I want to create a group of these 20 people and want to send them the notification
View 5 Replies View RelatedI am facing a problem while configuring a sendmail AS MY MTA.My problem is when is try to send mail from root to local user account(Any user existing in my local machine) , i m getting a unknown user error but normal users can successfully send a mail to root but root account does not.I can successfully compile a sendmail.mc without any error and sendmail deamons start successfully.When I Try to send mail from root account to local user Account , i got a Returned mail:see transcript for detail (which Has A following Detail )
View 5 Replies View Relatedin Lucid ive been trying to get the mail applet to light up green by sending myself mail. Does this applet only light up when IMs r received or does this also work with evolution and if so what might i have done wrong in evolution, ive tried it with evolution open and evolution closed.
View 8 Replies View Relatedi have configured mail server with postfix with dovecot with no encryption:When connecting with Thunderbird imap is working fine. when sending email from another domain to this domain again it is fine. but when i want to send mail frommy domain to another it gives me error and this is /var/log/maillog:
Code:
Jan 18 18:23:09 srv1 postfix/smtpd[3991]: NOQUEUE: reject: RCPT from unknown[95.81.67.120]: 554 5.7.1 <Recipient email>: Relay access denied; from=<Sender> to=<Recipient email> proto=ESMTP helo=<[127.0.0.1]>
[code]....
this is my code at the moment
PHP Code: <?php
if (isset($_REQUEST['email'])) && $_REQUEST['email']!='0'{
$to = "chrisathisemail";
[code]....
I have two servers relavant here: mail.domain.com (1.1.1.1) - which is the nameserver and the mail server for domain.com. www.domain.com (2.2.2.2) - which is the www subdomain for domain.com domain.com (cname www.domain.com) - an alias for www.
The zone file for domain.com lists mail.domain.com as the MX server for domain.com. 2.2.2.2 is actually being served web pages as a virtual host. It's real hostname is www.anotherdomain.com. Mail for domain.com works pretty well, in general. However, if I attempt to send mail from www.domain.com (or its alias domain.com), I get "mail for domain.com loops back to myself" in the postfix logs. On 2.2.2.2 /etc/postfix/mail.cf has mydestination = www.anotherdomain.com, localhost. How do I tell postfix on 2.2.2.2 that mail for domain.com needs to be delivered to mail.domain.com?
Having one issue with evolution not showing html websites showing up in email like verizon sending a promo. I have gone to edit, preferences, mail preferences, html messages and have always load images from the internet chosen. I have also added sender to contacts. Even if I right click message and tell it to dload images it doesn't.
View 1 Replies View RelatedI haven't logged on to Fedora for a few days, but I did this morning and opened claws mail and clicked 'get mail' and it proceeded to download new messages. However, when I clicked on the inbox folder, the email count changed to zero! No email. I checked and found the folderlist.xml has the correct Mail folder location, and when I went to that location, (on a shared data partition) indeed the 'inbox' folder was EMPTY. No files at all. I'd had a similar issue once, but the email #MH location wasn't correct, so when I fixed it, the email appeared. I did a web search and a search of the claws bugzilla.
The closest I came was a message about the cache not keeping accurate information. There was a claws-mail update at the end of May, but it had been working fine since then up until now. And, it's possible it's some sort of Fedora issue (?), because I had opened my 'home' folder on my desktop to check the claws folder, and now I see that there's a gaping hole on my desktop where that folder should be. I can get there by clicking 'places' and 'Home Folder'. Any other reports of disappearing folders and email?
I have designed and one form and php code to send mail. I am developing this in my localhost, So now i want to send email from my localhost to test my programming. I googled and i find something like editing "php.ini" file. But it didnt work for me.
View 9 Replies View RelatedHad anyone tried downloading a free SMTP server from the web and use it to send emails in nagios, when the services are down, an email notification will be sent.Right now i need a smtp server in order for me to send email notifications, are there any recommended ones?
View 7 Replies View RelatedI need to send a fax to my doctor but I don't have a fax machine.
Is there a way to accomplish this using Slackware 13.37?
How to attach an ordinary file as well as Excel file while sending mail to a particular user in red hat.
View 1 Replies View RelatedWe use mutt to send out emails.mutt -s "Test" -e "Content-Type: text/html" test@example.com < message.htmlWe send out our email updates in HTML format. We would like to send emails as multi-part containing both a text version and an html version. How do we create such a multipart message in Linux when the email subject, and HTML and text versions of the email body are given?Can we use mutt to send the multipart email created in step 1, from the linux prompt?
View 1 Replies View RelatedBasically, I think my Internet crashed while sending an email via Evolution and now whenever I open Evolution, or try and receive any new email it just sits there sending this email - it reaches 100% so I can only assume it has actually sent the email.
There's a button to "Cancel the current mail operation" though it doesn't appear to be doing anything; the email is still being "sent" each time.
This would be pretty tedious for the guy I sent the email to.
Has anyone had similar issues and knows of a fix?
How can I send an email from localhost via the terminal? I don't need pop just smtp. I believe this can be done with postfix which I have just installed but what is the command to input via the terminal, on my centos box I use the following to send the contents of some files which works just fine but what about sending through postfix on ubuntu?
Code:
sudo tail -50 /home/user/.bash_history | mail -s "bash history" email@mail.com
here is a fragment of a bash that i have to send an email when a back Up is made. basically a usr runs the sh - it asks for the job num and I read that from standard in . I do a tar of the drv to tape and I wish to send an email that job such and such has happened. My problem is : the subject of the email. I can set it - but if i try to use a var ( as in the $jobNum ) that Does work in the mail body - the subject comes out blank. I have also tried to buld a text file and shove that in the SUBJECT. my Q is how can I use a var in the subject.
# email subject
### so I have tried bulding and reading a tmp file -no works
EMAILSUBJECT="/tmp/emailsubject.txt"
echo "backup job" $jobNum >$EMAILSUBJECT
[code]....
I'm using Linux 11.04 and just installed the most recent version of Postfix. I'm trying to send a simple email (through a relay) but when I run the command
sendmail davea@mydomain.com FROM: fromemail@gmail.com SUBJECT: hello world this is a test email .
It just hangs there. There is nothing in /var/log/mail.log or in any of its accompanying files.
How to set outgoing mail limit? And what is the default value?
View 2 Replies View RelatedI cannot send an email link in Namoroka. I go to file-send link and nothing happens. I tried to find the problem by about:config in Namoroka. I just found /usr/bin/mozilla-thunderbird. With my limited knowledge I do not know what else to look for.
View 14 Replies View RelatedI have sendmail setup and it works fine sending emails to outside email addresses. When I try and send email to our internal groupwise server the mail never gets there and I get an error message in the log user unknown.
View 1 Replies View Relatedi have a problem regarding our email server. all the users can send email but they cant received mail. .when hitting send receive on outlook there were no error found. .i have already reboot the server and restarted the sendmail services but still same problem.
View 1 Replies View Related
