I just popped in a CD for my friend filled with JPEG images to put online, and I get an error message for each picture. This is what pops up:
Code:
Could not load image 'P1070908.JPG'.
Error interpreting JPEG image file (Not a JPEG file: starts with 0x62 0x6f)
I have just exported 3 png files out of gimp for a html document I'm working on right now, and they are all almost the same, except I need each to load when the user does something. So the first image will display on the page, and when a user puts their cursor over it, then it will load image 2. When they press it, it loads image 3.
View 1 Replies View RelatedI have one error with a skin conky. When i execute a conky it display a error
Code:
rm: no se puede borrar �/home/said/.tonky/notify/oncal�: No existe el fichero o el directorio
rm: no se puede borrar �/home/said/.tonky/notify/oncpu�: No existe el fichero o el directorio
rm: no se puede borrar �/home/said/.tonky/notify/onmem�: No existe el fichero o el directorio
[code]....
I think, that error can be because i have a smaller display.
Is it possible to build an image on a cd that can allow me to load an image of an internet on the computer. without installing it. Like a dummy terminal.
View 7 Replies View RelatedI'm overall realitively new to Ubuntu 11.0.4 and I had some questions regarding this operating system. I just wanted to inform everyone, that I'm attempting to make a transition, from a life time Windows user and a current Windows 7 Ultimate user, to being a Ubuntu user.
I am becoming fedup with Windows 7, because i dislike how much system resources, it requires to run, and in addition I'm skeptical about Windows security. I had a lot of bad experiences with the Windows updates as well, so I was kind of alienated, as one can imagine. What I did like about Windows 7, is how easy it was, to configure the user group policies. I was wondering if you were able to do that in Ubuntu latest release.
I also was wondering, if it were possible, to create a hard drive image, that I can just load up, if I ever needed to reformat, like I did in Windows 7.
Situation: I have to install multiple SUSE linux installs onto blade servers without cdroms.
Goal: Create a bootable USB drive that contains multiple DVD Isos. Upon boot, a menu is displayed that allows the choice of several OS installs.
Problem: I just can't figure out how to format syslinux.cfg to load my specified iso image. Here is semi sudo code for what I want to do with my config:
sudo syslinux config
label <any label>
menu label install SLES 10 x86
kernel linux
append <path_to_iso=/sles10/dvd1_x86.iso> autoyast=10x86.xml
code....
Googling tells you quite a bit about syslinux.cfg, but it doesn't reallyt tell you how to load specific file for installation.
I was just wondering why my Dual-core Processor shows basically a mirror image where CPU core loads cross. On something like a file transfer, shouldn't they both be at the same level?
View 1 Replies View RelatedTrying to install iso disk image of vers 10.10. does not seem to want to load from boot. used alcohol 120 for burn,which is usually very reliable.But install seems to stall early into load.
View 4 Replies View RelatedI installed 1.3.3 + wbar dfsg2-1 it works almost correctly
I have a small problem on the second line of the file dot.wbar line is as follows
When I run the command "wbar - config dot.wbar" I get the message
With the parameter:
i cant load PNG image extensions..i dont know what to do.when i pressed the button printscreen of my keyboard the system shows me an error dialog:"Unable to save screenshot to disk:The type 'png' is not suported."what is the problem??i try to rebuild libpng and libjpeg, but i cant solve the problem.
View 3 Replies View RelatedCan anyone else confirm that Inkscape (from the FC15 distribution repo) is running as slow as a wet wig?
I have a fast machine (8 core 3.4ghz, 4GB RAM, 64bit FC15) everything else graphics wise is smooth and sexy but with inkscape try and zoom in with NO image loaded and it tic, tic, tic, jerky movements etc
Load an image and it is completely unusable, and has actually crashed my machine a couple of times when i was trying to work with a 5MB SVG file
I am trying to write a small gtk+-2 program to display whatever image it is given and I was wondering if anyone out there has done something similar. I am not too familiar with writing programs for gtk and its been a while since I've fiddled with C. I went over the tutorial for gtk and it seams pretty easy to get a window to display, but I do not see anything that refers to loading an image or displaying it in the window. I am wondering if this can be done purely with gtk or will I need to use some type of image library like imlib2?
View 3 Replies View RelatedI did a perl/cgi script for uploading image. The script works, image is iploaded in upload directory, but the problem is: How can I to load and show image in web page?
View 12 Replies View RelatedI'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"
View 4 Replies View RelatedAMD 64 I am have installed Testing core using Openbox and trying to keep everything as light as possible. Using Nitrogen to set wallpaper I get this...
ERR: Could not load "image-loading" from icon theme, this indicates a problem with your Gtk/Gtkmm install.
I've had a hell of a time with an extremely unpredictable recently built computer. I don't even know where to start with thetory, so I'll try to share some key facts.Running Fc12It is a Gigabyte GA-EP45T-UD3LR. Reviews on NewEgg havee complaints about instability and it's lack of claimed DDR3 support. I had to use setting described by another reviewer to underclock my memory to get it to work. It has since passed memtest many times.I've encountered mutliple occasions of a complete system freeze.
Booting after freeze seems to require a random amount of restarts to get it to come up. Sometimes I have to hit the reset button 30+ times until I can get the log in prompt to come up.Right now, I have one SATA HDD, in IDE compatibility mode in the system. dropped the FC12 Stable dvd in, the very DVD I installed the current system with, to install it again on another partition. I get to the same point every time, where it hangs:"trying to unpack rootfs image as initramfs"Googling that didn't help me much, since it mostly seemed to address people messing with their own kernel builds.
If I choose "boot from local drive" on the options list from the install DVD, it goes to "PRESS ANY KEY TO REBOOT" with a blinking underscore cursor. Where when I boot normally, it will either give me JUST the blinking underscore alone, or the FC loading screen with no progress. I suspect this motherboard is a pile of **** and needs to be RMA'ed, or simply returned. Anyone care to support or reject that hypothesis?
I have run into an issue with Fedora on my laptop that has me stumped. On this laptop I had partitioned the hard drive with Windows 7 (came with the PC), and initially Fedora 13. This setup worked fine for about four-five months, but recently Fedora will no longer boot. One day I attempted to load the OS and after GRUB get a screen that says "Error 28: Selected item cannot fit into memory." Windows continues to load fine however, and a memtest worked fine as well. When I attempted to run my Fedora 13 live-cd, I got the similar error "Error 28: Not enough memory to load this specified image."
Now, not having anything critical on the Unix partition, I decided to delete the Fedora partitions and start from scratch. I did so and the computer successfully loads a Fedora 14 live-cd albeit slowly (but still not the 13 one... I'm guessing the CD is just corrupted from scratches). Unfortunately, once I installed Fedora 14 on the empty space and tried running, I get my original error dealing with the item not fitting into memory. I'm out of ideas, and getting tired of the machine being Windows only.
The specs are as follows:
ASUS UL80VT Notebook
Intel U7300 1.3Ghz
4GB Ram
GRUB reports memory as:
607K lower / 14272 upper
Tried running simdock from software center...uninstalled because I was getting this error after trying to run ap "Can't load image from file '/usr/share/firefox/icons/mozicon128.png': file does not exist."
View 3 Replies View RelatedWhen playing dvd's, vob files and wmv files, the image comes with high contrast colors ,very intense red/green/blue. very dark too. I have vlc 1.1.4 installed, using ubuntu 10.10, libdvdcss2 installed. for the rest of the video formats it seems to work fine. any ideas on what should I start debugging?
View 5 Replies View RelatedI was given a forensic Image which I now know is a DD image of the drive (Vista) and am trying to mount the image or extract the image to another drive. I'm not sure of the extention type or if the image is a partition or the entire drive. I think it is the entire drive.
Is it possible to mount a DD image to a device. If I can't do that I just want to extract the files to run some programs against the drive. Can I view the files under Ubuntu or do I have to remove the drive and stick it into a Vista computer.
I purchased a second drive today and was hoping the command line would be something simple.
Or am I on the wrong track, should I be doing this all in a windows environment. The reason I picked ubuntu was because of the reporting tools.
I would like to change my startup image (usplash image). For that i change /lib/plymouth/themes/ubuntu-logo/ubuntu_logo.png and /lib/plymouth/themes/ubuntu-logo/ubuntu_logo16.png. Then the splash screen of shutdown screen changes .But booting screen doesnot change.
View 2 Replies View RelatedI have a Canon iR3570/iR4570 PXL, and installed the driver CQue 1.0 TCP/IP Queue from Canon webpage.
The problem:
- if i try to print an OpenOffice or LibreOffice Calc with an image and text, the image is not printed (the space is blank).
- if i try to print an OpenOffice or LibreOffice Calc with just an image, it's printed great.
- if i try to print an OpenOffice or LibreOffice Impress, the images are not printed but the text is printed great.
[Code]..
Iam looking for an Image viewer that lets me delete images through an 'delete' button/option in toolbox.. Most of the image viewers uses edit menu-->delete option,but iam looking for an direct link,clicking on which deletes the image currently open in image viewer
???
When i open one of the web browsers i use and try to load a web site it's taking to long to respond and sometimes it doesnt load the website at all. I have tried with firefox,epiphany,opera with all the same results. I am sure that this is not a problem with my internet connection because i don't have these problems with windows.Also the network manager connection settings are correct
I also tried choosing the old kernel(2.6.32.24) to boot from but no success.The problem is the same as if i am using the 2.6.32.25 kernel. The strange thing is that i can download packages from synaptic with full speed. Last think.I have recently downloaded the recommended updates from the update manager but i don't remember what are the things that where updated.
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
I noticed my Firefox loading rather slow (took around 5 - 7 seconds to load and navigate pages, even google, and it would sometimes become unresponsive), I thought it may have been a addon problem, so I opened up a new Firefox profile with no addons but the browser crashed upon loading the certain page I was trying to view, and I figured I'd look into it later and use Chromium for a while (I'll be open, I was trying to watch an pron tube site, and when your, you know, you don't really feel like stopping to go technical and try to fix it or whatever), but Chromium said that the flash player wasn't installed. I thought it was kinda odd, but then again I didn't want to go technical and thought maybe since mozilla firefoxs engine loaded the flash, I'd use Mozilla Seamonkey which uses the same gecko engine. The flash wasn't working either on there.
I tried looking up to see if there was a 64bit deb package for flash, but they didn't have it, and I seen someone mention that doing the 'apt-get upgrade' upgrades it, so I did that, and it also said it installed some extra packages when doing it, but I figured it was just that getlibs grabbing the extra dependencies and went along with installing them (after all there shouldnt be much to lose since its from the repository, right?)
I restarted the computer to give the updates a chance to take effect (it didn't mention to restart, but I thought I'd go ahead and do it anyways to ensure it updated okay).
This is where the booting problem comes in: When my laptop restarted, the loading was going across very slowly (I have ubuntu studio installed through regular ubuntu, so it was showing the text filling up), normally it would just fill a little bit of the first "U" in "Ubuntu Studio" and then be done quickly, but now it goes slowly all the way, and when it fills "Ubuntu Studio", it stills stays there, it doesn't load on.
I pressed the down button to see the terminal and it says this:
Code:
I have no clue what to do now, and I wanted to ask for help before I go trying myself editing the command line boot process.
WTF why is it with every update the devs try to break something. Might as well be using Ubuntu at this point and No I do not want to install Stable. Todays updqate would bring in linux-image-2.6.39-1-686-pae linux-image-686-pae, but my CPU Single core Intel Pentium M (-UP-) cache 1024 KB flags (sse sse2) bmips 1196.07 clocked at 600.00 MHz doesn't use PAE so it told me to remove linux-image-686 and to install linux-image-486. So more shiny crap that doesn't support older hardware, it is getting to be as bad as Microsoft.
Why don't I just go upgrade or buy new hardware with every new shiny crap that wants to upgrade. If it isn't broken do NOT fsck with it.
[Code]...
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies View Related