OpenSUSE Install :: NVIDIA Xinerama Compiz - Almost There?
Nov 26, 2008
I heard a lot about NVIDIA Xinerama & Compiz not working but on looking further, in recent times people have got them to work. I've setup Xinerama with 4 monitors working across 2 dual video cards and it works great. I have the latest NVIDIA drivers (using the one-click) and I just installed the latest compiz using one-click as well.
The cards are as follows:
Chip: 0 is -> NVIDIA GeForce 8600 GT 01:00:0 0x10de 0x0402 AGP nvidia
Chip: 1 is -> NVIDIA GeForce 8600 GT 02:00:0 0x10de 0x0402 AGP nvidia
(I chose these because they have no fans and when working from home, quiet is nice to have!)
The following options are recommended to run compiz with NVIDIA and I have enabled them all at one point. However, looking through carefully I don't need to since using the latest drivers and having pretty good video cards all this seems to be (according to the documentation) automatically enabled.
[Code]...
View 4 Replies
ADVERTISEMENT
Nov 29, 2009
On openSUSE 11.1 I was able to configure KDE 4 for 2 monitors with sax2 (although the resolution was bad).On 11.2 neither SAX2 nor KRandR seem to work. The KDE User Guide says that a driver supporting version 1.2 is necessary. However the nvidia driver for eForce FX Go5200 seems to support only version 1.1.Is there a way to use both monitors with SUSE 11.2? I am quite desperate since for my work using only 1 monitor is definitely a handicap.
View 5 Replies
View Related
Jan 10, 2010
I would like to adjust Xinerama to place 1 desktop on each of my 2 monitors and not stretch a single over both. With the current set up there is a problem with window placement upon opening new widows or context dialog boxes. I realize that I could adjust placement properties and select window placement with the mouse but this is still lacking in productivity. My monitors are not next to on another so this is more of a problem than it seems.
View 4 Replies
View Related
Jul 8, 2010
Basically what has happened is that I have installed the nvidia drivers for a 9800 GT from the One-click install for the newer video cards. It seems to have succeeded although I am having difficult activating 3D effects. What happens is that whenever I activate Compiz settings, it works for about 2 seconds (wobbly windows is my test) and then quickly goes back to standard. Is this something I have done wrong or is my hardware incompatible? It works in other distributions I have tried so I'm assuming it is a fault on my part.
View 1 Replies
View Related
May 19, 2011
here's what I want:
Fedora 14
Radeon 5830
2 monitors(one 1920x1080, one 1920x1200) -- shared screen
Compiz
Gnome
It seems like you cannot run Compiz and Xinerama at the same time(correct?) So the solution is then to use XRandR right? I configured my xorg.conf using aticonfig --initial=dual-head. When I do that and reboot, everything works fine and Compiz is enabled! Hooray! But wait, there is a separate screen on each monitor and I can't drag windows between them. So I open amdcccle and change the monitors to share a screen(single desktop, multi monitor) and reboot... and my left monitor looks fine but the right monitor(the 1920x1200 one) looks corrupted. Strange text composited over, weird flickering, etc. I can't see the login prompt to type my password due to the corruption.
View 1 Replies
View Related
Mar 16, 2011
I've got a Dell Xeon with two video cards - an nVidia Quadro2 MXR/EX/Go and an ATI Radeon 7000/VE. Under Fedora 10 Xinerama worked just fine, but I recently upgraded to F14 and Xinerama no longer works.The X server tries repeatedly to start but fails, with gdm-binary eventually giving up in disgust. If I comment out the ''Option "Xinerama" "On"' line it starts up (see attached xorg.conf), albeit with a few quirks. I have two X screens (:0.0 and :0.1 - one for each monitor), where :0.0 works just fine but :0.1 has no window manager - I can bring up windows on it but they have no window border ( no min/max/close buttons, can't be resized, etc). The mouse moves freely from one monitor to the other, but windows don't.The error messages I get when I try to use Xinerama are as follows. In /var/log/messages I get:
Mar 10 10:32:41 valdez kernel: [60328.892005] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1
Mar 10 10:32:41 valdez kernel: [60328.892477] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1
Mar 10 10:32:41 valdez kernel: [60328.907615] [drm] nouveau 0000:01:00.0: nouveau_channel_free: freeing fifo 1
Mar 10 10:32:41 valdez gdm-binary[21435]: WARNING: GdmDisplay: display lasted 0.457045 seconds
[code]....
I've tinkered around with xrandr a bit but have had no luck - mostly the screen flickers briefly and things continue on as they were before.
View 1 Replies
View Related
Jan 21, 2010
so this is my first post but i have finally gotten linux installed. i currently have debian installed i have 2 different video cards installed
Radeon X600
GeForce4 MX 4000
i know you are probably saying, why in the world do i have an ATI and an NVidia in the same box? because i found one lying around and installed it. i have gotten X to start up and i have a separate X session in each monitor. what i want to do is enable Xinerama but when i put it in to my xorg.conf X wont start at all so basicly i was wondering where the problem lies.i am using the radeon and nv drivers i have read sometimes the nv drivers dont work and also that the module "glx" may also cause problems. i dont want to invest in a bunch of new video cards to get this to work but i just might have to. here is my xorg file
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" RightOf "Screen1"
Screen 1 "Screen1" LeftOf "Screen0"
[code]...
View 2 Replies
View Related
Jan 30, 2011
Recently installed Slackware, and now trying to get my two monitors working nicely. After much hair-tearing I've got Xinerama set up so that each monitor displays separate information.I'm using an nVidia 9800 GT dual-headed graphics card. This is my xorg.conf file:
Code:
Section "ServerFlags"
Option "Xinerama" "ON"
EndSection
[code]....
then the mouse is stuck on the right screen. It seems to recognise that the physical right monitor is the virtual right monitor, but if you try to move off the left side of the screen, it appears on the right side of the same screen. This seems to be similar to the bug described here, but that's meant to be fixed in v1.2.3 and I have v1.5.0 (according to pkgtool). I have also considered physically swapping the monitors, but then I would have to edit all the other OSes I use to know about the change, and also on principle I feel I should work out why it's not working...
View 2 Replies
View Related
Mar 24, 2011
I'm trying to set up a tri monitor setup. Unfortunately I must use 2 cards, one an AMD HD4350 and a PCI Geforce FX200. (Old skool I know) Due to the restrictions, I am forced to use the open source drivers (else nvidia glx will clash).
1: Use XRANDR to span the displays (this is what I did previous to the introduction of the third monitor and nvidia card to my system) I tried to do this, by setting up a second X screen on the NVIDIA card, disabling Xinerama; but after much googling I can't figure out the syntax for panning across 2 screens (X screens) in XRANDR, even tho it's >1.3, which supposedly supports multi card output.
2:Use Xinerama, sacrificing randr, and composite extensions. I also attempted to do this, with some limited success. I could get the NVIDIA screen to be right of the ATI, but I couldn't get 2 independent outputs running on the ATI card, even with "ZapohHeads" appended to one of the device sections for my ATI card.
View 1 Replies
View Related
Jun 5, 2010
I cant run my compiz. After updating the nvidia driver (current) and rebooting, i got a menssage saying that X is not working properly.
Denis@denis-desktop:~$ lspci
00:00.0 RAM memory: nVidia Corporation C51 Host Bridge (rev a2)
00:00.1 RAM memory: nVidia Corporation C51 Memory Controller 0 (rev a2)
00:00.2 RAM memory: nVidia Corporation C51 Memory Controller 1 (rev a2)
00:00.3 RAM memory: nVidia Corporation C51 Memory Controller 5 (rev a2)
[Code]....
View 3 Replies
View Related
Apr 13, 2010
I did my research and understand that RandR is replacing Xinerama and Sax2, it's a good thing in my opinion but it's not there yet -- at least not for my setupI fully admit, this is not a simple usage. Anyway, I have 4 monitors setup in an inverted "T" arrangement (think 3 in a row at eye level and one above the center monitor) on two NVIDIA 6800 GT cards.Out of the box the detection software gets my monitor details right for one of the monitors on the card it detects but not the other. So, I get 1680x1050 on one monitor and something silly like 800x600 on the other (does anyone have less capability than 1024x768 anymore? I think less than that as a default on anything other than a mobile device (like a smart phone) is pointless conservatism but I digress from the issue.)
My other NVIDIA card doesn't show at all so I am stuck with one good monitor setup, one bad, and 2 non-existent.Then I ran Sax2 and got some mode info. that I had to figure out myself in OSE 11.0 so that was nice (still didn't detect my full setup but it never did so that's fine). Next I took my xorg.conf file from my 11.0 installation and put it in the /etc/X11 directory of my new 11.2 installation (incorporating the updated mode info. for my monitor).I then installed the NVIDIA native drivers and it looked like everything was working as before.Except, after a while I noticed this error: "Xlib: extension "RANDR" missing on display ":0.0"." Coming up after various actions which prompted me to learn about RandR. Running "xrandr --version" I get this result:
xrandr program version 1.3.2
Xlib: extension "RANDR" missing on display ":0.0".
RandR extension missing
[code]....
View 9 Replies
View Related
Jun 23, 2011
During my research on enabling composite effects and xinerama, I stumbled upon a few threads and discussions which showed xserver 1.10+ has resolved the conflicts between the 2 modules. I'm wondering if anyone knows of someone/somewhere to get a SUSE compatible build of xserver 1.10+ ? If not, could someone point me toward an easy-to-follow tutorial on how to build packages for SUSE?
View 5 Replies
View Related
Apr 20, 2011
Today I bought a new monitor (IPS236V) to use it to watch movies and tv while I'm working on the other one.. I thought it's the best to activate Xinerama which could be done easy via CCC. But I'm not able to change the resolutions now as these panels are disabled in CCC. The first monitor is set to its native resolution, but the second is something lower.How can I configure both monitors to there native resolution?
View 5 Replies
View Related
Aug 15, 2010
I have installed Gnome to KDE and above mentioned problem discovered. Kontact was over the whole screen and rotation of display was to the left and right not above and down. After uninstalling compiz the mentioned problems are away.
View 4 Replies
View Related
Apr 9, 2010
When installing COMPIZ on KDE 4.3.5 and Opensuse 11.2 64 bit, I get the following error message: "compiz-kde4-0.8.4-167.x86_64 requires compiz = 0.84, but this requirement cannot be fulfilled. Is there any way to resolve this issue, and is the problem missing repos?
View 3 Replies
View Related
Jul 15, 2011
I'll be honest, I haven't searched around for this, so I apologize off the bat. I'm just curious - when I last had Ubuntu installed as a primary OS I could get Compiz working, but no games because I was using an ATI card. At the time, the overall impression was that everyone should be using Nvidia cards. ATI had issues with compositing that made it impossible to do desktop 3d plus compositing.
Now, I seem to be getting the opposite impression. Nvidia appears to be super locked down with less than great performance. So is my impression right? Which vendor is a better choice for a home desktop built for linux? I will be using Wine to play games, and I want to use compiz fusion for eye candy.
View 8 Replies
View Related
Jan 19, 2011
i know if u search a solution in forums u get so much confused information. i hope this little manual will help all with the nvidia driver problem! u dont need to edit or create a xorg.conf or something to run the driver correct and u need no blacklistedit too! if u did the standard opensuse 11.3 install its only about 2 kernel packages and the disabling of the x11noveau driver.
1. after standard installing opensuse 11.3 update and install the opensuse softwareupdates
2. install with the yast software re/installer:
(from Desktop or from the terminal. the terminal text command is: yast2)
[Code]...
u dont need to change the menu.lst after all, only u get many problems. run the midnight commander and delete the nomodeset word and the noveau driver would be normally still active after reboot.
View 6 Replies
View Related
Jul 12, 2010
I tried to install a package of extra Compiz Fusion plugins but it won't run. Says there is some kind of conflict or error. Anybody know where I can find this. The particular plugin I want is Show Mouse.
View 4 Replies
View Related
Aug 16, 2010
How can I make Compiz work on this eMac? It's the original, 700 MHz, 1 GB RAM, Ubuntu 10.04. It was enough trying to get the xorg.conf file to show any video, but now I want to be able to use compiz so I can have a faster experience.
View 4 Replies
View Related
Nov 19, 2010
I've been using this system for over a year with the built-in Intel G31 chipset graphics. Then I decided to get an nVIDIA card to run Folding@home, among other things. I found that I had to run the graphics off the nVIDIA card to get Folding to run, but that caused jerkiness. So then I discovered these instructions (which are one of several reasons I don't want to upgrade from Jaunty at this time.) I'm now using my Intel card for the display, and my nVIDIA card for Folding. The only problem with this setup is that I can't enable Compiz, or do other graphically-intensive stuff like certain games. For now I'm using Metacity. Running glxinfo provides me with the following nice message:
[code]...
View 3 Replies
View Related
Jan 25, 2011
Ever since I upgraded my video driver (the proprietary NVIDIA drivers) to 270.18, I have been experiencing lag when typing and when using Compiz as my WM. I can work around both problems by switching the WM to Metacity, but obviously I don't want to continue using that. I have tried changing my Compiz settings but to little avail. If you want my OS and graphics card, the OS is Ubuntu 10.10 and the graphics card is a NVIDIA GT 330M.
View 1 Replies
View Related
Jun 5, 2010
I have just upgraded to Fedora 13, and am trying to use the experimental Nvidia driver to enable Compiz desktop effects. The driver appears to be working correctly, but when I enable desktop effects, my text/icons/option menus are inverted (mirrored on both x and y axis's). Can anyone help me solve this issue? am i going to have to go to the proprietary Nvidia graphics driver?
View 8 Replies
View Related
Feb 13, 2011
A couple of issues with compiz. I'm setting up Debian Squeeze on a new-to-me laptop. Video card is nVidia Quadro FX 570M.
I installed the nVidia non-free driver, and that's working fine. Compiz starts up ok (I say "compiz --replace"). At least some of the effects are working, and the windows look normal.
First issue: as soon as I start Compiz, the number of workspaces goes from 4 to 2. And Workspace Switcher Preferences (the thing that pops up when you right-click the workspace switcher in the Gnome Panel) no longer shows the controls for changing the number of workspaces.
Is there is a way to change the no. of workspaces using gnome configuration editor? That might be a good workaround.
The second issue is, compizconfig-settings-manager will not run, whether Compiz is running or not. I don�t know if it would run before I installed the nVidia driver (Compiz wouldn't run so there was no reason to try CCSM). When I try to start it from the menu, I get the spinning cursor for several seconds, and that's all. When I say "ccsm" in a console...
Code:
I dont think the locale error is the problem. I get locale warnings all the time, like when I use apt-get, but it doesnt stop the program from running. But I could be wrong about that.
View 3 Replies
View Related
Jan 11, 2011
After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.
Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h
PATH:
Using: nvidia-installer ncurses user interface
ERROR:
View 9 Replies
View Related
Aug 18, 2010
gtkrecordmydesktop gives me crummy playback if i have compiz on is there a recorder that does not give this problemi attached a screen shot of the playback issue
View 1 Replies
View Related
Oct 10, 2010
Compiz works out of the box in Live systems when run on computers with integrated Intel graphics chips.Is there a way to make it work on system with Nvidia or ATI chips? Even if I have persistence enabled, downloading and installing the drivers does not carry over to the next session and it again throws up a "restricted drivers available/needed" prompt.P.S The purpose of doing this is for demos. Plugging in a live system and letting people play with whizbang effects is the best way to convert them
View 9 Replies
View Related
Aug 25, 2011
I have a geforce 8400GS and nvidia-current installed. However, the Additional Drivers app advises that "No proprietary drivers are in use on this system" and that the driver is activated but not in use. I know other people have complained about this problem, but for me this is breaking 3D content and I can't get compiz to work either. When I try to start compiz manually (compiz --replace), I get this error:
Code: compiz (code) - Fatal: Couldn't open display My Xorg has nvidia as device driver. I'm using the NVIDIA X Server settings program to setup my two monitors, so I know that this is what is in use. In addition to the compiz problem (which I can get over), sometimes I can see the desktop background through the active window. It's hard to explain so I'll take a screenshot when it happens again. Things I've tried:
1. Installing nvidia's latest drivers - The installer was extremely picky, constantly complaining about other modules and drivers. After I finally managed to remove everything it didn't like and install it, X wouldn't load.
2. Reinstall nvidia-current - tried multiple times with no change.
3. Link /usr/lib/xorg/modules/extensions/libglx.so to /usr/lib/nvidia-current/xorg/libglx.so.270.41.06 - didn't make a difference.
View 7 Replies
View Related
Dec 10, 2009
I have finally managed to get the nvidia drivers for my dell vostro 1500 laptop
It has GeForce Nvidia 8400M GS graphics card.
I have installed them according to the guide given by Leigh123
[url]
Now that is done, i am not able to get the compiz working,i wanted to update to nvidia drivers as i wanted to get that fire and water effect, they are so cool, I came to know that it was beryl earlier but not beryl has been stopped and its compiz which has now taken over.
Fc12 comes with compiz in the live CD. System >> Preferences >> desktop effects >> check radio button compiz
The system freezes and then the bug reporting tool comes up. kindly let me know which log files to upload which may help you to determine the problem better.
View 4 Replies
View Related
Dec 1, 2009
I'm a Karmic user, using a Nvidia Geforce 9500GT video Card.
I'm telling you about my GPU, because since I upgraded to the 190.42 Nvidia "official" new drivers, what's happening is:
My Compiz is no more able to save it's configuration across the sessions, and every time I close my PC or when I simply need to restart my active session, Compiz needs to be started again manually, It do not auto-activate by the compiz setting preferences.
Doing: System --> Preferences --> gnome-appearance-properties (TAB: "Visual effects") and click on "normal" checkbox, to activate the compiz visual effects.
Is there anyone able to teach me how to save the compiz activation, in order to avoid the manual, boring, repetitive, activation each time?
View 1 Replies
View Related
Feb 12, 2010
I installed compiz with nvidia trouble is when I run compiz white bars or lines (bars) appear in open windows (icewease, gedit, etc.). They disappear after a few moment and reappear when scrolling a page. BTW everything works fine with metacity running as window manager.
Here is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (randy@juliet2) Fri Sep 5 15:03:39 PDT 2008
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (randy@juliet2) Tue Jun 24 10:44:02 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I have the nvidia driver 173.14.09 installed. Running Debian Lenny stable x64 and turion x2 with a geforce 8200M G graphics card with dual screens. I first installed the debian repos compiz, then upgraded to the tuxfamily repo version. I installed the nvidia driver 190 from nvidia's website and that fixed it!
View 2 Replies
View Related
