I have a Ubuntu CD sent by Cononical . It runs slow because of my old computer . Now I have downloaded and burnt Lubuntu . Ubuntu Cd has an application Wubi which lets me install it inside XP .
Lubuntu dont have that app so I have to run live CD and install from there .The problems arrives in 5th step when I am asked to select a partition but it says no root selected . So I cant install Lubuntu .
I have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo:
Code:
Host Name: OWNER-PC
OS Name: Microsoftr Windows VistaT Home Premium
OS Version: 6.0.6001 Service Pack 1 Build 6001
OS Manufacturer: Microsoft Corporation
[code]...
i am new to linux and i nid a bash script to Delete selected backup files and also restore selected backup file to a user define directory.
View 3 Replies View RelatedI have a multi-user machine with several network interfaces (Ethernet, if that matters). I wish to grant selected users, or groups, full access to selected network interfaces (including ability to adjust IP address and to bind to low ports, but *only* on those interfaces). It is important to me that an user/group does not such full control over other interfaces. Granting partial, or temporary, root permissions is OK; it's a friendly environment.How do I go about it?System: Linux 2.6.recent; usual Debian setup (can be adjusted if needed).
View 2 Replies View RelatedIBM 600X Thinkpad, 328 MB RAM
This laptop is currently running Ubuntu 10.04 just fine....if you count running
a bit......slow.
I have heard good things about Lubuntu and that it can speed things up, and that it uses pretty much the same installer as Ubuntu. However, just after I select either TRY or INSTALL (it doesn't matter) the screen goes black and the computer reboots.
A fellow on another forum mentioned he has a IBM 600e with only 128 MB RAM running Lubuntu. The 600e is a lessor form of my 600X, both coming out the same year. So, technically, my 600X should have no problems as they are the same machine, I just have more RAM and a higher Mhz.
I can boot Lubuntu liveCD I burned on a desktop machine just fine so, on the face of things, it looks like the cd is OK.
I have 3 computers running Ubuntu 10.10 (2x regular Ubuntu, 1x Lubuntu) and I need VLC media player 1.0.6 (the version from Lucid). I cannot use the Maverick VLC player, I need an older one.What is the best way to install it? Is there a better option then installing it from source code?
View 9 Replies View RelatedNeed Lubuntu install howto
Laptop:512MB RAM (fixed)
Optical Drive - Fried
BIOS - No support for USB Boot
BIOS - Supports network boot
[code]...
What options available to install Lubuntu as the only OS? Need step-by-step howto.
Recently my disc drive died from unknown reasons and because of this i have no other variants of installing Lubuntu except using usb drive. I tried Unetbootin and usb-creator-gtk non of them worked. The "Try Ubuntu Without Installing" won't load in both situations.
View 7 Replies View RelatedHow to install multimedia codecs in Lubuntu?
View 9 Replies View RelatedI just installed lubuntu 10.10 onto my desktop and while on my first bootup I had the option to boot windows through grub, it's disappeared from the boot menu since then.When I installed I created a partition for lubuntu and installed onto that. I can still access and see my windows partition.
View 6 Replies View RelatedMy Specs;
Desktop PC, Tiger Direct, Firefly BCD.
Mother board; PC Chips M758LT - ID 9039E90F31D926C3.
Intel Celeron 1.3 GHz x86 Family 6 Model 11 Stepping 1.
Bios; American Megatrends Inc., 062710, 7/15/1997
SMBIOS Ver. 2.3
Memory; 512 MB
Master HD 20MB half full with 40MB Slave HD. WinXP service pack 3 and all updates are current, with one glitch, system will not 'restart' have to press off button, then have to press off button twice again to start XP running again. Tried to run off CD using xubuntu, Lubuntu 11.04 and Unbuntu 11.04. A page of errors covers the screen, I have a photo attached which I hope you can download and zoom in on.
It starts out with, 570.240718 Kernal panic - not syncing: Attempted to kill init! 570.24786 Pid:1, comm:init not tainted 2.6.38-8-generic #42-Ubuntu.... Regards, Michael A I'm going to mark this as solved. I have to add a 40mb hard drive and make it master and make 20mb hd the slave and add 2 - 256 ram instead of 128 memory. I have an issue where xp will not reboot so i intend to format both hd's and try to install 10.04.2 from cd for a full install, no windows. I will report back.
I am working on a project which aims provide 40$ computers to 3rd world students . I decided to use PIII with lubuntu . As I am new to Linux I have no idea how to install open office in Lubuntu I have downloaded it it is in (OOo_3.2.1_Linux_x86_install-deb_en-US.tar) format. how can I install it.
View 6 Replies View RelatedLinux newb here. I was looking for a lightweight distro that I really like and Lubuntu was it. I installed in on all three of my comps with out issues and my old Dell desktop(512mb ram) is flying now. Way faster than XP even right after a fresh install of both on the same desktop. On my fourth install, my girlfriends old toshiba laptop, it installed fine. After the restart and reboot it gets to the Lubuntu logo with the 5 dots under it. It gets through 4 of the dots then freezes. I left it for 20 minutes and it was stuck.
I tried booting from cd again and check disc for defects. It said it found 2 files with errors, press any key to reboot. Which I did and it just booted right back into the freeze. Maybe since I have to manually make it boot from cd every time it was wanting to boot back into the CD after the disc check, I'm not sure. I tried burning a new iso on a slower speed, same thing for a total of 3 reinstalls with the same effect. The only thing different about this install compared to my others is:
A) I had to flash the bios from windows before I started to even get the damn thing to be able to boot from CD
B) I decided to just wipe XP and install Lubuntu on the whole drive.
I've tried installing Lubuntu 11.04 without any success, it just hangs on the blue splash screen. The md5 checksum matches and the integrity of the cd is fine.Can anyone suggest an alternative distro that can be run on an old comp with 192 MB memory.
View 1 Replies View RelatedJust got Ubuntu (latest, greatest) installed. IIRC I selected 'auto loggin' from the install CD, but I'm unsure how this works. I have a user loggin 'ray' and a PW that's all OK. In the GUI, if I want to do something heavy it asks me for a PW which tells me that I'm 'root' at that time.But at the CL prompt I can't log in as root with no PW nor with the PW I use as 'ray'. BTW, is there somewhere I can bitch about the install CD? It was not an unpleasant experience, but I think it could be a bit better.
View 9 Replies View RelatedI installed a new Ubuntu OS in my computer, (I downloaded it yesterday) on a dual boot pc (windows xp) Installation went smooth until it reached grub-pc. It was installing grub-pc (1.98 lubuntu6). It hanged there for several hours. Finally I interrupted the installation. When I went to the installed packages I got a message telling: Grub-PC 1.98 Lubuntu 6 Failed to Install or Upgrade. I'm pretty new to Linux so I know nothing about it, but I wish to go away from Windows XP.
View 3 Replies View RelatedI have a pretty old acer lap top. I used to run xubuntu on it, then I formatted it and installed freeBSD just to check them out. I tried to install last version of xubuntu then, and I got a message that /dev/../loop0 couldn' d mount or sth then I learned about lubuntu and I tried to installed them but I tried both a dvd and a cd and on both cases after I select language and "install on this machine" I just see a screen with 4 red dots writing "Ubuntu 10.10" that stays like this forever.. and nothing happens. the same if I select to boot from the cd just to check the environment. I then tried a ubuntu-studio dvd I had handy just to see if this would work - and it started installing as expecting, I cancelled it after a while. how to get lubuntu running?
View 4 Replies View RelatedI'm trying to install Lubuntu 10.10 on a board with a AMD Geode LX800 @ 500MHz and 256 MB of memory. I've been sucessful in running in Live Cd mode from a CF card, however when trying to install it gets stuck with either this message "syscall_call+0x7/0xb" or this "kernel_thread_helper". I've tried to install with this parameter "acpi=off", but still no sucess.I've tried to install from a external cd drive to a CF, from a USB pen drive to a CF, from a CF to a HDD, etc...
PS. I've also tried other distros however only this and Xubuntu were able to go into Live CD mode, and Xubuntu was slow, very slow.
The options for installation mention Ubuntu, but not lubuntu, is there some way to install flash for Lubuntu?
View 5 Replies View RelatedI'm currently stuck at the "lubuntu - Install lubuntu" screen on a Dell Optiplex GX150 (specs; Pentium III 1 GHz, 512 mb RAM, 20 GB HDD). I can hear the CD spinning up but nothing happens. Looking at the specs, the PC should be able to run lubuntu, right? Could somebody point me in the right direction? I've verified both the ISO and the CD checksum, both check out, so there should be no issue with the install media
View 1 Replies View RelatedI've been trying to install Ubuntu Server on an old server since a couple of days and have been unsuccessful. I've google'd a bit but found no solid solution yet to this problem. Everything goes fine and I'm able to partition my SCSI drives and everything. After the installation starts unpacking and copying files this happens. I have to mention that I'm installing from a USB drive with the following added at the end of the normal install options:
Code:
--install cdrom-detect/try-usb=true
Version I'm trying to install: Ubuntu 9.10 i386 Server
CPU: AMD Athlon XP 2000+
RAM: DDR 2*256MB
MOBO: ECS K7VTA3 VIA KT266A socket A DDR
To make Ubuntu work on my computer I need to select the noapic option NOW How do I make certain that the noapic option is selected always when ubuntu starts after ubuntu has been installed?I would like to install Ubuntu 10.10 on my computer togheter with windows 7
View 4 Replies View RelatedI have installed Ubuntu 10.04. I have ultimate edition that has almost all packages. Now, i would like to install selected packages from ultimate edition. I need a to know how to install the selected packages by resolving the dependencies locally.
View 1 Replies View RelatedIf we install patach in RHEL5 then we use "yum update" command but it will install all the available patches in the list, but if i want to install any specific patch then how to install this? Is it via "yum update ??"
View 3 Replies View RelatedI installed Lubuntu 10.04 yesterday (yay, my first serious installation!), and I was trying to install the drivers for my video card (GeForce 6200), when it told me that it couldn't use ld. After oing some research I found out that it was in binutils. So I went over and got it and tried to ./configure it when it told me that there weren't any C compilers in $PATH, so I went over to the gcc homepage with a fine-toothed comb and found gcc 4.5.0. When I tried to./configure it, it also told me that there aren't any C compilers in $PATH.
View 4 Replies View RelatedI installed Mac OS X 10.6, Windows 7 Ultimate, and made 4 partitions.OSX and 7 installed fine, but when I tried to install SUSE, it stopped at 92%.I get this error:
Code:
grub>setup --stage2=/boot/grub/stage2 --force-lba (hd0,3) (hd0,3)
Error 17: Cannot mount selected partition
grub> quit
I have OpenSuse11.4 32bits, 4Gb of RAM
[code]...
I would like to add the option mem=4096M to make some software works. but as long as I try with more than 512M, I have the error: error 28 selected item cannot fit into memory.
I am trying to use kickstart to create a master boot disk for all of my server installs. Unfortunately it seems to be missing some of the packages specified and I can't figure out why. Here is the packages section of my ks.cfg file
Note: all at symbols have been replaced with # because the forum filter seems to think they are urls.
%packages
#admin-tools
#base
#core
#dns-server
[Code].....
I recently installed SuSE 11.1 (64 bit) on my system
AMD Phenom II 940 3.0 Ghz;Biostar TA790GX 128M Motherboard with ATI Radeon HD 3300 Graphics card built in;
4 Gb (2*2 sticks) DDR2 800 MHz RAM
The installation went smoothly, But on first restart and login (and subsequent ones too!) I get a light purple screen with a skyblue box at top left corner, with xconsole written on it. when I Left click anywhere on the screen, I get a popdown with a number of options, of which only XTerm (bash shell) and exit (logout) options work. Now I know the HD 3300 graphics card drivers are not built into the SuSE 11.1 distribution, and I have already downloaded them (Linux ones)from ATI website. I login as Superuser, and type init 3 to go to a very basic screen,login as user, change to superuser again and then run the following file i downloaded from ATI:
sh ati-driver-installer-9-4-x86.x86_64.run
The result/output at the command prompt:
Created directory fglrx-install.ubanI5
Verifying archive Integrity... All good.
Uncompressing ATI proprietary linux driver-8.602...
.....(lot of dots)...
ati-driver-installer-9-4-x86.x86_64.run: line 295: ./ati-installer.sh: Permission denied Removing temporary directory: fglrx_install.ubanI5
Once again, i tried everything in superuser login.
Also I tried making changes via sax2 command, it doesnt seem to work. A window opens where I see that my graphics card has been detected but thats about it. nothing else in that option, everything is greyed out (nothing to be selected)
I have a compaq server machine (ProLiant DL380 G2) that I'm trying to install Ubuntu Server on at the moment
However when I select "Install Ubuntu Server" it hangs with a flashing cursor
At first it was displaying an error message:
"create_floppy_devices[195]: specified group 'floppy' unknown"
But then after I disabled the diskette boot option and the integrated diskette controller in the BIOS it has just started to hang with no on screen messages at all (this is true if one or the other of these options is enabled)