Ubuntu Installation :: Can't Install Xubuntu - Lubuntu
Jun 5, 2011
My Specs;
Desktop PC, Tiger Direct, Firefly BCD.
Mother board; PC Chips M758LT - ID 9039E90F31D926C3.
Intel Celeron 1.3 GHz x86 Family 6 Model 11 Stepping 1.
Bios; American Megatrends Inc., 062710, 7/15/1997
SMBIOS Ver. 2.3
Memory; 512 MB
Master HD 20MB half full with 40MB Slave HD. WinXP service pack 3 and all updates are current, with one glitch, system will not 'restart' have to press off button, then have to press off button twice again to start XP running again. Tried to run off CD using xubuntu, Lubuntu 11.04 and Unbuntu 11.04. A page of errors covers the screen, I have a photo attached which I hope you can download and zoom in on.
It starts out with, 570.240718 Kernal panic - not syncing: Attempted to kill init! 570.24786 Pid:1, comm:init not tainted 2.6.38-8-generic #42-Ubuntu.... Regards, Michael A I'm going to mark this as solved. I have to add a 40mb hard drive and make it master and make 20mb hd the slave and add 2 - 256 ram instead of 128 memory. I have an issue where xp will not reboot so i intend to format both hd's and try to install 10.04.2 from cd for a full install, no windows. I will report back.
View 4 Replies
ADVERTISEMENT
May 13, 2010
So, I tried reviving my old windows laptop by installing Ubuntu on it, but it turned out to be too heavy for it, so i turned towards Lubuntu and Xubuntu.
Now, for the couple of days I used Ubuntu, until i decided it's moving too slow and I should go for a lighter version, my USB wireless adapter (and the touchpad, but that's a subject for another subforum) worked fine.
When I installed Lubuntu and Xubuntu, it stopped working. I tried using network-manager and wicd to make my adapter scan for wireless networks, but it's like the USB isn't even there. When I pulled it out and stuck it on my main PC (that is running Ubuntu), it was discovered immediately and connected to my router. But I can't do it on either Xubuntu or Lubuntu.
PS: If anyone has a quick hint about why my touchpad is working during the installation of Xubuntu, but not after it's complete and loads the desktop, I'll make a new post in the relevent section. A USB mouse works fine everywhere, but a touchpad isn't moving the pointer.
View 9 Replies
View Related
Jan 12, 2010
I was thinking of creating an extremely minimal version of Xubuntu using XFCE. I have a Dell Mini 9, a netbook that uses a wireless-g card requiring bcmwl-kernel-source to work.What I would like to do is use either the alternate CD or mini.iso minimal install file to perform a command line install-style installation of the system.So far, what I am thinking (from reading this [url].... article:
HTML Code:
http:[url].....is to start off with these packages to begin with:
xorg
slim (if possible with 9.10, unsure if it is still available. in short, i want to use a lightweight display manager)
xfce4
xfce4-goodies
xubuntu-default-settings
bcmwl-kernel-source
aptitude
My opening questions are: Should I go with mini.iso or the Xubuntu Alternate Install CD (or the Ubuntu one)? If so, which one? What additional packages will I need to make the hardware accessible and fully functional? All I can think of so far would be sound (I'd like to stay away from PulseAudio if possible, it wreaks havoc with my computer), my webcam, and the memory card slot, if additional packages are needed for it?What other "core" packages should I include in this list? Should I include Synaptic, or other packages, and why?What do I need to take into consideration, since this is both a directly- and battery-powered computer?
HTML Code:
http://ubuntuforums.org/showthread.php?t=1155961
post regarding a "Ubuntu-Desktop-Minimal"-type system.
View 5 Replies
View Related
Apr 12, 2011
Need Lubuntu install howto
Laptop:512MB RAM (fixed)
Optical Drive - Fried
BIOS - No support for USB Boot
BIOS - Supports network boot
[code]...
What options available to install Lubuntu as the only OS? Need step-by-step howto.
View 4 Replies
View Related
Apr 26, 2011
I just installed lubuntu 10.10 onto my desktop and while on my first bootup I had the option to boot windows through grub, it's disappeared from the boot menu since then.When I installed I created a partition for lubuntu and installed onto that. I can still access and see my windows partition.
View 6 Replies
View Related
Aug 23, 2010
Linux newb here. I was looking for a lightweight distro that I really like and Lubuntu was it. I installed in on all three of my comps with out issues and my old Dell desktop(512mb ram) is flying now. Way faster than XP even right after a fresh install of both on the same desktop. On my fourth install, my girlfriends old toshiba laptop, it installed fine. After the restart and reboot it gets to the Lubuntu logo with the 5 dots under it. It gets through 4 of the dots then freezes. I left it for 20 minutes and it was stuck.
I tried booting from cd again and check disc for defects. It said it found 2 files with errors, press any key to reboot. Which I did and it just booted right back into the freeze. Maybe since I have to manually make it boot from cd every time it was wanting to boot back into the CD after the disc check, I'm not sure. I tried burning a new iso on a slower speed, same thing for a total of 3 reinstalls with the same effect. The only thing different about this install compared to my others is:
A) I had to flash the bios from windows before I started to even get the damn thing to be able to boot from CD
B) I decided to just wipe XP and install Lubuntu on the whole drive.
View 9 Replies
View Related
Apr 30, 2011
I've tried installing Lubuntu 11.04 without any success, it just hangs on the blue splash screen. The md5 checksum matches and the integrity of the cd is fine.Can anyone suggest an alternative distro that can be run on an old comp with 192 MB memory.
View 1 Replies
View Related
May 30, 2010
I installed a new Ubuntu OS in my computer, (I downloaded it yesterday) on a dual boot pc (windows xp) Installation went smooth until it reached grub-pc. It was installing grub-pc (1.98 lubuntu6). It hanged there for several hours. Finally I interrupted the installation. When I went to the installed packages I got a message telling: Grub-PC 1.98 Lubuntu 6 Failed to Install or Upgrade. I'm pretty new to Linux so I know nothing about it, but I wish to go away from Windows XP.
View 3 Replies
View Related
Jan 24, 2011
I have a pretty old acer lap top. I used to run xubuntu on it, then I formatted it and installed freeBSD just to check them out. I tried to install last version of xubuntu then, and I got a message that /dev/../loop0 couldn' d mount or sth then I learned about lubuntu and I tried to installed them but I tried both a dvd and a cd and on both cases after I select language and "install on this machine" I just see a screen with 4 red dots writing "Ubuntu 10.10" that stays like this forever.. and nothing happens. the same if I select to boot from the cd just to check the environment. I then tried a ubuntu-studio dvd I had handy just to see if this would work - and it started installing as expecting, I cancelled it after a while. how to get lubuntu running?
View 4 Replies
View Related
Feb 4, 2011
I'm trying to install Lubuntu 10.10 on a board with a AMD Geode LX800 @ 500MHz and 256 MB of memory. I've been sucessful in running in Live Cd mode from a CF card, however when trying to install it gets stuck with either this message "syscall_call+0x7/0xb" or this "kernel_thread_helper". I've tried to install with this parameter "acpi=off", but still no sucess.I've tried to install from a external cd drive to a CF, from a USB pen drive to a CF, from a CF to a HDD, etc...
PS. I've also tried other distros however only this and Xubuntu were able to go into Live CD mode, and Xubuntu was slow, very slow.
View 2 Replies
View Related
Jun 4, 2011
I'm currently stuck at the "lubuntu - Install lubuntu" screen on a Dell Optiplex GX150 (specs; Pentium III 1 GHz, 512 mb RAM, 20 GB HDD). I can hear the CD spinning up but nothing happens. Looking at the specs, the PC should be able to run lubuntu, right? Could somebody point me in the right direction? I've verified both the ISO and the CD checksum, both check out, so there should be no issue with the install media
View 1 Replies
View Related
May 5, 2010
I installed Lubuntu 10.04 yesterday (yay, my first serious installation!), and I was trying to install the drivers for my video card (GeForce 6200), when it told me that it couldn't use ld. After oing some research I found out that it was in binutils. So I went over and got it and tried to ./configure it when it told me that there weren't any C compilers in $PATH, so I went over to the gcc homepage with a fine-toothed comb and found gcc 4.5.0. When I tried to./configure it, it also told me that there aren't any C compilers in $PATH.
View 4 Replies
View Related
Feb 20, 2010
The harddrive of an old laptop of mine recently died. Until I can replace it, I would like to use the xubuntu live-cd. However I would also like to be able to install some additional packages and change some settings, so it would be great if I could make it persistent. I know that it's possible to install to an usb-pendrive, but the problem is that the laptop isn't able to boot from usb-devices.
Is it possible to install xubuntu to usb, but boot the system wiith the live-cd? Or is there another way to use an usb-pendrive to keep some settings/packages?
View 2 Replies
View Related
Jun 28, 2010
I am trying to upgrade to Xubuntu 10.04 from a Slakware install. I downloaded the ISO image, burned that to a CD, and then created a floppy with SBM.bin image. The system is an old i386 which has a BIOS that will not boot from CD. I can mount and read the CD under the currently installed Slackware system with no problem. When I boot from the floppy I get a menu that shows the hard drive and the floppy as boot options, but not the CD. The CD drive is an ide on the same controller as the hard drive with the hard drive being master and the CD drive being slave.
View 2 Replies
View Related
Jun 23, 2011
I have tried twice to use Wubi to install Xubuntu on a Windows XP machine. Each time the results were the same:
1) Downloads the required stuff.
2) Does some post-download stuff.
3) Says it needs to reboot to finish the installation.
-------------- here is where it goes bad -------------
4) Reboots back into Windows. There is nothing set to choose Xubuntu (no error messages displayed in prior steps).
Has anyone else encountered this bug?
View 3 Replies
View Related
Nov 28, 2010
I installed Xubuntu (Karmic 9.10) several times on an old iMac G3 with powerpc processor. Previously I had installed versions as 6.06 and 6.10 succesfully. But no luck this time. All installs were succesfull if alternate cd's were used.
The problem is that when i boot up i see the bootloader 'yaboot' and after that shortly the mouse logo from Xubuntu. After that the screen turns black and the indication light from the powerbutton turns from green to orange, this means no signal (i guess).
I assume that my screen resolution is wrong and cannot be displayed, the Mac uses 1024x768 if i am right.
My question is : How to access any configuration file to change resolution as I believe is the problem?
Edit: Perhaps there is a way to access command line to change config files.. ? Or using a live CD, but this computer is low on memory and has a hard time using live-CD's.
View 1 Replies
View Related
Feb 19, 2010
I made an xubuntu disk.loaded it and rewrote my hardrive.on a pretty old averatec laptop. 3/4 of the install it gives a a io error and stops the install.I tried to reinstall from the screen again but got the same error.So I rebooted and it skips everything and goes straight to a grub loading stage 1.5, grub loading error 17. It even skips the live cd.I also tried to do it thru a usb stick but that gets ignored too.
View 3 Replies
View Related
Oct 6, 2010
I downloaded the 6.06 version of xubuntu because i have a laptop that doesnt support high graphics mode, and i wasnt able to figure out how to get it to run in low graphics mode. i figured that i would get a version from a while back, and then update it up to the current version. now, to the problem. I was able to upgrade 6.10, but now it says Ubuntu version 8.04 available, so i tried to update it. it gets most of the way through the part where it says calculating or something like that, and then it says: "Can't install 'xubuntu-desktop' It was impossible to install a required package. Please report this as a bug." with an option that says close at the bottom. when i click close another window pops up that says: Could not calculate the upgrade A unresolvable problem occurred while calculating the upgrade. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bugreport. Then the window just closes... anything that i could do to get rid of this problem? EDIT: Is there any way to update directly from an .iso file on the desktop?
View 1 Replies
View Related
Jan 22, 2010
I have an old laptop, and am a basic linux user, but this install is crazy. I know that I have to have acpi=off to work, and got Linux Mint 7 installed from the live cd but want Xubuntu. The Xubuntu 9.1 live CD works fine as long as I put the acpi=off parameters in the boot string, and I check the additional options just to be sure. But after install I cannot even get into the grub, it says grub loading for a split second then blinking cursor
View 2 Replies
View Related
Mar 31, 2011
IBM 600X Thinkpad, 328 MB RAM
This laptop is currently running Ubuntu 10.04 just fine....if you count running
a bit......slow.
I have heard good things about Lubuntu and that it can speed things up, and that it uses pretty much the same installer as Ubuntu. However, just after I select either TRY or INSTALL (it doesn't matter) the screen goes black and the computer reboots.
A fellow on another forum mentioned he has a IBM 600e with only 128 MB RAM running Lubuntu. The 600e is a lessor form of my 600X, both coming out the same year. So, technically, my 600X should have no problems as they are the same machine, I just have more RAM and a higher Mhz.
I can boot Lubuntu liveCD I burned on a desktop machine just fine so, on the face of things, it looks like the cd is OK.
View 8 Replies
View Related
Oct 24, 2010
I have 3 computers running Ubuntu 10.10 (2x regular Ubuntu, 1x Lubuntu) and I need VLC media player 1.0.6 (the version from Lucid). I cannot use the Maverick VLC player, I need an older one.What is the best way to install it? Is there a better option then installing it from source code?
View 9 Replies
View Related
May 12, 2011
Recently my disc drive died from unknown reasons and because of this i have no other variants of installing Lubuntu except using usb drive. I tried Unetbootin and usb-creator-gtk non of them worked. The "Try Ubuntu Without Installing" won't load in both situations.
View 7 Replies
View Related
Jan 14, 2010
I have a LiveCD of the Lubuntu Lucid 10.04 Beta. First, I will say, I'm extremely impressed with Lubuntu. It's incredibly lightweight, pretty intuitive to use, and very pretty when compared to other distros of comparable weight (eg, MEPISLite, wattOS etc.) The only problem is that when I click "Install Lubuntu," NOTHING HAPPENS. Is it just because it's the Beta?
View 8 Replies
View Related
Jun 15, 2010
How to install multimedia codecs in Lubuntu?
View 9 Replies
View Related
Sep 9, 2010
I have a Ubuntu CD sent by Cononical . It runs slow because of my old computer . Now I have downloaded and burnt Lubuntu . Ubuntu Cd has an application Wubi which lets me install it inside XP .
Lubuntu dont have that app so I have to run live CD and install from there .The problems arrives in 5th step when I am asked to select a partition but it says no root selected . So I cant install Lubuntu .
View 2 Replies
View Related
Oct 14, 2010
I am working on a project which aims provide 40$ computers to 3rd world students . I decided to use PIII with lubuntu . As I am new to Linux I have no idea how to install open office in Lubuntu I have downloaded it it is in (OOo_3.2.1_Linux_x86_install-deb_en-US.tar) format. how can I install it.
View 6 Replies
View Related
Jun 24, 2010
I recently installed Lubuntu to a USB. It was up and running and worked fine, however, upon exiting and going to boot into windows, I noticed it had installed a GRUB bootloader. I use whole disk encryption on windows, which has its own bootloader, so I can't be having some other bootloader on the PC interfering with this. I used my rescue disk to restore my WDE bootloader, but the USB stick will not boot now.
I also tried using pendrivelinux but this copies the live cd version onto the USB stick and nothing saves when you log off.installing Lubuntu to USB without a boot loader?
View 4 Replies
View Related
Aug 29, 2010
I want to try lubuntu on my comp which already has ubuntu and win7 dualboot. I intend to make a new partition for lubuntu 's '/' and let it share /boot with ubuntu.
View 6 Replies
View Related
Jun 2, 2010
The options for installation mention Ubuntu, but not lubuntu, is there some way to install flash for Lubuntu?
View 5 Replies
View Related
Nov 15, 2010
I downloaded the Lubuntu 10.10 Live-CD ISO and burned it to a CD-RW disc. The Lubuntu Live-CD fails to boot on my secondary PC. It boots fine on my primary PC. The PC on which Lubuntu fails to boot is a Dell Dimension L (year 2000). Celeron 566 MHz. 192 MB RAM. That PC has Xubuntu 10.10 installed on HDD. Xubuntu runs fine. The PC on which Lubuntu boots OK is a Dell Dimension 4100 (year 2000). PIII 733 MHz. 512 MB RAM. The failing boot progresses to a point where I get a purple screen showing "Ubuntu 10.10". Underneath the "Ubuntu 10.10" is a progress bar consisting of four dots. The progress bar continually shows progress, but after a few minutes there is no HDD or CD activity. After about seven minutes I get a blank bluish-gray screen. After waiting an additional five minutes I pressed "Enter" and was returned to my original purple screen. The progress bar continued to show progress, but there was no HDD or CD activity.
View 2 Replies
View Related
