Ubuntu :: Can't Overclock Correctly - Cannot Set Freq 16000[32000] To Ep 0x86
Oct 17, 2010
I am trying to get a stable overclock on my processor and if it's not set to exactly 3.2GHz or 2.66GHz (stock clock) I get this message. Using sysinfo, the OS does not register over 3.2GHz even when I have it clocked @ > 3.2
All the google searches and bug reports seem to talk about sound problems and webcam issues being the cause, but I've had this problem since I switched to Ubuntu and have not yet found a resolution.
View 3 Replies
ADVERTISEMENT
Oct 24, 2010
I recently switch from Windows 7 to Ubuntu 10.04 and then to 10.10. When I had Windows 7 running I was overclocking via manual settings in my BIOS. I am almost positive I had the same overclocking settings in my BIOS when I had 10.04 as well.
For some reason though when I use the same settings with 10.10 it tries to but up, but it just says it will restart in 30 seconds. I have no idea why. I know the overclock is stable as I have been using it for a year or more. This seems to just happen when I got 10.10.
View 2 Replies
View Related
Feb 7, 2010
BIOS says 3.72GHz
Sysinfo and hardinfo show 3.2GHz (old clock)
what do I need to do for this update properly? (yes...I am trying to fry my system so I have an excuse to buy my i7 wishlist package on newegg )
Quote:
View 9 Replies
View Related
Apr 19, 2010
I am looking for an app that behaves like CPU-Z for windows, because I am desperately wanting to overclock my CPU. However, I don't want to do it without a CPU monitor that monitors heat/clockspeed/voltages/etc.
View 3 Replies
View Related
Apr 22, 2010
i recently purchased an i7 laptop and really don't want 8 cores on my bar. i remember there being a file that controlled this but i believe it wasn't writeable.
View 4 Replies
View Related
Oct 12, 2010
Is there a way to edit the color of the text to white so I am able to see it? Example of the current text color in this attachment, see top right corner first scaling icon next to system monitor;
View 2 Replies
View Related
May 27, 2011
Just now did a clean install of Ubuntu 11.04 into Dell PowerEdge 1750 using KVM console and 15" monitor. When booting into Ubuntu, the monitor went "frequency out of range". After reading Ubuntu forum someone suggested holding left shift while Grub is loading, it wouldn't even budge.
View 9 Replies
View Related
May 19, 2010
Does anyone know of a similar easy to use interface for over-clocking with ATI cards?
I found this one that works with nvidia but haven't had much luck finding any others:
http://www.econowics.com/linux/298/t...-ubuntu-linux/
View 6 Replies
View Related
Apr 28, 2011
I've installed Debian 6.0.1 with kernel 2.6.32 and I've got an issue with my Ayre QB9 usb soundcard.MPD says: problems opening audio device. I have MPD running as root.Below I've copied a bit of output from terminal that might give someone a clue.dmesg (The second to last OSS line I've only seen once, but as it involves audio I though I might include it. The last line is sometimes there and sometimes not. I can't figure out why.
[779.384053] usb 5-1: USB disconnect, address 2
[783.028037] usb 3-2: new full speed USB device using uhci_hcd and address 2
[783.249119] usb 3-2: New USB device found, idVendor=21b4, idProduct=0130
[code]...
View 4 Replies
View Related
Mar 19, 2011
How to overclock my computer, I just got a master gear so I can overclock computer till I can upgrade the cpu. Its AMD.
View 3 Replies
View Related
Jul 22, 2015
I recently purchased a replacement CPU & motherboard and, with a grand after-market CPU heatsink and fan, was able to create a stable overclocked system of 3.8/3.9GHz (from a stock of 3.2GHz).
However, when I run, say, Code: Select alllscpu, Code: Select allcpuid (after installing said package) or Code: Select allless /proc/cpuinfo it only lists the stock speeds of 3.2GHz.
What would be the best way within my operating system to view my current clock speeds?
View 10 Replies
View Related
Jan 25, 2010
Is it possible? Its an Acer Aspire One.
View 1 Replies
View Related
Mar 20, 2010
Can I Overclock my CPU from Linux? In Windows I Can use Sysclock but is there anything in linux that can increase the clock speed of the CPU.
View 2 Replies
View Related
Mar 14, 2010
Last Thursday, 3/11, I installed a new mother board (ASUS M4A785TD-V EVO), AMD Athlon II X4 Processor, 4Gig DDR3 ram (RIP JAWS), 1 SATA DVD drive, along with my 2 IDE HDD's. The display was OK during BIOS review, and boot UNTIL it came to mounting x-graphics, at which point the screen went black, and a display message came up saying Out-of-RangeHf: 30KHz-70KHzVf: 50Hz-90HzCurrent Frequency:90.3KHz, 60.0Hz.
Does anyone know what is causing this? I mean, is there no way that Deb 5 X86 is going to run on a quad 64-bit system, or can something else be wrong? Before changing hardware, I had seen indications that this system was backward-compatible to older systems, and the more in depth study I've done since seems to verify this.y be, however, that I completely mis-understand what I am reading - this is all pretty new to me.
I tried booting into Debian 4, Libranet 3, and Linspire 6. They all complained loudly, but differently, about x being inoperable. I can't tell you how they complained because I can't go back and check them. THAT is because, in BIOS, I was testing the system with all the different options for "Internal Graphics", to see if one would work. One of these options was "Disabled". Oh-ho-ho! BAD MOVE!!! it's disabled, all right, including BIOS! I can't believe it. There was no warning, whatsoever. I assumed no engineer in his right mind would allow that option to lock out the BIOS without SOME kind of warning. I'm going to try to call ASUS tech support tomorrow to see if they have a solution, but if anyone knows how to reverse this, please let me know. I suppose the only answer is a separate graphics board. But I don't want to get that if I can't use this MotherBd.-processor setup.
View 11 Replies
View Related
Feb 16, 2010
Now I have never done this "Overclocking" stuff, It seems like it would be of great use. My laptop isn't in any way good in those departments. Thus I want to try and upgrade them, the cheap way.
View 8 Replies
View Related
Jun 15, 2011
I run F15 on my desktop PC. I've run gkrellm on my desktop since FC5. This week I tried to add the gkrellm plugin gkrellm-freq via "Yum extender". The install appeared to be successful, but when I invoke gkrellm configuration gkrellm-freq does not appear on my list of gkrellm plugins. Also, gkrellm is not displaying the cpu frequency info.I use other gkrellm plugins (weather, sun) and they work fine.
[alfrugal@localhost ~]$ rpm -qa | grep gkrellm
gkrellm-weather-2.0.7-9.fc15.i686
gkrellm-freq-1.0-11.fc15.i686
[code]....
View 1 Replies
View Related
Jul 25, 2010
placed for the decision to by a quad intel processor with more speed i was searching the internet for a 3ghz quad as i stumbled on a artikel saying overclock a q6600 from 2.4 to 3.0 ghz in 30 seconds I only had to set the frontbus speed to 1333 and vcore to 1.325 memory 800 / 8 gb had to be set to dram=1.9 ht=1.3 nb=1.3 sb=1.3
Speedup the videocard i set the pcie to 124 mhz And all is running rocksolid ..... video and vlc video 3 tab on google-chrome i had a load off 13% on the cpu's no video problems what so ever and no overheating no more as 49degr C Total cost 0 $ and 10 minutes editing the bios and some reboots.
View 1 Replies
View Related
Mar 31, 2010
When I installed Wicd, and ran it for the first time, I got an error something like: "Could not connect to Wicd's dbus session- check the Wicd log file for more info". However, later when I restarted my computer, Wicd started, but I can't connect to my network, it shows up as <hidden>, I can connect to linksys, so I know that wireless is working on that computer. I know that there's nothing wrong with my wireless router, because I can connect to my network in this computer.
View 3 Replies
View Related
Jan 20, 2010
For 6 months I have used this computer as a ediacenter/seedbox on a decent TV. It crapped out and we got a new one. Hooked it up, had super messed up resolution. Ran some command (really don't remember) that ran you through the setup configuration asking for keyboard layout etc.
Didn't work. Deleted xorg.cong, didn't work. Blank xorg.conf, didn't work. What happens is it shows the Ubuntu name and loading bar, loads, then at 100% it shows 2 of them in purple around the screen. Obviously X isn't loading correctly.
[code]...
View 1 Replies
View Related
Mar 17, 2010
I just installed ubuntu 9.10 (latest version + updates) on my computer. I am new to the linux OS.I have a 1366x768 resolution monitor with a maximum vertical frequency of 60 hz. This worked well on windows. As I've already read in the internet, this can rise problems on Ubuntu. The monitor is connected through a switchbox, so it doesn't get recognised. Even if it's hooked up directly (Ubuntu recognises it) I can't choose the correct resolution.
Currently I can't use another graphics driver than the generic one. The screen stays black ("wrong vertical frequency" displayed on LCD Monitor) if I use another driver. I'd like to use the proprietary ATI/AMD fglrx driver. I edited the xorg.conf file, but I was unable to get the right resolution. It seems to be outdated on Ubuntu 9.10. After that fail, I searched for alternatives and ended up with a file called
45custom_xrandr-settings
in the "Xsession.d" folder. I'm using the following contents:
Code:
xrandr --newmode "1366x768_60.00" 85.86 1368 1440 1584 1800 768 769 772 795 -HSync +Vsync
xrandr --addmode VGA-0 "1366x768_60.00"
xrandr --output VGA-0 --mode 1366x768_60.00
But the monitor still complains that it's the wrong vertical frequency when I use the fglrx driver. The generic driver uses another resolution than the specified one (as always) and gives me a blurry picture on the screen. I have also tried other modelines, Ubuntu just doesn't seem to be able to display 1366x768@60hz.
View 8 Replies
View Related
Sep 28, 2010
I cannot get PAE to work on lucid. I have 4 GiB of RAM installed, but System Monitor says "Memory: 3.3 GiB".
Code:
$ uname -a
Linux hal 2.6.32-25-generic-pae #44-Ubuntu SMP Fri Sep 17 21:57:48 UTC 2010 i686 GNU/Linux
[code]...
View 9 Replies
View Related
Mar 10, 2011
I am having this strange issue in 10.04. Some USB items work fine while others are not being seen or loading at all. I am using a 24 port powered usb hub. Items that work are:
keyboard
mouse
2nd gen iPod Shuffle
Sony MP3 player
Amazon Kindle 3
do not work:
iPod Classic
B&N Nook
I do not get it, what is going on?
View 6 Replies
View Related
Apr 5, 2011
I wanted to get 10.10. I download it and install it and it tells me to restart like normal. But, when i restart, and select the ubuntu option, it gives me a countdown that says "Completing Ubuntu installation". Then, nothing happens... just a blinking white line.
View 1 Replies
View Related
Jun 7, 2011
I have been using Ubuntu for about a month now. I have the latest version, 11.04. Today, I was watching and downloading movies on Miro and while I was watching, the screen froze and I couldn't get it back to normal. I manually shut down the computer and when I turned it back on it brought me to a page that reads code...
I do not know what to do from here or what the problem is, I was thinking maybe one of the movies I downloaded caused the problem because it happened right when I was downloading. Any help is appreciated, I really want to have my computer working again.
View 6 Replies
View Related
Jan 16, 2010
i can't navigate through the tabs in firefox with my mouse, i cant use the address bar to navigate anywhere by key or click, my google search toolbar is acting the same way. i just updated everything after putting in the flashplugin-installer code.. i'm clueless since i know zilch about this system and im still stumbling through baby steps.
View 1 Replies
View Related
Feb 3, 2010
Being tired of my FAT32 partitions on my 80GB Classic, I had it reformatted on a Macintosh to HFS+ (Mac-formatted) at the Apple Store. As per the abundance of threads online, I also had them disable journaling through the Mac's Disk Utility and it appeared it was ready for Ubuntu. I added the UUID to fstab to allow write privileges. Due to the issues I heard with getting it to mount in Banshee on 64-bit Karmic Koala, I used the killall -9 nautilus command and successfully got Banshee to read and mount the iPod. After syncing my iPod, I verified that the content successfully transferred as the disk was now showing a large portion of the drive in use (presumably from the new media). After disconnecting my iPod, from both Banshee and from Nautilus, the iPod presumably safely unmounts and disconnects giving me the okay to unplug it. Whether I unplug it or not, after the OK to Disconnect progress bar completes, the iPod freezes (showing the silver Apple logo). After a while, it seems to turn itself back on, but doesn't show any media on the device. In fact, when I select 'About', it shows 0GB used and 0GB free (strange!).
I've been to the Apple Store about three times to have them reformat it and start over as I keep thinking I'm doing something wrong along the way. The data seems to be ON the iPod as I can play it back through Banshee (and on GTKpod), but the iPod menu itself doesn't seem to recognize anything and I can't access the music through the iPod. I think the iPod database may be corrupted, but I don't understand why this is not corrected with a full restore and why I seem to be able to access the music through Ubuntu.
(P.s. I do NOT want to have to go back to a Windows-formatted, FAT32, iPod.)
(P.p.s. I changed the permissions to my user rather than the 99 or something it was before. Also, whenever I load the iPod in Banshee, it shows all the songs on the iPod.)
View 1 Replies
View Related
Feb 7, 2010
I started another thread on this (URl...), but the topic was not specific to what I now know the problem to be. So Ive started a more appropriately titled thread.In my local network I SSH (via Putty) to my Ubuntu 9.1 server and the tunnel a VNC connection through to it. No problems at all. I forward port 5900 through SSH to do this. My local servers have port 5900 blocked, so I know it is tunnelling correctly without trying to access port 5900. I cannot VNC directly to port 5900, as I would expect. Everything works just as expected.
When I SSH external to my router a I use a virtual server connection through port 22. This works just fine.I then start a VNC session, in the exact same way as I do localy, tunnelled through port 5900. Specifically I tunnel port 5900 to my.router.public.ip port 5900. However when I start up VNC it times out. The reason is that my firewall blocks a request to my routers public IP address from port 5900 on the server running SSH as follows :I have tried this both with the Ubuntu built in desktop and with x11vnc. Both give identical results. When I start x11vnc I tell it to listen on port 5900. This, as explained above, wokrs just fine in my internal network and does NOT put out any requests on port 5900.
View 3 Replies
View Related
Mar 1, 2010
I'm having trouble setting up dual monitors on my HP Pavilion dv7-1020us laptop, with an Nvidia 9600M GT graphics card, and Ubuntu 9.10. I installed Ubuntu via Wubi, on top of Windows 7. I tried this before on the same laptop when I was using Vista and Wubi, and Ubuntu was able to recognize my Graphics card, and install a proprietary driver. I wasn't able to test dual monitors, though. However, now that I'm using W7 and Ubuntu, it cannot use a dual-monitors correctly. It recognizes the monitor, but it only displays a mirror display of my Laptop monitor, not acting as a separate monitor, like I want it to. I tried messing around with the settings in the display menu, but nothing works. I tried downloading linux drivers for my card from Nvidia's site, but the file is in a .run extension, which I don't know how to install. What should I do to get this working?
View 7 Replies
View Related
Mar 8, 2010
Can anyone run me through the process to install lftp correctly with all the correct support for SSL and SSH connections?
I am using the newest version of Ubuntu.
View 4 Replies
View Related
Mar 12, 2010
I finally bought a second hard drive to back up all my files since I'm planning on wiping my hard drive completely clean and reinstalling Windows and Ubuntu once Lucid comes out. I'm just wondering, how common is it for files to become corrupt when transferring from one hard drive to another? I ask this because I usually have trouble when transferring (usually large files) onto my flash drive. I know that actual hard drives are different but I just want to make sure. Also, is there a way I can confirm that everything transferred correctly? Most of my files are music so it would be a pain to check every single one to see if it works.
View 6 Replies
View Related
