I'm having trouble setting up dual monitors on my HP Pavilion dv7-1020us laptop, with an Nvidia 9600M GT graphics card, and Ubuntu 9.10. I installed Ubuntu via Wubi, on top of Windows 7. I tried this before on the same laptop when I was using Vista and Wubi, and Ubuntu was able to recognize my Graphics card, and install a proprietary driver. I wasn't able to test dual monitors, though. However, now that I'm using W7 and Ubuntu, it cannot use a dual-monitors correctly. It recognizes the monitor, but it only displays a mirror display of my Laptop monitor, not acting as a separate monitor, like I want it to. I tried messing around with the settings in the display menu, but nothing works. I tried downloading linux drivers for my card from Nvidia's site, but the file is in a .run extension, which I don't know how to install. What should I do to get this working?
I had a working 10.04 installation and everything was good, then i compiled my own kernel and screwed things up. So I reinstalled and installed my graphics drivers. But Ubuntu can't seem to get my correct resolution. So I am stuck at 1360x768.
I want to be able to login on different users on my two screens. Is that possible? It would be nice if I could have the left screen and my gf could have the right. I'm using ubuntu 10.04 with gnome, and I have a Nvidia graphics card.
I have a Dell inspiron 1525 laptop with a 1280x800 display and an external 1280x1024 monitor. I'm using 9.04 with openbox. I've done a loooot of online reading about how to get a dual monitor setup using xrandr, and I really don't know what I'm missing here. So here's the deal: I want to have my external monitor on the left of the laptop's display, and of course I want each of them to display different parts of the desktop.
First I set up the right resolution to each one of them (I do it using lxrandr). Typing xrandr -q in a terminal, I get the following:
I have an asus p5kpl-cm MB. I plugged in a radeon 9200 pci card. In the bios, I can set up:
pci/igd igd/pci igd
This determines which of the 2 displays (pci card or internal graphics on the MB) is the boot display. That determines which comes up with the bios screen and then once booted into ubuntu (10.04), this is the only adapter/monitor seen. The button detect monitors doesn't do anything.
lspci sees both my internal and pci card graphics. So, I can get either to work just fine (auto detected etc.) just not both at the same time.
I've tried all of the 3 above settings, and even when I set it to just igd, lspci still sees both my adapters. It identifies them correctly, and it works perfectly, detecting the monitor and knows the resolutions for each - just not both at the same time.
Does ubuntu know how to automatically configure more than one display w/o doing something else, or must I do something else to get both going together?
I have a ATI VisionTek 9250 128mb DMS59 PCI video card that I would like to use for dual monitors on Ubuntu 10.04 Gnome. I installed the card and booted the live cd. Both monitors are recognized when I go to the display settings, but when I un-check the mirror box, nothing changes. I am still only getting one monitor. I was previously using 9.10 and it sometimes worked, but not always.
I have a brand new installation of Ubuntu 10.10. I'm using a GeForce 8600GT graphics chipset. I have two monitors, and my goal here is to have them both working under Ubuntu in their full resolutions, and I've not had any luck with this yet. I've got a Viewsonic VE155s with a native resolution of 1024x768, and a Chimei CMV 221D with a native resolution of 1680x1050. When I first installed Ubuntu, both monitors were working, and the VE155s was working in its native resolution of 1024x768, but the CMV221D was stuck in 640x480.
The Nvidia video configuration utility was not identifying the latter monitor - it only reported it as DFP-0, and doesn't allow any resolution above 640x480 to be set. The mechanism (which has a name which I don't recall) which allows the OS to interrogate the monitor's firmware to find out the monitor manufacturer, model and accepted resolutions and frequencies to use does not seem to have worked. (I previously had the Nvidia driver installed, but I've since switched back to the default open source vesa driver. I won't use the closed Nvidia driver if I don't need to, but if I need to use it to get acceptable performance from this hardware than I will.)
So I did a little bit of reading and I did some hacking of xorg.conf. Previously I had the 15" monitor working in 1024x768 and the 22" monitor working in 640x480. Now I've got the 22" monitor working in 1680x1050 as desired, and the 15" monitor not working at all. Here's a copy of my xorg.conf. For the sake of brevity I have not included the unnecessary bits such as input devices.
I'm trying to set up my monitor and tv for dual display but I'm having some problems. I want them to display the same thing so I've enabled twinview and I figured the second display position should be set as clone but when I save xorg and restart the x server the position reverts to absolute. Anyway, the monitor is set as the primary display and it's the one I'm having problems with. The tv is fine but the monitor's display is stretched off the screen so I can't see the far right or bottom of the screen. I'm very new to linux and I'm just finding my feet so if there's any other info needed you'll probably have to be very specific.
The problem is that I don't have NVIDIA graphics card These are my HP ProBook 4510s Laptop's specification: [URL] And I think my built-in graphics card is Mobile Intel� 4500MHD Did anyone Dual Monitor with this Laptop or knows how to Dual Monitor with it?
I have a thinkpad T43 with a dock and a 19" Dell monitor attached. Im trying to get an extended desktop.Using the default display program (using ubuntu 9.10) I can mirror the screens just fine. But, when I click the radio button to enable the extended desktop, the monitors (both of them) go black. Some times it doesn't come out of this. (yes, I'm waiting more than 25 seconds) What can I do to make the extended desktop work? here is my display info from the command lshw:
I want my video card to stop processing an image to my integrated monitor and only process images to my external monitor.
My problem is that I use my Toshiba Satellite M65 (which is a laptop) as a desktop: I use an external monitor, external keyboard, and of course an external mouse. I only recently started using Ubuntu after many years of Windows XP and I just realized that both my laptop's integrated monitor and my external monitor are 'on', displaying the same image. I want my video card to stop processing an image to my integrated monitor.
I've been searching around and from what I've found this is supposed to just work but I am having some display issues when cloning my laptop to an external monitor. I think the problem is that my laptop has a better resolution than the monitor. Here is my setup:
laptop with a display of 1900x1200 external monitor with a display of 1680x1050
ideally I want to clone the laptops output onto the external monitor so they can both operate in their native resolution. When I setup twinview and set it to clone the laptop displays correctly, however, the external monitor is missing a large chunk on the bottom and right hand side
here's my xorg.conf
Code: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0
Does anyone know of problems where 10.10 doesn't recognise more than one monitor? I've got nVidia 8500GT and I have the 'recommended' proprietary driver installed. I upgraded from 10.04, and dual monitor was working -> restarted -> dual monitor not working.
I'm currently running Ubuntu 10.10 on my HP laptop with an external monitor attached. I've been having the same issue since 9.04 and just now figured I should ask about it.When I have dual monitors set up (extended desktop) the mouse speed in the X direction seems to double. ie. assume the mouse usually moves 1 pixel at a time, it now moves 2. It seems to be functioning as usual in the Y direction, which makes the motion really weird and hard to use. I'm using a Wacom tablet for the mouse, but the same happens with my laptops touch pad. Anyone else experience this/know how to fix it?
I have a dual setup and just switched from Xubuntus Xfce? to Fluxbox... But now I can't set wallpapers on both my screens anymore. How do I do that? I had to change the Fluxbox menu from Head 1 to Head 2 to get it on my bigger, primary screen. Which is the one getting a wallpaper when I'm setting one.
So, for work purposes i decided to plug my old lcd monitor into my laptop so that I could have my writing on one screen and my info on the other. So i plugged it in and opened up monitor which automatically configured it. Only problem is that now on my laptop screen theres big blank spots on the bottom and on the left. No window will appear there but for some reason docky will.
I just built a system with an Nvidia GT240 and Ubuntu 10.10. I have two monitors and am trying to get them set up. I currently have them working fine in twin view but I'd like to have set up as separate X screens. However, whenever I do that X crashes. I've got the latest drivers set up from the x-sane PPA so I'm not sure what more I can do. My driver version is 270.29.
I just upgraded to 11.04 from 10.10 (which I had to reinstall after upgrading to 11.04 beta and attempting to install gnome 3 but I digress) and now my monitors are permanantly stuck on clone.When I go into monitor preferences and uncheck same image in all monitors I get a popup error
"The selected configuration for displays could not be appliedrequested position/size for CTRC 148 is outside the allowed limit : position=(1680,0), size=(1680,1050) maximum=(1920,1920)"
What I want to do is set one monitor to 1680x1050 and the other to 1920x1080 but basically it is telling me it needs a resolution higher than this seemingly arbitrary number...in my past adventures with this I was able to change some Xorg.conf file to increase this maximum but I think that was 10.10 and now I cannot find a file that has that setting in it.
I have dual monitors (both 1600x1200) and X is set to span them. I prefer to set my Eclipse window to 3200x1100. However, when I use VNC to connect to my desktop, I'd have to pan around a lot, so I use wmctrl via a script to resize Eclipse (and Chrome, etc.) to better fit my smaller VNC viewport.
When I return to my dual-monitor desktop, I want to resize/move my windows again. But wmctrl does not work correctly. If I do
(from a script), then instead of putting the window at 0,0 and width 3200, the window appears on the second monitor (i.e. at 1600,0) with width 1600. So I must manually resize it which is more difficult.
Am I using wmctrl correctly? Is it not wmctrl's problem but my window manager? I'm using compiz in Ubuntu 10.10.
I am using Ubuntu 11.04 - the Natty Narwhal 64-bit and I am using the Nvidia Xserver version 173.14.30 and it never has any problems when I am in single monitor mode but when I turn on twinview mode like this----
and click apply the new monitor first shows up black and when I move my mouse over the monitor stuff starts showing up and I am able to click ok to keep my settings when I click ok the screens freeze. everything else works; I can move the mouse around and if I am playing music it still plays but if I click on any button nothing happens and nothing happens when I use the keyboard either. I would really like to be able to use both my monitors
I've got a dual monitor setup. The primary one is 1360*768 and the other is 1024*768. When I fullscreen a video on the web [URL] it fullscreens to the smaller (non-primary) monitor, but cuts some off the right hand side, as if it is fullscreening the right size to display on the bigger monitor, but instead does it on the smaller one. It happens with any web video, if I click the fullscreen button on the player, it moves it fullscreen to the other monitor.
Just installed a clean version of 10.04 onto my Sony VAIO with an ATI Radeon Mobility x700 video card.Whilst using 9.10 KK I was getting low resolution but the dual monitors worked totally fine.Which I use to connect to my TV via a RGB/PC Cord.Since upgrading to 10.04 the resolution is awesome BUT when I merge both monitors the laptop goes mental and shows a white/whitish screen.If I use have both monitors side by side its OK but then I cant run xbmc to show movies. I'm stuck with making the TV my main monitor, which is a pain.Why is the laptop going white after merging screens? Does anybody have any ideas?
I have dual monitors that I have set up with two separate X screens with the nVidia control panel. For some reason at times when I move my mouse between the two screens, the cursor will start flickering rapidly between the adjacent edges of the screens and the system will become completely unresponsive, forcing me to do a hard reboot (the keyboard doesn't have a SysRq key).
Anyone want to take the time to help me get my ATI x16XX to work with dual monitors?I'm really tired and frustrated after upgrading to lucid and having the "vendor" drivers stop working.I can get a screen up, but cannot get the free driver to recognize the fact that I have two monitors.I tried renaming my xorg.conf and rebooting, but that caused my system to stop at startup.
I have been using ubuntu for a year or so with little trouble until now. I have done a fresh install of 10.10 and my second monitor doesnt work. I have Intel G31 graphics. It was working fine with 10.4 and previously 9.4, it displays the bios splash screen and then nothing. System>preferences>monitors does not show it as present at all. Here is my lshw -C video:
So the first couple of days using Unity with my dual monitors went fine. Today I plugged in my laptop to the second monitor, and while the top bar and the side menu are being displayed, all the desktop icons, background, and actual program windows are black. Basically I just have the menu bar and the launcher. The windows are still there when I unplug the second monitor.
fresh install of 11.04 on a built system (frankenstein leftovers), 2.something ghz, 1gb ram, a host of drives, and a 64mb nvidia mx440 with svideo out. Boots up, looks pretty, something about unity not finding 3d graphics (fine, i don't really want it, just more fancy gui crap to suck cpu cycles) and runs fairly well. so I think, cool, svideo out, old 52" rear projection....HTPCish. "Lemme get this thing hooked up to the tv, what a great idea" So, I start looking around and find all kinds of wrong posts about not Natty, and not my video card, and I try this n that,and it doesn't work. I'm all about reading the forums, but I can't find the right info for my sitiation, and I'm overwhelmed/irritated.
Long story short, I added some repository ppg something, and then dl'd and installed the "nvidia-current" driver. After a reboot, I fire up the nvidia gui, and it tells me I have no xorg.conf and to run a particular command in terminal to make one. So I did it. and after another reboot, my system just hangs at "ubuntu" with the four (five?) dots. Reboot, recovery, something something something, safe graphics, backup your xorg.conf? yes. reboot and all is ok now. still no nvidia support. Now I'm reading the internet machine about the xorg.conf being old school, and how I have to make a monitor.conf file with config settings. only problem is it tells me to go to x11/xorg.conf.d/whatever. I have no xorg.conf.d directory. So what's the deal? How in the hell do I get the nvidia driver installed (I think I got that), configured (I have no clue), and running (yeah, I just saw a flying pig)?