I am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
i am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
Can a Ubuntu (or any other distro) wake up from standby/hibernate at a preset time?
I actually don't want the PC to consume 200W all the time for just doing something every hour.
I just bought a Logitech V470 bluetooth mouse. It's no problem to let it work under Koala 9.10 (gnome), but after shutdown/standby/sleep, it doesn't work anymore. With my USB mouse, I have to click the bluetooth icon and select 'switch off bluetooth'. After that, I click 'switch on bluetooth' and bluetooth works again. I thought switching on and off bluetooth with the applet is the same as 'sudo /etc/init.d/bluetooth start/stop', but it isn't! The previous command greyes out/in the bluetooth icon, but it doesn't resume my bluetooth. If 'sudo /etc/init.d/bluetooth restart' would work, I would be able to add this line into /etc/pm/sleep.d, so it's automatically loaded on resume.
View 6 Replies View RelatedI am looking for a tool in fedora which can hibernate/standby and also resume after a few seconds automatically with a command. If we have that option by default in fedora.
View 1 Replies View RelatedI've recently put a new machine together:
Gigabyte GA-B85N Motherboard with Intel HD4600 Graphics / Intel Core i5 4440 CPU
OS: Debian GNU/Linux 7 (wheezy) / Linux msc001 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 GNU/Linux
I've installed KDE and when I go standby everything seems ok, but when I resume the monitor does not respond (the power indicator is flashing so there is no signal being presented thru the HDMI cable). Note that the system is still running as I can Alt-F2 (quick task/find), select Terminal and enter sudo-reboot without the screen. So it is just the hdmi signal that is not being recreated/refreshed properly.
I've included the suspend log (/var/log/pm-suspend.log):
Code: Select allInitial commandline parameters:
Sat Oct 4 13:22:54 BST 2014: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:
/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
[Code] .....
Running Opensuse 11.1 on an HP laptop. When I resume from hibernation or standby, I usually have to wait for about a minute for the wireless card to find my router. Is there any way to speed up this time to connect process ?
Interestingly when I boot from cold, the wireless connection is most times ready to go as soon as the boot has finished. So just wondering how I can make things quicker for resume from standby or hibernation
Running Ubuntu 10.04 on a dual-boot Windows 7 laptop.
On "suspend," the wireless card appears to close connections correctly. Then, >15 minutes later, the laptop's wifi LED lights up and the laptop generates heat.
The computer should be on standby, but instead it's waking itself up and running down the battery.
Are there any programs that might be failing to suspend for sleep? Are there any settings to prevent the wifi card from waking the computer?
I only noticed this because the laptop was getting hot and the battery was wearing down.
I used the following command to put my backup hdd into standby:
Code:
# hdparm -y /dev/sdb1
/dev/sdb1:
issuing standby command
check the status:
[Code]....
It does this every time. What would cause the disk to spin up when it's not even in use?
Ever since I upgraded to Ubuntu 10.10, my laptop won't go into standby. The screen goes black, but then refreshes with the login screen.
View 1 Replies View RelatedThis happens on Ubuntu 9.04, 10.04 and Mint 8 "Helena".
The computer: Aser Aspire One D150 with 2gb of RAM, Ubuntu/Mint (depends on the day) booting from a SDHC card.
Problem: When I unplug the computer to move it or plug it in it will go immediately into standby. I go to wake it up, it runs for a few seconds and goes back into standby. After that, it is fine until I unplug it or plug it in again.
This is probably really a quick fix but I cannot seem to find it. When I close my laptop lid it brings me to the standby screen which then asks me to put my password in, when i log in I managed to make it not ask me for a password but on the standby screen it still does.
It's just annoying me a little and wouldnt mind just being able to open my laptop and go. also same kinda problem with installing software, always asking for passwords but I guess i can live with that one.
I have a Toshiba Satellite laptop, dual-boot with Win7 and Ubuntu 10.10. Everything works as it should in Ubuntu, except when I resume from standby the computer goes into a "kernel panic," the screen freezes and caps lock light blinks.
I travel with my laptop and use standby all the time being a student, so I've been forced to use Windows 7 because it's far more reliable (isn't that funny >_<) when I resume from standby..
After literally searching for DAYS, no solutions have worked for me, and apparently this is a pretty big issue. I would love to get Ubuntu running full-time on my laptop. Also, my display drivers aren't officially supported by Ubuntu, but I'm not sure if that has anything to do with it.
I have Xubuntu with XFCE Desktop installed. I have disabled all screensaver and power save options, but Monitor still goes into black standby mode. Howto prevent this?
View 9 Replies View RelatedI just switched back to Ubuntu since I got my SSD and Ubuntu feels now very nice..
I just was confronted with one problem. At my Home PC I was working normally using FileZilla and drag and dropped something from FTP to local machine, then suddently my PC locked and the Screensaver appeard. I mean this Matrix Saver is nice but not when you want to work
Then first I thought it simply locked the workspace and tried to login, but it did not accept any key input, then it just went to standby after some sec..
I really wonder how that can happen, I had deactivated automatic standby in the energy settings, because I don't use it.
To activate multitouch on my N150 netbook I have to execute the following script:
Code:
synclient VertTwoFingerScroll=1
synclient HorizTwoFingerScroll=1
[code]....
When the computer is in standby i press the power button and it whirrs into life but the screen stays blank and the power light stays orange.
Only way to sort it is to turn it off then on again.
Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.
I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.
It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.
I'm using Karmic since November and standby/sleep has always worked fine. Some weeks ago, it stopped working fine.
After a reboot, I can put the system in standby only once. If I try standby after that, the system seems to do a normal standby, but it resumes at the moment the fans would normally stop working.
I tried different things like the s2ram program, pmi action sleep, etc. I went to the BIOS and tried a number of things, one was succesfull: disable USB. When USB is disabled I can go into standby every time. When I enable USB again (even with no devices connected), standby only works once again.
So, how can I disable USB at the moment I go into standby?
I installed ubuntu 10.04 32bit on my t60 (T2400(1.83GHz), 1GB RAM, 60GB 5400rpm HD, 14.1in 1400x1050 LCD, 64MB ATI Radeon X1300, CDRW/DVD, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, UltraNav, Secure chip, 6c Li-Ion batt).
If i set the computer to standby, i loose mice cursor. It is there (i see it goes to dock or menu), but it is invisible.
Is there any way to make it so I can let my laptop go into standby that is connected to my printer and make it so that I can still see the printer from my other systems. Then if I print something it brings the networked printer/laptop out of standby and prints my job. I just ran a test and when my system went into standby the printer went "offline" and I couldn't print from it. I don't want to be forced to leave my computer fully on 24/7 to have a networked printer.
View 4 Replies View Relatedi am running 9.10 on a compaq 2209cl laptop. has been working great with no issues till i updated the other day. when i come out of standby (opening laptop lid, or hit the power button to wake up) my network connection does not start, and there is no wireless networks displayed. a reboot usually takes care of this prob until it goes into standby again. just wanna know if there is a way i can solve this myself or if i gotta wait for a patch? it aint too bad but is sure is annoying when i get on and off this thing all the time.
View 9 Replies View RelatedI am running Ubuntu 9.10 on a PC. When the computer is on standby and I want to fire it up again, Ubuntu demands a password. Since the computer is inside a private house, and I never put it on standby unless I am at home, entering a password is an unnecessary nuisance. Is there some way to turn this feature off?
View 3 Replies View RelatedPlenty of people seem to be having issues with the nvidia graphics drivers, so I thought I'd add my woes to the heap. My issue is that I run two screens under twinview, but the second one doesn't work for some reason. More specifically, the Nvidia-settings tool is able to detect my second monitor, and I'm able to assign it a resolution and position and the like, and my desktop seems to extend over to where the second monitor is, but the monitor just remains in standby mode.
This happened with the drivers proprietary drivers that Nvidia tried to install (version 173 I believe) so I removed them and tried to install the 195 drivers manually, which I eventually figured out how to do (by blacklisting the nouveau module amongst other things). This still didn't fix things, and gave me the same issue.
(As an aside, where can I find the nvidia-glx-195 and nvidia-modaliases-195 packages, as they seem to have disappeared from the LP-PPA-nvidia-vdpau repository where they apparently used to be?)
The strange part though, is that my second screen works fine if I don't install any nvidia drivers, and just use the System->Preferences->Monitors applet. The second screen comes out of standby and works nicely.
One other little thing I've noticed that may have something to do with it, is that if I switch the outputs that the monitors are connected to, the other monitor will work. The output whose monitor doesn't work is always the one that has the DVI->VGA converter. Could this have something to do with it?
When I put my laptop to sleep (clamshell close) it goes to sleep and is a happy laptop.
When I open the laptop, I can hear the thing going and waking up. However the screen stays off. Brightness keys do nothing. (however they did nothing in the first place as I'm using the NVIDIA driver). I have to do a hard reset to fix things.
The strange thing about this is Sleeping / Waking up has never been an issue till about today.
I'm new to ubuntu and using 9.10. I have installed a dlink wua 2340 wireless adaptor and it is working properly. But after waking up computer by standby mode, wireless connection breaks and the wireless device is not mounted. Therefore I always have to shut down the computer and restart again to establish wireless connection.
View 1 Replies View Relatedfor some reason after I standby, my sound doesn't work as it should. It skips and sometimes repeats and then catches up to where it's supposed to be. I think video does this too
View 1 Replies View RelatedI don't know how to stop this monitor standby thing. When I'm not using the computer, the screensaver will start after a few minutes, what I want. But after a few minutes then, it'll go black. How can I stop this from happening?
View 12 Replies View RelatedI have a home-fileserver with 6 desktop harddisks in a md-raid.
The server isn't accessed a lot, so I think it would be good for the harddrives to go in standby-mode after some idle time (e.g. with the hdparm -S or hd-idle command).
Is this safe when using mdadm or could this cause errors/degraded harddisks?
Ever since I have been using Mepis 8 my monitor keeps defaulting to standby mode unless I keep using the mouse. I have tried all the usual things within KDE but with no success. Quite often I watch a dvd film on my PC and it is most annoying when the monitor switches off during a film. Is there an option within xorg.conf to stop this from occurring? My monitor is an LCD Benq FP91G+.
View 2 Replies View Related