I am looking for a tool in fedora which can hibernate/standby and also resume after a few seconds automatically with a command. If we have that option by default in fedora.
View 1 RepliesCan a Ubuntu (or any other distro) wake up from standby/hibernate at a preset time?
I actually don't want the PC to consume 200W all the time for just doing something every hour.
i am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
I am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
I just bought a Logitech V470 bluetooth mouse. It's no problem to let it work under Koala 9.10 (gnome), but after shutdown/standby/sleep, it doesn't work anymore. With my USB mouse, I have to click the bluetooth icon and select 'switch off bluetooth'. After that, I click 'switch on bluetooth' and bluetooth works again. I thought switching on and off bluetooth with the applet is the same as 'sudo /etc/init.d/bluetooth start/stop', but it isn't! The previous command greyes out/in the bluetooth icon, but it doesn't resume my bluetooth. If 'sudo /etc/init.d/bluetooth restart' would work, I would be able to add this line into /etc/pm/sleep.d, so it's automatically loaded on resume.
View 6 Replies View RelatedI am using WICD as my wireless network manager and it works connecting to a network for the first time. But when I resume my laptop from hibernate or standby, WICD will not reconnect to the network and gets stuck on obtaining an IP address. And if I try to change networks without hibernating I get the same problem. Also, I notice that the network name is stagnant. I connect to multiple wifi networks a day because of school. When I leave my "home" network and connect to my "school" network WICD still says "Homebtaining IP address" even thought it should say "schoolbtaining IP address." My thoughts are that it isn't releasing the network properly and when its trying to connect it can't because it still thinks it's connected. The only solution I have found is to restart my laptop every time I want to connect to a new network, or shut down every time I am done using my laptop, which is a major inconvenience.
Here is what I am using:
HP tx2000
Broadcom BCM4322
Ubuntu 10.04
WICD 1.7.0
I'm using CentOS 5.6, kernel version 2.6.18-238.12.1.el5xen, and the Hibernate and Standby options don't even appear in the System menu. How can I get them to appear?
The funny thing is that before I reset my system to a clean install of CentOS 5.6, I was able to see those entries and execute them just fine. (I think that in that previous installation, by doing some updating of packages I got another kernel version and booting into that one showed the menu items.)
Could it have something to do with the fact that it's a xen kernel? Even though I've disabled xend, it doesn't appear.
I've recently put a new machine together:
Gigabyte GA-B85N Motherboard with Intel HD4600 Graphics / Intel Core i5 4440 CPU
OS: Debian GNU/Linux 7 (wheezy) / Linux msc001 3.2.0-4-amd64 #1 SMP Debian 3.2.60-1+deb7u3 x86_64 GNU/Linux
I've installed KDE and when I go standby everything seems ok, but when I resume the monitor does not respond (the power indicator is flashing so there is no signal being presented thru the HDMI cable). Note that the system is still running as I can Alt-F2 (quick task/find), select Terminal and enter sudo-reboot without the screen. So it is just the hdmi signal that is not being recreated/refreshed properly.
I've included the suspend log (/var/log/pm-suspend.log):
Code: Select allInitial commandline parameters:
Sat Oct 4 13:22:54 BST 2014: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend:
/usr/lib/pm-utils/sleep.d/000kernel-change suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
[Code] .....
Running Opensuse 11.1 on an HP laptop. When I resume from hibernation or standby, I usually have to wait for about a minute for the wireless card to find my router. Is there any way to speed up this time to connect process ?
Interestingly when I boot from cold, the wireless connection is most times ready to go as soon as the boot has finished. So just wondering how I can make things quicker for resume from standby or hibernation
My question is simple, is it possible to enable and disable automatic sleep/hibernate/standby using BASH? I need it for a bash script.Been searching for a while now, can't seem to find it.
View 2 Replies View RelatedMy system cannot resume after hibernation. I have done all as described here [URL] ...
My have set up swap file "/swap_debian".
I have 3 partitions: sda1: windows boot partition. sda2: windows 8.1. sda3 : debian
I have the only linux distro installed: debian.
I have read lots of web pages. I have managed to set up suspend 2 disk. After dancing 2 days at the computer the system still cannot resume. I am getting "clearing orphaned inode" msgs while booting, and when booted to ram was not recovered.
Swap file is 4000 MB, RAM is 3860 something MB
My current grub is:
Code: Select all# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.
# For full documentation of the options in this file, see:
# info -f grub -n 'Simple configuration'
[Code] ....
And yes, I did update-grub.
My current /etc/uswsusp.conf is:
Code: Select all# /etc/uswsusp.conf(5) -- Configuration file for s2disk/s2both
resume device = /dev/sda3
compress = y
early writeout = y
image size = 1855258869
RSA key file = /etc/uswsusp.key
shutdown method = platform
resume offset = 31606784
My current /etc/fstab is:
Code: Select all# /etc/fstab: static file system information.
#
# Use 'blkid' to print the universally unique identifier for a
# device; this may be used with UUID= as a more robust way to name devices
# that works even if disks are added and removed. See fstab(5).
[Code] ....
I found this line in dmseg when I was checking out another problem.
"[0.104467] ACPI Warning: Incorrect checksum in table [OEMB] - 03, should be FA 20090521 tbutils-246"
Could this be why I have never been able to resume from hibernate on this machine?
I have ubuntu 10.04 installed on a 50 gb partition on my hard drive I have given a 3.5 gb partition for swap which is > 3gb ram i have. Druing the installation of ubuntu I had specified the swap partition and its hibernate was working fine sometimes before. But I had to delete the swap partition and recreate it because of some reasons so I did that and again created a 3.5 gb partition for swap space usig ubuntu live cd.
But after restart ubuntu no longer detected the swap partition it was ok as its uuid had changed so I specified the swap partition to be mounted automatically by adding an entry in /etc/fstab and then also added the same UUID in /etc/initramfs-tools/conf.d/resume so that it could resume. After restarting ubuntu after adding the entrly in /etc/fstab i got the option of hibernate but after hibernate everything goes well but after hibernate when i start laptop again ubuntu first tries to resume but it does not and without giving any message it shows the login screen.
I'm experiencing very slow resume from hibernation. Last one was nearly 3 minutes. Sure, there is 2GB of RAM to read from disk (no SSD) to memory but that long?What could I check/do?
View 4 Replies View RelatedI'm using stock 32 bit current on a AAO D250 netbook. I'm running into a video issue after upgrade to the recent 2.6.35.7 kernel that doesn't exist after resume from suspend. The condition shows as a broken display that shows a black screen on the left with the KDE desktop partial exposed on the right side. Weird! My only fix so far is to blindly ctrl-alt-f6, login as root and reboot. The screen does not show the console screen during this reboot process
The pm-suspend logs show a clean hibernate and a clean thaw so that's no help. I've checked modprobe.d and don't have any alterations to any of the modules. The video module loaded is the intel_agp which sound right. I'm stumped at the moment.
I just got a Dell Inspiron 1764 and am dual booting it with Win7 and Ubuntu 9.10.Whenever I hibernate or suspend, it goes through everything fine, but then when I resume it just boots to a black screen and I have to do a hard shutdown. Is there a fix for this? I know it's a fairly common issue.
View 1 Replies View RelatedSo I'm having this weird problem where my computer wants to continuously resume a session from hibernate no matter how I shut it down. I think it started when I tried to hibernate my computer with the battery really low. Somehow it messed it up. In any case, it can't resume properly, but gets stuck somewhere in the middle (I think when it's trying to sort out the resume image). Each time I power it on I have to boot it, restart in the middle of the boot so the boot menu comes up as it starts up again, edit commands before boot and add the "noresume" option so it will boot up normally.
View 2 Replies View RelatedI've got a Thinkpad X31 with ATI M6 Ly card. Since Karmic, and Lucid, I get no suspend/hibernate/resume. If/when I select resume or close the lid, Lucid goes through the suspend cycle, and for approximately half a second it actually seems to go into suspend, then the screen comes back on, black, but definitely on, and absolutely no response to any keyboard input - have to hard-shutdown by holding down the power button. I've read that the problem is with the Ubuntu kernel, and that installing/compiling 2.6.33 fixes the issue, but causes other ones.
View 4 Replies View RelatedI am pretty new to Linux, but this can't be the way the system is supposed to operate.
Fedora 12
KDE 4.4
kernel 2.6.32.9-70.fc12.i686
Toshiba satellite L305D
As of updating KDE to 4.4 and a kernel update from two weekends ago hibernate/resume works perfectly. The problem is I feel that all terminals should be locked/logged out automatically upon suspend/hibernate. Through bug reporting at KDE found that an additional setting is required in KDE to lock the desktop before suspend/hibernate. But any of my other terminals that are logged in remain logged in upon resume. Is there an additional setting that I have to flip to secure the terminals? Would this be considered a security hole? Is there anything short of me manually logging out that I can do to automate locking/logging my terminals?
The good news: 11.4 seems to have much better support for my radeon graphics driver which makes many of my workarounds for 11.3 unnecessary
The bad news: whereas previously for 11.2, 11.3 using traditional ifup meant that I could easily restore internet (either wlan0 or eth0) with ifdown/ifup now this seems to have no effect. I haven't investigated further yet since without internet on hibernate or suspend 11.4 is not my grub of choice at the moment
There seem to be quite a few glitches with the 'stable' release of 11.4 but this seems to be the main problem for me. (Minimizing the beta 4 Firefox windows closing them is another...)
After I resume from hibernate with my cpu frequency manually set to the highest settings (2ghz) the network manager shows not wifi APs. "wlan0" shows under both ifconfig and iwconfig but "iwlist wlan0 scan" says no results. "sudo iwlist wlan0 scan" also says no results. I've tried rmmod then modprobe with no luck. Rebooting is the only way I can get WiFi working.
I can get wifi working again by:
- rebooting
- changing the cpu scaling to a lower setting then hibernate/resume
- changing the cpu scaling to a lower setting then 'sudo rmmod ath9k; sudo modprobe ath9k;'
I am using Ubuntu 10.04 with Atheros ar5008 (AR5BXB72) using ath9k drives
Code:
$ lspci |grep Atheros
0e:00.0 Network controller: Atheros Communications Inc. AR5008 Wireless Network Adapter (rev 01)
Code:
$ uname -r
2.6.32-24-generic
I have problem with resuming after hibernate, it is about 50% chance that computer restart when I want resume, then it starts boot normally and all my work is lost.
Acer aspire 3820tg
Ubuntu 11.04
Builtin hibernate on partition
I try uswsusp s2disk ... on resume it always stops in half of process. I used mainly hibernate, but I'm lost now.
i dont know why my system dosnt resume from suspend sstate.i it goes in suspend state.it doesnt resume .i have to poweroff then restart it again.and when i get logged in it gives me Following Error: Resume problem: Your system did not appear to resume correctly from Suspend/Hibernate. This may be a driver problem or a hardware problem. Check the GNOME Power Manager Manual for common problems.
do you think it is because of batterry.i have a problem in my By Battery .IN DOS operating system.when i check my battery icon . A red Cross constantly blink on lower right side of the battery and it says (your Battery consider Replacing).i have notice one thing .And My battery timing hias become Decreased. Do you think this Resume problm is cause of battery problm.Or there is some problm in my Os software.
I am running Squeeze on an older Compaq EVO laptop with radeon graphics.
A few months ago, after an upgrade, suspend and hibernate stopped working. The suspend or hibernate worked fine, but the resume just hung with a black screen. I finally got around to looking into it and found a workaround.
The workaround is to disable Kernel Mode Setting for the radeon. This can be done by adding the boot parameter "radeon.modeset=0" or by editing /etc/modprobe.d/radeon-kms.conf so that it includes the line "options radeon modeset=0".
If you are interested in the details, you can search for problem reports related to radeon kernel mode setting.
Running Ubuntu 10.04 on a dual-boot Windows 7 laptop.
On "suspend," the wireless card appears to close connections correctly. Then, >15 minutes later, the laptop's wifi LED lights up and the laptop generates heat.
The computer should be on standby, but instead it's waking itself up and running down the battery.
Are there any programs that might be failing to suspend for sleep? Are there any settings to prevent the wifi card from waking the computer?
I only noticed this because the laptop was getting hot and the battery was wearing down.
Is there a setting to auto-resume stopped printers? I believe to remember that the CUPS configuration file had an option for setting a time interval to retry and restart printers, but I cannot find it any more, nor something similar in the [URL] dialogues. We have an old ink jet connected by USB to a laptop docking station, which is used by my wife and myself. Currently, we always have to go to the CUPS page after docking and resume the printer manually, whenever we "scheduled" a printing job while being undocked. (Yes, I do have a dedicated box that could also act as a convenient print server, allowing us printing over the local wireless network, but after rearranging our living spaces, I am not allowed to place the printer within an USB-cable's length next to that box. it's complicated.
View 4 Replies View RelatedI'm running Gnome with the bluetooth applet and I have to explicitly use the applet, select the mouse and tell it to connect. It automatically connects just fine when I boot into windows.
I have the same problem with both a Microsoft bluetooth mouse 5000 and a "BLUETOOTH HID v1.02 Mouse [Interlink Bluetooth Mouse]".
I currently have fedora 15 installed along side windows 7 on my acer aspire d250. So far it runs great, however I was wondering if there is a way to make fedora 15 hibernate after being in suspend for a period of time, just like windows 7 does. This make sense to me as there is no point in wasting battery life if i can hibernate, but I don't want to hibernate all the time, just suspend for a period of time, like 2 hours, in case I need my netbook again i have quick access to it.
View 2 Replies View RelatedI have a number of videos I watch where I zoom/change aspect ratios due to the small size. I also want the player to have an auto resume feature, ie, if I stop watching a movie at 30 mins and go to play it tomorrow, it's exactly where I left off. Dragon Player has the resume feature but not the zoom/resize/aspect options. Do you know of a good quality movie player that has both? VLC is preferred but it doesn't auto-resume and the bookmarks are broken.
View 7 Replies View RelatedI have a problem with Cairo-dock not auto-hiding when my laptop wake up from hibernate. Anyone know a quick fix for this? Ubuntu 10.04 Cairo-dock with OpenGL
View 2 Replies View Related