I installed ubuntu 10.04 32bit on my t60 (T2400(1.83GHz), 1GB RAM, 60GB 5400rpm HD, 14.1in 1400x1050 LCD, 64MB ATI Radeon X1300, CDRW/DVD, Intel 802.11abg wireless, Bluetooth/Modem, 1Gb Ethernet, UltraNav, Secure chip, 6c Li-Ion batt).
If i set the computer to standby, i loose mice cursor. It is there (i see it goes to dock or menu), but it is invisible.
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
Running Ubuntu 10.04 on a dual-boot Windows 7 laptop.
On "suspend," the wireless card appears to close connections correctly. Then, >15 minutes later, the laptop's wifi LED lights up and the laptop generates heat.
The computer should be on standby, but instead it's waking itself up and running down the battery.
Are there any programs that might be failing to suspend for sleep? Are there any settings to prevent the wifi card from waking the computer?
I only noticed this because the laptop was getting hot and the battery was wearing down.
when I boot and login to a fresh install of Ubuntu, everything goes fine, the login screen appears, I login. Then the cursor appears on a black screen. This is normal. Then when the desktop should appear, on the very left edge of the screen, about 5 pixels in size, you can see the panel and the rest of the desktop. But I stress, You still see the cursor. In this small area, you can right click as you, even click on the menu and it will come down, you can see it. I can click on Ubuntu SC and the cursor will turn to a loading symbol. But then nothing again. I can press Ctrl + Alt + F2 and terminal will come on fine. So far, this has happened on a live CD of Maverick, A live USB of Maverick, A Natty Narwhal Fresh Install, A Maverick Fresh install, A Karmic Old Install and That same Karmic After going through a Distro upgrade via Ctrl + Alt + F2 to 11.04. I've gotten all the updates for all of them (A slow, bandwidth wasting process), and this doen't happen on other computers, even ones with lower graphics cards then mine. Additionally, on the same computer on a seperate partion, I can load my main Maverick just fine, Indicateing that it can't be a hardware problem. After searching across the internet, I'm at loss to an answer.
View 4 Replies View RelatedSo I upgraded from 10.10 to 11.04 beta 2 two days back. Upon trying to use the system, these were the problems I had:
1. Mouse is absolutely not responsive. Even the cursor is not showing.
2. When I login through keyboard options only once this message flashed "Unity not supported by your hardware switch to classic mode on your next login". It flashed once, took me to the desktop screen where the classic desktop was available and I could not access anything without keyboard shortcuts.
3. When I tried launching firefox, deluge or even tried using the terminal to connect to the net I am unable to connect.
4. My USB devices are not read.
5. I finally tried to do a clean install of 10.10 using the live cd I already have but the OS is not booting from the cd.
As a result I am stuck with a comp which has no mouse, no internet, no usb support, no cd support. Do you guys have any idea how I get it to work again?
I installed some weeks ago Fedora 14 via burnt iso file downloaded from official Fedora site. It was working perfectly like a charm for me until yesterday when I tried to install zend server for PHP.During my first try of installation of zend server it corrupted out my apache server and I lost apache on http://localhost.I removed all "zend-server" like stuff from "Add Remove Software" screen.
Installed again apache 2 in the form of LAMP (Linux Apache Mysql Php)via terminal. Apache installed correctly and started workeing again ok on localhost.n again I tried to install zend server from install.sh file in downloaded zend server installation. It showed me after a while like "zend server installed successfully".I shut down my pc thinking everything is ok now.
Today when I started my system, it shows me boot screen of Fedora, I select fedora and then it shows me baloon filling up for around 5-7 secs. Then all of a sudden a black screen appears up with a cursor blinking at its top left and then nothing else happens further. I cannot find login screen to my desktop anymore.I remember one thing thating reinstallation of apache from terminal, I set following command like "chkconfig --level 235 httpd" (I guess that's what I have written as per some online tutorial for LAMP). Is that cause of mine problem ot its something else?
My mouse cursor has acquired some strange background image showing what looks to be paragraphs of chinese glyphs (they are too small to make out clearly). This background image is contained in rougly a 1 inch square with the mouse cursor hot spot in the upper left-hand corner. The mouse cursor is visible, but whatever is under those glyphs is covered.
I've tried the mouse configuration gui -- but it says nothing of background images for the mouse. I've also deleted and recreated my xconfig.org file to see if that somehow got mangled. I've been searching the web for a couple of hours, but cant seem to find anything related to my problem.
I have a problem with booting from a USB flash drive. I have Acer TimelineX 3820TG. I have Windows 7 Home from Acer and I installed Mandriva OS from USB(from USB because this Acer doen't have a DVD drive). It was OK, but I want reinstall Windows 7 and so I did. Now I have Windows 7 Professional and it wrote over Mandriva's GRUB. It wasn't a big problem. For a while I was just using Windows 7 but now I am thinking that I need some OS with Linux and I am thinking about Ubuntu. But when I tried to boot from USB with Ubuntu I get a black screen with a blinking cursor after the BIOS POST.
I was trying many applications to create a bootable USB drive and many versions of Ubuntu (and other Linux distributions), but nothing worked. I tried to Google for answers but I found many problems where all booting goes to black screen but in my problem Windows 7 boots fine from disc but from USB doesn't work.
I would like to be able to have two sessions, each with their own monitor and each having their own, assigned input devices, all off of one computer. In other words, two people would be able to use two different keyboards/mice and two different monitors simultaneously using two different sessions. Is this possible, or should I look into a terminal server machine?
View 3 Replies View RelatedThere are several items about "multiple mice" but they are ancient based on internet time. I'm currently running Ubuntu 10.04 LTS but will likely update (clean install) soon. I'd like to know how to do this so that my new config plays with multiple pointers.
My laptop has a "track point" (eraser key) pointer built in. At times I connect a Logitech TrackPoint track ball. At other times I connect an external wheel mouse.I would like to preconfigure so that whatever I connect, X11 does the same things and the right things with the respective pointer. I also want X11 to know the details of my pointers so that I don't need to re-configure or tinker with parameters. (Wish List) I'd like to have a separate pointer cursor set for each device (a) just because, and (b) might have value if I'm swapping in real time. (eraser convenient while typing; external for drawing or similar.)
Im running netbook remix on a eeepc 1005ha. It is my only OS and Im loving it except for one obnoxious quirk. It randomly cuts text and randomly pastes it. If there is something in the clipboard, it will usually paste that, but just as often it will cut random text and paste that. The pastes occur when the cursor focus jumps back to the location of the cursor on the screen. I dont know a better way to phrase that, but thats what it is doing. Say... I put the cursor over the word "pastes" in the paragraph above... even though Im typing in this paragraph, the focus will "jump" to the cursors physical locale (the word "pastes") and then paste whatever is in the clipboard. If the cursor is outside of the textbox, the page will jump to the bottom.
This behavior occurs across programs and in any place text can be entered. I can find no rhyme or reason for it... it just... happens. Sometimes even when Im away from my computer, so its not like Im hitting some key on accident. I have loved everything about this ubuntu distro, but this issue is just toany obnoxious. Writing psych papers on this thing is going to be near impossible if I dont get this fixed before I go back to school.
Am running Ubuntu NBR as the sole OS on my Dell Mini 9. Switched over in March to 9.10 NBR. Everything worked fine.Upgraded to 10.04 when it was released. It's awesome EXCEPT for this busy cursor thing.As soon as I log in, all the time my cursor is the spinning wheel of busyness.... It works just as a normal cursor would - my computer also does not seem to be slower due to any operations.If I open an application, the cursor will behave as usual within the window but if I more my cursor to the title bar or switch out of the application, the "busy cursor" resumes.
View 9 Replies View RelatedDoes anyone know of a variant on the Logitech SetPoint software (it allows more functions for Logitech keyboards and mice) for Ubuntu? Would the Windows version work in Wine? I didn't think it would because the app uses Bluetooth, and I don't know if Wine can do that.
View 2 Replies View RelatedI have the problem that I cant configure PinguyOS (Ubuntu 10.10 i386, 2.6.35-23) to handle my two mice using the same pointer, using one mouse with a left- and the other one with a right-handed configuration.
Last system I used was Xubuntu and I was able to set up two mice - both were using the same pointer, but one was left-handed and the other one right-handed. I was very comfortable with that configuration to work with, but now I installed PinguyOS and I'm somehow no longer able to set it up.
Both mice are working just fine, but I can only manage to apply ONE configuration for both ones - meaning both mice are either left OR right-handed. I already searched the preferences / settings in PinguyOS, this and other forums and the software package manager, but I couldnt find anything. Both mice are plugged in via USB and are standard three-button-mice with a scrollwheel and are working properly.
I used the following command to put my backup hdd into standby:
Code:
# hdparm -y /dev/sdb1
/dev/sdb1:
issuing standby command
check the status:
[Code]....
It does this every time. What would cause the disk to spin up when it's not even in use?
i am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
Ever since I upgraded to Ubuntu 10.10, my laptop won't go into standby. The screen goes black, but then refreshes with the login screen.
View 1 Replies View RelatedThis happens on Ubuntu 9.04, 10.04 and Mint 8 "Helena".
The computer: Aser Aspire One D150 with 2gb of RAM, Ubuntu/Mint (depends on the day) booting from a SDHC card.
Problem: When I unplug the computer to move it or plug it in it will go immediately into standby. I go to wake it up, it runs for a few seconds and goes back into standby. After that, it is fine until I unplug it or plug it in again.
This is probably really a quick fix but I cannot seem to find it. When I close my laptop lid it brings me to the standby screen which then asks me to put my password in, when i log in I managed to make it not ask me for a password but on the standby screen it still does.
It's just annoying me a little and wouldnt mind just being able to open my laptop and go. also same kinda problem with installing software, always asking for passwords but I guess i can live with that one.
I have a Toshiba Satellite laptop, dual-boot with Win7 and Ubuntu 10.10. Everything works as it should in Ubuntu, except when I resume from standby the computer goes into a "kernel panic," the screen freezes and caps lock light blinks.
I travel with my laptop and use standby all the time being a student, so I've been forced to use Windows 7 because it's far more reliable (isn't that funny >_<) when I resume from standby..
After literally searching for DAYS, no solutions have worked for me, and apparently this is a pretty big issue. I would love to get Ubuntu running full-time on my laptop. Also, my display drivers aren't officially supported by Ubuntu, but I'm not sure if that has anything to do with it.
I am running Ubuntu 10.10 i386 on my computer
and i put my computer to standby
but when i tried resuming i couldn't
i pressed EVERYTHING on my keyboard and i still couldn't resume so i eventually had to shutdown the computer and start it up again
I have Xubuntu with XFCE Desktop installed. I have disabled all screensaver and power save options, but Monitor still goes into black standby mode. Howto prevent this?
View 9 Replies View RelatedI just switched back to Ubuntu since I got my SSD and Ubuntu feels now very nice..
I just was confronted with one problem. At my Home PC I was working normally using FileZilla and drag and dropped something from FTP to local machine, then suddently my PC locked and the Screensaver appeard. I mean this Matrix Saver is nice but not when you want to work
Then first I thought it simply locked the workspace and tried to login, but it did not accept any key input, then it just went to standby after some sec..
I really wonder how that can happen, I had deactivated automatic standby in the energy settings, because I don't use it.
To activate multitouch on my N150 netbook I have to execute the following script:
Code:
synclient VertTwoFingerScroll=1
synclient HorizTwoFingerScroll=1
[code]....
I would like to know when usb inserted, its showing cant mount when i clicked details its showing bad blocks in beginning , and smething in /dev/sd6. Can i knw why usb drive cant be mounted automatically , even if its set to do so, and to cope the error mentioned above
View 1 Replies View RelatedWhen the computer is in standby i press the power button and it whirrs into life but the screen stays blank and the power light stays orange.
Only way to sort it is to turn it off then on again.
Am currently using 8.10 (xubuntu). The machine's "issue" (I've searched for a reference, but the one I found was a forum thread with no answers) is that when the display is set to go to sleep after 8 minutes of idleness in the power manager, it projects a black screen instead.
I'm not sure what different 'power saving modes' a display/OS usually has, but in Windows, when set to 'go to sleep' the screen goes into standby, i.e something like 'no signal', and from what I've read a lot more power is saved in that mode than by simply showing a black screen.
It was the same when I was running 8.04 with a different graphics card, if that matters. Haven't been able to try a different display. Screensaver and timing and resume normal video out works ok.
I'm using Karmic since November and standby/sleep has always worked fine. Some weeks ago, it stopped working fine.
After a reboot, I can put the system in standby only once. If I try standby after that, the system seems to do a normal standby, but it resumes at the moment the fans would normally stop working.
I tried different things like the s2ram program, pmi action sleep, etc. I went to the BIOS and tried a number of things, one was succesfull: disable USB. When USB is disabled I can go into standby every time. When I enable USB again (even with no devices connected), standby only works once again.
So, how can I disable USB at the moment I go into standby?
Is there any way to make it so I can let my laptop go into standby that is connected to my printer and make it so that I can still see the printer from my other systems. Then if I print something it brings the networked printer/laptop out of standby and prints my job. I just ran a test and when my system went into standby the printer went "offline" and I couldn't print from it. I don't want to be forced to leave my computer fully on 24/7 to have a networked printer.
View 4 Replies View Relatedi am running 9.10 on a compaq 2209cl laptop. has been working great with no issues till i updated the other day. when i come out of standby (opening laptop lid, or hit the power button to wake up) my network connection does not start, and there is no wireless networks displayed. a reboot usually takes care of this prob until it goes into standby again. just wanna know if there is a way i can solve this myself or if i gotta wait for a patch? it aint too bad but is sure is annoying when i get on and off this thing all the time.
View 9 Replies View Related