General :: Resolution In 1 Monitor Suddenly Changed?
Jun 21, 2010
I am using Ubuntu 10.04 and had the dual monitors all set up using NVidia. When I was leaving my office I intended to lock my screen but instead switched to guest user . . . and now 1 of my monitors from my dual monitor set up has bunk resolution?
I have restarted and am logged in as administrator but I have no idea how to fix the resolution? The dual monitors have always been a problem for me. what in the x11/xorg.conf file I need to change?
View 1 Replies
ADVERTISEMENT
Aug 19, 2010
I changed may graphic card, earlier I used NVIDIA FX5500 with nvidia driver, now I was trying to use ATI Radeon 7500, but there are problems with graphic configuration. At first attempt server started but after I changed a screen resolution the monitor went blank. I restarted a computer but after the X server started immediately the monitor wnet blank. I found that for completely for me unknown reasons Xorg was trying to use an NVIDIA glx module with radeon driver. I removed this nvidia driver, I expected ubuntu would be able automatically to set up a proper configuration, but instead of ubuntu complained about a missing driver. I also tried manually to set up some basic config using Xorg -configure but after that the Xorg server was stuck.
View 10 Replies
View Related
Sep 28, 2010
I tried adjusting the resolution in Ubuntu so that it would fit better on my screen. The first one I tried worked ok, but when I tried a higher resolution the screen went black. Now I can't see anything on the screen so I can't change the resolution back to where it was. If I hit esc when booting up, is there anything I can do that will change it back to the default?
View 1 Replies
View Related
Nov 20, 2010
I was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
View 3 Replies
View Related
Jul 3, 2010
How do I monitor which files have been changed after, say, I run the passwd command? (I know, depending on the options used, it changes /etc/shadow and/or /etc/passwd). But I would like to if there is any clever ways of monitoring this. This is how I do it which is a bit crude, and I have to know which directory to monitor. Before running the command, I run
Code:
for i in $(ls -A) do; md5sum $i >> /tmp/before; done
And after running the command, I run
Code:
for i in $(ls -A) do; md5sum $i >> /tmp/after; done
Then I do a diff to see if any file has been changed
Code:
diff /tmp/{before,after}
View 1 Replies
View Related
Dec 6, 2010
Fedora 13 is currently my Linux Distro of choice but I find the Pointer/Activity-monitor is annoying. Usually it has two states ,the solitary round thing or the pointer. Every now and again they are combined into the Ubuntu combination symbol of the two joined into one image. Is there a way to change this image/moving-icon? I like Mandriva's the best and would prefer it worked on all Browser windows so that New Firefox versions did not disable it.Thanks in advance!
The term I needed to find additional info was (Mouse Themes). The (Wait Cursor) is usually included with this.Download the theme you want and go to System> Preferences> Appearance> Customize> Pointers to change to one that is alreadly installed.To install themes, System> Preferences> Appearances> Install. Apparently more than one them can be used on a distro so the Browsers will use its own while Nautilus will use another. Fedora's default one does not funtion properly. It will not change to the pointer if a web page is still loading if you need to sellect something. I learned that Mandriva uses the (Bluecurve) variation for default which is like Ubuntus where it does not have to change between two different images and hense does not lose functionallity.
View 1 Replies
View Related
Feb 22, 2010
I turn on my laptop running 64-bit karmic (if that helps anyone), open GNU Emacs 23.1.1 with the org files I've been working on, and for some reason it is not recognising standard key bindings, for the first time ever, with no reason I can conceive. What does "M-kp-enter is undefined" mean when it seemed well defined not long before? It seems using Esc-enter still works.. can anyone suggest if there are any config files I might need to edit, or what else could have gone wrong?
View 1 Replies
View Related
Apr 15, 2011
Got up to go to work and all of a sudden my settings have changed. My bottom panel for my tabs is gone and instead of my applications on the top they are now on the side. Whats up with this? And what the hell is Ubuntu One?
View 9 Replies
View Related
Oct 15, 2010
I downloaded some software yesterday from the ubuntu rep. This morning my screen has the bottom part of in black there are the KDE docky ,firefox ,terminal & rhythmbox icons ,so is the taskbar..but the wallpaper is cut up ,4cm off. I have noticed that the splash screens res has changed too. It's sharper (smaller). The browser as a consequence is also half lit & having noscript in the bottom without it being visible is a problem. Why has this happened & how can I fix it. The last working config, well that's somewhere else.
View 3 Replies
View Related
Nov 10, 2010
I need to know how to change resolution on the screen and monitor
View 5 Replies
View Related
Jun 11, 2010
About three weeks ago I bought a new PC and installed Debian Squeeze. I have a Samsung SyncMaster 2494hs monitor connected to it. Until about an hour ago the monitor resolution was 1920x1080 and there were no problems. Anytime I clicked on system -> preferences -> monitors, the monitor preferences displayed the monitor name (Samsung whatever) as well as the resolution (1920x1080). An hour ago I did my normal daily upgrade via synaptic (synaptic -> mark all upgrades -> apply). When the upgrade were finished, the system indicated that a restart was required, so I restarted.
After the reboot, my monitor's resolution is set at 1152x864. System -> preferences -> monitors shows the monitor name as unknown and the max resolution available is 1360x768. Xrandr shows the max available resolution as 1360x1360, which is obviously wrong. According to discover I have an ATI graphics card. I've also run ddcprobebut that outputs about 15 lines and then stops with edidfail. I do not have an xorg.conf on my system or, if I do have one, it is not in /etc/X11.
View 11 Replies
View Related
Feb 6, 2011
I'm newbie linux user and I want to ask a question about my laptop display is too big i think its because of my screen resolution, how can I change my monitor resolution?
View 1 Replies
View Related
Feb 9, 2011
Okay, so here is the deal I have been using Ubuntu for awhile as a network monitoring system and have now changed it to being my main system and was wondering why when my machine is hooked up to my HDTV via a VGA port on the back of VIZIO television, I am only getting a max resolution of 800x600? If anyone can help me with this problem it would be awesome.Any additional information needed please include you terminal commands because I am still just so terrible with those.
View 5 Replies
View Related
Jul 25, 2010
I am new to Linux (Ubuntu 10.4 LTS on a Thinkpad T40), now just two days, and had everything working nicely. But since I wanted a better higher resolution I tried to set the monitor resolution to a higher value. After selecting a higher resolution first the screen went black and now it has a white background and is steady but has flickering areas. The system is still working. How can I go back to the resolution that was working?
View 2 Replies
View Related
Mar 2, 2010
On my Acer laptop wit ATI Xpress 1100 I have a native resolution of 1280 x 800, and Linux Mint 8 (of the Ubuntu family) offers that resolution without a problem. However, a few days ago I connected my laptop to my TV, and since then the correct resolution setting has been LOST. It doesn't appear anymore in the Display settings and so I had to choose a lesser resolution - I am now looking at a less sharp screen! How can I delete it? I hope that I don't need to reinstall...
View 2 Replies
View Related
Apr 30, 2010
What should look like X Window System (X.Org) modeline to be put in xorg.conf, for high resolution (incuding recommended 1680x1050 @ 50Hz resolution) for 22" NEC LCD 22WV monitor? X.Org autodetect correctly only 800x600 and lower resolution SVGA modes,unfortunately.1,2
How can I generate proper "Modeline" line for xorg.conf? Is information included in NEC_Datasheet_LCD22WV-english.pdf enough (found on NEC LCD 22WV product info page)? What tools there are available to generate proper modeline for a LCD monitor for Linux? MS Windows (MS Windows XP Home) correctly detects and use 1680x1050 resolution; can I somehow get modeline information from MS Windows?
Footnotes:
1) It might be hardware problem with the monitor itself, as the same LiveCD Linux distribution that couldn't autodetect recommended 1680x1050 mode for NEC LCD 22WV monitor, correctly autodetects recommended 1440x900 mode for slightly smaller NEC LCD 19WV monitor from the same family, by the same producent.
2) Or it might be problem with graphics card (NVIDIA Riva TNT2 M64) not supporting such resolution, or with graphics driver not supporting such resolution.
View 2 Replies
View Related
Jan 25, 2011
I am using Fedora 11 and when the system booted, the screen resolution and font size were increased all of a sudden. Then I configured the screen resolution using
Quote:
system-config-display
to the actual that I had.
But the fonts in gedit are still big. Although the settings shows the default settings that I search on several blogs i.e.
Quote:
Edit -> Preferences -> Fonts & Colors -> Use the system fixed width font (Monospace 10)
View 2 Replies
View Related
Jul 8, 2010
Today I wanted to get rid of ugly GRUB and installed GRUB. I really like it, but there is one annoyance - I used these tips:URL...To have a Splash screen in Ubuntu in full 1680x1050 32-bit, and it worked perfectly. But when I installed BURG in the place of GRUB, I have 640x480 ugly boot splash as I had in the very beginning.Repeating the steps doesn't seem to help. What should I do?I should note that I easily changed BURG's resolution to 1680x1050 using 'R' while in BURG. 640x480 only applies to Splash after I choose Ubuntu.
View 2 Replies
View Related
Oct 26, 2010
I've been using Ubuntu for about two years now, then suddenly today (after my PC accidently lost power) the screen resolution changed to 800x600 (it is, in fact, a widescreen monitor, and this resolution looked 'zoomed in'). The only two resolutions detected with xrandr were in the 4:3 ratio (800x600 and something worse). I followed some instructions, trying to reset the resolution to 1024x576.
I got as far as
$ xrandr --newmode "1024x576" ...
then,
$xrandr --addmode default 1024x576
but when I
$xrandr --output default --mode 1024x576
I a message to the effect of 'your screen can only support 800x600 or less'. Ah-ha, I thought, you stupid machine; this screen has had a greater resolution for over a year.
And so, from System->Preferences->Monitor, I forced the computer to switch to this new resolution. When prompted, I reset.
My current problem is that when I turn the computer on, the monitor displays a floating 'Input Not Supported' sign. I Ctrl+Alt+F1'd, and now all 'xrandr' and 'cvt' commands return:
Can't Open Display
My first priority is to get the computer back to it's less-broken 800x600 state;
EDIT: I'm running Ubuntu 10.04
View 9 Replies
View Related
Apr 1, 2011
A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine. How can I fix this without leaving my house?
View 2 Replies
View Related
Aug 21, 2010
I have a configuration of:
Intel Pentium Dual Core 2.40 Ghz cpu
Intel DG31PR desktop board
2 GB adata DDR2 (800 BUS) ram
NVIDIA Ge-Force 8400 GS NX84GS series PCI express
It's the first time I was installing a linux. First I collected an extra hdd for the installation. I used the entire drive for ubuntu 9.10 installation. It installed without any problem except the special features were turned off. It was said that the special features and animations would start only if their is a sufficient graphics processor. I picked up a solution and from the hardware drivers option, installed the nvidia graphics card. Problem started when i restarted my pc. The resolution automatically changed into 800 X 600 px. I changed it to 1280X1024 (which is highest for my monitor). But when I restarted again, it again became 800X600 px. And it becomes like this everytime I restart.
View 9 Replies
View Related
Apr 1, 2011
so here's the deal. A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine.
View 10 Replies
View Related
Apr 5, 2010
I'm using Redhat 5 with a video card nvdia fx 1500 and a zalman zm-m220 monitor
Has anyone configured a 3D monitor with redhat?
I'm trying to set the resolution to 1680x1020. I edit /etc/X11/xorg.conf and try to manually enter the resolution but after a reboot it goes back to the default.
which is the file i need to edit to manually enter the resolution.
View 4 Replies
View Related
Jan 17, 2010
I just stupidly changed my graphics resolution in System - Preferences - Startup Manager, now i dont get a login window or anything just a black screen. I also disabled the splash but i assume this just gets rid of the ubuntu loading line thingy?
The weird thing is that the resolution was set to 640x800 or something like that in the Startup Manager as default and the laptom im using (an old Toshiba Amilo P4) supports 1024x768. the System - Preferences - Display menu wouldnt let me change any display settings which is why i was messing about here. I havent got any backed up x org file and only a live usb of super os/ubuntu - no cd or floppy drive.
View 8 Replies
View Related
May 2, 2010
I recently installed Ubuntu 10.04, and after I rebooted to finish installing my Nvidia drivers, the bootsplash reset itself to a resolution of 800x600. Is there any way to change it back to 1680x1050?
View 4 Replies
View Related
Jul 11, 2011
my motherboard has ati radeon 3300 hd and when i install it, after restart, my resolution is automatically changed to something big, and my monitor only supports 1024x768 and if something bigger is selected, the monitor goes NO SIGNAL
what am i supposed to do? i have some driver installed by default, i can utilize compiz just fine, play videos on ..... at 1080p just fine, play World of Warcraft almost smooth, i believe that if that driver is installed, it will be even better, but im afraid that if i install it, my resolution will automatically change to something large and my monitor will go NO SIGNAL
View 7 Replies
View Related
Apr 1, 2010
Im running Ubuntu and I recently installed driver for my HD5700 Radeon and been having problems with the display I changed the resolution and now my mouse has disapeared at least I think it was after I changed the resolution. THe thing changing the resolution solved my other problem which was the text was blury or faded. What do I do to fix this how could it just disapear . When I right click the drop down menu does appear but there is no point. I can still open programs up but its seriousy frustrating.
OK so I just went into the terminal and typed compiz it returned: Xgl not present Xset q doesn't revel the location of the log file using fallback /var/log/Xorg.0.log Detected PCI ID for VGA Flags: bus master, VGA palette snoop,66MHZ, medium devsel, latency 64
Checking for texture_from pixmap : not present Trying again with indirect rendering... .. not present aborting and using fallback : usr/bin/metacity
What does this all mean im pretty sure something wrong because I have catalyst up and running and drivers I thought where running correctly.
PS. best instruction to install the HD5700 radeon drivers and catalyst control can be found on the wiki ATI drivers install page for linux
View 2 Replies
View Related
Apr 1, 2011
Ok, so here's the deal. A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine.
How can I fix this without leaving my house?
View 2 Replies
View Related
May 5, 2011
Earlier in natty this was working completely. It's only just started happening about a week ago. I don't know what changed, all I know is it suddenly stopped working. Basically the bar at the top is still there but there is black underneath. I can put windows there but I cannot see them (Just black). If I click on an indicator it looks on the bar as if it is being clicked but I cannot see the menu. I have attached a screenshot.
View 5 Replies
View Related
Nov 2, 2010
(Video card is a nothing special Nvidia)
I want to change the default resolution of 1280x1024 to 1024x768. Setting at boot using the space bar or the KDE display (personal settings) does not survive the next boot. In yast or yast2, hardware, there is no monitor selection (something wrong here?).
Using root, run level 3, the command sax2 --vesa 1024x768 does nothing.
or sax2 -m 0=fbdev does nothing.
I had no problem with previous suse releases. What am I missing?
View 11 Replies
View Related
