Ubuntu / Apple :: 10.10 Installed On PowerBook - Working Flawlessly
Mar 20, 2011
Installed Ubuntu 10.10 on my new-to-me Powerbook 1.67Ghz. PowerPC, as a platform, is most definitely *not* dead. Installation went normal. I installed with network connected to Ethernet rather than Wireless. Installed Wireless firmware. Then I had wireless.
Backlighting didnt work until I added 'i2c-dev' to /etc/modules. Restart, and backlight works, although its a little too sensitive. Hardware acceleration wasn't enabled, so I had to add this to a file called Radeon-kms.conf in /etc/modprobe.d/
"radeon options modeset=0"
Reboot. Then I had hardware acceleration and Compiz.
Install/run sensors and sensors-detect. Run as root. Detected HD temp, CPU, GPU temps and fan speed. Make sure this is in /etc/modules: therm_adt746x. Thats the thermal control stuffs. I then installed openjdk and netbeans and eclipse. OpenJDK is slow, but I feel that is due to OpenJDK itself, and not PowerPC.
This gave me a working CPU ondemand throttling:
apt-get install cpufrequtils
Installing this gave me a working battery-applet that reported a percentage:
sudo add-apt-repository ppa:iaz/battery-status && sudo apt-get update
sudo apt-get install battery-status
/usr/lib/battery-status/battery-status --indicator
I get really good battery life, and everything that shipped on this laptop actually works as designed. Forever PowerPC, Forever Ubuntu
View 1 Replies
ADVERTISEMENT
Jul 17, 2010
I have a Powerbook G4, 550MHz, and I had 10.04 on it, but the wireless wouldn't work. I know that there are tons of variants, but I am sick of wasting disk, time downloading, testing, ect. Has anyone found a really good version of linux that will work? Or am I better off with OS X 10.4?
View 3 Replies
View Related
Apr 30, 2010
Just did a fresh install of Ubuntu 10.04 and I can't enable the Extra Visual Effects. I get the error "Desktop effects could not be enabled".
View 9 Replies
View Related
May 15, 2010
Well currently I am having a problem on the installation, when it goes to step 3 "keyboard layout" and I press forward it just stays there loading and does not proceed. It does not freezes or anything but stays there forever and does no proceed to next step. Burned another live-cd thinking it may be the disk itself but still no luck.
View 3 Replies
View Related
Apr 19, 2011
i installed ubuntu 10.10 on old powerbook g3 (6g hard disk, i think it lombard)m with xfce as desktop (xfce and not xubuntu wich is slower). anyway, everything works fine, but for some reson my vlc just cannot run video file. each time i play him it show a black screen and fall. i tried config his outpot video, and it still dont work, in smoe mode the audio working but the other not.i tried another movie player, and only totem, kaffeine and xine works ok, although very slowly (the video work not smoothly). kaffeine works fine, but not enough. when i had ubuntu 8.04 in the same computer vlc was the movie player i chose and he did his job perfectly.
View 7 Replies
View Related
Mar 15, 2010
I want to use an old Powerbook i have as a music juke box and am thinking of using ubuntu to run it - assume that i will dual boot with a small partition for osx? and then run an external hard drive with flac encoded music - into laptop then usb dac to hifi Will ubuntu run ok on this machine? I have removed all the stuff on the old hDD - anything else i need to do?
View 9 Replies
View Related
May 14, 2010
I'd like to try Ubuntu netbook remix 10.04 on my 12" G4 Powerbook, but I can't seem to find it. Does it just not exist? Apple have a range of older 12" models that are no longer supported that Ubuntu would work great on.
View 4 Replies
View Related
Jun 27, 2010
I am trying to find out how to get the visual effects working on my PowerBook G4. I have 10.04 installed, and it's running an ATI Mobility Radeon 9600 M10. I can't access the xorg.config because it doesn't exist.
View 1 Replies
View Related
May 29, 2011
I have an Apple Powerbook G4 17" Feb'2005 (1.67GHz PPC G4 CPU, 1Gb RAM, 100Gb hdd) at home. Having the infamous "vertical lines" problem, I need to use use an external 1440x900 DVI monitor (same resolution as braindamaged Apple LCD). I also have some USB-serial hardware (weather station, Arduino, etc) and a Nokia N900 configured as a router (this lets me use a fixed IP on the Powerbook).
I had Ubuntu 9.10 running 24h/24 up to yesterday, so I just updated the yaboot.conf in /dev/hda2 (the boot partition) and booted natty off hard disk and USB pendrive (great thing having an yaboot on a bootable partition). Since Apple separated me from 2900 bucks (ouch!!) six years ago, I don't want to abandon this Powerbook until its very end. But it seems Natty is not a viable option...
[code]...
View 3 Replies
View Related
Feb 21, 2010
I just installed Karmic on a PowerBook G4 Titanium. The install went fine after I figured out that I had to set the date in the open firmware because the PRAM battery is dead. Now when I boot, I get a white screen with black text telling me it's found the display then the splash screen shows up but I never get the login screen, just a blank screen. I can switch to the virtual consoles and fool around, but I haven't gotten it to work yet.
Edit: I've attached .xsession-errors (Has UF always required file extensions?)
View 4 Replies
View Related
Mar 17, 2010
I am trying to install on my Powerbook G4 version 9.04. IT went well and I rebooted it boots up and appears to be loading... In fact says "Loading, please wait"
But the screen begins slowly to fade to white until I can't see anything.
There is one error that might be related I noticed "Radeonfb invalid rom contents".
View 2 Replies
View Related
Jan 8, 2010
I've just installed Ubuntu 9.10 on an old PowerBook G4 I have, and when I go to Power Management, it doesn't provide the tab for battery-related settings (nor do I get the little battery/charge icon in the upper-right panel). I'm comparing this to the version of Ubuntu 9.10 I installed on my EeePC netbook, where those things are present. Is there anything I can do to get the Power Management preferences to recognize that the machine has a battery?
If it helps: the PowerBook had Ubuntu installed on it using the 9.10 "alternate" .iso, as I was having trouble burning the "desktop" .iso to a CD.
View 2 Replies
View Related
Feb 12, 2010
I have a Good Way Technologies BU2220 CardBus USB 2.0 card which works fine on this same Mac under OS 9.1. It also works fine on a more modern mac with OS X. But I cannot understand why it's not working in Ubuntu 9.10. I had it recognized (I think??) when I had Kubuntu 5.10 (Breezy Badger) installed on this system. I have an old dog - a PowerBook 3400c 240 Mhz 80MB Ram, with a 40 GB HDD. I have Mac OS 9.1 installed on a 5GB partition, and the rest is Ubuntu 9.10, using the LXDE GUI. I switch between Mac OS and Linux using Boot X.
When I slide in my USB card (making sure I have the external power supply attached to it), the system shows a bit of activity, and my display brightness reverts to default. Then there's no more activity. Of course, USB flash drives and USB mice won't work when plugged in. I navigated to /var/log, and looked in the Messages log. There were the following entries:
Feb 11 13:42:09 PowerBook kernel: [ 374.949456] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
Feb 11 13:42:09 PowerBook kernel: [ 374.949881] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
Feb 11 13:42:09 PowerBook kernel: [ 374.949916] pci 0000:05:00.0: PME# disabled
[code]....
View 9 Replies
View Related
May 23, 2011
I have a Titanium (Onyx) 550 Mhz G4 Powerbook and the standard gnash does not work. I read that you can compile a custom version of gnash for laptops with low spec graphic cards. Could anyone give me guidelines how to do this with gnash? or swfdec? or lightspark?
View 2 Replies
View Related
Nov 13, 2010
I installed Ubuntu 10.10 on my PowerBook G4 (I think that's powerbook 5,6 but I could be mistaken). Most everything is fine from a function standpoint except for the touchpad/trackpad. Unlike most users who seem to be getting an insensitive touchpad, mine seems to be picking up some interference from an unknown source. The mouse frequently jumps around the screen either horizontally back and forth or sometimes vertically. If I disable the trackpad it seems to stop (at least for a few minutes). Sometimes I can lay my palm flat on the trackpad and it will cause the mouse to stand still also which makes the external mouse usable.
Are there any solutions to this? (I did install the, what is it, gpointing-devices package? The one that provides the GUI for touchpad configuration and that has not helped at all, except that I can use it to periodically disable the trackpad for a temporary fix)
View 9 Replies
View Related
Mar 14, 2011
I've had a Apple Powerbook G4 for a while now, but being mostly a Windows user I've never used it. I remember when it ran it's native OSX (Which I can't for the life remember) Probably Tiger? Anyways... I tried installing Ubuntu on it about a year and a half ago, the installation was botched and I left it sitting there with no purpose in life. :O
So I've decided to dust the laptop and give it another go. I've progressed a little further with my Linux experience, having installed and tested a few distros and even switching over to Ubuntu 9.10 for about 4 months. Enough of my life story and more to the point.Has anyone installed Ubuntu, or any distro for that matter on the Apple Powerbook G4? I know there are different versions of the G4 and I'm not entirely sure what my version is, It's the 1.6Ghz version with The Nvidia card (Err I think) and extra Wireless card installed. I am not very capable with Mac - After checking Apples website I believe it's the 15inch.
I've read the FAQ thread and will begin trying to install Ubuntu tonight at home, I just wanted some suggestion and some pointers in the right direction. What distro would be most suitable for my hardware? and What is easiest to set up?
View 1 Replies
View Related
Aug 7, 2010
Anyway, I've a decent understanding of the various Linux console commands and know how to work my way around a text editor or file system. But I can't seem to fix what's wrong with my computer. I'll list my info here and then discuss the most pressing issues that I need help with.
It's a 17" PowerBook G4, with Airport Extreme (which I understand is a headache all on its own: I'll likely get to that later)
Results of ~$ lspci:
I downloaded the most recent .iso for the PowerPC from [url], specifically the 4.4 GB DVD copy.
During installation, I told it to install only the Desktop Environment and Base System. Installation went through without a hitch, though it failed to connect properly to my Wireless card.
The first issue I encounter after booting is during the login. When logging in as a non-root user, I'm told to change my password immediately (root enforced). I've done this every time I've logged in. Immediately after when I log in I'm told that the system clock is wrong: It's currently set to Jan. 1, 1970. If I try to change it, I get a message saying that I can't, and my desktop won't load properly. If I ignore the system clock issue and try to change it in System > Administration > Time and Date later, after entering my admin password I get a message that says
Failed to run time-admin as user root.
Failed to communicate with gksu-helper.
Received:
Changing password for root.
While expecting:
Apparently the password issue is related to the Time and Date settings (according to Google), but I can't fix those because it wants me to change my password.
View 1 Replies
View Related
Mar 24, 2010
I'm trying to use an Apple wireless keyboard with Ubuntu 9.10 (Karmic) but the fn key is not working at all. If I start up xev and hit the fn key it generates no event. What do I need to do for it to work. It seems as if it should work when viewing pages like
[code]...
View 9 Replies
View Related
Jun 8, 2010
I am an avid ubuntu fan, and have been using ubuntu since 8.something. However, I never figured out a way to run WOW from Ubuntu, so I switched to winblows 7. I had my hard drive partitioned with vista, and 7 on it. (it's a long story) I was waiting for my new Ubuntu 10.4 cd to come in the mail, but i grew impatient and installed it on my pc. When I did I was careful not to install it over my Windows 7 partition. Infact, it made a new partition and installed it. So then i had 7, Ubuntu, and vista on my laptop. I formatted the vista partition and now it's blank. My problem is, when i start my computer, Windows 7 is no long an option in my boot menu. WTF happened? and can i get it back? All the files are still there, the partition is still there, from what I understand the whole OS is still there, but it's not on the Boot menu. I'm kind of a noob to ubuntu, I'm familiar with terminal and such. but if something is a bit out of my grasp i'll let you know.if someone could walk me through how to install and play WOW on linux flawlessly, that would work too.
View 8 Replies
View Related
Nov 24, 2009
F12 DVD upgrade from F11 worked flawlessly but, what happened to my Freecell game??
View 2 Replies
View Related
Apr 29, 2010
I'm running Ubuntu 9.0.4 with an Intel PRO/100 VE Network Connection. I have been trying for a couple weeks now different techniques to get my wired ethernet connection working properly. I have a seeming common issue with my e100 driver dropping connection and having hard time picking it back up sometimes. I want to purchase a relatively inexpensive Ethernet card whose generic Linux driver actually operates it CORRECTLY, open up comp and put it in, and update to 9.10. Any list of Ethernet cards that are know to work flawlessly on Ubuntu, or at least tell me which card YOU are using that works perfect without having to write code, install wrapper programs, etc...?
View 8 Replies
View Related
Jan 22, 2010
I installed ubuntu 9.04 but no boot at all (on a powermac G4 cube)
View 1 Replies
View Related
Oct 12, 2010
My live cd worked flawlessly.
After I installed it, is another story I chose to include the suggested .mp3 codec, and to install updates at the same time.
Cmos and hardware all inits fine, then I get several seconds of a cursor, followed by the nice "ubuntu" title with little orange squares under it.
Interestingly, the squares do not cycle until I hold down the power button.
Searching for "10.10 boot" somehow returned zero results. ??
View 4 Replies
View Related
Mar 20, 2010
I followed the reefit manual instructions to install. I tried using the installer package and it seemed to work fine, only when I reboot there is no option which operating system I want to use, and when I go back into OSX reefit isn't there anymore. I also tried the manual install putting it into the system folder on OSX and I get the same problem, it's gone again after I reboot. (Im using the option button to boot into Linux right now, and when I do my Linux partition is called "Windows", I don't know if that matters either.)
Current GPT partition table:
# Start LBA End LBA Type
1 40 409639 EFI System (FAT)
2 409640 360857639 Mac OS X HFS+
[code]....
View 2 Replies
View Related
Jul 7, 2010
I have installed (successfully) Ubuntu 10.04 ppc on my powerpc g4 mac. 400mhz, 1g ram. Its the blue model. It works great, but it does not detect my monitor, and I can not change the settings past 800 X 600. I am using a Dell 19 inch monitor. Analog input (not DVI yet) resolution 12080 x 1024 60hz. I believe I need to change the info in the xconfig file (but I don't know to what or how), and I may not be saying that correctly.
View 9 Replies
View Related
Oct 26, 2010
I have installed several applications on my Powerbook running lucid, but when I click the "applications" menu, many of them do not appear on the list. They show in the software install/remove application.
How can I run the unlisted applications?
View 2 Replies
View Related
Sep 7, 2010
i just got an OptiBay installed in my macbook pro( 5.5) 13". So now i have two SSD on it. an Intel 80gb where OSX is installed and a 60 OCZ drive. How hard/easy will it be to install ubuntu on the 60gb and have like a dual boot. So it will ask me on everyboot to which OS i want to boot.
View 1 Replies
View Related
Mar 7, 2011
Ok so I have a UEFI compatible notebook. I managed to take the natty-desktop-amd64 (the latest Alpha, 3 in this case), throw it on a SD card, and started the grub2 bootloader via UEFI.
Ubuntu installed just fine, the only problem is, there is no selection in my UEFI bootloader for Ubuntu. I can access my newly installed Ubuntu partition only via the "Try Ubuntu Before Installing" option on my SD card. So is there anyway I could create a boot entry?
View 1 Replies
View Related
Aug 22, 2010
which GNU/linux system will work on this? I like ubuntu but I will be happy with anything which works because I have not managed to get a working system myself. My computer is: Mac Pro 1,1 early 2006.
View 6 Replies
View Related
May 6, 2011
Just installed Ubuntu 11.04 on my 21" intel mac. Everything went well except it can not detect my wireless connection. What is the best way to resolve this?
View 9 Replies
View Related
