I am trying to find out how to get the visual effects working on my PowerBook G4. I have 10.04 installed, and it's running an ATI Mobility Radeon 9600 M10. I can't access the xorg.config because it doesn't exist.
View 1 Replies
Just did a fresh install of Ubuntu 10.04 and I can't enable the Extra Visual Effects. I get the error "Desktop effects could not be enabled".
View 9 Replies View RelatedI have a Powerbook G4, 550MHz, and I had 10.04 on it, but the wireless wouldn't work. I know that there are tons of variants, but I am sick of wasting disk, time downloading, testing, ect. Has anyone found a really good version of linux that will work? Or am I better off with OS X 10.4?
View 3 Replies View Relatedim using the ubuntu distro and when i goto the visual effects tab and click on normal or extra, it says "desktop effects could not be enabled" also, i have Two hdd's, a 100GB that has windows 7 and ubuntu. and a 250GB that has Windows XP. GRUB didnt notice windows xp though, so its not a boot option.
View 5 Replies View RelatedWell currently I am having a problem on the installation, when it goes to step 3 "keyboard layout" and I press forward it just stays there loading and does not proceed. It does not freezes or anything but stays there forever and does no proceed to next step. Burned another live-cd thinking it may be the disk itself but still no luck.
View 3 Replies View Relatedi installed ubuntu 10.10 on old powerbook g3 (6g hard disk, i think it lombard)m with xfce as desktop (xfce and not xubuntu wich is slower). anyway, everything works fine, but for some reson my vlc just cannot run video file. each time i play him it show a black screen and fall. i tried config his outpot video, and it still dont work, in smoe mode the audio working but the other not.i tried another movie player, and only totem, kaffeine and xine works ok, although very slowly (the video work not smoothly). kaffeine works fine, but not enough. when i had ubuntu 8.04 in the same computer vlc was the movie player i chose and he did his job perfectly.
View 7 Replies View RelatedI want to use an old Powerbook i have as a music juke box and am thinking of using ubuntu to run it - assume that i will dual boot with a small partition for osx? and then run an external hard drive with flac encoded music - into laptop then usb dac to hifi Will ubuntu run ok on this machine? I have removed all the stuff on the old hDD - anything else i need to do?
View 9 Replies View RelatedI'd like to try Ubuntu netbook remix 10.04 on my 12" G4 Powerbook, but I can't seem to find it. Does it just not exist? Apple have a range of older 12" models that are no longer supported that Ubuntu would work great on.
View 4 Replies View RelatedI have an Apple Powerbook G4 17" Feb'2005 (1.67GHz PPC G4 CPU, 1Gb RAM, 100Gb hdd) at home. Having the infamous "vertical lines" problem, I need to use use an external 1440x900 DVI monitor (same resolution as braindamaged Apple LCD). I also have some USB-serial hardware (weather station, Arduino, etc) and a Nokia N900 configured as a router (this lets me use a fixed IP on the Powerbook).
I had Ubuntu 9.10 running 24h/24 up to yesterday, so I just updated the yaboot.conf in /dev/hda2 (the boot partition) and booted natty off hard disk and USB pendrive (great thing having an yaboot on a bootable partition). Since Apple separated me from 2900 bucks (ouch!!) six years ago, I don't want to abandon this Powerbook until its very end. But it seems Natty is not a viable option...
[code]...
I just installed Karmic on a PowerBook G4 Titanium. The install went fine after I figured out that I had to set the date in the open firmware because the PRAM battery is dead. Now when I boot, I get a white screen with black text telling me it's found the display then the splash screen shows up but I never get the login screen, just a blank screen. I can switch to the virtual consoles and fool around, but I haven't gotten it to work yet.
Edit: I've attached .xsession-errors (Has UF always required file extensions?)
I am trying to install on my Powerbook G4 version 9.04. IT went well and I rebooted it boots up and appears to be loading... In fact says "Loading, please wait"
But the screen begins slowly to fade to white until I can't see anything.
There is one error that might be related I noticed "Radeonfb invalid rom contents".
Installed Ubuntu 10.10 on my new-to-me Powerbook 1.67Ghz. PowerPC, as a platform, is most definitely *not* dead. Installation went normal. I installed with network connected to Ethernet rather than Wireless. Installed Wireless firmware. Then I had wireless.
Backlighting didnt work until I added 'i2c-dev' to /etc/modules. Restart, and backlight works, although its a little too sensitive. Hardware acceleration wasn't enabled, so I had to add this to a file called Radeon-kms.conf in /etc/modprobe.d/
"radeon options modeset=0"
Reboot. Then I had hardware acceleration and Compiz.
Install/run sensors and sensors-detect. Run as root. Detected HD temp, CPU, GPU temps and fan speed. Make sure this is in /etc/modules: therm_adt746x. Thats the thermal control stuffs. I then installed openjdk and netbeans and eclipse. OpenJDK is slow, but I feel that is due to OpenJDK itself, and not PowerPC.
This gave me a working CPU ondemand throttling:
apt-get install cpufrequtils
Installing this gave me a working battery-applet that reported a percentage:
sudo add-apt-repository ppa:iaz/battery-status && sudo apt-get update
sudo apt-get install battery-status
/usr/lib/battery-status/battery-status --indicator
I get really good battery life, and everything that shipped on this laptop actually works as designed. Forever PowerPC, Forever Ubuntu
I've just installed Ubuntu 9.10 on an old PowerBook G4 I have, and when I go to Power Management, it doesn't provide the tab for battery-related settings (nor do I get the little battery/charge icon in the upper-right panel). I'm comparing this to the version of Ubuntu 9.10 I installed on my EeePC netbook, where those things are present. Is there anything I can do to get the Power Management preferences to recognize that the machine has a battery?
If it helps: the PowerBook had Ubuntu installed on it using the 9.10 "alternate" .iso, as I was having trouble burning the "desktop" .iso to a CD.
I have a Good Way Technologies BU2220 CardBus USB 2.0 card which works fine on this same Mac under OS 9.1. It also works fine on a more modern mac with OS X. But I cannot understand why it's not working in Ubuntu 9.10. I had it recognized (I think??) when I had Kubuntu 5.10 (Breezy Badger) installed on this system. I have an old dog - a PowerBook 3400c 240 Mhz 80MB Ram, with a 40 GB HDD. I have Mac OS 9.1 installed on a 5GB partition, and the rest is Ubuntu 9.10, using the LXDE GUI. I switch between Mac OS and Linux using Boot X.
When I slide in my USB card (making sure I have the external power supply attached to it), the system shows a bit of activity, and my display brightness reverts to default. Then there's no more activity. Of course, USB flash drives and USB mice won't work when plugged in. I navigated to /var/log, and looked in the Messages log. There were the following entries:
Feb 11 13:42:09 PowerBook kernel: [ 374.949456] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1
Feb 11 13:42:09 PowerBook kernel: [ 374.949881] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot
Feb 11 13:42:09 PowerBook kernel: [ 374.949916] pci 0000:05:00.0: PME# disabled
[code]....
I have a Titanium (Onyx) 550 Mhz G4 Powerbook and the standard gnash does not work. I read that you can compile a custom version of gnash for laptops with low spec graphic cards. Could anyone give me guidelines how to do this with gnash? or swfdec? or lightspark?
View 2 Replies View RelatedI installed Ubuntu 10.10 on my PowerBook G4 (I think that's powerbook 5,6 but I could be mistaken). Most everything is fine from a function standpoint except for the touchpad/trackpad. Unlike most users who seem to be getting an insensitive touchpad, mine seems to be picking up some interference from an unknown source. The mouse frequently jumps around the screen either horizontally back and forth or sometimes vertically. If I disable the trackpad it seems to stop (at least for a few minutes). Sometimes I can lay my palm flat on the trackpad and it will cause the mouse to stand still also which makes the external mouse usable.
Are there any solutions to this? (I did install the, what is it, gpointing-devices package? The one that provides the GUI for touchpad configuration and that has not helped at all, except that I can use it to periodically disable the trackpad for a temporary fix)
I like the Visual Effects tab feature. I noticed that is gone from Ubuntu 11.04 and subsequently from distros based on it such as Linux Mint 11.The image attached is of Ubuntu 10.10. How would I get the None and Normal effect settings in Ubuntu 11.04Linux Mint 11?
View 5 Replies View RelatedI've had a Apple Powerbook G4 for a while now, but being mostly a Windows user I've never used it. I remember when it ran it's native OSX (Which I can't for the life remember) Probably Tiger? Anyways... I tried installing Ubuntu on it about a year and a half ago, the installation was botched and I left it sitting there with no purpose in life. :O
So I've decided to dust the laptop and give it another go. I've progressed a little further with my Linux experience, having installed and tested a few distros and even switching over to Ubuntu 9.10 for about 4 months. Enough of my life story and more to the point.Has anyone installed Ubuntu, or any distro for that matter on the Apple Powerbook G4? I know there are different versions of the G4 and I'm not entirely sure what my version is, It's the 1.6Ghz version with The Nvidia card (Err I think) and extra Wireless card installed. I am not very capable with Mac - After checking Apples website I believe it's the 15inch.
I've read the FAQ thread and will begin trying to install Ubuntu tonight at home, I just wanted some suggestion and some pointers in the right direction. What distro would be most suitable for my hardware? and What is easiest to set up?
I am having a bad slowdown issue when I enable Visual Effects with the Ati proprietary drivers that come with the installation. Everything runs very slow maximizing and minimizing take about 3-5 seconds per click and the effects get all choppy and don't look right like they did on my x1950 video card. I have tried downloading the current drivers from the ATI site but they don't seem to be initialising correctly after I perform the install.
I also know that the graphics card is not the culprit as it works perfectly fine on my Windows 7 64 bit install. There is no reason that my video card cannot handle the Visual Effects as it is a 1GB 4890 should have more than enough horsepower.
My machine is:
AMD Phenom II 965 Black Edition
8 GB G. Skill 1600 DDR3 Memory
1 TB Western Digital Caviar hard drive
1 GB 4890 Graphics Card ATI.
I have acer 5738 laptop running on ubuntu 9.10...my problem is the visual effects are not being enabled.
View 1 Replies View RelatedJust installed an ATI Radeon 9500 Pro graphics card (128 Meg). Linux just seemed to work fine with it - I didn't need to install any extra drivers or anything.
Before, when I was using onboard graphics, if I tried to choose "normal" or "extra" visual effects, it told me that I didn't have sufficient hardware. Now, since installing the card, it first said "installing drivers" then a message came up saying "do you want to keep these settings .... respond in 30 secs etc...
I chose yes to keep settings but when I close "Appearance preferences" it does not retain my settings and no visual effects are activated. If I open up Visual effects again the check box next to "none" is ticked.
I looked around and there seem to be drivers available direct from ATI but are these newer than those available already on Ubuntu 9.10? It is very confusing. It seems that I have might have to uninstall existing drivers before I can install new ones and I am reluctant to do that because - at the moment, apart from visual effects, everything works And would doing this even help anyway?
In fact has anyone succeeded in getting a Radeon 9000 series card to show visual effects in Ubuntu 9.10 or should I stop wasting time and assume that it is not up to the job? I can live without visual effects (although it would be nice)
I have 1 GB ram,256 MB graphics. I installed ubuntu 10.04. first I was able to change visual effects. Now I am not able to do that.
View 1 Replies View RelatedMy Acer laptop Travelmate 290 was fine till yesterday (ie) before full update.No Error.I have the recent Ubuntu. Later When I boot I can't find my cursor but I could randomly see pop up notification of Application----Places--- System could be read.When I open any folder its fixed to top of the screen and no button for minimise,max and close.When I dig thro all the forums and solved by reinstalling metacity and change the setting of Appearance-Visual Effects to Normal.When I set to Normal it scans for the driver and asking me to confirm the setting.Once confirmed all the above problems solved but it don't reatain it,it is jump back to none. I need to do this on every boot.Is any way to avoid this? Is anyway to clean all the compiz files and setting from the PC?I vaguely remember it may be because of uninstall of compiz.
View 2 Replies View Relatedthere I turned on my Visual Effects to Extra or Normal and when I do that both the top and bottom taskbar goes away. The only way I can get them back is to turn visual effects off. Does anyone know how I can fix this issue?
View 2 Replies View RelatedCan't turn Visual effects?
View 4 Replies View RelatedI just got a new graphics card (Well, I guess you shouldn't call it a graphics card, it's more of a workstation card) Anyway, the card is the PNY Nvidia Quadro FX 580 and I installed the proper drivers for it (Nvidia 177) But, I'm encountering a problem with enabling the visual effects.Everything was running fine and I was able to use the effects until I enabled "Xinerama" two support both my monitors. Xinerama works fine, but the Visual Effects were reverted back to "None." When I click on "Extra" it searches for graphics drivers then tells me that I should switch to the graphics driver for my on-board graphics (ATI/AMD proprietary FGLRX graphics driver).
The ironic thing is that in the description for the Nvidia 177 driver it says "If you wish to enable desktop effects, this driver is required." It does not say that on the board graphics driver. Any suggestions? I want to start feeling like an Ubuntu user again rather than a windows user.
Where can i change visual effects in 11.04. In previous versions i could do it under apperances?
View 7 Replies View RelatedI'm running Ubuntu 10.10 64bit on my system. Upgraded the NVidia driver to the latest one on the NVidia website: 270.41.19 to see if it corrected a problem of when VEs were enable (even Normal not Extra), I got a white or blank screen. I could tell the system was still working because I got the text info bubbles when I moved the mouse; but when I open an app or a window, the screen was blank. After updating the driver; I can see a sharper and faster rendering image but when I enable the VEs I still get the blank screen.
View 9 Replies View RelatedAnyway, I've a decent understanding of the various Linux console commands and know how to work my way around a text editor or file system. But I can't seem to fix what's wrong with my computer. I'll list my info here and then discuss the most pressing issues that I need help with.
It's a 17" PowerBook G4, with Airport Extreme (which I understand is a headache all on its own: I'll likely get to that later)
Results of ~$ lspci:
I downloaded the most recent .iso for the PowerPC from [url], specifically the 4.4 GB DVD copy.
During installation, I told it to install only the Desktop Environment and Base System. Installation went through without a hitch, though it failed to connect properly to my Wireless card.
The first issue I encounter after booting is during the login. When logging in as a non-root user, I'm told to change my password immediately (root enforced). I've done this every time I've logged in. Immediately after when I log in I'm told that the system clock is wrong: It's currently set to Jan. 1, 1970. If I try to change it, I get a message saying that I can't, and my desktop won't load properly. If I ignore the system clock issue and try to change it in System > Administration > Time and Date later, after entering my admin password I get a message that says
Failed to run time-admin as user root.
Failed to communicate with gksu-helper.
Received:
Changing password for root.
While expecting:
Apparently the password issue is related to the Time and Date settings (according to Google), but I can't fix those because it wants me to change my password.
Problem with the Visual Effects under Appearance is grayed out. The options were available until after removing Compiz. Is there a way to restore back to the original setting of ubuntu 10.10 prior to installing Compiz?
View 9 Replies View Related
