Ubuntu / Apple :: PowerBook G4 Titanium - Can't Get To Login Screen
Feb 21, 2010
I just installed Karmic on a PowerBook G4 Titanium. The install went fine after I figured out that I had to set the date in the open firmware because the PRAM battery is dead. Now when I boot, I get a white screen with black text telling me it's found the display then the splash screen shows up but I never get the login screen, just a blank screen. I can switch to the virtual consoles and fool around, but I haven't gotten it to work yet.
I have a Titanium (Onyx) 550 Mhz G4 Powerbook and the standard gnash does not work. I read that you can compile a custom version of gnash for laptops with low spec graphic cards. Could anyone give me guidelines how to do this with gnash? or swfdec? or lightspark?
I am trying to install on my Powerbook G4 version 9.04. IT went well and I rebooted it boots up and appears to be loading... In fact says "Loading, please wait"
But the screen begins slowly to fade to white until I can't see anything.
There is one error that might be related I noticed "Radeonfb invalid rom contents".
I have a Powerbook G4, 550MHz, and I had 10.04 on it, but the wireless wouldn't work. I know that there are tons of variants, but I am sick of wasting disk, time downloading, testing, ect. Has anyone found a really good version of linux that will work? Or am I better off with OS X 10.4?
Well currently I am having a problem on the installation, when it goes to step 3 "keyboard layout" and I press forward it just stays there loading and does not proceed. It does not freezes or anything but stays there forever and does no proceed to next step. Burned another live-cd thinking it may be the disk itself but still no luck.
i installed ubuntu 10.10 on old powerbook g3 (6g hard disk, i think it lombard)m with xfce as desktop (xfce and not xubuntu wich is slower). anyway, everything works fine, but for some reson my vlc just cannot run video file. each time i play him it show a black screen and fall. i tried config his outpot video, and it still dont work, in smoe mode the audio working but the other not.i tried another movie player, and only totem, kaffeine and xine works ok, although very slowly (the video work not smoothly). kaffeine works fine, but not enough. when i had ubuntu 8.04 in the same computer vlc was the movie player i chose and he did his job perfectly.
I want to use an old Powerbook i have as a music juke box and am thinking of using ubuntu to run it - assume that i will dual boot with a small partition for osx? and then run an external hard drive with flac encoded music - into laptop then usb dac to hifi Will ubuntu run ok on this machine? I have removed all the stuff on the old hDD - anything else i need to do?
I'd like to try Ubuntu netbook remix 10.04 on my 12" G4 Powerbook, but I can't seem to find it. Does it just not exist? Apple have a range of older 12" models that are no longer supported that Ubuntu would work great on.
I am trying to find out how to get the visual effects working on my PowerBook G4. I have 10.04 installed, and it's running an ATI Mobility Radeon 9600 M10. I can't access the xorg.config because it doesn't exist.
I have an Apple Powerbook G4 17" Feb'2005 (1.67GHz PPC G4 CPU, 1Gb RAM, 100Gb hdd) at home. Having the infamous "vertical lines" problem, I need to use use an external 1440x900 DVI monitor (same resolution as braindamaged Apple LCD). I also have some USB-serial hardware (weather station, Arduino, etc) and a Nokia N900 configured as a router (this lets me use a fixed IP on the Powerbook).
I had Ubuntu 9.10 running 24h/24 up to yesterday, so I just updated the yaboot.conf in /dev/hda2 (the boot partition) and booted natty off hard disk and USB pendrive (great thing having an yaboot on a bootable partition). Since Apple separated me from 2900 bucks (ouch!!) six years ago, I don't want to abandon this Powerbook until its very end. But it seems Natty is not a viable option...
Installed Ubuntu 10.10 on my new-to-me Powerbook 1.67Ghz. PowerPC, as a platform, is most definitely *not* dead. Installation went normal. I installed with network connected to Ethernet rather than Wireless. Installed Wireless firmware. Then I had wireless.
Backlighting didnt work until I added 'i2c-dev' to /etc/modules. Restart, and backlight works, although its a little too sensitive. Hardware acceleration wasn't enabled, so I had to add this to a file called Radeon-kms.conf in /etc/modprobe.d/ "radeon options modeset=0" Reboot. Then I had hardware acceleration and Compiz.
Install/run sensors and sensors-detect. Run as root. Detected HD temp, CPU, GPU temps and fan speed. Make sure this is in /etc/modules: therm_adt746x. Thats the thermal control stuffs. I then installed openjdk and netbeans and eclipse. OpenJDK is slow, but I feel that is due to OpenJDK itself, and not PowerPC.
This gave me a working CPU ondemand throttling: apt-get install cpufrequtils
Installing this gave me a working battery-applet that reported a percentage: sudo add-apt-repository ppa:iaz/battery-status && sudo apt-get update sudo apt-get install battery-status /usr/lib/battery-status/battery-status --indicator
I get really good battery life, and everything that shipped on this laptop actually works as designed. Forever PowerPC, Forever Ubuntu
I've just installed Ubuntu 9.10 on an old PowerBook G4 I have, and when I go to Power Management, it doesn't provide the tab for battery-related settings (nor do I get the little battery/charge icon in the upper-right panel). I'm comparing this to the version of Ubuntu 9.10 I installed on my EeePC netbook, where those things are present. Is there anything I can do to get the Power Management preferences to recognize that the machine has a battery?
If it helps: the PowerBook had Ubuntu installed on it using the 9.10 "alternate" .iso, as I was having trouble burning the "desktop" .iso to a CD.
I have a Good Way Technologies BU2220 CardBus USB 2.0 card which works fine on this same Mac under OS 9.1. It also works fine on a more modern mac with OS X. But I cannot understand why it's not working in Ubuntu 9.10. I had it recognized (I think??) when I had Kubuntu 5.10 (Breezy Badger) installed on this system. I have an old dog - a PowerBook 3400c 240 Mhz 80MB Ram, with a 40 GB HDD. I have Mac OS 9.1 installed on a 5GB partition, and the rest is Ubuntu 9.10, using the LXDE GUI. I switch between Mac OS and Linux using Boot X.
When I slide in my USB card (making sure I have the external power supply attached to it), the system shows a bit of activity, and my display brightness reverts to default. Then there's no more activity. Of course, USB flash drives and USB mice won't work when plugged in. I navigated to /var/log, and looked in the Messages log. There were the following entries:
Feb 11 13:42:09 PowerBook kernel: [ 374.949456] pcmcia_socket pcmcia_socket1: pccard: CardBus card inserted into slot 1 Feb 11 13:42:09 PowerBook kernel: [ 374.949881] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot Feb 11 13:42:09 PowerBook kernel: [ 374.949916] pci 0000:05:00.0: PME# disabled
I installed Ubuntu 10.10 on my PowerBook G4 (I think that's powerbook 5,6 but I could be mistaken). Most everything is fine from a function standpoint except for the touchpad/trackpad. Unlike most users who seem to be getting an insensitive touchpad, mine seems to be picking up some interference from an unknown source. The mouse frequently jumps around the screen either horizontally back and forth or sometimes vertically. If I disable the trackpad it seems to stop (at least for a few minutes). Sometimes I can lay my palm flat on the trackpad and it will cause the mouse to stand still also which makes the external mouse usable.
Are there any solutions to this? (I did install the, what is it, gpointing-devices package? The one that provides the GUI for touchpad configuration and that has not helped at all, except that I can use it to periodically disable the trackpad for a temporary fix)
I've had a Apple Powerbook G4 for a while now, but being mostly a Windows user I've never used it. I remember when it ran it's native OSX (Which I can't for the life remember) Probably Tiger? Anyways... I tried installing Ubuntu on it about a year and a half ago, the installation was botched and I left it sitting there with no purpose in life. :O
So I've decided to dust the laptop and give it another go. I've progressed a little further with my Linux experience, having installed and tested a few distros and even switching over to Ubuntu 9.10 for about 4 months. Enough of my life story and more to the point.Has anyone installed Ubuntu, or any distro for that matter on the Apple Powerbook G4? I know there are different versions of the G4 and I'm not entirely sure what my version is, It's the 1.6Ghz version with The Nvidia card (Err I think) and extra Wireless card installed. I am not very capable with Mac - After checking Apples website I believe it's the 15inch.
I've read the FAQ thread and will begin trying to install Ubuntu tonight at home, I just wanted some suggestion and some pointers in the right direction. What distro would be most suitable for my hardware? and What is easiest to set up?
Anyway, I've a decent understanding of the various Linux console commands and know how to work my way around a text editor or file system. But I can't seem to fix what's wrong with my computer. I'll list my info here and then discuss the most pressing issues that I need help with.
It's a 17" PowerBook G4, with Airport Extreme (which I understand is a headache all on its own: I'll likely get to that later)
Results of ~$ lspci:
I downloaded the most recent .iso for the PowerPC from [url], specifically the 4.4 GB DVD copy.
During installation, I told it to install only the Desktop Environment and Base System. Installation went through without a hitch, though it failed to connect properly to my Wireless card.
The first issue I encounter after booting is during the login. When logging in as a non-root user, I'm told to change my password immediately (root enforced). I've done this every time I've logged in. Immediately after when I log in I'm told that the system clock is wrong: It's currently set to Jan. 1, 1970. If I try to change it, I get a message saying that I can't, and my desktop won't load properly. If I ignore the system clock issue and try to change it in System > Administration > Time and Date later, after entering my admin password I get a message that says
Failed to run time-admin as user root.
Failed to communicate with gksu-helper.
Received:
Changing password for root.
While expecting:
Apparently the password issue is related to the Time and Date settings (according to Google), but I can't fix those because it wants me to change my password.
However, I don't like using Apple's logo, it seems somewhat silly to me, I'm only interested in the overall appearence. During the installation, I chose the Ubuntu logo wherever I was asked, but it seems I didn't have a choice for the login screen.How can I remove that bitten apple?I found that I can set a new logo in Ubuntu Tweak, but I have no idea where to find the original Ubuntu logo file.
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
The problem come after i kill the Xorg using the kill command,and the screen turns to black without anything so that i can do nothing. The problem goes on after reboot
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100% devtmpfs Use% is 1% tmpfs Use% is 1% /dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
I have a desktop running Hardy and till friday it was running good. Today is monday and I guess it has got monday blues like I get every monday at work.Today I tried to start it as usual but it just refused to go further than login screen. I just can not login. It just hangs it there. I do not know what has gone wrong. I did not change anything since friday and no one else uses it. Theres nothing in logs that could give any idea. It just hangs without any reason and is still on the login screen for ever. It does ask my username and password but then it does not go further.But to my surprise I tried logging in with root and it gave me expected error that system administrator is not allowed to login from gnome.
I got macbook pro 5.1 recently upgraded to 11.04, all works out of the box! However when I watch movies or play a game from time to time I observe a horizontal line in the upper part of my screen which I believe is a screen tearing.Depending on a movie player this effect is more or less visible.nvidia propietary driver enabledvsync enabledcompiz settings adjusted (refresh rate ->60, vsync)nvidia-settings -l is loaded with the systemMaybe it's not a huge problem but everything works fine under osx
I'm having one heck of a time getting Ubuntu to run on a Mac Mini. The OS installs flawlessly. It's after the install that the problems start. As soon as I input my username and password the Circle icon for loading appears and nothing happens beyond that point. Mind you I've installed Ubuntu at least 20 times and I'm about fed up with it.I've installed Fedora-PPC and Vine Linux. They both allowed me to login without any problems. I just want to install and run Ubuntu
I have used Ubuntu since 7-4; I now have 10.4. However, in the last week I have been taken to the login screen three times. This could be potentially calamitous. Ctrl+Alt +Backspace have by default been disable since 9-4. There is no way I am pressing atl+Prtscr +K. I wonder if there is a new zap command in 10.4, and if so, how to disable it. I have never found the need to go back back to the login window. I am generally using the command line when doing this.
I recently powered up my netbook... Selected my user log in, entered my password, and after a couple seconds I briefly see what looks to be the console and am returned to the login splash screen... I can Ctrl+Alt+F2 to get to the console and log in... but that is as far as I can get. This is the case for Gnome, Remix, and Remix 2D.
I can sudo apt-get (update, upgrade, etc) as well. It is the right password because if I type in a wrong one it presents an authentication failure dialog box.
How can I fix my log in screen and get to my desktop? I am Currently running 10.04.... waiting to get 10.10
yesterday i installed slim login manager on my computer (eee pc 1018p, ubuntu 11.04), and now it cannot get passed the ubuntu loading screen (with orange dots underneath) when booting. i tried booting into recovery mode and that didn't work either. i also left the computer trying to boot overnight and that didn't work. basically, during this loading screen that should eventually bring you to the login screen, i can alt+tab to see the progress of the load. the progress is stuck on
Is there anything I can do from grub to remove slim?or, is there any way I can access my ubuntu partition and save all my files?
I just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
I have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix. did : CTRL + ALT + F1 switch to one virtual console sudo service gdm stop
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
