I just installed ubuntu on a remote windows server, using wubi. How can I launch ubuntu? Restarting the remote machine obviously disconnects my session. Is there some way to access the grub menu from windows?
View 9 Replies
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
How do I access the grub menu from a computer running Maverick that was loaded from the Alternate CD ?
View 5 Replies View RelatedI have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies View Relatedhow to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
How to access the grub boot menu on ubuntu 10.04 cause due to a couple of days ago i had to reinstall ubuntu cause of this crappy program called STARTUP-MANAGER SCREWED my computer. and wouldn't let me start up. it kept coming up with a message saying input signal is out of range so i had to reinstall ubuntu losing EVERYTHING. i was thinking about rolling back to xp but i thought what the heck il give it another go. how do i access this grub boot menu. cause holding shift while starting the pc up does NOT work. im using lucid lynx 10.04.
View 5 Replies View Relatedi have 2 hard drives connected to sata ports randomly on my motherboard ( i didnt do it in any order )
1. Western digital 500GB - Windows 7
2. Seagate 500GB - Linux HDD - had ubuntu 10.04 on it before suse
Ok basically, ive been trying distro's by installing them on my linux HD, my favourite is ubuntu, but i wanted to see what else is out there so i tried out OpenSUSE, and with suse i unfortantly came across many problems with grub-legacy, and i solved that eventually by changing my boot hard disk in BIOS to the seagate, and installing grub on that Ive never had a grub issue in the past using ubuntu, only with suse Then i decided to go back to ubuntu because everything just works and i like .deb packages, so i installed 10.10 32Bit
Everything went fine, chose default install options, formatted the Seagate drive, and installed to the seagate, HD changedt the boot drive to the western digital in BIOS ( were ubuntu likes to install grub in the past ) booted fine, installed fine, grub showed fine, booted to linux then i went back to windows for a day of gaming and fun, i just rebooted about 30 minutes ago to play with linux, and i cant access the grub menu my pc goes to the POST screen and then were grub should show, i get a blank screen and the pc just reboots to the POST constantly this problem has never happened with ubuntu, ive had 10.10 before, this is all started after removing opensuse
ive tried F8 and booting from both drives, the seagate i just get a white underline for ages and nothing happens and i cant boot to windows on the WD Im currently on my livecd im using the 11.04 livecd, all my cds arent labelled, so i have no idea which is which, i just chucked one in to get a browser, but i gotta say natty 11.04 IS AWSOME
My machine is an hp 2133 mininote. It came factory installed with Windows vista, which repeadtedly crashed on me. To compenstate for this i installed gOS to dual boot with Vista. This was working fine but I was recently given a Windows 7 install disk, so I decided to upgrade. Windows seven installed without a problem but now I can't access the GRUB bootloader, windows 7 just loads automatically. I tried to restore it using the Super GRUB Disk usb utility but it didn't work, windows 7 still boots regardless.
View 1 Replies View RelatedI can't access my grub menu (by pressing space bar on boot) to select a kernel to boot from, and I need to boot into 2.6.31 to fix an intel chip issue. How can I replace the current 2.6.32x kernel with 2.6.31, so it is the ONLY option grub can boot up with?
View 9 Replies View RelatedI just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
I upgraded to Ubuntu 10.04 recently and now have MBR problem. When selecting Windows XP from the GRUB menu the screen defaults to terminal mode with grub rescue> displayed. I admit I know little to nothing about Ubuntu, unix, etc other than I like what I have seen so far and am trying to learn more. I need to (unfortunately) use Windows and have data on it that I can't afford to lose. How can I repair the problem so I can boot Windows from the menu? Thank you
P.S. I was dual booting successfully earlier. I had the previous version of Ubuntu running with Win XP and everything was fine. The problem started when I upgraded to Ubuntu 10.04. I have tried reinstalling 10.04 with no success. If I am unable to get dual boot working my wish would be to save my Win data and then I can wipe clean and reinstall Win and Linux.
At the moment my GRUB 2 boot menu has all the Linux kernels, then memtests, then Windows. I want it to have Windows, then Linux, then memtests. I'm thinking I can do this by renaming /etc/grub.d/10_linux, 20_memtest86+ and 30_os-prober to 20_linux, 30_memtest86+ and 10_os-prober respectively.
View 2 Replies View Relatedi have a windows xp OS installed on C and on D ubuntu 64bit ! and i disabled from windows to see the booting manager where it shows me weather to choose Windows or ubuntu ! and the GURB menu , when it comes up i cant see windows !
Note: i tried the sudo update-gurb this or wtever command was it ! but also failed to show windows
I had Windows XP installed, then installed Ubuntu 9.10 in a different partition. I was able to choose which OS to boot. Then I did a distro update to 10.04. Now Windows is missing from the GRUB boot menu.
sudo update-grub doesn't change anything so I think sudo os-prober isn't finding Windows.
I've edited grub.cfg and can get an entry added for Windows, but it doesn't actually load Windows. It just reboots the machine. If I run sudo update-grub after adding a menuentry for Windows to grub.cfg, the menuentry I added disappears.
I've run testdisk, but BackupBS isn't an option. It says the original and backup boot sector are identical.
cfdisk says sda1 is the only partition that is NTFS and it is set to Boot.
I've already installed all available updates from lucid-security and lucid-updates.
I've run bootinfoscript and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
[Code].....
It would be nice to get a sticky thread up for dual boot installation issues. It seems like this is a very common problem with the upgrade from 9.10 to 10.04.
I was finally able to solve my issue dual booting 10.04 and Windows XP Home at this thread.
[URL]
I had to reinstall Grub2 and run update-grub.
Then I had to run Rescue on my XP disk. Once to the DOS command line I ran the following command:
C:Windows>fixboot c:
I rebooted and now all is well. I can boot to Ubuntu 10.04 or Windows XP from my Grub menu.
i have a dual boot. i loaded 9.1 on one disk and windows xp is on another. grub worked fine. i downloaded 10.4 and i must have selected the wrong option cause when i restarted it dropped me into a shell. i reloaded 9.1 and wiped out 10.4. again i must have selected the wrong option cause i get the grub menu with an option for windows but nothing happens. 9.1 comes up alright and i can select windows office files from ubuntu.
View 1 Replies View RelatedI installed Ubuntu as a dual boot to play with a while ago, but I really don't have time to be testing it right now, so I'm wanting to set the GRUB menu to automatically pick Windows 7 instead of me having to hang around waiting for the menu to pop up and hitting the right buttons when I'm barely conscious.
Someone linked me here: [URL] and I found the menu.lst file, but when I opened it to edit the default, it was blank ... is the file elsewhere now or something? Do I not have access rights to the file? What's going on, what do I do?
I installed Ubuntu onto a separate partition I have. Now however when i boot up, Grub (v1.98 ) gives m 5 options.
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery)
Memory Test (memtest86+)
Memory Test (memtest86+, serial console)
Windows Recovery Environment (loader)
With no Vista option.
When I run the recovery environment however, it runs just my regular vista boot would have. Is this just a name issue? Ideally I would like to have my Vista option back.
I upgraded Ununtu from 10.04 to 10.10 Maverick and the Windows 7 partition disappeared from my grub menu. It used to work OK in Lucid.I have tried update-grub but it does not find the Windows install.
Code:
pete@pete-vaio:~$ sudo update-grub
Generating grub.cfg ...
[code]....
I have installed f14 in my laptop. The hard disk partitions are as follows
Code:
# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code].....
Since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 9 Replies View RelatedI've just installed windows on my computer for gaming, since it took over the boot loader I went into the repair system function of the opensuse DVD. Now I'm back in linux but no windows partition is showing up on the grub menu. This is the output of fdisk -l how do I make it so grub sees my windows too? This is probably an easy fix but I'm a prior ubuntu guy and just started playing with suse which seems a bit more tech savvy and less forgiving then ubuntu. code...
View 1 Replies View RelatedI need some help since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 4 Replies View RelatedI had Windows Vista installed on my computer and created a partition to install Fedora 15. I chose the option to install fedora on any free space, so it should have installed on the empty partition. When I boot up, there are two boot options. Fedora and Other. When I select other, it gives an error:BOOTMGR not found.Is there a way to add Windows Vista to the Grub Bootloader by editing the grub menu. I don't know if it will help, but here is what I get when I run fdisk in the terminal:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
I have a vista/ubuntu 9.10 duel boot laptop. Last week the screen was broken so it went back to the manufacture. Before that I rename the /etc/grub.d/10_linux file and ran grub-update so that Grub will only show windows boot menu (in case it confuses the repairman) now I have the laptop back and I am eating my own medicine.how to restore my ubuntu boot menus? I can now only boot into windows, although it seems like I can go to my ubuntu partition and change back my grub.cfg (which I did not backup!)but I can't remember the menuentry details.Is there any way, other than manually change my grub.cfg, so that I can boot into ubuntu again?
View 5 Replies View RelatedSince upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
View 9 Replies View RelatedRecently I installed Debuan "jessie". I previously had Windows 8.1 and Xubuntu installed. After installation Debian installed it's own version of GRUB, with entries for Debian, Xubuntu and Windows. The problem is that after I selected Windows when booting, GRUB menu no longer appears. It boots straight into Windows.
It's lenovo Ideapad z510 laptop, with special button that allows me to select between 4 options before booting - one of them is "Boot menu".
I didn't use it before windows "removed" GRUB, but now there are 2 options: Windows boot loader and Ubuntu. When I select Ubuntu it loads my old boot menu (from before installing Debian).
I thought that when I use update-grub from Xubuntu I will at least eb able to boot into debian. After I did that Debian option appeared in the GRUB menu, but it didn't work - black screen.
How to get GRUB menu working again (and avoid replacing it by windows boot loader)?
I hav two 40 GB hard disks.RHEL5 is installed on 1st and Windows on 2nd. In order to use each OS I manually hav to go and change the "first boot device" option in BIOS setting and boot into required OS. GRUB doesn't show Windows in its boot menu.How can I make GRUB recognize Windows and boot into both OS using GRUB boot menu?
View 1 Replies View Relatedi have windows xp operating system yesterday i installed ubuntu9.10 dual boot when the grub gets loaded it gives me four options as follows
1) linux......
2) linux......recovery...
3) mem test...
4) windows...
when 1) linux is selected it loads ubuntu properly but. but when i select 4) windows a black page with GRUB written on the top left corner of the page is displayed and will not take any command... the only option i can do is hardboot.
