OpenSUSE Install :: No Windows On Grub Menu / Fix It?
Jul 5, 2010
I've just installed windows on my computer for gaming, since it took over the boot loader I went into the repair system function of the opensuse DVD. Now I'm back in linux but no windows partition is showing up on the grub menu. This is the output of fdisk -l how do I make it so grub sees my windows too? This is probably an easy fix but I'm a prior ubuntu guy and just started playing with suse which seems a bit more tech savvy and less forgiving then ubuntu. code...
View 1 Replies
ADVERTISEMENT
Apr 27, 2010
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
View 9 Replies
View Related
Dec 25, 2009
Since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 9 Replies
View Related
Feb 5, 2011
I need some help since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 4 Replies
View Related
Jun 2, 2010
I can't turn on my PC and write jet from my neighbors notebook. Because of problems with Windows updates und ubuntu vpn I installed today Windows 7 again and then openSuse. It was OK. Than I began with set up of different Programms for windows, like WinRar, Avira Antivir ect... As soos as it was done I wanted to begin with set up of openSuse... But the start menu is gone - there is nothing there now! Last time I could choose betwee 2 windows partitions, openSuse start-partition and openSuse fall-Save. -Now there is only "grub>" line
And I doesn't have any idea what I can do, I doesnt know where are startfiles, where is /boot/grub order, I don't know how can grub be used also. But I know that if I try to register my windows 7 agan at the same day, my windows lizens would get invalid. Has someone any idee what can be done?
View 7 Replies
View Related
Apr 17, 2010
I started another thread about this to get help booting into openSUSE after Fedora rewrote my bootloader and deleted all other entries. I managed to fix it but I never did find out why the following commands caused my system to boot to the grub shell instead of the grub menu.
Code:
grub
root (hd0,3)
setup (hd0)
quit
reboot
Can anyone explain to me why these commands caused my system to boot directly to a grub shell? It's as if there were no /boot/grub/menu.lst files for it to use, but after I got everything back to normal, the files were still there.
If it helps, this is how the drive was setup before and now, except Fedora was on /dev/sda4 and has since been deleted.
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 262 2104483+ 82 Linux swap / Solaris
/dev/sda2 263 13316 104856255 83 Linux
/dev/sda3 * 13317 14621 10482412+ 83 Linux
View 6 Replies
View Related
Jul 15, 2010
I just got a Zino HD from Dell, and was planning to use it connected to my TV, dual booting Xubuntu 10.04 and Windows 7. I did, however, run into some issues. I suspect I'm just going to have to burn a restore disc and start over, but I'd like to fix this if possible. Here's what I had to start with:
1 vfat partition (bootup?)
1 dell restore partition
1 Windows partition
Because the restore partition was a bloody 20 GB, and I could always get the restore done via disc, I reformatted it as ext4 and used it as "/". I then shrunk the Windows partition and allocated a home partition and some swap space. Note that immediately after the installer, I reformatted the home partition manually with an inode size of 128 to use with the Windows ext2 driver, but that shouldn't have really changed anything. End result file system order:
1 vfat
1 ext4 mounted as "/"
1 Windows
1 Swap
1 ext3 mounted as "/home"
I now have two problems:
1) I do not get any GRUB menu at all! It just boots directly into Xubuntu with no choices (not even memory test or restore mode).
2) I, obviously, can no longer boot Windows.
Keep in mind that this a fresh install on a brand new machine; I can't think of any reason GRUB wouldn't even show me a menu.
View 1 Replies
View Related
May 25, 2011
I was getting ubuntu grub menu, and i was able to login to windows xp, windows server 2008 and ubuntu 10.10. Recently there was some problem with windows server 2008 and i had to reinstall it, once i did that i lost my grub menu. now i am getting plain windows menu with option of login into windows xp and windows 2008. So how can i restore the grub menu, so that i can login into all the three os from one point.
View 9 Replies
View Related
Jan 24, 2009
i have a intel dual core pc with 2 hdd of 160 gb each in the 1st one i have windows 7 and open suse 11.2. in the 2nd one i have a split it into 100 gb and the rest i had kept for fedora 13. i installed the fedora 13 on the 2 nd hdd even after install.i only have the option to boot into either windows 7 or opensuse .. and no option to boot into fedora 13.how to add fedora 13 menu and boot in to it...
View 1 Replies
View Related
Jul 11, 2010
have a intel dual core pc with 2 hdd of 160 gb each in the 1st one i have windows 7 and open suse 11.2.. in the 2nd one i have a split it into 100 gb and the rest i had kept for fedora 13. i installed the fedora 13 on the 2 nd hdd even after install. i only have the option to boot into either windows 7 or opensuse .. and no option to boot into fedora 13
how to add fedora 13 menu and boot in to it..
View 7 Replies
View Related
Dec 29, 2010
I've a problem with the grub menu, I've install opensuse 11.3 on a usb HDD but the grub menu were installed on my internal HDD I've deinstal it from my internal one so that I don't have to chose between linux or windows but how can I install it back on my usb HDD?
View 2 Replies
View Related
Jul 19, 2010
Yesterday I've updated my system from 11.2 to 11.3, fllowing the guide at SDB:System upgrade - openSUSE . Everything went fine (except an error during the installation of batik) but after reboot I got a grub error:
And I couldn't boot
After a CD boot, because I didn't want to try the OpenSUSE 11.2 entry, I saw that the entry for OpenSUSE 11.3 was wrong, see below the entries for 11.3 and 11.2:
Code:
And of course it worked and my updated system works fine
View 3 Replies
View Related
Nov 1, 2010
I made a clean install of opense Suse and by mistake I overwrited the menu.lst (because of the restoration utility). As a result I have the grub error 15 : file not found, and tried everything I could think.
Grub is installed on the MBR and boots from the extended partition. The new openSuse is on sda8, there is an old openSuse on sda4 but xorg is broken. I can boot on Windows, and sda4, but not on sda8 menu.lst
Code:
Code:
Code:
Someone sees what's wrong in the menu.lst ?
View 2 Replies
View Related
Mar 14, 2011
I have Opensuse 11.2 installed (on hd0 at the time of installation) To install Windows 7 alongside I had to switch my hard drives (hd0 became hd1 and vice versa) What is the best approach to reinstall grub and get both Opensuse and Win7 visible in the grub menu?
View 1 Replies
View Related
Dec 19, 2009
I just installed OpenSuse 11.1 alongside of Ubuntu 9.10. After finishing up the installation I find that I can't get into Ubuntu. I have tried adding Ubuntu to the OpenSuse /boo/grub/menu.lst but it doesn't seem to be working.
View 9 Replies
View Related
Jul 17, 2010
After a fresh install of opensuse 11.3 and a xen-hypervisor and tools (all default install, nothing special) just get a black screen when I try to use kernel-xen. Default kernel runs like a charm. Xen-kernel gives me a black screen just after grub menu.
This is my menu.lst about it:
###Don't change this comment - YaST2 identifier: Original name: xen###
title Xen -- openSUSE 11.3 - 2.6.34-12
root (hd0,2)
[code]...
I have no nvidia card...
View 8 Replies
View Related
Sep 15, 2010
Since certainly half a year I have to add the vga=0x317 parametere at the end of the root parameter in the menu.lst file after each upgrade of the kernel and also recently after upgrading from 11.1 to 11.3. Without this, the splash screen is not shown on my HP Pavilion laptop.
View 5 Replies
View Related
Jul 27, 2010
adding Fedora Core 11 to opensuse's GRUB menu so that I can boot FC11 from it. Here's what fdisk -l shows:
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
[code]......
View 2 Replies
View Related
Jan 10, 2009
I added an entry to grub's menu.lst and reran grub (grub-install hd0) and now my background is gone and the entries just show up like on a normal console.
I searched the forums and I couldn't find anything. Does anybody know why this happened and how to fix it?
I have not changed anything in menu.lst except for adding the new OS.
View 9 Replies
View Related
Jun 20, 2010
I've recently installed suse x64 kde in dual boot mode with windows. I have 2 primary partitions with ntfs with 1 for windows7 boot and other for data/storage. There is no boot provision for data partition. SUSE install is on extended partition. I am unable to run fdisk -l and boot info script for some reason, kde is freaking me out (used to use gnome for last 4 years). The GRUB shows data as a boot and it added an entry in its menu. I will like to remove that entry from menu list.
View 9 Replies
View Related
Oct 15, 2010
I have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...
View 9 Replies
View Related
Nov 1, 2010
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
View 24 Replies
View Related
May 28, 2010
I have a dual boot system: windows xp and suse(10.2). I had to reinstall windows(again). When I tried to use the installer, it kept reseting my partitions to 500gb+ to linux. Nothing I tried would let me put it to the way it was(50gb to linux). Repair install failed. Update wouldn't work. MSwindows in the grub boot menu disappeared. I tried reinstalling suse. The installer blocked any attempt by me to put the partitions back to normal. How do reset the windows and linux partitions(850gb windows, 50gb to suse linux)?
View 9 Replies
View Related
Jan 9, 2010
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies
View Related
Mar 5, 2011
how to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
View 9 Replies
View Related
Dec 5, 2009
I already had windows installed on the c drive so linux suse 11.2 has been installed onto d. There was a problem after I finished the install - after I rebooted no menu appeared, the pc just hung on a black screen with flashing cursor, so I put the linux DVD in again and rain a repair. It repaired the boot menu but now there is no option to boot into windows.
View 9 Replies
View Related
Nov 26, 2008
I just installed OpenSuSE 11 and after it was done installing and i rebooted, Windows doesn't show up on the boot screen I only get the default OpenSuSE and Fail Safe options.
All i know is that vista is on sda3 when i partitioned my drive. Here is my menu.lst entry for windows:
###Don't change this comment - YaST2 identifier: Original name: windows###
title windows
rootnoverify (hd0,8)
chainloader (hd0,0)+1
View 9 Replies
View Related
Jan 26, 2010
i just installed openSUSE on my machine which had windows 7 in other partition as primary partition. Now after rebooting i see the green screen showing only 2 options
-Desktop -- openSUSE 11.2 -***
-Failsafe -- openSUSE 11.2 -***
how do i get my windows 7 in the list.
View 9 Replies
View Related
Mar 10, 2010
I virus got my XP installation this morning. I have to install it. When I install windows it will write over the GRUB and I will no longer be able to re-boot my openSusie OS. My question is After XP is installed is there a way to re-install GRUB without having to re-install openSusie 11.2?
View 9 Replies
View Related
Jan 20, 2010
After shutting down linux the first time on suse 11.2 the grub loader won't show me the option to boot windows. I tried using wine and dosemulator to get to windows and it doesn't work because I don't know the file name to open windows.
Their are certain programs that I can only run in windows and I need windows open to install them.
View 7 Replies
View Related
