Ubuntu Installation :: Cannot Access Grub Menu After Win7 Upgrade
Feb 6, 2010
My machine is an hp 2133 mininote. It came factory installed with Windows vista, which repeadtedly crashed on me. To compenstate for this i installed gOS to dual boot with Vista. This was working fine but I was recently given a Windows 7 install disk, so I decided to upgrade. Windows seven installed without a problem but now I can't access the GRUB bootloader, windows 7 just loads automatically. I tried to restore it using the Super GRUB Disk usb utility but it didn't work, windows 7 still boots regardless.
View 1 Replies
ADVERTISEMENT
Dec 31, 2010
Just installed Ubuntu 10.10 onto my new netbook from a USB stick. The laptop came with Win7 Starter, which I kept on a small partition. Installation was apparently successful, but when I start up the computer, it will go straight to Win7 and GRUB doesn't appear.
View 9 Replies
View Related
Oct 12, 2010
I finally got it and windows 7 installed on separate hard drives. Windows installed first, then ubuntu 10.04.01. Had to use the alternate ubuntu install cd to make it work. During the install it said there were no other operating systems installed on the computer and asked if grub could overwrite the master boor record. I knew this was something I wanted to do and if it was wrong it could most likely be fixed later. So that being said, ubuntu has taken over the boot of my pc. No grub menu pops up. Not sure how to add windows to grub to make it give me a choice. I did try pressing shift during startup to get grub to load, and nothing happened.
Here is my fdisk.
Windows is on sda and ubuntu is on sdb.
Disk /dev/sda: 74.4 GB, 74355769344 bytes
255 heads, 63 sectors/track, 9039 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x000ddedc
Device Boot Start End Blocks Id System
/dev/sda1 * 1 13 102400 7 HPFS/NTFS
Partition 1 does not end on cylinder boundary.
/dev/sda2 13 9040 72508416 7 HPFS/NTFS
Disk /dev/sdc: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x02f94d51
Device Boot Start End Blocks Id System
/dev/sdc1 * 1 19458 156295361 7 HPFS/NTFS
Disk /dev/sdb: 74.4 GB, 74355769344 bytes
255 heads, 63 sectors/track, 9039 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0005cb95
Device Boot Start End Blocks Id System
/dev/sdb1 1 8666 69606400 83 Linux
/dev/sdb2 8666 9040 3004417 5 Extended
/dev/sdb5 8666 9040 3004416 82 Linux swap / Solaris
Disk /dev/sdd: 250.1 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0195c00b
Device Boot Start End Blocks Id System
/dev/sdd1 2 30401 244188000 f W95 Ext'd (LBA)
/dev/sdd5 2 30401 244187968+ 7 HPFS/NTFS
View 8 Replies
View Related
May 3, 2011
I had Ubuntu 10 running on vmware machine. It ran fine. I upgraded to version 11, but now when the machine restarts I do not get any menu, I just get his:
GNU BRUB version 1.98-1ubunutu7
Minimal BASH-like line editing is supported.
grub>
And that is it! No menu, no list of options, nothing. If I type "ls" I get:
(hd0) (hd0,5) (hd0,1) (fd0)
I can enter "root (hd0,1)" which gives me:
(hd0,1): Filesystem is ext2.
Then typing "kernel /boot/vm" and pressing tab shows:
vmlinuz-2.6.32-27-generic vmcoreinfo-2.6.32-27-generic vmlinuz-2.6.35-28-generic vmcoreinfo-2.6.35-28-generic vmlinuz-2.6.38-8-generic vmlinuz-2.6.38-8-generic
There is no /boot/grub/menu.lst but there is /boot/grub/grub.cfg which seems fine as far as I can tell. Did I somehow end up with an older grub which is looking for menu.lst? I have other machines running Ubuntu and if I boot into them I seem to get a GRUB4DOS etc. slightly different version. The grub version shown above is 1.98 but I read somewhere Ubuntu uses version 2? Actually I found another post which suggests that this is the correct grub version for Ubuntu 11. How can I tell what menu file grub is looking for where it is looking and why its not finding or using it? It should work...
View 2 Replies
View Related
May 4, 2011
I upgraded to Natty yesterday and my system boots into it ok but I don't get a grub menu (and so no other options like recovery mode which I really need right now). I tried purging grub and re-installing it on /dev/sda but still no joy. Here's the info from the Boot Info Script. I've also tried uncommenting GRUB_GFXMODE=640x480 in /etc/default/grub but that doesn't help. How I can get the menu back?
Code:
Boot Info Script 0.56 from 8 February 2011
=> Grub2 (v1.99) is installed in the MBR of /dev/sda and looks at sector 1 of the same hard drive for core.img. core.img is at this location and looks for (,msdos1)/boot/grub on this drive.
=> Windows is installed in the MBR of /dev/sdb .....
Devices which don't seem to have a corresponding hard drive: sdc
StdErr Messages:
unlzma: Decoder error
unlzma: Decoder error
View 4 Replies
View Related
Apr 30, 2011
This seems to be a strange problem, and I have searched high and low for answers. Since Ubuntu 10.04 I have been upgrading via LiveCD and had no problems, however after an upgrade to 11.04 I now have Grub 1.99 giving me a list of versions to chose from before the OS loads. Now, call me fussy, but I don't want this, I just want to turn on my PC and go straight into Ubuntu as it always has done. I have tried various fixes such as looking for old Kernals in Package Manager, but no old kernals show up! Same for Ubuntu-Tweak, nothing shows up when I click on clean kernals.
View 5 Replies
View Related
Jun 28, 2010
I just upgraded from 9.04 to 9.10 (using Update Manager) in an attempt to get to 10.04. Installation and upgrade seemed to go OK until reboot. Now I only get a black screen - I don't see the grub menu, I don't even see any way to access the BIOS menu- not even a blinking cursor. I can hear it start and I can see the numlocks key go on. Ctrl-Alt-PrtScrn-B does not reboot (nor does Ctrl-Alt-Backspace- but I didn't expect that would) Surprisingly Ctrl-Alt-Del does (or at least it sounds like it does) reboot the system. I do have a NVIDIA cards and after reading around I suspect that this is likely the problem but I have no idea what to do now..
Here's what I've attempted:
I figured since I wanted to get to 10.04 anyway and this was so troublesome I could just go do a fresh install with a Live CD or USB to 10.04. However, even with a live CD or USB I still just get a blank screen.
Continually holding down F2 (and other function keys to try to access Bios)
Holding down Shift while booting
Esc while booting
Moving the monitor to the VGA port (as opposed to the NVIDIA card).
Other information...
Previously I had tried to upgrade to 9.10, but ran into problems with it not recognizing my RAID, so I just found it easier to go back to 9.04. (So although this is likely a graphics problem I guess the possibility is that now it doesn't even see my boot drive- although- if that was the case, I'd assume I wouldn't have the same problems from the CD or USB boot.) My ultimate goal is to get this to 10.04, if I could do it with an upgrade instead of a fresh install I'd prefer that, but at this point just getting back to a functioning computer would be ideal. I see many options in other posts for how to get back once you can access a command line- but since I can't even see that, I'm not sure what to do now.
View 3 Replies
View Related
Mar 14, 2011
I have Opensuse 11.2 installed (on hd0 at the time of installation) To install Windows 7 alongside I had to switch my hard drives (hd0 became hd1 and vice versa) What is the best approach to reinstall grub and get both Opensuse and Win7 visible in the grub menu?
View 1 Replies
View Related
Mar 4, 2011
I have 2 hard disks. sda,sdb
In sda, I have 4 partitions, and I have windows 7 in one of the extended partitions [not in the primary partition].
In sdb, I have 3 partitions. 2 for storage, and 1 10GB drive for Ubuntu. Again, Ubuntu is not of a primary partition.
I had ubuntu 10.04 running on that for a long time. However, I wanted to reinstall ubuntu and use 10.10.This is what I did EXACTLY:Booted from Ubuntu install CD
Chose advanced istall
Selected sdb3 for Ubuntu
I installed GRUB2 on the SAME partition as Ubuntu aka sdb3 Installed then rebooted
I can boot into Ubuntu fine, but whenever I select Windows 7 bootloader from the GRUB menu, the screen goes black, and my PC reboots.
Boot Info:
Code:
Boot Info Script 0.55 dated February 15th, 2010 [code]....
ls: reading directory sda6/: Input/output error
I have tried the testdisk/update-grub method, but it didn't work.
View 9 Replies
View Related
Feb 28, 2011
I installed Win7 on a 2-disk RAID0 fakeraid. I then unplugged those drives and installed linux mint on a separate drive. I did it this way because if I left the drives plugged in, linux would jack up the fakeraid for those drives and make windows upbootable, and installing linux to the fakeraid itself is just too much of a PITA. So basically, this is the disk configuration, and there's no chance of me changing it.
Right now, I can boot into either win7 or mint by pressing F12 for the boot menu, and then selecting the drive the os is installed on. It would be nice if I could just add an entry to the grub menu for win7. I've used the menu.lst file before, but apparently all that has changed with grub2. I've checked out some of the grub2 docs and poked around in /etc/grub.d, but frankly, it seems to be orders of magnitude more complicated than it should be.
View 3 Replies
View Related
Jan 23, 2011
How do I access the grub menu from a computer running Maverick that was loaded from the Alternate CD ?
View 5 Replies
View Related
Jun 25, 2011
I had a win7 installed on my system first. Then I installed Ubuntu and added grub2 boot option with win7 utility program EasyBSD. But then I accidently deleted win7 boot option from windows loader menu. Now I can only chose to load Ubuntu. How can I restore Win7 loading option? I have Win7 option in grub2 but it returns me to the previous screen, from which I have deleted win7.
View 2 Replies
View Related
Sep 1, 2011
i have ubuntu 10 and win 7 dual booting on one hdd, all of a sudden grub says error no such partition when i select windows at the boot menu. and i cant get to the win7 partition from ubuntu (to play music and stuff, this used to work, places, mount filesystem, 250 gigs whatever). i've tried the stuff in these links and nothing has worked so farpartition info
sudo fdisk -l /dev/sda
Device Boot Start End Blocks Id System
/dev/sda1 1 29094 233697523+ 7 HPFS/NTFS
/dev/sda2 * 29095 30401 10498477+ 83 Linux
View 8 Replies
View Related
Aug 30, 2010
How to access the grub boot menu on ubuntu 10.04 cause due to a couple of days ago i had to reinstall ubuntu cause of this crappy program called STARTUP-MANAGER SCREWED my computer. and wouldn't let me start up. it kept coming up with a message saying input signal is out of range so i had to reinstall ubuntu losing EVERYTHING. i was thinking about rolling back to xp but i thought what the heck il give it another go. how do i access this grub boot menu. cause holding shift while starting the pc up does NOT work. im using lucid lynx 10.04.
View 5 Replies
View Related
Jun 15, 2011
I just installed ubuntu on a remote windows server, using wubi. How can I launch ubuntu? Restarting the remote machine obviously disconnects my session. Is there some way to access the grub menu from windows?
View 9 Replies
View Related
Apr 25, 2011
i have 2 hard drives connected to sata ports randomly on my motherboard ( i didnt do it in any order )
1. Western digital 500GB - Windows 7
2. Seagate 500GB - Linux HDD - had ubuntu 10.04 on it before suse
Ok basically, ive been trying distro's by installing them on my linux HD, my favourite is ubuntu, but i wanted to see what else is out there so i tried out OpenSUSE, and with suse i unfortantly came across many problems with grub-legacy, and i solved that eventually by changing my boot hard disk in BIOS to the seagate, and installing grub on that Ive never had a grub issue in the past using ubuntu, only with suse Then i decided to go back to ubuntu because everything just works and i like .deb packages, so i installed 10.10 32Bit
Everything went fine, chose default install options, formatted the Seagate drive, and installed to the seagate, HD changedt the boot drive to the western digital in BIOS ( were ubuntu likes to install grub in the past ) booted fine, installed fine, grub showed fine, booted to linux then i went back to windows for a day of gaming and fun, i just rebooted about 30 minutes ago to play with linux, and i cant access the grub menu my pc goes to the POST screen and then were grub should show, i get a blank screen and the pc just reboots to the POST constantly this problem has never happened with ubuntu, ive had 10.10 before, this is all started after removing opensuse
ive tried F8 and booting from both drives, the seagate i just get a white underline for ages and nothing happens and i cant boot to windows on the WD Im currently on my livecd im using the 11.04 livecd, all my cds arent labelled, so i have no idea which is which, i just chucked one in to get a browser, but i gotta say natty 11.04 IS AWSOME
View 9 Replies
View Related
Aug 4, 2010
I can't access my grub menu (by pressing space bar on boot) to select a kernel to boot from, and I need to boot into 2.6.31 to fix an intel chip issue. How can I replace the current 2.6.32x kernel with 2.6.31, so it is the ONLY option grub can boot up with?
View 9 Replies
View Related
Feb 15, 2010
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
View 5 Replies
View Related
Apr 22, 2011
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies
View Related
May 18, 2010
I had 9.10 installed for a long time as a dual boot with win7 on this computer. I mostly use win7, but today i went into ubuntu and it said there was a new version available so i installed it.the error occured with the grub installation. it said if i was unsure of where to install it, i should install it on all drives, so I did. ever since then i've been looking online using this liveCD to find some solution to fix the problem, but I cant.here is what i've tried:
1. i downloaded a windows 7 repair disc and used the bootrec.exe /fixboot and /fixmbr commands, but this ends up with a blank screen with a cursor blinking.
2. I've tried re-installing grub, but this ends with the boot freezing at a screen with something like: "sh:grub>" and i can't do anything.
3. I've tried testdisk but this also didn't work for me.
i've been trying to fix this problem for 7 hours now but nothing. so i'm hoping maybe someone here would help my specific situation out.the current status of my computer: i have uninstalled grub in sda1 and sda5 (my ubuntu should be in sda5) and i used the windows7 repair CD to /fixboot and /fixmbr, so now when i boot, it freezes at a blank screen with a blinking cursor. anyone can help me, please?
View 9 Replies
View Related
Feb 20, 2010
I set up a dual boot system with Win7 and Ubuntu 9.10. Ubuntu is the first OS listed in the boot menu. I would like to change the boot order so Windows is first. Also after running a few updates I now have multiple boot items listed for Ubuntu that I'm sure are no longer needed. Having never edited Grub and searching through the forum, I'm asking help. I going to guess that I want to edit grub.cfg. If so, what do I need to change within the following information?
[Code]....
View 2 Replies
View Related
Mar 26, 2010
Looks like Grub2 on my new installation of Ubuntu 9.10 is not picking up a Windows 7 installation on a RAID0 array (using the built-in RAID software from my Asus P5Q-Deluxe)
Here are the results of the boot info script:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks for
(UUID=43b4cb20-dfea-4513-80e9-54d066107c71)/boot/grub.
=> No boot loader is installed in the MBR of /dev/sdb
[Code].....
View 9 Replies
View Related
Aug 28, 2010
I had XP Home on my dual boot Ubuntu 10.04 LTS amd64 PC & now installed Window 7 Home Premium 64-bit over old XP. Before installing Win7, as a precaution, I disconnected the hard drive where Ubuntu is installed. Now, naturally, the startup screen (grub?) still offers XP. Is there an easy way to re-detect & rewrite the startup menu with the Ubuntu install CD without re-installing Ubuntu 10.04 LTS amd64 again, like a GRUB repair or rewrite?
View 2 Replies
View Related
Sep 30, 2010
After install of Ubuntu 10.04 I cant boot WIN7 from the Grub menu.
root@asus:~# fdisk -l
Disk /dev/sda: 32.0 GB, 32017047552 bytes
255 heads, 63 sectors/track, 3892 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0xcb5bd2b2
Device Boot Start End Blocks Id System
/dev/sda1 * 1 3890 31245312 7 HPFS/NTFS
/dev/sda2 3890 3892 16154 ef EFI (FAT-12/16/32)
Disk /dev/sdb: 31.9 GB, 31914983424 bytes
255 heads, 63 sectors/track, 3880 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x0002ac5b
Device Boot Start End Blocks Id System
/dev/sdb1 1 3391 27230840+ c W95 FAT32 (LBA)
/dev/sdb2 3391 3881 3931137 5 Extended
/dev/sdb5 3391 3852 3701760 83 Linux
/dev/sdb6 3852 3881 228352 82 Linux swap / Solaris
View 3 Replies
View Related
Aug 21, 2011
I just finished my Windows 7 reinstall, and I go to reboot into Linux, and there's not grub loader. I go into a live CD and get into the grub prompt. Here's what I got:
sudo grub
grub> root (hd0,0)
grub> setup (hd0)
Error 17: Cannot mound selected partition
As for additional information, my fstab is listed below:
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0
/dev/sda6 swap swap defaults 0 0
View 4 Replies
View Related
Jul 19, 2010
Yesterday I've updated my system from 11.2 to 11.3, fllowing the guide at SDB:System upgrade - openSUSE . Everything went fine (except an error during the installation of batik) but after reboot I got a grub error:
And I couldn't boot
After a CD boot, because I didn't want to try the OpenSUSE 11.2 entry, I saw that the entry for OpenSUSE 11.3 was wrong, see below the entries for 11.3 and 11.2:
Code:
And of course it worked and my updated system works fine
View 3 Replies
View Related
Dec 21, 2010
Current set-up:
Athlon 64 2800
2 GB RAM
340 GB on two HDD
Ubuntu 10.04 LTS
Win XP Pro SP3
After getting the Silver Ghost all set up and purring like a kitten for my daughter, she now informs me she'd rather have Win7 HP instead of Win XP Pro SP3. Ubuntu and Win XP Pro are on separate HDD. Can I do a "clean install" of Win 7 HP on the Windows drive without screwing up GRUB? Or will I need to do the dance described at [URL]. I've had to modify Ubuntu because of conflicts between 10.04 and the Ralink 2780 (?) wireless-n drivers.
View 1 Replies
View Related
Dec 22, 2010
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
View 9 Replies
View Related
Apr 27, 2011
how do i correct my boot loader after installing Win7 on the free space available. i still have my fedora 13 partition intact. but of course, fedora option is not available. how do i re-install grub using the rescue dvd? tried alrerady.
View 1 Replies
View Related
Mar 25, 2010
Just update ubuntu to beta 1. When I try to load win7 it just all a get is the blinking underscore in the top left corner. What did i do wrong?
[Code]...
View 4 Replies
View Related
