i have a windows xp OS installed on C and on D ubuntu 64bit ! and i disabled from windows to see the booting manager where it shows me weather to choose Windows or ubuntu ! and the GURB menu , when it comes up i cant see windows !
Note: i tried the sudo update-gurb this or wtever command was it ! but also failed to show windows
i did a fresh install of 10.04 on my asus 1005ha netbook (first-gen 1005ha, if it matters), and it works great. However, grub does NOT detect my windows partition. In gparted, the partition is recognized as "unknown". I can't mount it in ubuntu.
This is what fdisk gives me:
WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted.
Disk /dev/sda: 160.0 GB, 160041885696 bytes
255 heads, 63 sectors/track, 19457 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
My windows 7 is not corrupted. it is also not virus-infected. I know what i am doing, and i know my windows is fine. it has been running fine prior to installing ubuntu. I'm just saying this becuz i noticed that viruses are a common response to similar problems like this.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
I have a used PC that came pre-installed with suse 11.2.Unfortunately, I do not have the install disk to use in case of whatever.I already know that when configuring a dual boot with Windows and Linux, it is recommended to install Windows first.I do not have that luxury now as 11.2 is installed and GRUB is the boot loader.Question is, if I boot the Windows 98 install disk on boot, how to not mess up GRUB and still add Windows 98 to GRUB menu?
One hard drive only here. 98gb free.It seems that W98 install will overwrite GRUB in this situation - causing problems. Maybe not, I don't really know for sure.I just need to install windows 98 on the same hard drive and if possible, have suse and w98 visible on boot in GRUB.
I have a Compaq Presario CQ60 with Nvidia GeForce 8200M graphics card. When I first installed Windows 7 followed by Karmic in dual boot I could boot into both OS. Now when I try to boot into Windows, it displays the Windows logo and then drops back to the grub menu. It may have started happening after Windows 7 installed updates. I tried reinstalling both Windows and Karmic again and it again worked initially but now Windows no longer boots. Does anyone have any suggestions about what may be causing this or how I can fix the problem without reinstalling?
View 9 Replies View Relatedhow to be able to add windows 7 to my grub menu or to even be able to boot to windows 7. I am currently unable to do it and my system just automatically goes straight to ubuntu. I've tried holding down SHIFT during startup and all that appears in my list is ubuntu entries and a memtest entry. My windows 7 files are still intact because I can see the drive through ubuntu and see all my files. I am trying to have Windows 7 on one hard disk that is 640GB and ubuntu on a second hard disk that is 160GB
[Code]...
I installed Debian on a old hard drive (quantum 5gb) and ran with it for a couple of days.. BUT all my data (including windows) is on my other hard drive.. so my question is What do I have to do to make grub detect windows and linux when I attach the 2-nd hard drive?
View 2 Replies View RelatedI've installed Lenny with no problem, but I tried switching to Squeeze, and grub for some reason didn't pick up on the Windows partition this time - it just shows the two Linux options (debian and debian single-user). I check the menu.lst file (which I've edited under Lenny with no issues), but for some reason it doesn't exist at all in this install. Is it in a different location with Squeeze maybe?
why grub didn't pick up on my Windows install?
I upgraded to Ubuntu 10.04 recently and now have MBR problem. When selecting Windows XP from the GRUB menu the screen defaults to terminal mode with grub rescue> displayed. I admit I know little to nothing about Ubuntu, unix, etc other than I like what I have seen so far and am trying to learn more. I need to (unfortunately) use Windows and have data on it that I can't afford to lose. How can I repair the problem so I can boot Windows from the menu? Thank you
P.S. I was dual booting successfully earlier. I had the previous version of Ubuntu running with Win XP and everything was fine. The problem started when I upgraded to Ubuntu 10.04. I have tried reinstalling 10.04 with no success. If I am unable to get dual boot working my wish would be to save my Win data and then I can wipe clean and reinstall Win and Linux.
At the moment my GRUB 2 boot menu has all the Linux kernels, then memtests, then Windows. I want it to have Windows, then Linux, then memtests. I'm thinking I can do this by renaming /etc/grub.d/10_linux, 20_memtest86+ and 30_os-prober to 20_linux, 30_memtest86+ and 10_os-prober respectively.
View 2 Replies View RelatedI had Windows XP installed, then installed Ubuntu 9.10 in a different partition. I was able to choose which OS to boot. Then I did a distro update to 10.04. Now Windows is missing from the GRUB boot menu.
sudo update-grub doesn't change anything so I think sudo os-prober isn't finding Windows.
I've edited grub.cfg and can get an entry added for Windows, but it doesn't actually load Windows. It just reboots the machine. If I run sudo update-grub after adding a menuentry for Windows to grub.cfg, the menuentry I added disappears.
I've run testdisk, but BackupBS isn't an option. It says the original and backup boot sector are identical.
cfdisk says sda1 is the only partition that is NTFS and it is set to Boot.
I've already installed all available updates from lucid-security and lucid-updates.
I've run bootinfoscript and here are the results:
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #5 for /boot/grub.
=> Windows is installed in the MBR of /dev/sdb
[Code].....
I just installed ubuntu on a remote windows server, using wubi. How can I launch ubuntu? Restarting the remote machine obviously disconnects my session. Is there some way to access the grub menu from windows?
View 9 Replies View RelatedIt would be nice to get a sticky thread up for dual boot installation issues. It seems like this is a very common problem with the upgrade from 9.10 to 10.04.
I was finally able to solve my issue dual booting 10.04 and Windows XP Home at this thread.
[URL]
I had to reinstall Grub2 and run update-grub.
Then I had to run Rescue on my XP disk. Once to the DOS command line I ran the following command:
C:Windows>fixboot c:
I rebooted and now all is well. I can boot to Ubuntu 10.04 or Windows XP from my Grub menu.
i have a dual boot. i loaded 9.1 on one disk and windows xp is on another. grub worked fine. i downloaded 10.4 and i must have selected the wrong option cause when i restarted it dropped me into a shell. i reloaded 9.1 and wiped out 10.4. again i must have selected the wrong option cause i get the grub menu with an option for windows but nothing happens. 9.1 comes up alright and i can select windows office files from ubuntu.
View 1 Replies View RelatedI installed Ubuntu as a dual boot to play with a while ago, but I really don't have time to be testing it right now, so I'm wanting to set the GRUB menu to automatically pick Windows 7 instead of me having to hang around waiting for the menu to pop up and hitting the right buttons when I'm barely conscious.
Someone linked me here: [URL] and I found the menu.lst file, but when I opened it to edit the default, it was blank ... is the file elsewhere now or something? Do I not have access rights to the file? What's going on, what do I do?
I installed Ubuntu onto a separate partition I have. Now however when i boot up, Grub (v1.98 ) gives m 5 options.
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery)
Memory Test (memtest86+)
Memory Test (memtest86+, serial console)
Windows Recovery Environment (loader)
With no Vista option.
When I run the recovery environment however, it runs just my regular vista boot would have. Is this just a name issue? Ideally I would like to have my Vista option back.
I upgraded Ununtu from 10.04 to 10.10 Maverick and the Windows 7 partition disappeared from my grub menu. It used to work OK in Lucid.I have tried update-grub but it does not find the Windows install.
Code:
pete@pete-vaio:~$ sudo update-grub
Generating grub.cfg ...
[code]....
I have installed f14 in my laptop. The hard disk partitions are as follows
Code:
# fdisk -l
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code].....
Since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 9 Replies View RelatedI've just installed windows on my computer for gaming, since it took over the boot loader I went into the repair system function of the opensuse DVD. Now I'm back in linux but no windows partition is showing up on the grub menu. This is the output of fdisk -l how do I make it so grub sees my windows too? This is probably an easy fix but I'm a prior ubuntu guy and just started playing with suse which seems a bit more tech savvy and less forgiving then ubuntu. code...
View 1 Replies View RelatedI need some help since i installed opensuse 11.2 when i boot my pc, grub doesnt show me windows to boot only opensuse and failsafe this is my details code...
View 4 Replies View RelatedI had Windows Vista installed on my computer and created a partition to install Fedora 15. I chose the option to install fedora on any free space, so it should have installed on the empty partition. When I boot up, there are two boot options. Fedora and Other. When I select other, it gives an error:BOOTMGR not found.Is there a way to add Windows Vista to the Grub Bootloader by editing the grub menu. I don't know if it will help, but here is what I get when I run fdisk in the terminal:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
[code]....
I have a vista/ubuntu 9.10 duel boot laptop. Last week the screen was broken so it went back to the manufacture. Before that I rename the /etc/grub.d/10_linux file and ran grub-update so that Grub will only show windows boot menu (in case it confuses the repairman) now I have the laptop back and I am eating my own medicine.how to restore my ubuntu boot menus? I can now only boot into windows, although it seems like I can go to my ubuntu partition and change back my grub.cfg (which I did not backup!)but I can't remember the menuentry details.Is there any way, other than manually change my grub.cfg, so that I can boot into ubuntu again?
View 5 Replies View RelatedSince upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
View 9 Replies View RelatedRecently I installed Debuan "jessie". I previously had Windows 8.1 and Xubuntu installed. After installation Debian installed it's own version of GRUB, with entries for Debian, Xubuntu and Windows. The problem is that after I selected Windows when booting, GRUB menu no longer appears. It boots straight into Windows.
It's lenovo Ideapad z510 laptop, with special button that allows me to select between 4 options before booting - one of them is "Boot menu".
I didn't use it before windows "removed" GRUB, but now there are 2 options: Windows boot loader and Ubuntu. When I select Ubuntu it loads my old boot menu (from before installing Debian).
I thought that when I use update-grub from Xubuntu I will at least eb able to boot into debian. After I did that Debian option appeared in the GRUB menu, but it didn't work - black screen.
How to get GRUB menu working again (and avoid replacing it by windows boot loader)?
I hav two 40 GB hard disks.RHEL5 is installed on 1st and Windows on 2nd. In order to use each OS I manually hav to go and change the "first boot device" option in BIOS setting and boot into required OS. GRUB doesn't show Windows in its boot menu.How can I make GRUB recognize Windows and boot into both OS using GRUB boot menu?
View 1 Replies View Relatedi have windows xp operating system yesterday i installed ubuntu9.10 dual boot when the grub gets loaded it gives me four options as follows
1) linux......
2) linux......recovery...
3) mem test...
4) windows...
when 1) linux is selected it loads ubuntu properly but. but when i select 4) windows a black page with GRUB written on the top left corner of the page is displayed and will not take any command... the only option i can do is hardboot.
I installed Ubuntu as a dual-boot system with Windows XP very carefully. Unfortunately, though given the option to boot Windows at the grub menu, when I select it, I get an error. Booting Ubuntu on my other partition works just fine, no issues.
I also attempted to access files from the first partition in Ubuntu using gparted, but once I mounted it, all of my files were not present. I only saw manufacturer files, and many files and folders I didn't recognize.
Also, as an aside, my laptop monitor is suffering from occasional black-outs during use. Ubuntu gave me a little toolbar flag, telling me to go to a website and use the patches given to fix it, but I'm not quite so sure where to input the given patch text. Do I really need to go through the trouble of finding the source code, etc., or is it more simple?
I recently installed Windows 7 on Virtual Box (running within Ubuntu Karmic 9.10), and it runs great. However I want to also add Windows 7 to the Grub Menu, so I can choose at the start between the Ever-Glorious Ubuntu and the Depressingly-Drab Windows 7.
View 1 Replies View RelatedI just got a Zino HD from Dell, and was planning to use it connected to my TV, dual booting Xubuntu 10.04 and Windows 7. I did, however, run into some issues. I suspect I'm just going to have to burn a restore disc and start over, but I'd like to fix this if possible. Here's what I had to start with:
1 vfat partition (bootup?)
1 dell restore partition
1 Windows partition
Because the restore partition was a bloody 20 GB, and I could always get the restore done via disc, I reformatted it as ext4 and used it as "/". I then shrunk the Windows partition and allocated a home partition and some swap space. Note that immediately after the installer, I reformatted the home partition manually with an inode size of 128 to use with the Windows ext2 driver, but that shouldn't have really changed anything. End result file system order:
1 vfat
1 ext4 mounted as "/"
1 Windows
1 Swap
1 ext3 mounted as "/home"
I now have two problems:
1) I do not get any GRUB menu at all! It just boots directly into Xubuntu with no choices (not even memory test or restore mode).
2) I, obviously, can no longer boot Windows.
Keep in mind that this a fresh install on a brand new machine; I can't think of any reason GRUB wouldn't even show me a menu.
