OpenSUSE Hardware :: Can't Get Fglrx To Work On 12.1 M5 [incl. Log]?
Sep 10, 2011
I have an iMac which is able to run openSUSE whith some manual adjustments. However, fglrx is a naughty piece of driver that keeps stalling my normal boot. I have tried many different things already, with and without xorg.conf, with and without aticonfig --initial, nomodeset (as always), reinstall, etc etc but I can't figure it out.I am able to boot to runlevel 3, but init 5 gives me 2 black screens (Mac still responsive)
- iMac 27"
- Beamer connected
- using EFI/Elilo
[code]....
View 8 Replies
ADVERTISEMENT
May 23, 2010
I just installed Kubuntu 10.04 and I am experiencing problems with the fglrx diplay driver.I installed it with Jocky and rebooted.Everything works fine. But everything is so un-smooth. Like dragging & resizing windows.It's not updating instantly.It was smooth before installing fglrx but then I couldn't boot without nomodeset.I am using a widescreen LCD monitor.My xorg.conf
Code:
Section "ServerLayout"
Identifier "aticonfig Layout"
[code]....
View 2 Replies
View Related
Jul 23, 2015
I cannot get my X working with fglrx.
Additional info:
Code: Select all# cat /etc/X11/xorg.conf.d/20-fglrx.conf
Section "Device"
Identifier "Advanced Micro Devices, Inc. [AMD/ATI] Seymour [Radeon HD 6400M/7400M Series]"
Driver "fglrx"
EndSection
[Code] ....
View 9 Replies
View Related
Oct 10, 2010
before I install fglrx 10.9 on a fresh install of Ubuntu, I was wondering which installation method works best, via ATI's website or the repositories?
View 2 Replies
View Related
Jan 5, 2011
Flgrx won't work w/switchable graphics using non-AMD chipset. I use core i5 with ati mobility radeon 5470 (so it doesn't have amd chipset). This is the X output when graphics mode in BIOS is set to switchable.
[22.909] X.Org X Server 1.9.0 Release Date: 2010-08-20
[22.909] X Protocol Version 11, Revision 0
[22.909] Build Operating System: Linux 2.6.24-27-server i686 Ubuntu
[22.909] Current Operating System: Linux xmonki-laptop 2.6.35-24-generic #42-Ubuntu SMP Thu Dec 2 01:41:57 UTC 2010 i686
[22.909] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-24-generic root=UUID=ec81127a-4c19-4930-aff6-f2704d368f34 ro quiet splash
[22.909] Build Date: 16 September 2010 05:39:22PM .....
View 2 Replies
View Related
Jan 30, 2010
I can't run multiple x servers My first X server starts gdm->gnome fine. Then I go to run
$startx -- :2 and get an error, posted at the bottom. If anyone else has fglrx and can use multiple X servers, please leave a message with:
-your distro
-x86/x64
-xorg version
-fglrx version
-anything else that might be important
My system specs are:
Debian squeeze (testing) x64
All packages done through aptitude, with exception of linux-source and fglrx-source
Radeon 4870 1Gig
All packages as up to date as possible Have always had this error, with at least last 4 fglrx versions
$startx -- :2 (as root)
Code:
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
[code]....
View 3 Replies
View Related
May 2, 2010
After upgrade to Lynx, all of my ATI drivers don't work. Whenever I try to run fglrxinfo I get " Segmentation fault " And for fgl_glxgears I get" Using GLX_SGIX_pbuffer Segmentation fault " For sudo aticonfig --initial -f " Uninitialised file found, configuring.
Using /etc/X11/xorg.conf Saved back-up to /etc/X11/xorg.conf.fglrx-11 " Compiz does not work at all either.
View 1 Replies
View Related
Feb 22, 2011
So I was stupid and careless enough to buy system with ATI Radeon HD6850.I have Maverick installed (64 bit) and everything was fine yesterday, I did usual update and today I get text prompt.I tried everything I already learned and upgraded to Catalyst 11.2 too (built packages from downloader installer), but with no luck.I see that aticonfig is now recognizing my card, which is promissing, but I'm unable to get the system to work with fglrx anyway.
I've purged the fglrx and friends, removed /etc/X11/xorg.conf and now I'm running on vesa with lower resolution.But I'm quite pissed off for loosing my morning on fixing (or failing to fix) yet another problem with ATI.
Code:
$ uname -r
2.6.35-27-generic
$ less /var/log/apt/history.log[code]..............
View 7 Replies
View Related
May 5, 2011
I have a new installation of 11.04 with an ATI Radeon HD 2400 video card that previously worked fine under an earlier release.
I tried installing the proprietary drivers through the Additional Drivers section, rebooted and the video is choppy (dragging windows, etc).
From other reports around the Internet I've read, it's clear I'm not the only one experiencing this issue.
I tried the manual instructions, which turned out to be a mess and ultimately didn't work, either.
View 3 Replies
View Related
Aug 4, 2011
I've been using Fedora 15 LXDE for a few weeks (its been great), and decided to install the ati proprietary drivers (I used the tutorial in one of the general strickies). As soon as I rebooted, I now get the following message:
Code:
Started SYSV: Late init script for live image... ATI external events daemon. into universal adresses I can type stuff using the cursor, but it doesn't do anything. I've tried adding 'runlevel 3' to the boot options in Grub to try and prevent fglrx conflicting with Xorg but it doesn't seem to work, unless I'm doing something wrong.
View 1 Replies
View Related
Feb 24, 2010
I'm trying to fix this problem: [URL] I have a problem with fglrx driver since Catalyst 9.9. After installation and reboot I get only black screen when X tries to start and keyboard doesn't work however when I press power button then the system shuts down properly after a while. I have noticed this for the first time on Hardy after installing Catalyst 9.9 and since then I have the same problem on Karmic and Catalyst 9.10/9.11 as well. I don't understand the bold text, What is this X he's talking about?
View 7 Replies
View Related
Mar 6, 2010
Is there tool or a regexp that can convert shell escape characters to HTML code?
As an example, here is a logfile from GNU screen:
Which I would like to convert to something like this:
And send as HTML e-mail to an e-mail address, to archive my work.
Here is a related question, which shows how to convert it to regular text, but it would be nice to convert to HTML and not just throw the escape characters away.
View 1 Replies
View Related
Jul 18, 2010
I am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration"
Saw this thread in /etc/apache2/mods-enabled/ I see
Code:
alias.conf authz_default.load autoindex.conf deflate.conf
dump_io.load mime.load proxy.conf proxy.load[code]...........
View 4 Replies
View Related
May 3, 2011
I seem to have disrupted my display manager when I installed fglrx from the Ati repository,
I was trying to update the graphics drivers as i am getting a screen flicker every 10-15 seconds and its beginning to annoy me, so I add the ATi repository in yast, installed 'fglrx' and rebooted.
Everything went as it should until the graphical loader showed the bar at about 50% and the screen went black, my monitor reports that its out of range after a minute or so.
My graphics card is a HD4650 and the max res of my screen is 75Hz,
Ive managed to get the command line by booting to Failsafe and started KDM manually and i get the same thing.
Im assuming that the driver is correct but is setting the resolution or refresh rate too high?
Has anyone else had this problem? and can someone point me in the direction of editing aticonfig?
View 5 Replies
View Related
Mar 18, 2010
I have a problem with the Radeon 5670 and the fglrx driver in opensuse11.2. I've created a rpm from the newest ati*x86_64.run (catalyst10.2, witch should support the radeon 5600 series) and installed it following the "ATI-the hard way" instructions. Here is the resulting Xorg.0.log:
Code:
X.Org X Server 1.6.5
Release Date: 2009-10-11
X Protocol Version 11, Revision 0
Build Operating System: openSUSE SUSE LINUX
Current Operating System: Linux sissipc 2.6.31.12-0.1-desktop #1 SMP PREEMPT 2010-01-27 08:20:11 +0100 x86_64
Build Date: 02 November 2009 12:04:43PM
[Code]...
"PCI bus 1 card 5 func 0" seems to be the Onboard-Graphics (Radeon 3200) and "PCI bus 2 card 0 func 0" i think is the Radeon5670 set as primary graphics adapter in the BIOS
View 9 Replies
View Related
May 5, 2010
I did a fresh install of openSUSE 11.2 32 bit today and installed all updates. I also installed the kernel sources and kernel symbols. Finally I installed the ATI drivers from http:///www2.ati.com/suse/11.2. The drivers didn't work after that, so I tried to run the 32 bit driver installer suitable for my gfx card (Radeon X800 XT PE -> v9.3), where I got the following error message:
==================================================
ATI Technologies Linux Driver Installer/Packager
==================================================
which: no XFree86 in (/usr/lib/mpi/gcc/openmpi/bin:/home/schaeff/bin:/usr/local/bin:/usr/bin:/sbin:/usr/sbin:/bin:/usr/bin/X11:/usr/X11R6/bin:/usr/games:/usr/lib/mit/bin:/usr/lib/mit/sbin)
Error: ./default_policy.sh does not support version
[code]....
I had no such problems with openSUSE 11.1 32 bit. Is there a way to install the drivers on my system? If yes, how would I do it?
View 3 Replies
View Related
Mar 12, 2011
I've been using fglrx since 11.3 came out, and I just upgraded to 11.4 today and noticed that my graphics card is now supported by the open-source radeon driver. I was trying to switch, but was never able to properly switch the driver and get radeon running. I've read many of the help pages, but still am unable to actually get radeon working.
Perhaps I'm missing something, such as not properly removing fglrx, but I'm not too sure.
View 9 Replies
View Related
Sep 4, 2011
I'm running openSUSE 11.4 64 bit, KDE 4.7 with latest fglrx drivers. My laptop is a HP Pavilion dv6 with a ATi Mobility Radeon HD5650M.
The drivers themselves work fine, I get quite a good acceleration and I can choose between discrete and dedicated graphics just fine, but when I plug in the HDMI cable from my TV it just doesn't detect it. It works fine on Windows version of ATi CCC, but when I open CCC in openSUSE I only see my notebook's monitor, not a sign of the HDMI cable plugged in.
View 7 Replies
View Related
Sep 14, 2010
I am running Suse 11.3 with two monitors and two video controllers -- an ATI controller on the motherboard and a separate PCI ATI board. After some startup problems, I got the onboard video working properly with the "nomodeset" command on boot, but the other display is blank. Thinking it might be the driver, I downloaded the fglrx driver (via YAST2). But now when the system boots it never opens X windows. I looked at the Xorg.0.log file and I'm getting a bunch of WW errors and then a seg fault.
The file /usr/share/doc/packages/fglrx/installer.html says I can uninstall the driver using the fglrx-uninstall.sh script, but I can't find such a script. How do I disable (uninstall, remove, get rid of) the fglrx driver and get back to where I was? I'm dead in the water if I can't get X going.
View 5 Replies
View Related
Oct 1, 2010
I've been reading about a temporary solution to the kernel/Fglrx issue caused by the last kernel update, but I haven't read about any permanent solution to this issue. Anyone know anything about a permanent solution (new kernel update?, new Fglrx driver?) to this compilation error?
View 6 Replies
View Related
Oct 29, 2010
I have an HP laptop running 11.3/KDE4.5.2, has integrated HD3200 ati graphics.
Yesterday, ATI version 10.10 fglrx driver was installed on the system, kernel was 2.6.34.7-0.4-desktop. I use the "build rpm" option with the downloads from ATI. All seemed running well.
I had installed the automatic recompile script posted by please_try_again after moving to 2.6.34.7-04, so today's new 2.6.34.7-0.5-desktop update was a chance to see it in action.
After the update and reboot, the X server restarted so I have to assume the automatic recompile script ran, although I did not see any messaging (place to look?).
However, some things did not seem "quite right". fgl_glxgears ran, but seemed slow (only 70 or so fps) pm-suspend failed to sleep the machine, I see the error message "s2ram_do: Device or resource busy" in /var/log/pm-suspend.log, which I think (?) is fglrx related but not sure why I think that. I moved to a root terminal, init 3, removed the fglrx rpm with yast, deleted the fglrx rpm and rebuilt a new one with ati....run. I then installed the new rpm (with yast), ran aticonfig --initial, then rebooted.
Basically, I am at the same level as above, fglrx installed and running, but slow and pm-suspend still not working.
So now I wonder if there is a new problem with the -5 kernel update, something like the excitement a couple weeks back when we had to patch the driver (or the kernel symbols) just to get a compile.
Can i assume someone has been able to cleanly update to 2.6.34.7-0.5 and get their fglrx running again?
An observation, which may or may not be related to my issues. The fglrx rpm installs a new /usr/lib64/dri/fglrx_dri.so, but in reviewing the log file /var/log/Xorg.0.log, it never appears to load. Two other *dri*.so modules do load. There is no "dri" section in Xorg.conf; I seem to recall there being one a while back, but much seems to be changing there.
View 5 Replies
View Related
Nov 7, 2010
That's it guys. I have successfully installed the proprietary ati drivers in past 6.34 and 6.35 kernels but not in latest .6.36. I'm wondering if this have something to do with compatibility or not.
Installation log shows me some errors I can't recognize:
Code:
View 9 Replies
View Related
Jun 13, 2010
OpenSuse 11.2
linux 2.6.31.12-0.2-desktop x86_64
ATI fglrx video driver v10.4
ATI radeon hd3200 video adapter
VirtualBox (any version) crashes at startup if the video acceleration options are enabled. This was not a problem before installing fglrx. The crash occurs when VirtualBox queries the video driver about OpenGL, I am guessing from the log file.
To (supposedly) have access to all of the features possible in the video adapter I installed the ATI fglrx video driver. I (apparently foolishly) chose the custom, installation-specific path rather than the more general default path.
After installing the driver I saw no observable improvement in performance or feature set. Worse, there are couple of new features that are decidedly undesirable, and cannot be disabled. At least one pre-loaded font simply disappeared.
So I reverted to the original (open source?) radeon driver ("sax2 -r -m 0=radeon" at runlevel 3). All seemed welluntil I ran VirtualBox.
One thing I have not tried is to run the fglrx default installation. I fear making things worse.
Can anyone suggest what might have happened with the fglrx installation, and how to fix it?
View 3 Replies
View Related
Feb 25, 2010
My console display is hard to use and read ever since I installed the ATI fglrx driver (the problem appears with any version of the driver):
ImageBam - Fast, Free Image Hosting and Photo Sharing
View 2 Replies
View Related
Jan 15, 2011
I've installed fglrx drivers with 1click install on openSuse11.3. If I try to boot in "normal mode" I end up in black screen. However if I boot in safe mode, then login and startx, everything works ok
Code:
~> fglrxinfo
display: :0.0 screen: 0
OpenGL vendor string: ATI Technologies Inc.
OpenGL renderer string: ATI Mobility Radeon HD 4300 Series
OpenGL version string: 3.3.10151 Compatibility Profile Context
Shows fglrx works OK, as well as overall performance is pretty good.
I've done
Code:
aticonfig --initial
radeon drivers is also blacklisted
but running (if it means something)
Code:
# depmod -a; lsmod | grep radeon
radeon 868858 0
ttm 64561 1 radeon
drm_kms_helper 32944 1 radeon
drm 221516 3 radeon,ttm,drm_kms_helper
i2c_algo_bit 6728 1 radeon
View 4 Replies
View Related
Apr 22, 2011
where can i get socket.h header file? will copy pasting this header file in 'incl' directory allow me to use it in the my program?
View 1 Replies
View Related
May 8, 2011
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
View 5 Replies
View Related
Oct 15, 2010
I'm trying to figure out a bug with fglrx. Whenever I go to log a machine out, sometimes the screen will go black and never come out of it. Upon reviewing the system logs for XServer, I find the following:
(II) Keyboard2: Close
(II) UnloadModule: "evdev"
(II) Mouse2: Close
(II) UnloadModule: "evdev"
[Code].....
For some reason, going back to the login screen will sometimes cause fglrx(0) to freak out and interrupt the logout process. how to force it to stop doing this or fix this issue? I'm using the ATI proprietary drivers with the latest version.
View 3 Replies
View Related
Nov 23, 2009
It's been a while since I last used the fglrx drivers, especially on my laptop which has an AMD RS690 based video adapter. While the Open Source drivers get the job done most of the time, and especially with Compiz-Fusion (yay!) these drivers still lack much optimization and since they don't intend to optimize the OpenGL stack for the current drivers and instead they'll work on it for the Gallium3D drivers, the situation is not going to get much better any time soon. However the Free drivers have gotten very robust and with very good support all in all.At first I used the fglrx drivers, but went with the Open Drivers for two main reasons:Radeon drivers were the first to get true KMS support, so they fully supported Plymouth.
Fgrlx drivers had (or still have?) a hideous bug in that they would cause screen flicker and tearing all over the place if you had a composited desktop. Wasn't as bad with Metacity's Composer Manager compared to Compiz, but still very annoying. Also they didn't properly had (or still have) RandR 1.2 support which means that if you attach a secondary display, you can't configure it as a different screen at a different resolution (for instance, main laptop display running at native 1280x800 and the secondary screen, like a projector, running at 1024x768), which the Open drivers get most of the time (note this isn't perfect in the open drivers either).
So i wanted to give the fglrx drivers a whirl once again and see how do they run... However I do not fully remember the steps involved in getting Plymouth running with the VGA/VESA console driver and the fglrx drivers (all I can remember is that it involved rebuilding the initrd [which in F12 is initramfs] to leave out the Radeon driver and you could still use the vga=[mode] argument to get Plymouth), the only other thing I can remember is that you had to run plymouth-set-default-theme to get the theme back. The main thing stopping me from going back to fglrx is that I'm not sure if all the composite issues have been resolved.
View 2 Replies
View Related
Nov 20, 2010
I traveled across the lands, searching far and wide.I found nothing that would fix my problem. Tried all the guides, copy/pasted so much script, but nothing works. This thing is like a damn virus, seriously.
View 2 Replies
View Related
