I have downloaded the drives for ATI Radeon X1300 Pro and they will not install. The Catylasy also does not work saying that ATI drivers are not installed. Does anyone know how to get this to work?
View 2 RepliesLooking at the AMD/ATI download pages, I can't tell if catalyst control center (which installs the drivers) is fully functional for Ubuntu 10.10.
Has anyone had success with this software?
I have integrated ATI Radeon 3200 HD graphics on my motherboard and can't get things working.
Today is my sort of third day with the OS and I'm still loving it. I've been able to get the hang of quite a few things in Maverick but there is one thing that I really need help with.Back in Win7, I had the very same situation and after a week of messing around I was able to get it working; it was sheer luck, but hey, who cares?
I'm running an ASUS M4A785-M motherboard with an integrated ATI 4200 video card and using a 32" Toshiba TV with HDMI video and sound, which Ubuntu was kind enough to download the proper drivers for all on its own; Win7 didn't. Problem is, the best resolution I can use is 1920x1080, but at that point some of the text looks just too small, so I use the 1776x1000 resolution instead. Still, the grand majority of websites don't fill the browser. I have to manually zoom in each time so they can look properly. I know that after a week of tinkering in Win7 I got it working just fine without the need to zoom in on pages. I can't remember for the life of me how I did it and I had accidentally formatted the entire HDD once and all those settings got lost.Lower resolutions make it worse too. On some of them, the actual computer window won't even fill the TV unless I change certain settings, and then it still looks horrible because everything gets stretched out sideways and gets squashed and even if the PC screen doesn't fill the whole tv, it overcasts itself in the middle; as if I was using a much smaller monitor and it was overcasting.
I've got my ATI driver installed, now I am trying to configure it. I have a laptop plugged into a docking station with an external monitor. I would like to use the external monitor only
I run the admin ATI Catalyst control center (amdcccle) configuration GUI, set up my settings, just as stated above (i.e. laptop monitor off, external LCD on). Works great! Then I reboot... and I have to configure it all over again
I've tried editing the settings, and then running
Code:
Here are my specs:
Code:
Catalyst Control Center (CCC) is not saving the changes I make. I saw a couple of thread about this that had links to instructions on how to install CCC, but it still doesn't work for me.
I start CCC with 'sudo amdcccle' and the GUI appears. I can use it to make changes; however, it never saves them. After clicking OK, it instructs me to restart the system. After a reboot all the setting are back to the default.
I have installed CCC three different ways:
1) sudo aptitude install --without-recommends fglrx-amdcccle | tee fglrx-amdcccle.log
2) sudo envyng -t
3) sudo ./ati-driver-installer-10-2-x86.x86_64.run
In all cases, the fglrx driver works, and 'sudo amdcccle' brings up the GUI, but the changes are gone after a reboot.
Hmm, at the moment, when I click "Apply" and the "Do you want to keep these settings?" 15 second countdown box appears, no changes occur even temporarily.
I've tried doing a fresh install of 9.04, then upgraded to 9.10 (I have problems with the 9.10 command line installer not installing grub) among other things.
I am currently using Xubuntu version 11.04 and I am working with a Radeon HD 4850 graphics card. I am using the proprietary FGLRX drivers from AMD.
I have a small problem. I have two monitors, and in order to tell the computer to use the extra monitor for extra desk space, I have to get into the Administrative CCC. However, when I click on the administrative CCC, nothing happens. It's strange considering that the regular CCC works just fine.
I've download the catalyst center for the 4870x2 from the ati site but how can I install it now?
View 9 Replies View RelatedI've got 10.10 up and running like a champ. Haven't done much in it, but all was well. After a little while I went in to turn the cool effects on, and it told me I needed a driver for my ATI card so I said go for it. It ended up putting Catalyst Control Center in for me. That's all fine and dandy except on the windows side I can get into an area that allows me to adjust overscan and turn it off (its a slider for under and overscan).
This version wont seem to let me do that, so now I'm stuck with either NOT a full screen, or no ability to have fun graphic effects. While your here, how can I change the data files which I think ubuntu refers to as your /home folder (documents pictures etc) to a different location? Windows7 and Ubuntu need to see the files in the same places so I don't have to have two working sets of files.
I run Ubuntu 10.10 on a dual monitor set up with one direct to my monitor and one to my TV through HDMI. I run the screens in clone mode with the TV showing exactly what is on my monitor(same resolutions/refresh rates). My problem is that I have problems with software that involves any sort of 3d rendering/openGL. I have ATI drivers installed and catalyst control center. I first noticed the problem just after install where I am unable to see any of the screensavers that have GL in the title. My screen just goes black even in preview mode.
I started downloading a few games. All my 2d games work, but when I installed Oolite all I got was a black screen. So I uninstalled all my ATi software and Oolite worked just fine without the ATI drivers. The screen savers still refuse to work and I am not sure where to begin to diagnose the problem. I also notice alot of tearing when watching any sort of videos on my TV screen. I haven't found any way of creating a "theater mode" where by I get fullscreen video with full V synch on one monitor whilst windowed on the other monitor.
Below are a few of my system specs:
CPU Type AMD Athlon 64, 2200 MHz (11 x 200) 3200+
Motherboard Name Unknown
Motherboard Chipset SiS 761, AMD Hammer
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (11/09/07)
Display
Video Adapter ATI Radeon HD 4300/4500 Series (512 MB)
Multimedia
Audio Adapter Analog Devices AD1888 @ SiS 7012 Audio Device
I just did a fresh install of natty, installed a few programs along with the ati catalyst control center.
I am having serious login issues, here is what I do:
I am at the login screen right from start-up, type in username and passward and hit enter, screen goes blank, it appears I am logging in, ubuntu plays a sound and puts me back at the login screen. I do not get an "Authentication Failed" error like I would expect. Unable to login as myself or as root.
However, I am able to login if I select the "safe mode," I am not able to login under the normal mode or the ubuntu classic modes.
I suspect that this issue has to do with the ati proprietary drivers, after playing with the settings for a while in safe mode I am now able to login to the normal natty mode without any apparent issues.
Here is what I changed in ati catalyst control center to boot into natty mode:
I disabled the Xinerama and Tear Free options.
Under the 3D settings, I selected the "override application setting" for all the 3D settings I could.
I believe I still have some display issues as I am unable to drag windows from one display to another, my mouse is able to move just fine across displays though.
I also found that enabling Xinerama prevented me from logging into the ubuntu and ubuntu classic modes, but I was able to login to the ubuntu with no effects mode.
I finally upgraded from my old Passive Nvidia 6600GT video card to a passive ATI 5750. Using Fedora Core 12, 2.6.32.16-141.fc12.i686, On boot the native driver worked but the card got hot as it was not de-clocking into idle mode like it does under windows 7.
So I reluctantly installed the closed source ATI driver from RPM Fusion
I also added nomodeset to the kernel start-up
Previously I was using the native standard built in Nvidia driver.
The new ATI driver seems to be running with correct entry in Xorg.conf and now it runs very cool at idle just like under windows :-
However the control center will not start...There was a problem initializing Catalyst Control Center Linux edition.
Also some commands using aticonfig return this error...
These libs are on the system in /usr/lib/catalyst
I am also getting video tearing in movies with mplayer and VLC. I have tried the options...
Which added a vsync entry in xorg.conf, but No luck...I think I need to get catalyst control center (amdcccle) running which I has a sync on refresh option radio box that may solve my video issue.
I can live with these errors but the video / movie tearing is a show stopper.
I am getting headache over this trying to find a solution to these issues. ATI and Linux still do not mix well
I have installed Catalyst 10.10 to Ubuntu 10.10 using the following methodology:
Code:
wget http://someplace/ati-driver-installer-8.783_RC1-x86.x86_64.run
chmod +x ati-driver-installer-8.783_RC1-x86.x86_64.run
[code]....
Ubuntu 10.10 x64. Got a second monitor and enabled Xinerama. It asked me to restart, I did. I opened ATI Catalyst Control Center after the restart and saw the control panel window open for about half a second before suddenly finding myself at the login screen.
ATI Catalyst Control Center has always seemed to work fine up until I enabled Xinerama. I tried removing the ATI driver, restarting, re-enabling it, restarting, and ATI Catalyst Control Center worked fine again. But, as soon as I enabled Xinerama it went back to logging me out whenever I tried to open the control center. I've tried from the GUI menu as well as the terminal using 'gksudo amdcccle', same result every time.
The dual monitor functionality seems fine, but I need to get back into the control center to adjust the colors. I do a lot of photo editing, and the adjustments in the control center really is a great tool to let me get the colors how I'd like.
I've been working on this off and on for the last couple of days and I can't seem to get this working. I'm using the latest Catalyst Control Center (11.5) and I've also got xorg.conf set up for this resolution. If I switch the driver in xorg.conf to radeon from fglrx, I can get my 1920x1080 resolution (only on GNOME;the login screen and Fluxbox have a black bar on the left that cuts off about a quarter of the screen). When using fglrx and Catalyst Control Center, I can only get a maximum resolution of 1600x1200.
Xorg.conf:
Section "ServerLayout"
Identifier "Manual Layout"
Screen "Screen-0" 0 0
[Code]...
I need to invoke the catalyst control panel from Application->System Tools with administrator rights (so i can setup my dual monitor, which for now is in clone mode ) but there is no option to execute amdcccle as root.
I tried to call it from the terminal as amdxdg-su -c amdcccle but with no success. It asks for password and then does nothing.
So i m stuck.i cant setup the screens properly till i can access the CCC with root rights, how can i achive that?
I m using fedora 14 and catalyst ver. 11.2
I just installed Ubuntu amd64 10.04 on my Gateway LT3114u Netbook. The video card on this device is ATI Radeon� X1270. For some reason the automatic driver installed by Ubuntu is not working perfectly, I noticed that because: When the "Appearance Preferences" - "Visual Effects" are set to "Normal" or "Extra", some very weird lines and images apear, and I can�t read any word as the characters are messy. But if this setting is "None", the system works just fine!
Also, I tried to install the ATI driver and the "ATI Catalyst Control Center" and when I try to run it, it says the ATI driver is not working ok. Any tips on how to solve it? Please consider Im a begginer for Ubuntu.
Maybe saying Ubuntu is getting worse is unfair. I'm not a big user I have to say. I use it more out of curiosity than anything else. I first used 8 and it was brilliant. I told all my mates about it. Everything work great. I had all desktop effects. I could use a KDE session. Then I upgraded to 9 and lost KDE ability but still had all desktop effects available. Upgraded to 10 a few weeks ago and now no desktop effects. Non of the above is a problem but I feel like, for me, it's going backwards.
I use an old AMD 2600 machine with a Radeon 9600. I used to be able to use ATI Catalyst but that didn't work after the upgrade to 10 and I can't seem to find a solution. Ubuntu is still brilliant but I don't like things being taken away from me.
So I was stupid and careless enough to buy system with ATI Radeon HD6850.I have Maverick installed (64 bit) and everything was fine yesterday, I did usual update and today I get text prompt.I tried everything I already learned and upgraded to Catalyst 11.2 too (built packages from downloader installer), but with no luck.I see that aticonfig is now recognizing my card, which is promissing, but I'm unable to get the system to work with fglrx anyway.
I've purged the fglrx and friends, removed /etc/X11/xorg.conf and now I'm running on vesa with lower resolution.But I'm quite pissed off for loosing my morning on fixing (or failing to fix) yet another problem with ATI.
Code:
$ uname -r
2.6.35-27-generic
$ less /var/log/apt/history.log[code]..............
I'm dabbling with Ubuntu, until I get my Gentoo setup going, but my issue applies to linux in general. I have just installed the Linux CCC 10.2 on Ubuntu, and I am noticing they still have not provided any method for controlling the fan speed of the video card (I'm running a XFX Radeon HD 4890). I have installed MSI Afterburner with wine; it successfully installed it, but it will not launch the actual utility. how to get MSI Afterburner to work, a Windows program that has fan control capabilities and runs well under Linux, or of any other way to rectify this issue? I have read a couple of posts on using lm-sensor to try and control my fan speed issue, but I have not figured this out either.
View 2 Replies View RelatedIs it possible for plymouth to work with the ATI Catalyst driver installed in Fedora 15 x86_64?
Is it that plymouth requires KMS and Catalyst doesn't provide it? With the nvidia driver, I could put a vga= line in grub and plymouth would run. Is there something similar for catalyst?
I have Ubuntu 10.10, Software Center does not work, and it always shows up errors. When I run:
Code:
dpkg --configure -a
I get:
Code:
Setting up gconf2 (2.31.91-0ubuntu3.1) ...
[Code]....
i meet a problem recently while i try to install a software via software center. After i start the software center, i input the name of software into the input filed. The panel keep the status of searching with nothing return. While i click the installed software, the right panel show nothing but the icon showing processing. My network works perfect, i can install software using the terminal. The ubuntu version i used is 10.14.
View 4 Replies View RelatedEvery time I try to open the Software-Center It doesn't works, I've tried to reinstall, but the problem still, and I can't find the solution anywhere
When I try to open it with the terminal, it shows this message code...
It doesn't matter if I set the audio to 5.1 or 7.1, the center and LFE are silent. I had the same problem in 9.10 but I could work around by using the alsamixer to set the center to 90%, quit, then set back to 100%. This doesn't work in 10.04 as the controls in the alsamixer can't be changed. Is there any way I can get the center channel working? All I can do at the moment is set the sound properties to 4.0 so that the center channel is automatically redistributed to the other channels, but that isn't a great solution.
View 2 Replies View RelatedMy ubuntu software center will as stated not work properly, i will click a categ0ry and it will just sit there searching, same with if I just search for something, is there something wrong with my Ubuntu installation or is the ubuntu software center server down or something?
View 9 Replies View RelatedI have a personal laptop and a work laptop. personal is running ubuntu 10.4(which im planning upgrade to 10.10 soon) and Win-Xp on work laptop. I would like to run ubuntu on work machine, but i need to use vmware vsphere client regularly as half my work is related to it.
Is there an alternative available for vmware vsphere client? How can i have ubuntu on work laptop and have access to VMs via the control center? Is running Windows-XP on ubuntu via vitual box a resolution? If yes, I have 3GB of RAM on my work laptop, is that enough?
Few weeks ago I installed Linux Ubuntu 9.10 and everything was fine. However, Iḿ now triyng to install programs from the Ubuntu Software Center and it does not work properly. I just select the program I want to install and press the button, but I do not get a response. Net connection is ok, so the problem is somewhere else.
View 3 Replies View RelatedAfter I've setup the ubuntu 9.10 I've found that the internet connection working incorrectly. I can ping or even connect to the internet sites with the telnet and see the raw html pages, but when I ran the software center or mozilla I have timeout error message. As a proxy settings I've setup the direct connection in both system and mozilla proxy configurations but it takes no reason. If I put the IP address instead of the domain name in the address bar of the mozilla browser then its loaded the web page correctly. It looks like this problem is relative to some system configuration of X about network (cause telnet google.com 80 working right). I'm using the dhcp connection to the D-Link DSL-504T router.
View 8 Replies View RelatedUpdate manager and software center both run, but when I click on "install," they both just sit there and don't respond. If I run software center from a command line, I get the error "WARNING - _on_trans_error: org.freedesktop.PolicyKit.Error.Failed." (There are no updates right now, so I can't get an error from the update manager.) Apparently they aren't invoking gksudo or whatever it is they need to elevate privileges. I can get around this by running them as root, but it is kind of annoying. I'm really surprised that no one else has had this problem, but I've searched it a number of times and I can't find any indication of someone having the same symptoms.
View 4 Replies View RelatedWhen I try to open Ubuntu software center, it appears on the process bar for about 10 seconds before it disappears. I can't get it to start.
I have tried alt+f2 and typing 'software-center', didn't help. I tried reinstalling ubuntu software center in Synoptic package manager, but I got this error message: "E: /var/cache/apt/archives/software-center_3.0.7_all.deb: subprocess new pre-removal script returned error exit status 1"
This started to happen after I reinstalled Ubuntu 10.10. After I did that, I got the 'modprobe: FATAL: Could not load /lib/modules/2.6.8.custem/modules.deb, no such
file or directory.' error. Could these two problems be related in any way?