I'm trying to get a fresh install of Ubuntu 10.10. I've used unetbootin to write the image to a usb flash, but every time I try to boot from it I just get the burg splash screen. I've changed the boot order in bios and so on, but it starts burg all the time. The image md5 is also right.
View 5 Replies
I have a duel booting system, Ubuntu 11.04 and Windows 7. I have installed burg. I have ended up with text when booting ubuntu. When I changed the splash it only show on shut down. How can i make it show on boot?
View 3 Replies View RelatedI boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies View RelatedToday I wanted to get rid of ugly GRUB and installed GRUB. I really like it, but there is one annoyance - I used these tips:URL...To have a Splash screen in Ubuntu in full 1680x1050 32-bit, and it worked perfectly. But when I installed BURG in the place of GRUB, I have 640x480 ugly boot splash as I had in the very beginning.Repeating the steps doesn't seem to help. What should I do?I should note that I easily changed BURG's resolution to 1680x1050 using 'R' while in BURG. 640x480 only applies to Splash after I choose Ubuntu.
View 2 Replies View RelatedThought BURG would be cool so I installed it. Something is very wrong. (See attached photos) all I get is the 1st photo, BURG version 1.98+20100623-1+karmic. If I tab I get photo 2. At this point I'd be happy just to restore GRUB2 & forget BURG but I can't even boot to any OS. I haven't had Ubuntu on this PC for long so maybe the best, or simplest option, would be to re-install Ubuntu- which would rewrite grub2.
View 9 Replies View RelatedI just recently stumbled upon a post on OMG Ubuntu about installing Burg [URL]so i went and tried it.all of the steps went alright, until i typed in
Code:
sudo burg-install �(hd0)�
where i replaced "(hd0)" with "/dev/sda1"
[code]....
I like the artwork used in Xubuntu 9.04 for the splash screen.So,I searched my Xubuntu 9.04 install for it. But, can't find it.Does anyone know where it's located? Picture of splash screen is attached to this post.I've done the following two searches of the file system but no luck:
# find / -iname "*xfce*.png"
# find / -iname "*xubun*.png"
I been trying to change the splash screen, boot screen thing and now when it boots it just goes right to the log-in screen. I installed "startupmanager" but every .so file I try to add, just won't get added for some reason.
View 3 Replies View RelatedWhen I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
My friend was showing me how to change the splash screen and used a app called start up manager (SUM).He changed the resolutions for GRUB and something else. The GRUB screen resolutions has changed fine but after that I get a line of text which I cant read as its too quick.
View 6 Replies View RelatedSo I turned off my computer the other day (I leave my laptop on, pretty much 24/7 I only turn it off if I have to, or I forget to plug it in I turned it off this time just because it was feeling warm)...
And when I went to turn it back on, the splash screen was big and ugly looking, then the orange ("loading") dots loaded to the end... but then it just stopped.
My computer wouldn't boot up... so then I used one of the older versions (you know grub lets you select versions before upgrades or whatever)... and the boot splash was the nice small version... and it loaded just fine, but then after the splash screen went away... the monitor just stayed black... same thing with the version before that.
So then I tried recovery mode on the first one (the latest), and when I clicked "boot normally" it took me to shell. However, everything was working fine, I could load up my non-x dependent programs like IRSSI just fine.
I think it has something to do with me installing the ATI proprietary driver (which was stupid of me, Ubuntu was handling my graphics card perfectly without it... and I hate using closed sourced software).
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
I don't know what caused it, but as I boot into Ubuntu (9.10), the login screen never appears. Boot splash shows,then the cursor shows up but never the login screen. I haven't found anything that will reset the default gdm or login screen that works.
View 2 Replies View RelatedI set up a dual boot on my laptop a few days ago, between Windows XP and Ubuntu 9.10 (installed from Live CD). All the hardware is working fine.
Anyway, SOMEtimes, during the splash screen , the screen turns off (physically turns off) and the hard disk seems to stop. I cant do anything appart from force it to power down.
Yet sometimes, it boots up fine.
I want Ubuntu to work first time EVERY time.
I just installed ubuntu 10.4 on my new laptop and when it boots up there is no splash screen (All I see is a blinking cursor) and it takes about 28 seconds to boot up... I do have all the graphic stuff working...
View 2 Replies View RelatedI recently installed my first distro, Gnome Ubuntu Linux 10.04 via WUBI dual-booting alongside my Windows. I decided to try the other desktop environments. So I installed Kubuntu-Desktop (KDE) and Xubuntu-Desktop (XFCE) using Synaptic Package Manager.
However, Kubuntu KDE changed the boot splash screen into a from the default Ubuntu one, to the Kubuntu one. Also Xubuntu XFCE changed the log-in screen to the Xubuntu one. I DO NOT want these changes. I just wanted Normal Ubuntu-branded Ubuntu Linux with the option of logging in into the desktop environment of my choice.
I've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
View 2 Replies View RelatedI tried to fix splash screen resolution on boot up in 10.04 from instructions I found on the net. I updated lines in grub. Now when I boot I see the dual boot menu but hit linux i just get a black screen. I can't get into my system from there.
View 7 Replies View RelatedI'd like to change the boot splash screen from the current 'Xubuntu' text in white on a black background.Making changes in Settings->Xfce 4 Setting Manager->Session and Startup has had no effect, and Startup Manager does not display an option to change the splash. I feel I'm missing something obvious here, but where should I be looking?
View 1 Replies View RelatedI would like to know how to change the boot/startup splash screen in Lubuntu.
View 6 Replies View RelatedI switched back to my ubuntu installation few hours ago and I couldn't notice the strange boot screen! I remember that it used to be orange, there was the ubuntu logo and a nice loading bar. All is displayed now is a horrible purple background with just the text "Ubuntu" in the middle and a few dots just below it, showing the loading process.. I don't know how to restore the classic splash screen (I also found the original background in /usr/share/images/xsplash ).
View 2 Replies View RelatedI just recently installed 11.04 fresh onto my computer. Everything's been working great and i've been enjoying the new interface immensely. However, today when i booted my pc up, after i entered my password and logged in, I'm stuck at the splash screen. I can move the mouse and i have the default 11.04 image up on the screen, but ive got no menus or taskbars and i know it hasn't logged in yet, because my wallpaper isnt up. I've restarted a number of times and this keeps happening.
View 1 Replies View RelatedI have a Dell dimension 8300 dual booting with windows 7 and ubuntu 10.10. I installed BURG on it since I didnt like the text grub style. Problem is I cant change the splash screen no matter what I do, or changes I make. My screen resolution is 1280x1024 and my video card is an Nvidia card.
Originally the splash screen was a purple screen with ubuntu 10.10 white text and some dots on it. After installing the plymouth themes, now it has changed to a blue screen with Kubuntu(?) on it... Id like to know whats wrong and how can I change the splash screen?
UPDATE: Ok I went to synaptic and saw plymouth.kubuntu-logo and kubuntu-text were installed and enabled (had litle ubuntu logo to the side). So I removed those 2 files then did a reboot. Now im back to the purple screen with ubuntu 10.10 white text and the dots but I still cant change the splash screen...
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies View RelatedSince updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies View RelatedI'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies View Relatedhow to change the boot splash screen in Ubuntu (it's using xsplash) but since openSUSE is most likely a bit different, i would like to find out how i can change it here, on openSUSE 11.2
View 1 Replies View RelatedI have never been able to see the splash screen, something that I'd like. I have checked the options on the bootloader and it says "splash=silent" (that's disabled?). I found it confusing, because the ubuntu kernel boots with "splash" but when I try that option on OpenSuSE 11.2 it doesn't.Also when I shut down the laptop the screen goes crazy, only the two top cms shows "something" which are blinking and crazy green and white console words moving from one place to another so fast I can't even been able to read what it actually says.Either way, the laptop shuts down without any problem (?). I think is the normal shutdown process (without splash) but it's a bit perturbing. I've had had a couple of kind of "aesthetics" issues, but far from critical. My overall experience with OpenSuSE after 4 or 5 years being "debianized" have been very nice .
View 3 Replies View Related
