Ubuntu :: 4.10 In Virtualbox Installation Error?
Jun 28, 2010I was bored and decided to put ubuntu 4.10 on my virtualbox. but during the installation, this happened:
I gave it 256 MB RAM and a 20 GB Virtual Hard Drive.
I was bored and decided to put ubuntu 4.10 on my virtualbox. but during the installation, this happened:
I gave it 256 MB RAM and a 20 GB Virtual Hard Drive.
I'm installing Sun Virtualbox and get the following error message. The install does not stop or crash, but just don't know what to do about this message:
Code:
An error occurred while loading or saving configuration information for frontend. Some of your configuration settings may not work properly.
[code]....
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
Trying to run windows only apps. I installed Wine first from software center. Most progs I try to run only give me the 'working' icon for 20 seconds then nothing. I did modify properties to allow .exe to run. I Dl'ed & installed the VirtualBox package w sw center and same deal- nothing. No error messages or anythng.
Running Ubuntu maverick. My Cpu is a compaq presario laptop CQ50, dual core intel T3200. Not the best but should at least start the progs yes?
Can't really troubleshoot as I have no feedback at all.
I tried to install VirtualBox 32 bit on my 64bit Fedora11 OS. I took the 32 bit version as I want to run a 32bit software. I collected all information I could get from other forums. That's what I did: I downloaded and installed [URL]
yum groupinstall "Development Tools"
/etc/init.d/vboxdrv setup
Now I got stucked with the error Qt WARNING: QGtkStyle was unable to detect the current GTK+ theme. I searched for qt or qgtkstyle on my system and found files containing both but don't know what to do here.
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
I'm using Virtualbox to test Meerkat. I have the same problem with Ubuntu & Xubuntu,
Here is the output from VBoxLinuxAdditions-x86.run..
Here's the last few lines from vboxadd-install.log..
I'm using the Virtual box on Ubuntu which has Windows XP on it. Probably after WinXP was automatically updated, I started getting an error message: "DLL C:WINDOWSsystem32DNSAPI.dll is not a valid windows image." and I cannot log on anymore. I tried to find a solution but since I'm using the Virtualbox, I don't know how to access the virtual "Windows folder" from Ubuntu
View 7 Replies View RelatedI have an ubuntu 10.10 64 bits. I am getting this error while trying to install virtualbox
[Code]....
I have a gnome 11.4 64bit. I want to install VirtualBox-4.0-4.0.12_72916_openSUSE114-1.x86_64.rpm in my system and I get this error:
Code:
error: Failed dependencies:
initscripts is needed by VirtualBox-4.0-4.0.12_72916_openSUSE114-1.x86_64
I have a Debian 8 and i installed virtualbox via this command
Code: Select allapt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') virtualbox
When I want to install Windows 8 on my virtualbox i get this error
Code: Select allVT-x/AMD-V hardware acceleration has been enabled, but is not operational. Certain guests (e.g. OS/2 and QNX) requireat y this feature. Please ensure thou have enabled VT-x/AMD-V properly in the BIOS of your host computer.
I was notified by the updater that VirtualBox-3.2-3.2.10_66523_fedora12-1 (x86_64) was available to install. So I clicked [Install Update] and got the following Transaction error:The GPG keys listed for the "Fedora 12 - x86_64 - VirtualBox" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.
View 2 Replies View Relatedafter install virtualbox i have this error when i try to run it.
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL) Aborted (core dumped).
The virtual machine execution may run into an error condition as described below. We suggest that you take an appropriate action to avert the error. The host I/O cache for at least one controller is disabled and the medium '/home/MyUserName/.VirtualBox/HardDisks/Ubuntu_LAMP.vdi' for this VM is located on an ext4 partition. There is a known Linux kernel bug which can lead to the corruption of the virtual disk image under these conditions. Either enable the host I/O cache permanently in the VM settings or put the disk image and the snapshot folder onto a different file system. The host I/O cache will now be enabled for this medium.
View 5 Replies View RelatedI just installed VB, but I cannot manage it starting.
uname -a output:
Code:
As told in the FAQ on virtualbox.org, I downloaded and run the amd64 version of VB version 3.1.2. (since I have a 64bit CPU) Install worked just fine, but when I'm trying to launch it, I get the following error message:
Code:
I'm trying to compile virtualbox 3.2.10 con slackware current 32bit through sbopkg
I get this error (I'll copy only the end part)
Code:
CXX VMMR3 - {C}/src/VBox/VMM/VMMAll/TMAllCpu.cpp
cc1plus: warnings being treated as errors
In file included from /tmp/SBo/VirtualBox-3.2.10_OSE/src/VBox/VMM/VMMAll/PGMAll.cpp:236:0:
[Code].....
I'm currently running VB 3.0.10 on Fedora 12 64 bit.
When I attempt to upgrade my current install to 3.1 I get the following:
I am somewhat puzzled as this is a upgrade from a stable installed version. I have confirmed I have libcrypto.so.8 . . . from what I can tell its part of the openssl package but I've got the most current so I don't know how to obtain the libcrypto.so.10 file to correct this issue.
I have downloaded latest version of sun vm virtual box foe Fedora 13 x64. After installing and creating a VM when I want to start vm I got this error. And when I enter this command on terminal :
/etc/init.d/vboxdrv setup
I get this error:
Code:
[root@localhost arash]# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
Log file:
Code:
[root@localhost arash]# cat /var/log/vbox-install.log
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
[root@localhost arash]#
I have Fedora14. I have added virtualbox repository. On going through virtualbox.org site, I learned that virtualbox-4.1 released. I tired to update by yum update on 19.0.2011. No new package. I tried to download it from virtualbox.org (VirtualBox-4.1 Fedora14-i386). It failed on 19.0.2011 giving message that link is not operational. Today i.e. on 20.07.2011, I tired once again yum update. No new package. I tried to download from virtualbox.org. download succeed but it did not installed giving error message regarding conflicting files. Till not in repository?
View 5 Replies View RelatedI managed to install Virtualbox on my opensuse 11.2 I configured it for a windows xp guest OS. When I start the guest OS, I get error mesages.
[URL]
When I execute the command "/etc/init.d/vboxdrv setup" it failed. I checked the directory and saw that the file vboxdrv is missing.
uname -r prints 2.6.18-164.el5
Yum install kernel-headers/kernel-devel gives me 2.6.18-194
When trying to run virtualbox I get an error:
Kernel Driver not installed: (rc=-1908)
Please reinstall the kernel module by running "/etc/init.d/vboxdrv setup" as root...
/etc/init.d/vboxdrv setup
Stopping VirtualBox kernel modules [OK]
Uninstalling old VirtualBox DKMS kernel modules [OK]
Trying to register the VirtualBox kernel modules using DKMS
Error! Your kernel headers for kernel 2.6.18-164.el5 cannot be found at /lib/modules/2.6.18-164.el5/build or /lib/modules/2.6.18-164.el5/source. [FAILED]
(Failed, trying without DKMS)
Recompiling VirtualBox kernel modules [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
I'm assuming the setup program is using the output from uname -r to determine the kernel, the problem is the kernel sources I've got from yum do not jibe with the uname value.
Unable to run VB, I get following error -
Code:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. I've dkms installed and did a reboot as well.
I can see this error occurring in multiple past versions of suse. The answer seems to involve recompiling the open source version of VBox, but this is surely overkill. Isn't there a way to either a)get the right kernel version of VBox for 11.3 or b)set whatever permissions are required.
In all the answer so far I can't see a solution I can understand for these combinations, sues 11.3 and VBox 3.2.8. The error is consistent, and if the install doesn't work properly (it took my a few attempts even to install it without error messages) then surely its an issue either for Oracle or Suse? It runs ok but hwen trying to fire up a newly created XP VM this error message occurs trying to switch from W764bit to suse11.3 64bit
I am running Lenny and using VirtualBox OSE 1.6.6. In order to try squeeze I installed it in a VM. I tried to install Guest Additions also, but i get this error:
VirtualBox 1.6.6 Guest Additions installation
Building the VirtualBox Guest Additions kernel module...
Building the shared folder support kernel module...
Unable to build the kernel module.
I checked what /var/log/vboxadd-install.log had to say:
/usr/src/linux-headers-2.6.32-5-common/include/net/neighbour.h:115: error: variably modified a at file scope
/tmp/vbox.0/utils.c: In function 'sf_path_from_dentry:
[code].....
I tried with 3 versions of the kernel 2.6.32-5-686,2.6.32-5-484,2.6.32-3-686 but I cannot get it to work using any of them. Also I tried to install version 2.6.30-2-686 but I couldn't since synaptic said that it Depends: linux-kbuild-2.6.30 but it is not installable.
i installed SLES 11 sp1 as guest on openSUSE 11.3 host, then change the adapter network from 'NAT' to 'Bridged Adapter', but when i hit start i got this error message: Failed to open a session for the virtual machine sles. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). but when run: sudo /etc/init.d/vboxdrv setup
[Code]....
When i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
Running VirtualBox 3.2.6 under some host OS (should be irrelevant which one, right?), I created a machine, intending to install Fedora 13 on it. Got the Fedora 13 Live CD iso image, and an 8.6 GB virtual hard drive, completely blank. I set the machine to boot off the Live CD image. The Live CD boots nicely and I get to its desktop. I open "Install to Hard Drive"...and nothing happens. No error message, zip, nada. Inspection of the system shows a series of odd file systems, but I have no clue what they are for and whether they're usable or not.
The sticky [URL] mentions that the blank virtual hard disk should be partitioned and formatted beforehand...So I did, using the Live CD's Disk Utility (Applications: System Tools: Disk Utility). Although the sticky states the small /boot partition should be ext2 or ext3, the Live CD installer proposes to reformat it as ext4. Shouldn't we have formatted it as ext4 right away, then? Also, the installer set the /boot partition's size to 524 MB, not 200 MB as recommended by the sticky.
OBSERVATION: This was not easy because VirtualBox sets the display to 800x600 at most, and the Disk Utility spills beyond those confines WITHOUT PROVIDING SLIDERS. It was sheer luck that the required buttons (create partition, format partition) were barely reachable (at the bottom edge of the screen). This is a serious problem, because increasing the VirtualBox display size can only be done *after* installation (see for instance[URL] - since this guest addition requires rebooting the guest OS, it probably won't stick to the Live CD).
Once those two partitions are prepared and the virtual machine rebooted, "Install to Hard Drive" works as expected.
OBSERVATION: It is absolutely inexcusable that the Live CD installer (Anaconda?) does not propose to do this partitioning and formatting for the user. It is even more inexcusable that it should fail without giving any feedback whatsoever to the user.
Aside: VirtualBox's guest additions does not work correctly (for 3.2.6 anyway). The Devices: Install Guest Additions menu merely mounts a CD image VBOXADDITIONS_3.2.6_63112) without any feedback (expected feedback because the menu ends with an ellipsis). The CD, once opened, has an Open Autorun Prompt button...which fails to do anything. Manually running autorun.sh also fails. I had to manually invoke VBoxLinuxAdditions-x86.run from a terminal to get anywhere. Even then I was unable to go higher than 1024x768.
I opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
Wishing to test F12 final release, tried to install as guest on Virtualbox OSE/ Ubuntu 9.10. F12 installed text only and no X. Using 384Mb main and 16Mb video memory on 8Gb virtual hdd. Installed from tested DVD. F12 or Virtualbox? U9.10 guest install worked perfectly.
View 2 Replies View Relatedhow to install virtualbox on ubuntu 7.04. I tryed to install VirtualBox-3.1.2_OSE from virtualbox.org and following the instructions i have downloaded it using terminal but i dont know how to install it .
View 3 Replies View Related