I was notified by the updater that VirtualBox-3.2-3.2.10_66523_fedora12-1 (x86_64) was available to install. So I clicked [Install Update] and got the following Transaction error:The GPG keys listed for the "Fedora 12 - x86_64 - VirtualBox" repository are already installed but they are not correct for this package.Check that the correct key URLs are configured for this repository.
View 2 RepliesI'm a new user for oracle,tried to install oracle 10g on redhat linux 5 but gettinh the same error message.response/ runInstaller[oracle2@localhost database_10201]$ sh runInstaller _runInstaller: line 54:/tmp/database_10201/install/.oui: Permission denied_Doany one plz help me how to give full set of permisions to an user in linux to access a folder??
View 2 Replies View RelatedI am trying to install guest additions on Oracle Enterprise Linux Update 5. Whenever I try to the run VBoxLinuxAdditions-x86.run script I get the following problem:
erifying archive integrity.All good. Uncompressing VirtualBox 2.0.0 Guest Additions for Linux installation. VirtualBox 3.0.6 Guest Additions installation install the build and header files for your current Linux kernel. The current kernel version is 2.6.18-164.el5PAE Problems were found which would prevent the Guest Additions from installing. correct these problems and try again. I also tried yum install using the following commands without any luck:
yum install kernel-devel kernel-headers-`uname -r`
Following are the package information of my kernel-devel and headers:
> rpm -q kernel-devel
kernel-devel-2.6.18-164.el5
> rpm -q kernel-headers
kernel-headers-2.6.18-164.el5
I have been spending a couple of hours already on how to fix this but I still couldnt get to install this.
Is there a way to get Oracle virtualbox on Jessie yet? I only see one for wheezy at the oracle site.
View 3 Replies View RelatedAdded the repo and installed Virtualbox.
Added user as vboxusers group
Added the following packages according to the error log
- make gcc kernel-source dkms
Finally /etc/init.d/vboxdrv setup reports an error
Stopping VirtualBox kernel modules done
Uninstalling old VirtualBox DKMS kernel
[Code].....
Im trying to run Arch Linux off Oracle vm virtualbox and everything going fine until It wants to wipe my entire hard drive. To be fully honest im afraid to touch it. I feel like it might bite my finger off if I poke at it in my usual way (first time ever using VM) so I was wondering if anyone has any tips or advice for me. Maybe someone elce has tryed this before and can tell me my computer wont explode when I partition. (I know it wont but I only have 1 computer and afraid to ruin it with my "experiments" cant afford a new one) I think because its VM it will only partition the space I set for it when I started the VM box. Just looking to be safe before I try it
View 4 Replies View Relatedhow to install linux redhat and oracle 11g in sun virtualbox?. That thing is giving me a lot of headache.
View 2 Replies View RelatedI upgraded to fedora 12 today from fedora 11. I had oracle-xe 10g running on my system perfectly fine when I was running fedora 11. now , after the upgrade, i cannot login to sql.it gives the following error
Code:
SQL*Plus: Release 10.2.0.1.0 - Production on Wed Dec 16 12:45:25 2009
Copyright (c) 1982, 2005, Oracle. All rights reserved.
ERROR:
ORA-12514: TNS:listener does not currently know of service requested in connect
descriptor
I have checked listener.ora and tnsnames.ora. they both are unchanged.
[Code]...
Currently I am installing oracle 10g release 2 with Red hat Linux 4.I am getting the following error.
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/home/oracle/oracle_10.2/network/lib/ins_net_client.mk'. In forum I saw this kind of post and I did all the steps, then also getting the error.
In the about last 2 weeks is available an update for VirtualBox OSE, but it fail every time.The final error is "transaction empty" on the gui of the updater.Trying to solve I put the commands suggested by yum (--skip-broken and rpm -Va --nofiles --nodigest) with no luck.
View 4 Replies View RelatedI have installed oracle-xe-univ-10.2.0.1-1.0.i386.rpm in my system but im unable to open the database home page please suggest me to how to rectify the problem. Im using fedora15 32 bit OS with gnome, i have installed it by just right clicking the file and selecting the option "open with software installer" then it automatically installed the software and i can see the icons of oracle in applications but when i tried open the "go to database home page icon" the home page is not displaying in the browser and displaying the following message "Unable to connect Firefox can't establish a connection to the server at xxx.x.x.x:xxxx. If your computer or network is protected by a firewall or proxy, make sure that Firefox is permitted to access the Web."
View 3 Replies View Relatedi always run updates if i get prompted about it... this time i ran a couple or so updates and software updates and restarted, i realise my VirtualBox and Wine isn't running at all... i click on the icons but nothing fires up.. all my programs on Wine seem to fall under the same issue...
how do i view all the latest updates i just installed?
After updating to kernel-2.6.33.6-147.fc13.x86_64 (and updating all kmods) VirtualBox guests no longer boot.
I had a Windows guest (from now on refereed as Crapdows) that worked normally. After the update, I could get to the "Start Windows Normally" screen, but then Crapdows refused to boot. At first, I thought it was a crappy M$ bug, but after creating another VM (Doublecrap), and starting from scratch, I was able to get to the "Windows is loading files" screen, and then the guest hangs again.
This problem is generalized to all OS'es I've tried. In Ubuntu, I can get to the language selection screen before the installation freezes. The same applies for Fedora and SUSE guests.
Is it time to get my hammer?
I am running Fedora 12 on an Intel Core 2 Duo system.
I ran a software update which installed a new kernel (2.6.32.23-170.fc12.i686.PAE) along with many other things.
I am now unable to run VirtualBox which I had installed and running successfully before the update.
I tried removing and reinstalling VirtualBox from YUMEX, and rebooting. This did not help.
When I launch VirtualBox from a terminal, it produces the following output:
VirtualBox: supR3HardenedMainGetTrustedMain: dlopen("/usr/lib/virtualbox/VirtualBox.so",) failed: VBoxVMM.so: cannot open shared object file: No such file or directory
I'm not sure what it is complaining about. The files VirtualBox.so and VBoxVMM.so both exist in the /usr/lib/virtualbox directory.
What can be done to get VirtualBox working again on this system?
my error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
I tried installed Virtualbox but when I click on the icon "Oracle VM Virtualbox" it acts like its loading then the window in the task bar disappears and nothing happens, there were no errors on the install mind you.
View 9 Replies View Relatedafter install virtualbox i have this error when i try to run it.
GLib-GIO:ERROR:gdbusconnection.c:2270:initable_init: assertion failed: (connection->initialization_error == NULL) Aborted (core dumped).
I'm currently running VB 3.0.10 on Fedora 12 64 bit.
When I attempt to upgrade my current install to 3.1 I get the following:
I am somewhat puzzled as this is a upgrade from a stable installed version. I have confirmed I have libcrypto.so.8 . . . from what I can tell its part of the openssl package but I've got the most current so I don't know how to obtain the libcrypto.so.10 file to correct this issue.
I have downloaded latest version of sun vm virtual box foe Fedora 13 x64. After installing and creating a VM when I want to start vm I got this error. And when I enter this command on terminal :
/etc/init.d/vboxdrv setup
I get this error:
Code:
[root@localhost arash]# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
Log file:
Code:
[root@localhost arash]# cat /var/log/vbox-install.log
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
[root@localhost arash]#
I have Fedora14. I have added virtualbox repository. On going through virtualbox.org site, I learned that virtualbox-4.1 released. I tired to update by yum update on 19.0.2011. No new package. I tried to download it from virtualbox.org (VirtualBox-4.1 Fedora14-i386). It failed on 19.0.2011 giving message that link is not operational. Today i.e. on 20.07.2011, I tired once again yum update. No new package. I tried to download from virtualbox.org. download succeed but it did not installed giving error message regarding conflicting files. Till not in repository?
View 5 Replies View RelatedFor the past few days, the automatic GUI update has been crashing, complaining of a "Transaction error."
Here is the output that pops up in a separate window:
Code:
I tried the following:
Code:
And got the following (similar) output:
Code:
I very rarely use xfce and I don't quite know what exo is, but I'd like to fix this problem if it's not too involved.
Code:could not add package update for poppler-data-0.4.0-1.fc12(noarch)updates: poppler-data-0.4.0-1.fc12.noarch.
View 3 Replies View RelatedWhen i try to create a virtual machine using the Windows 7 Enterprise Evaluation iso file, everything goes as planned untill i click on the start button. when i click on it i get two error messages. the first: Failed to open a session for the virtual machine Windows 7. The virtual machine 'Windows 7' has terminated unexpectedly during startup with exit code 1. Kernel driver not installed (rc=-1908). The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. i have installed the DKMS package, but when i try to run the command stated in the error message, i get another error message in the terminal:
[code]...
i have to install the driver that is specified (vboxdrv) but i do not know where to find it.
I've AMD64 system with Ubuntu 11.04 installed. It's been rough ride for me to install oracle-xe-universal. I've already spent more than 2 days on this. Still unsuccessful.
1) First I downloaded the packages libaio_0.3.104-1_i386.deb and oracle-xe-universal_10.2.0.1-1.1_i386.deb
2) Then I ran
sudo apt-get install bc (ran fine)
sudo dpkg -i --force-architecture libaio_0.3.104-1_i386.deb (ran fine)
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
(gave me dependency error for libc6 (>= 2.3.2), I modified the control file to remove dependency and rebuilt the package) (now worked fine) Oracle xe is now installed. Then I tried to start the DB it started but it's HTTP client never started. So I decided to uninstall the oracle-xe=universal. None of the sudo apt-get remove oracle-xe-universal command's didn't worked for me. So i went for manual uninstallation directions as per oracle link.
I ran the following command-
--Manually uninstalling Oracle 10g--
sudo rm -rf /usr/lib/oracle /etc/oratab /etc/init.d/oracle-xe /etc/sysconfig/oracle-xe /usr/share/doc/oracle_xe /usr/share/doc/oracle_xe_client
Then I again ran the following command to install oracle-xe
sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.0_i386.deb
See below what I got as the output-
rocky@ubuntu:~/git/mygit/edas2/libaio$ sudo dpkg -i --force-architecture oracle-xe-universal_10.2.0.1-1.1_i386.deb
dpkg: warning: overriding problem because --force enabled:
package architecture (i386) does not match system (amd64)
[code]....
Even in applications menu I don't see the if oracle has been installed. So i conclude first time installation was ok but somehow http client didn't worked. After manual uninstallation, second installation didn't even loaded/installed the oracle-xe in init.d directory.
I tried to install VirtualBox 32 bit on my 64bit Fedora11 OS. I took the 32 bit version as I want to run a 32bit software. I collected all information I could get from other forums. That's what I did: I downloaded and installed [URL]
yum groupinstall "Development Tools"
/etc/init.d/vboxdrv setup
Now I got stucked with the error Qt WARNING: QGtkStyle was unable to detect the current GTK+ theme. I searched for qt or qgtkstyle on my system and found files containing both but don't know what to do here.
I opted to install my Linux Fedora distribution, in a SUN VM (Virtualbox). [URL] I have 2 questions:
My current max res available to select is 1024x768. Can I run at 1920x1200? My display indicated that it is 'Unknown'. I don't know if that is in on the deal, or not...
Second question: When installing VBOXADDITIONS_3.1.2_56127, I am getting the error: Building the VirtualBox Guest Additions kernel modules [FAILED]
If I am displaying the log correctly, it indicates: Makefile:23: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again.. Stop Pictures are located here, in the EVGA Linux forum: [URL] I am new to both Linux, and Fedora.
My mission statement: To run Linux using the Fedora distribution, in a VM window under Windows 7 64bit Ultimate, with the ability for scripting using Bash, with the Perl programming language installed, and use Apache Tomcat to monitor both apps, and various VM installs, on numerous Servers via the internet.
After 2 months away from Fedora i am using it again, and used yum update to update stuff, everything was running fine, downloaded stuff, but 2 of the 666 stuff to install got error, here is:
[code]...
I am new to Linux.
Currently I am installing oracle 10g release 2 with Red hat Linux 4.
I am getting the following error.
Exception Name: MakefileException
Exception String: Error in invoking target 'ntcontab.o' of makefile '/home/oracle/oracle_10.2/network/lib/ins_net_client.mk'.
In forum I saw this kind of post and I did all the steps, then also getting the error.
i am facing problem in installing oracle 10g R2 on rhel4 x86. following error is throwing while installation:-java.io.FileNotFoundException: /tmp/OraInstall2010-02-19_10-21-06AM/oui/instImages/images.properties (No such file or directory)
[code]....
I've just installed the Oracle Instant client using this: https://help.ubuntu.com/community/PHPOracle
The phpinfo() show me that oci8 is enable, but when I try to query that database I've got the following message:
PHP Code:
Code:
How to troubleshoot.