Ubuntu :: 10.10 64 Bits And Getting Error While Trying To Install Virtualbox
Dec 22, 2010I have an ubuntu 10.10 64 bits. I am getting this error while trying to install virtualbox
[Code]....
I have an ubuntu 10.10 64 bits. I am getting this error while trying to install virtualbox
[Code]....
I am wondering if I can install a 32 bits guest Windows XP in VirtualBox in my 64 bits Ubuntu Natty host? I need a 32 bits Windows to run some programs.
View 6 Replies View Relatedmy error when trying to run a VB (Virtualbox). Error as copied from error box. install the virtualbox-ose-modules package for your kernel and execute 'modprobe vboxdrv' as root. VBox status code: -1908 (VERR_VM_DRIVER_NOT_INSTALLED).
[code]...
I get this when trying to launch a VB after making one with wizzard.
Can I install Linux 32 bits on system 64 bits?
For example if I have cpu 64 bits, can I install ubuntu 32 bits?
If yes, all drivers will befor 32 bits, right?
when I reformat ubuntu, I use AptonCD to save packages and then restore them without downloading anything over again. what I want to know is: I have the 32 bits ubuntu installed and then I downloaded the 64 bits version. If i reformat to the 64 bits one, would the DVD saved aptoncd packages from the 32 bits work on the 64 bits installation?
View 4 Replies View RelatedI was trying to install VirtualBox from AUR [URL]... it wants libpng12, which is outdated and makepkg cannot install it. Whan should I do? Here is what happens:
[code]...
I'm quite new to linux and I recently (and courageously) upgraded the computer of my work from opensuse 11.0 32bits to opensuse 11.2 64bits.
Well, everything would be quite fine except that I still have some softwares 32 bits that have the 64 bits version available. I know that because, using YaST, I can see by the Installed software section that there are 'choices' of versions for some programs; these versions are 'i586' and 'x86_64', and many of them have the i586 version installed.
So, I wonder if there is some type of auto upgrade all programs which are i586 and have the matching x86_64 avaliable...
I just create a vm image with 2 CPUs to be used on a one CPU machine. it works great. Now, i am thinking about creating a 64 bits Redhat VM image to be run on my 32 bits machine. Is that possible?
View 2 Replies View RelatedI notice this in all my machines (32bits and 64bits).
View 1 Replies View RelatedI am having a rather odd problem on my Ubuntu 11.04 installation on a 32-bits Intel Core 2 Quad system. When I try to install packages that are not in the repositories, I keep getting the message " Wrong architecture 'i386' " in the Ubuntu Software Center. I have downloaded several packages for 32-bits systems and get the same error every time, for instance., with the Linux 32-bits Debian package for Teamviewer.
In addition to the PC, I have a laptop with an amd64, and I have transfered the pkglist from that machine to my PC to get the same environment. Could that cause any problems of the sort above?
I have Slack 13.1 64 bits. I compiled my Kernel 2.6.34.1 The Kernel has start normally but I found this message:
[Code]....
I am trying to install NS-2.1b9a in Fedora 8.0. I have already installed gcc-3.3 and made new link to the newly installed gcc. I used patch made for NS-2.1b9a (found in [URL]...-8-ubuntu.html) to install in Fedora 8.0. Now, when I run ./install I get follwoing error.
[Code]..
About 7 years ago I setup a Redhat system with 8 serial terminals and 8 serial printers, this is still running but I need to get another system running so the original can be taken down for maintenance. The printers are ancient Newbury data dot matrix wide carriage with 7 data bits receive 8 data bits transmit Xon/Xoff flow control. Now I remember setting the transmit and receive data bits as above but after 7 years can't remember where.
View 2 Replies View RelatedI installed recently Ubuntu 10.04 32 bits server CD to USB stick (EXT4). The target machine is an 500Mhz VIA Epia Pico-ITX equipped with 1Gb of memory. This x86 server will run one or two processes 24/7 actively in memory. Therefore not too many writes to disk, maybe once or twice a week editing config files. Also I compiled the latest vanilla kernel, 2.6.35.4 atm, and optimised for VIA C3. However I like to limit my question in this thread to limit disk writes on USB stick, please let me know if you know other good tweaks to apply I did not find (overlooked) here.
[Code].....
I tried to install ns2.27 on my Ubuntu 9.10 64-bits version. I downloaded the gcc-3.3...amd64.deb instead of the one you recommend. When installing the debian files, I get this at the terminal
[Code]....
I don't see any errors but the file is not installed (I think) because when I go to synaptic they are not there. And trying to proceed with the ns2 installation results in error since I don't have the gcc3.3
how I can install truecrypt on Opensuse 11.2 32 bits. I've made a search trough Yast and the opensuse 1-click install website but could not find any package for truecrypt.
Is there an alternative way to install with software? so any solution that does not fall into the category of Yast or web-based installation of packages will be exotic for me
I know it's a very common problem but I didn't find any easy solution to install adobe air on debian testing 64 bits? I thought Adobe would release official 64 bits packages but it is not done yet... Impossible to find any unofficial packages from the community either?
In my case it would be to install Tweetdeck!
I was trying to install openSUSE 11.2 64 bits from the second partition of my 8GB USB pendrive.
Why? I want a dual data / emergency install pendrive without mixing my data with the install system.
As most people use MS Windows, and it's only able to mount the first partition of USB removable drives (without installing an alternative USB disk driver), I need the first partition to be the data partition for normal pendrive use.
Ok, I must say I've accomplished this with Ubuntu before without major problems.
Well, as of now, I've copied the ISO image contents to that second partition, installed Grub4DOS in the MBR with its corresponding custom menu.lst file, and made bootable the second partition.
When booting my system from the pendrive, the kernel was loaded without problems, but the boot process stopped with a message indicating that there was no device with MBRID = 0x8c71ad6e.
Ok, I ran fdisk from Linux and diskpart from Windows, and find the MBRID for my PenDrive is 0xed196ecb.
I've modified the /boot/grub/mbrid file with the actual pendrive MBRID, but the system refuses to boot with the same error (and with the correct MBRID).
Is it possible that the install system is only able (is hardcoded) to boot only from the first partition?
how to install flash player 64 bits rhel6
View 2 Replies View RelatedI have the windows 7 installed and I want to install the Ubuntu . Has anyone done that and does it work?
View 10 Replies View RelatedI want to know what's different between Fedora 32 bits and 64 bits.
Also, I want to know if I want to run 64 bits of Fedora, what do I need ?
just in case: My CPU is "Intel(R) Core(TM)2 CPU 6400 @ 2.13GHz"
I was trying to install VirtualBox through the YaST > Software Management but it is not working, someone in the forum told me that I have to download the OSE version and do it manual way. Finally I am able to start up VB but not able to use the network connection. Thus I am trying to do this:
/etc/init.d/vboxdrv setup. I get this error:
[code]...
When I type dmesg, it shows me a bunch of info which I don't know what should look for. When I type modprobe vboxnetflt, I get the error: FATAL: Error inserting vboxnetflt (/lib/modules/2.6.37.1-1.2-default/updates/vboxnetflt.ko): Invalid module format. what should I do in order to get my VB to be able to connect to the internet?
I am trying to build a chroot to have 32bits application on a amd64 arch. but when I try the debootstrap command i get this error that I am unable to get through; here it is: debootstrap --verbose --arch=i386 sid /var/chroot/sid-ia32 I: Retrieving Release E: Invalid Release file, no entry for main/binary-i386/Packages
then i tried this solution: [URL] and i progressed but stopped again at one error: E: can't find checksum for packages file.
I was bored and decided to put ubuntu 4.10 on my virtualbox. but during the installation, this happened:
I gave it 256 MB RAM and a 20 GB Virtual Hard Drive.
I'm using Virtualbox to test Meerkat. I have the same problem with Ubuntu & Xubuntu,
Here is the output from VBoxLinuxAdditions-x86.run..
Here's the last few lines from vboxadd-install.log..
I'm using the Virtual box on Ubuntu which has Windows XP on it. Probably after WinXP was automatically updated, I started getting an error message: "DLL C:WINDOWSsystem32DNSAPI.dll is not a valid windows image." and I cannot log on anymore. I tried to find a solution but since I'm using the Virtualbox, I don't know how to access the virtual "Windows folder" from Ubuntu
View 7 Replies View RelatedI have a gnome 11.4 64bit. I want to install VirtualBox-4.0-4.0.12_72916_openSUSE114-1.x86_64.rpm in my system and I get this error:
Code:
error: Failed dependencies:
initscripts is needed by VirtualBox-4.0-4.0.12_72916_openSUSE114-1.x86_64
I have installed Zimbra 6.0.1 and updated to Zimbra 7.1.0, the problem is that it needs the glibc-2.10 to start one of its services. I tried everything but i'dont get to update the glibc.
View 1 Replies View RelatedTrying to run windows only apps. I installed Wine first from software center. Most progs I try to run only give me the 'working' icon for 20 seconds then nothing. I did modify properties to allow .exe to run. I Dl'ed & installed the VirtualBox package w sw center and same deal- nothing. No error messages or anythng.
Running Ubuntu maverick. My Cpu is a compaq presario laptop CQ50, dual core intel T3200. Not the best but should at least start the progs yes?
Can't really troubleshoot as I have no feedback at all.
I have a Debian 8 and i installed virtualbox via this command
Code: Select allapt-get install linux-headers-$(uname -r|sed 's,[^-]*-[^-]*-,,') virtualbox
When I want to install Windows 8 on my virtualbox i get this error
Code: Select allVT-x/AMD-V hardware acceleration has been enabled, but is not operational. Certain guests (e.g. OS/2 and QNX) requireat y this feature. Please ensure thou have enabled VT-x/AMD-V properly in the BIOS of your host computer.