OpenSUSE :: VirtualBox: Error Inserting Vboxnetflt: Invalid Module Format
Jul 29, 2010
i installed SLES 11 sp1 as guest on openSUSE 11.3 host, then change the adapter network from 'NAT' to 'Bridged Adapter', but when i hit start i got this error message: Failed to open a session for the virtual machine sles. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). Failed to attach the network LUN (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). but when run: sudo /etc/init.d/vboxdrv setup
[Code]....
View 2 Replies
ADVERTISEMENT
Jan 10, 2010
I have a problem with loading the powersaving kernel module p4-clockmod.ko. When I try inserting the module (via modprobe or insmod) I get FATAL: Error inserting p4_clockmod (/lib/modules/2.6.31.8-mediaserver/extra/p4-clockmod.ko): Invalid module format The module has been compiled together with the kernel. Other modules load with no problem at all. I've tried recompiling the kernel (after re-installing the sources, make xconfig from scratch) - no avail. There's only one kernel source package installed. Searching the forum and google didn't yield a helping answer.
View 9 Replies
View Related
May 24, 2009
I'm new to openSUSE and as a matter of fact, to linux too. I've got a Linksys WUSB600N wireless adapter which used to work fine with some live versions of linux that I was testing out before moving onto suse... Each time, upon booting using live CDs, I used to copy the driver I had downloaded from:
SpeedShare - Download rt2870-kernel-2.6.24-nemesis.tar.bz2
Then 'make' and get into the driver's os/linux directory to load the driver using 'insmod rt2870sta.ko' Now, upon doing a 'make' and 'make install', followed by the 'insmod rt2870sta.ko', I get the error saying:
insmod: error inserting 'rt2870sta.ko': -1 Invalid module format
I tried doing 'modprobe -rv rt2870sta' and didn't get any error messages. But while doing 'modprobe -v', this error shows up: insmod /lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko
FATAL: Error inserting rt2870sta (/lib/modules/2.6.27.7-9-default/kernel/drivers/net/wireless/rt2870sta.ko): Invalid module format
View 7 Replies
View Related
Mar 13, 2010
I'm having some troubles with nfsd in slackware-current. When I start the service, I get the following error messages: Quote:
WARNING: Error inserting sunrpc (/lib/modules/2.6.33-smp/kernel/net/sunrpc/sunrpc.ko): Invalid module format
WARNING: Error inserting auth_rpcgss (/lib/modules/2.6.33-smp/kernel/net/sunrpc/auth_gss/auth_rpcgss.ko): Invalid module format
WARNING: Error inserting lockd (/lib/modules/2.6.33-smp/kernel/fs/lockd/lockd.ko): Invalid module format
FATAL: Error inserting nfsd (/lib/modules/2.6.33-smp/kernel/fs/nfsd/nfsd.ko): Invalid module format
The mount fails from the clients with the error message: Quote: mount.nfs: access denied by server while mounting jupiter:/media/Backup A look at syslog from the server side gives: Quote: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel) mountd[28198]: getfh failed: No such device kernel: exportfs: exports duplicate symbol exportfs_decode_fh (owned by kernel)
View 3 Replies
View Related
Jun 1, 2009
When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
View 3 Replies
View Related
Mar 4, 2011
I successfully built the sources for 64 bit linux drivers from [URL].... on the 64 bit F14 machine: Linux localhost.localdomain 2.6.35.6-45.fc14.x86_64 #1 SMP Mon Oct 18 23:57:44 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux and got wl.ko:
[Code]...
View 2 Replies
View Related
Sep 7, 2010
I am trying to compile the Cisco vpnclient on my Opensuse 11.2 and (after some troubles) I got the module compiled and installed but when I try to load with insmod I got this error
<</etc/init.d/vpnclient_init start
Starting /opt/cisco-vpnclient/bin/vpnclient: insmod: error inserting '/lib/modules/2.6.31.12-0.2-default/CiscoVPN/cisco_ipsec.ko': -1 Invalid module format
Failed (insmod)>>
I am able to use the vpnclient forcing the module with modprobe -f cisco_ipsec but I'd prefer to solve the 'invalid format' original problem. I 'googled' around and it seems related with this warning during vpn_install script "WARNING: Symbol version dump /usr/src/linux-2.6.31.12-0.2/Module.symvers is missing; modules will have no dependencies and modversions." I have these rmps:........
View 2 Replies
View Related
Feb 22, 2010
What is the error "invalid module format" and the message "insert kernel module" mean? And whats the reason for the same?
View 8 Replies
View Related
Mar 24, 2011
I am running Red Hat with 2.6.18-194.8.1.el5PAE kernel version. I am trying to run encryptfs to encrypt a partition on my hard drive. One of the kernel modules necessary is the md5.ko. I noticed it wasn't loaded in when doing an lsmod. I tried running modprobe md5 and it fails to load:
[root@ ~]# /sbin/modprobe -v md5
insmod /lib/modules/2.6.18-194.8.1.el5PAE/kernel/crypto/md5.ko
FATAL: Error inserting md5 (/lib/modules/2.6.18-194.8.1.el5PAE/kernel/crypto/md5.ko): Invalid argument
I ran dmesg and grepped for md5, but I didn't see anything in there.
View 1 Replies
View Related
Jun 22, 2011
With hello kernel module, i use two types of Makefile, one is using kernel build system:
obj-m += hello.o
all:
make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules
module loads successfully; another is using (CC) and then creating the module by "make -C /lib/modules/$(shell uname -r)/build M=$(PWD) modules", this module gives the error message when it is inserted, .........
View 5 Replies
View Related
Jan 20, 2010
I've got a brand new Advantech USB 4761 Digital/Analog PC Lab card. They claim to run under Linux. The install, " dpkg -i advdaq_1.04.0006-1_i386.deb", was successful. But when I tried to modify and run their install script, "adv_load_template", I get this:./adv_load_templateinsmod: error inserting './modules/advdrv_core.ko': -1 Invalid module format insmod: error inserting './modules/usb4761.ko': -1 Invalid module format
View 1 Replies
View Related
Apr 18, 2010
I am using reliance zte modem ac2726.i inserted the modem in my laptop and tried wvdialconf command and it was working.but when i type
Code:
modprobe usbserial vendor=0x19d2 product=0xfffd
command it shows the following error message
Code:
FATAL: Error inserting usbserial (/lib/modules/2.6.29.4-167.fc11.i686.PAE/kernel/drivers/usb/serial/usbserial.ko): Invalid module format
But "cat /proc/bus/usb/devices","lsusb","dmesg" everything are working perfectly."Wvdial.conf" file also got configured perfectly.what can i do now?
View 3 Replies
View Related
Jan 25, 2011
A little background first: Wireless card: Broadcom BCM4312 Wireless driver used: [URL].... (and slackbuild variation of the same)
GFX card: nVidia geForce 7150m I installed Slackware yesterday, along side my Ubuntu (yes yes, I use Ubuntu lol. I've been using it for about four years, I added Slackware to grub.cfg, using the OS prober, which added four menu entries. The first two caused kernel panic, the third worked, and I don't think I tried the fourth. (I'm pretty sure they were, in this order: generic, generic-smp, huge, and huge-smp). Using huge, I could not modprobe my wireless driver, I would get a "Invalid Module Format" error with wl, and when installing the nVidia drivers (from their site), I would get:
[code]....
I then booted using a menuentry my friend gave me, created my initrd, and everything worked fine, both graphics and wireless (mostly fine). So I upgraded to -current, kernel 2.6.35.10, and I started getting the same errors as before, 'Invalid Module format' and the same thing with the nVidia drivers, although this time, it happens regardless of if I use the generic kernel, or the huge kernel. I've done heaps of Google'ing around, and nothing I found worked.
View 8 Replies
View Related
Jan 31, 2011
I am having a problem while inserting a particular module.
Following are some prints :-
I am using STLinux-2.4 Distribution, kernel 2.6
I have changed the access permissions on all the .ko as rwx. Still I am getting the problem.
View 2 Replies
View Related
Jan 16, 2010
insmod: error inserting 'kernel.ko': -1 Invalid parametersI am getting this error when i am try to insert kernel.ko into kernelMy systemfedora 12 with gcc 4.4.2insmod kernel.koinsmod: error inserting 'kernel.ko': -1 Invalid parametersmy program
__________________kernel.c________________________ ___________
#include <linux/module.h> /* Needed by all modules */
#include <linux/kernel.h> /* Needed for KERN_INFO */
[code].....
View 4 Replies
View Related
Apr 15, 2011
I am tiring to insert a parallel port module into the kernel when i received this error.
[root@localhost paralelport]# ls
a.out light.c Module.markers parlelport.c parlelport.mod.c parlelport.o
light Makefile Module.symvers parlelport.ko parlelport.mod.o
[root@localhost paralelport]# make
make -C /lib/modules/2.6.18-128.el5/build M=/home/backup/parallal/paralelport modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-128.el5-i686'
[Code]...
View 1 Replies
View Related
Aug 16, 2011
Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
View 4 Replies
View Related
Dec 13, 2010
We are using LPC3250 ARM9 and LTIB for building the Linux 2.6.27.8 We have written some code to access GPIO and was working earlier with opensuse 9.0 We now have fedora 11 32 bit 2.6.30.10-105.2.23.fc11.i686.PAE When we make the program we get following errors we are using GCC3.4.5
#make -C /lib/modules/`uname -r`/build M=`pwd` modules
make -C /home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8 M=`pwd` modules
make[1]: Entering directory
`/home/shekhar/lpc3250/ltib/rpm/BUILD/linux-2.6.27.8'
CC [M] /home/shekhar/samsung_lcd/gpio/char.o
cc1: error: invalid option `64'
[code]....
View 1 Replies
View Related
Jun 25, 2010
I've searched all over the internet and have found numerous threads on this topic, none of which have helped me fix the problem. I'll post as much info I can about my setup.I have 3 hard drives... one is for ubuntu (9.10), one is for my data, and one is for Windows7. It looks like this:
1st drive (hda) = ubuntu
2nd drive (hdb) = data
3rd drive (hdc) = windows
[code]....
View 6 Replies
View Related
Apr 4, 2009
I have installed win xp(sda1) win 2003(sda2), centos 5 (sda7) and mint 5(sda5) on 4 partitions and swap (sda6).All OS work fine except centos 5. When from the boot menu I choose Centos 5, I get the following error:File system type is ext2fs, partition type 8x83.Kernel /boot/vmlinuz 2.6.18.92.el5xem root/dev/sda7Error 13 invalid or unsupprted excecutable formatBut I 'm sur that I have format /dev/sda7 as ext3
View 2 Replies
View Related
May 16, 2010
I've been googling all afternoon to fix this error I get. The situation is as follows: I have multiple harddrives (3x320gb and 1x160gb) all on the SATA interface. One of these drives contains Windows, and the rest I use for programs and downloads. I've installed Ubuntu 9.04 from a USB-stick using the installer's partitioner to make some room for Ubuntu (Ext4 filesystem). I've tried Ubuntu and SUSE in the past.
View 1 Replies
View Related
Aug 4, 2010
Ubuntu 9.04 server (64bit)
8GB
(2) 320 WD HDD - RAID 1
After coming home one evening I found my server was turned off. My suspicions lead me to believe we had a storm and the power went off, then the UPS went off and finally at that point the server went off too. I think my server was set to allow security updates. After it turned of and restarted it seems it made a change to Grub and upgraded it to Grub2. In doing so I now get the following message:
Error 13: Invalid or un supported executable format
I have tried to do the following:
url
This solved the problem for me, from > url
Quote:boot from the live medium and chroot into the Linux installation:
$ sudo mkdir /mnt/linux
$ sudo mount -t ext4 /dev/sda1 /mnt/linux
code....
Then, the following command should resolve the issue. :
$ sudo grub-install --recheck /dev/sda
View 4 Replies
View Related
Jul 18, 2011
suddenly after upgrade
2.6.38-10-generic-pae ===> Error 16: Incosistent filesystem structure
2.6.38-10-generic-pae (recovery mode) ===> Error 13: Invalid or unsupported executable format
2.6.38-10-generic ===> Error 13: Invalid or unsupported executable format
[code]....
b08e48b7-1194-49c1-a743-91e7ee90334e is a link to /dev/dm-2 which is my root partition on nvidia raid
PS: At first it did not boot at all dropping out to grub shell, but I managed to boot it with gparted live usb stick and chroot to Ubuntu and re-install grub, but now 2.6.38-8 kernel works and 2.6.38-10 is not
View 1 Replies
View Related
Jul 22, 2010
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
code....
View 3 Replies
View Related
Jul 22, 2010
A few days ago I booted up my computer as normal and loaded vista. It loaded fine, but then froze at the login window. I restarted my computer but this time when I tried to load vista I got the "Error 13" message. Ubuntu still loads up fine however.
I'm fairly certain that I'm using Grub - Legacy, and since most posts that I see post the contents of the menu.lst file, I will too
Code: # menu.lst - See: grub(8), info grub, update-grub(8)
# grub-install(8), grub-floppy(8),
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.
[Code]....
View 7 Replies
View Related
Apr 16, 2011
Reluctantly I made a temporary install of XP as follows Remove linux drive and install a wiped drive.format ntfs & install windows xp (w/sp3)shift ntfs drive to slave, replace linux drive as master and xp drive as slave. Add it to grub as follows:
Code:
# boot=/dev/sda1
default=1
timeout=5
splashimage=(hd0,0)/grub/splash.xpm.gz
titlem$ Windows XP
code....
View 1 Replies
View Related
Sep 13, 2010
I've been playing around with trying to assemble a bare-bones Linux system on a disk.img file through a loop device. I compiled the most recent stable kernel and then copied it onto the root partition in the image. When I try to boot up into the image using qemu, grub gives me this:
Code:
Booting 'tiny'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinux
Error 13: Invalid or unsupported executable format
Press any key to continue... I am confused because I compiled the kernel with 'make bzImage', and the architecture hasn't changed (qemu on the same machine used to build the kernel). So it should be bzImage format. Is that what this Error 13 means, or could it means something else is wrong...?
View 1 Replies
View Related
Jun 13, 2010
I have downloaded latest version of sun vm virtual box foe Fedora 13 x64. After installing and creating a VM when I want to start vm I got this error. And when I enter this command on terminal :
/etc/init.d/vboxdrv setup
I get this error:
Code:
[root@localhost arash]# /etc/init.d/vboxdrv setup
Stopping VirtualBox kernel module [ OK ]
Recompiling VirtualBox kernel module [FAILED]
(Look at /var/log/vbox-install.log to find out what went wrong)
Log file:
Code:
[root@localhost arash]# cat /var/log/vbox-install.log
Makefile:159: *** Error: unable to find the sources of your current Linux kernel. Specify KERN_DIR=<directory> and run Make again. Stop.
[root@localhost arash]#
View 13 Replies
View Related
Aug 31, 2011
I have a weird problem with one of my servers (normal PC hardware). I was connected remotely using Putty, doing some stuff, and all of the sudden some commands, like "ls" stopped working, giving a "file or command not found" type of message. I restarted the ssh session, only to find out I couldn't log on any more (access denied). When I got home and rebooted the system, I was greeted with this:Booting 'CentOS (2.6.18-194.el5xen)'root (hd0,0)Filesystem type is ext2fs, partition type 0x83kernel /boot/xen.gz-2.6. 18-194.el5Error 15: File not foundPress any key to continue...Then I searched about this, found out that the files in /boot/grub/menu.lst did not exist at the specified location (/boot/xen.gz-2.6. 18-194.el5). Somehow I managed to find them in another place, copied them in place, and now I get:Error 13: Invalid or unsupported executable format
View 3 Replies
View Related
Jun 16, 2010
I am running Lenny and using VirtualBox OSE 1.6.6. In order to try squeeze I installed it in a VM. I tried to install Guest Additions also, but i get this error:
VirtualBox 1.6.6 Guest Additions installation
Building the VirtualBox Guest Additions kernel module...
Building the shared folder support kernel module...
Unable to build the kernel module.
I checked what /var/log/vboxadd-install.log had to say:
/usr/src/linux-headers-2.6.32-5-common/include/net/neighbour.h:115: error: variably modified a at file scope
/tmp/vbox.0/utils.c: In function 'sf_path_from_dentry:
[code].....
I tried with 3 versions of the kernel 2.6.32-5-686,2.6.32-5-484,2.6.32-3-686 but I cannot get it to work using any of them. Also I tried to install version 2.6.30-2-686 but I couldn't since synaptic said that it Depends: linux-kbuild-2.6.30 but it is not installable.
View 3 Replies
View Related
