Ubuntu :: 10.4 Studio Installation Hangs At Scanning Disks
Jun 1, 2010
I have downloaded ubuntu studio 10.04 from torrent file available in ubuntu studio site.
1.Now I tried to install it directly from the iso as described here. It showed an error 'Can't mount the cd-rom' that is it couldn't mount the iso automatically.
2.Creating startup disk on my Seagate external hard disk (NTFS) didn't work out as 'Make startup disk' was greyed out.
3.Then I tried to install the OS from a pen drive. It proceeds fine until it hangs at 45% scanning disks in setting up the partitioner. I have waited for about 15 mins, but nothing happened.
View 2 Replies
ADVERTISEMENT
Feb 22, 2011
I tried to install Ubuntu 10.10 Server 32bits and 64bits but each time the installer stopped at 45% during "Starting up the partitioner" with the message "Scanning disks".
I installed Windows 7 64bits on the disks without problem.
I installed IPCop 1.4.20 successfully.
However, I tried to install Fedora 14 32bits and 64bits but it also stopped (ie crashed the partitioner) during the "Install To Harddisk" via LiveCD.
Similarly, OpenNode 1.0 also crashed with a bug report that has alot of python error messages. All mean nothing to me.
I even tried to partition the disks first via Fedora 14 LiveCD. Still the same thing.
Has anyone encountered this sort of problems before? If so, any resolutions?
Could this be the problem with the SATA2 disks?
View 7 Replies
View Related
Dec 11, 2010
I've been attempting to install 32-bit Ubuntu 9.10 on my Dell Studio 1749 with the intention of making a dual-boot system. Attempting to install with a live CD using the default settings, I got as far as pressing ENTER on "Install Ubuntu" before the screen went completely black. The CD drive spun wildly, but nothing ever appeared on the screen. I tried the fix detailed here:
http://bennybeta.blogspot.com/2009/1...udio-1555.html
typing "nomodeset" as an option, and using the "apic=off" option. When I did this, I was no longer greeted with a blank black screen, but instead with a blinking cursor, but the installation still hung. The keyboard was unresponsive and I could not open a terminal. I also tried using the alternate installer instead, and got the same results.
After this, I tried installing using wubi, and on boot I get exactly the same results: black screen without "nomodeset" and a blinking cursor otherwise.
I should also mention that the same thing happens for every option on the installation screen, including the option to "try ubuntu" by booting from the CD.
Does anyone know what could be causing this issue, and how I might install ubuntu on my machine?
View 1 Replies
View Related
Apr 16, 2011
I'm currently trying to install ubuntu but the installation process hangs on the second page of the installation (right after select language) I am booting from a usb. NO other OS is installed and I'm currently in "try it now" mode.
View 4 Replies
View Related
Jan 9, 2011
I'm currently using Ubuntu Studio Lucid and would like to use Ubuntu Studio Maverick, but I'm unsure how to go about the upgrade. Should I upgrade to generic ubuntu maverick then upgrade to ubuntu studio? Or install ubuntu studio maverick from a DVD?? Or something else?? I should say that I have a separate /home partition.
[Edited because what I first wrote was confusing:] when I started the process of upgrading with Update Manager it said that quite a lot of things would be removed (it would be upgrading only to generic Ubuntu for one thing)---I aborted that by the way. I was wondering if anybody knew of a way to avoid having to first sort of note everything that I have installed, then do the upgrade to generic Ubuntu, then do an upgrade to Ubuntu Studio, then reinstall all of the apps in their newer versions. Might there be a way to upgrade the OS itself first and then just directly update the apps without having to reinstall them, figuring out what to install all over again too?
View 3 Replies
View Related
Jun 6, 2010
After installing slackware 13.1 I start up amarok and when I go in and configure the settings and it starts to scan the folder and it either hangs at 10%, stops responding all together or crashes, the library is about 130 gigs of mp3s. I do not know where to start on this one. Amarok version 2.3.0
View 4 Replies
View Related
Mar 31, 2010
I have Dell Studio 540 desktop and Debian Lenny installed on it:
2.6.26-2-amd64 #1 SMP Tue Mar 9 22:29:32 UTC 2010 x86_64 GNU/Linux
The problem is that I can't reboot it. It just hangs after "Will now restart" message.
I've already tried: reboot=b, reboot=a, reboot=h kernel options.
Additional info (I can provide any other information):
lspci
00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03)
00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03)
[Code]....
View 6 Replies
View Related
Jul 6, 2010
I was trying to install openSUSE 11.2 on Dell XPS Studio, model PP35L, but loading kernel hangs at 94%, I tried F5 for Safe Settings, No APIC, No Local ACPI, Check Installation Media, but it still hangs at 94%. Installation works fine on older computer. Is it because openSuse kernel doesn't recognize the i5 Core processor yet? If this is caused by a driver, is there a way to display the kernel messages and what would be the kernel boot options to disable loading of that driver?
View 2 Replies
View Related
Mar 31, 2010
I have/had a PC with several hard drives, and a mix of ubuntu and windows on multi boot.The old boot drive died screaming, and I need to start again. (But my data is safe! yay!)
Is there anything special about which drive can be the main drive to start booting from? Or to put it another way, can I install to any of the other 3 and expect it to work, or do I need to switch them around so a different drive is on the connections for the recently dead one?
View 2 Replies
View Related
Jul 6, 2010
I wanted to use an older computer again, so I tried to fire it up, but alas. I don't recall when the last time was that it was running, but I don't think it didn't run back then. I just had a new computer
[HARDWARE]
- MOBO: ALiveNF6G-DVI
- BIOS: BIOS P1.30
- CPU: AMD Athlon 64 X2 4800+
[code].....
[PROBLEM] What happens is this:
1. The computer starts up. No POST-beeps.
2. CPU is ok.
3. RAM is ok.
4. Disks are auto-detected and listed.
5. Then the computer halts. No message, no warning. I am not even able to hit control+alt+delete (I say this, cuz I noticed this. I am able to run and alter the BIOS in an earlier state of booting up, with the keyboard, obviously). It just completely hangs/locks.
[WHAT I HAVE TRIED SO FAR]
1. Removing all hardware but monitor, RAM, keyboard. - Result: comp stops doing stuff after checking RAM, without any message whatsoever.
2. Cleared the CMOS (with the jumper, also by removing the battery). - Result: no changes.
3. There are two pieces of RAM. I removed them all. Result: POST-beeps. I put one back: loaded till after disks. See above. Exchanged the RAM-piece with the other RAM-piece (so: still one piece of RAM): same thing.
View 7 Replies
View Related
Aug 10, 2010
i want to upgrade to ubuntu studio from ubuntu i found the link saying how to do that before but i cant find it again
View 3 Replies
View Related
Apr 28, 2011
I am currently running Ubuntu studio 10.10 and I love it, but I added some of the stock ubuntu repositories for software sources. now my upgrade manager is asking me to update to ubuntu 11.4. I am tempted to but I dont know how safe it is.
View 2 Replies
View Related
Nov 8, 2010
I just removed my previous linux install and installed Ubuntu Studio because of the nicer look.However the login screen is still the borin plain one. I have been to the "Login Screen" and tried to select theme as mentioned but it doesn't have any tabs or info for it.
View 4 Replies
View Related
Jul 10, 2011
I'm a new to ubuntu / trying to install (build?) synfig studio in ubuntu 11.04. I've read the info from the download pages, have searched forums but nothing seems to apply to the year 2011 and ubuntu 11.04 OR my v. low level of expertise.
View 2 Replies
View Related
Aug 21, 2011
Has anyone tried that? I have a Dell Studio 1555 running 64-bit Ubuntu 9.10 for about 2 years with almost no issues but I plan to upgrade it straight to 11.04 64-bit (using fresh install because I also want to format the HDD and partition it in a different way).
What I'm reading in the web is though a bit discouraging as there seem to be a lot of issues with 11.04 running on this particular Dell model. Quite a shame as Dell is supposed to provide good experience on Linux since they had been selling laptops with Ubuntu preinstalled (or they used to...).
View 2 Replies
View Related
Feb 25, 2010
I have servers which contain SATA disks and SAS disks. I was testing the speed of writing on these servers and I recognized that SAS 10.000 disks much more slowly than the SATA 7200. What do you think about this slowness? What are the reasons of this slowness?
I am giving the below rates (values) which I took from my test (from my comparisons between SAS 10.000 and SATA 7200);
dd if=/dev/zero of=bigfile.txt bs=1024 count=1000000 when this comment was run in SAS disk server, I took this output(10.000 rpm)
(a new server,2 CPU 8 core and 8 gb ram)
1000000+0 records in
1000000+0 records out
1024000000 bytes (1.0 GB) copied, 12.9662 s, 79.0 MB/s (I have not used this server yet) (hw raid1)
[Code].....
View 3 Replies
View Related
Feb 19, 2010
I recently installed ubuntu studio 8.04 on a new partition and now ubuntu 9.10 is no longer showing up in the grub boot menu. How can I boot into ubuntu 9.10 and how do I edit the grub menu so it shows up again?
View 5 Replies
View Related
Sep 29, 2010
I am a software developer, presently porting a game engine from Visual Studio to GCC. I'm working on LTS 10.04. The project uses C++ lambdas, and I really would like to keep it this way. Therefore, I need GCC >= 4.5 to compile it.
I wouldn't like to reinstall entire OS, or to have to manually update this single program every time. Is there an option to update it from 10.10 repositories, pointing out, that I need only this package (and it's dependencies)? Or is there any PPA that does the trick for me?
Generally, the entire packaging system of Ubuntu rocks, as long as I can find up-to-date PPAs of all packages I need to have in recent versions (like mono).
View 3 Replies
View Related
Oct 28, 2010
I deleted my Ubuntu Desktop Partition to replace it with Ubuntu Studio but when I went to restart the computer and command line thing about how the Ubuntu Partition is missing is showing up. How do I get it to boot to Windows?I'm currently booting from my emergency Xubuntu USB Stick.
View 2 Replies
View Related
Jan 29, 2010
I have been using ubuntu for a little while so i'm not a total newbie. But im not very confident with installing the latest verion of ubuntu studio. Previously i upgraded to ubuntu studio through the terminal window from Jaunty. This time i want to do a fresh install via a DVD. I tried earlier but the part im confused about is the partitioning and formatting process. I have 2 hardrives. One of my hard drives has my XP OS on it along with my entire life. So I cant afford to make a mistake. The other has an older 32bit version of ubuntu studio on it.
I have looked online but I havent found much help. What i was thinking of is just unplugging my windows drive, doing a fresh install on the other. But then i wouldnt know what to expect when i boot up and plug in the XP drive.
View 6 Replies
View Related
Feb 13, 2011
When I try to install Apache Directory Studio through eclipse 3.3.The procedure I follow: Go to help (Eclipse Interface)----> Software Updates ----> Find and Install When I press Find and Install nothing happens and eclipse becomes unresponsive.
View 2 Replies
View Related
Jun 3, 2010
i want to install ubuntu 10.04 on my studio 15 with i5 processor (already having win7 home ) in dual boot mode. i tried to install , it installed , but after restarting from second time onwards blank screen is coming and boot options are not coming , ERROR : no module found and with some values i tried for 4 times but unsuccessful , i did below steps
-my hdd is 320 so i separated 200(for win 7) , 50 (for personal ) , 40 unallocated for linux
-inserted ubuntu 10.04 rc1 CD
- in fourth step when selecting disk , i selected manual option(3rd)
- and i selected 40GB unallocated and formatted to ext4 and selected as root and install
- after reboot in boot options i can see 4 options i selected win 7 and from win7 i restarted
- after that black screen coming , boot options are not coming
View 1 Replies
View Related
Nov 3, 2010
I would like to know if someone was able to upgrade/fresh install ubuntu 10.10 maverick on a dell studio hybrid. First I've tried to upgrade. Everything went well, until the system started. First thing to notice is that the orange was so bright that was almost impossible to look at the monitor. Not a big deal, adjusting some monitor brightness etc. Second the mouse (usb) stopped for some fraction of a second, or a second, when you click to open a program. It is annoying but it is also a problem that I could wait to find some solution.
Third and worse, it was completely impossible to see videos in vlc or other players, I've tried vlc, xine, etc, the videos was stuttered, choppy. SMPlayer was able to play them better. I've tried the solution here [URL] and it does not work at least for me. Fourth the fans went completely crazy, running as mainly when I have to use smplayer, I've found some complains about that [URL] but the solution does not apply to my computer.
Then I've tried a fresh install hoping that some of the troubles would not appear. The only trouble solved was the look and feel. Mouse the same trouble, stuttered, choppy videos on vlc, fans running all the time. And now it was impossible to install the wireless proprietary driver Broadcom sta. The only solution was to come back to Lucid. A fresh install of Lucid and mouse working ok, no troubles seeing videos in vlc, fans working absolutely normal and no troubles to install the wireless driver.
View 1 Replies
View Related
Jan 18, 2011
Everything look great but I don't get how to connect to ethernet connection or how to turn on wireless. I always had automatic connection on ubuntu since 8.04. For now I'll look for some repository and download the "nt" applet manager.
View 3 Replies
View Related
Nov 3, 2010
I upgraded from Ubuntu Desktop 10.04 to Ubuntu Studio 10.04 and running a dual boot system with Windows. On the grub screen there are four listings now for Ubuntu. Two recover modes and two ubuntu modes. Is this normal? Going to reboot and see if I can get a picture of it.
View 3 Replies
View Related
Apr 9, 2011
I am attempting to install ubuntu 10.10-alternate-i386 that was burned on a cd.
Motherboard: SOYO SY-K7ADA v1.0-2AA1
Main Processor: AMD Athlon 1700+
Primary Master: WDC WD800AAJB-00J3A0 0.103E01
The HDD is brand new and hasn't been formated, partitioned, or previously had any other OS on it. The HDD is recognized in the BIOS.A list of possible drivers are listed in which don't match, except for two, but they don't lead to anywhere beneficial in order to complete the installation process.At this point, I have no idea how I must proceed.
View 9 Replies
View Related
Apr 29, 2011
I did a fresh install of 11.04. It didn't let me choose custom mount points for my disks, so I left non-system partitions unmounted in the installer. Big mistake. It seemingly screwed with two of my disks. I can see them in disk utility, but disk utility cannot identify partition information.
@fridge:~$ sudo mount /dev/sde1 /m2 -t ext4
mount: wrong fs type, bad option, bad superblock on /dev/sde1,
missing codepage or helper program, or other error
[code]....
View 9 Replies
View Related
Sep 1, 2011
Do the 11.04 disks available for download contain the latest, current, kernel release?
View 3 Replies
View Related
Oct 1, 2014
I'm creating a new debian virtual machine. As virtual disks are free, I want to use tree for my new machine. The scheme will be like this:
sda -> /boot
sdb -> /root
sdc -> swap
View 8 Replies
View Related
Feb 12, 2010
I've installed Windows 7 onto one hard drive, and then installed Ubuntu 9.10 onto a second hard drive. The installations seemed to go fine, and I can boot into Ubuntu from the GRUB menu. However when I try to boot into Windows from the GRUB menu, I get a message saying "error: no such device: 446e94786e946488".
View 9 Replies
View Related
