I was using the Slack 13.1, and when I change the mirror to Current and upgrade (and reboot after this) my Slackware stops in the Message "Loading Linux" and makes a million of beeps.
View 3 Repliesafter i update to -current 30 nov, inkscape cannot run. Code: inkscape: error while loading shared libraries: libMagick++.so.3: cannot open shared object file: No such file or directory and there are other error (friends of mine problem) inkscape in slackware. this is the error
Code:
(inkscape:9005): Gtk-CRITICAL **: gtk_misc_set_alignment: assertion `GTK_IS_MISC (misc)' failed Emergency save activated! Emergency save completed. Inkscape will close now. If you can reproduce this crash, please file a bug at www.inkscape.org with a detailed description of the steps leading to the crash, so we can fix it. Segmentation fault
I'm in a bit of a pickle here:
After upgrading to current, I lost my video ... On boot I see the console until missage like this code...
I have just updated current to get the new kernel and things seem to have gone just a little wrong.After upgrading i edited lilo.conf and ran all seemed fine so i rebooted to find my pc wont boot it cannot find modules and there will be trouble ahead it think it says (will check the error and add it).So i thought no problem i can just boot from an old disk i have laying around and fix it from there. I only had the 12.2 install disk or ubuntu 8.10 live cd neither of witch support ext4 which i stupidly decided to format my drives in.
Anyways i now have a ubuntu 9.10 disk and have booted and try to fix things but am miffed at whats going on. If i chroot into my slack root and look in my /boot there is only the old files before the update, but if i mount the drive in ubuntu there are the new files from after the update.What has happened and how can i fix it? It has just occurred to me i could use a tmp dir and copy the correct /boot files there then in the chroot copy them to /boot may work ?
I recently upgraded to -current from 13.0 on my Dell Inspiron 1525 Laptop. It seems to have strange problems since then. The X crashes after sometime if I am running a video in firefox (flash based, say .....) in the full-screen mode. When I am not in the full-screen, it seems to run just fine. A similar thread was posted a few days back (http://www.linuxquestions.org/questi...rashes-846796/) and I thought I had overcome the problem using one of the suggestions provided, but apparently, I just had not run full-screen videos ever since (and I thought it was solved!). code...
I should mention that, the crash happened when I was running a video chat on gmail in full-screen mode too. I have the Xorg.0.log for that too, if it is going to be helpful. Also, one thing I noticed was that even Ctrl+Alt+b_space does not work when this crash happens!! (so, I have to go ahead and reboot the system using the power button everytime) This I find very strange, since if at all, I should have been able to kill the process and restart X.
This seems to be an extraordinarily long thread, but I have put in whatever I thought could be useful info I should give. I will appreciate any help in resolving this issue.
After the last -current update, I couldn't launch ardour (with the SLV2 support). I obtained the following error:
Code:
/usr/lib/ardour2/ardour-2.8.11: error while loading shared libraries: librasqal.so.2: cannot open shared object file: No such file or directory I immediately tried the quick way of creating a symbolic link into the /usr/lib folder.
[Code]....
I am running Slackware64-current(multi-lib) and I have stumbled across something that I don't fully understand.I have read that the kernel-headers should not be updated as glibc is compiled against them and therefore requires that set of kernel headers. Recently the kernel version has been bumped a couple of times but glibc has stayed the same.Should glibc be re-compiled each time there is a kernel update?
Perhaps someone can explain, in very simple terms, the relationship between the kernel, the kernel headers, the kernel modules and glibc.
After the bunch of updates with current, my custom kernel (2.6.33) can't boot.
The error is:
/sbin/e2fsck: No such file or directory while trying to open /dev/sda6
The superblock could not be read or does not describe a correct ext2
filesystem. If the device is valid and it really contains an ext2
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate
superblock:
e2fsck -b 8193 <device>
The /dev/sda6 is ext4 and is ok since it can boot with official huge smp kernel 2.6.33.
My custom kernel can boot before this bunch of updates in current.
What i missing in kernel?
better to be ignorant now, than a lifetime ...What better way to update the aaa_elflibs "slackware-current" now?
View 9 Replies View Relatedpls delete this post if I should not do this as it is included in [URL]..How do I recover from the 99 error when I start my system? I can only get to my Slackware by booting into it from the Slackware DVD.I have re-run lilo but I keep getting the 99 error on start up.
View 10 Replies View RelatedI downloaded and installed beta1 a few days ago but have just noticed beta2 is now available. Do I need to download beta2 and re-install or will my current beta1 update to beta2 via update manager?
View 6 Replies View RelatedLost my wireless keyboard and mouse upgrading slackware current.Boot seems to be normal.I just can't login, cause have no keyboard.
View 2 Replies View RelatedI was updating my F12 and the system crashed .. no idea why.. anyway I cannot boot anymore using the kernel 2.6.31.9-174, but I can boot using the 2.6.31.6-166 ... now when I issue the yum update, the system says its up-to-date...is there any way to 'force' the yum to update the system again ?
View 14 Replies View RelatedMy system system suffers from frequent kernel panics, which I think are due to gnome-shell with the nVidia driver. (I see no panic message and nothing is logged, but I've enabled magic SysRq and it makes no difference.) Twice this has occurred during yum-update's install stage, which is making me wonder. Uum-update then complained about an unfinished transaction, so I ran yum-complete-transaction as suggested. I've also tried yum-clean-all and rebuilding the RPM database, suggested in other threads, but I'm still seeing the following errors on yum-update:
--> Finished Dependency Resolution
Error: Protected multilib versions: 1:cups-libs-1.4.7-3.fc15.i686 != 1:cups-libs-1.4.6-15.fc15.x86_64
Error: Protected multilib versions: libuuid-2.19.1-1.3.fc15.i686 != libuuid-2.19.1-1.2.fc15.x86_64
Error: Protected multilib versions: krb5-libs-1.9.1-5.fc15.i686 != krb5-libs-1.9-7.fc15.x86_64
You could try using --skip-broken to work around the problem
** Found 23 pre-existing rpmdb problem(s), 'yum check' output follows:
1:NetworkManager-0.8.9997-5.git20110702.fc15.x86_64 is a duplicate with 1:NetworkManager-0.8.9997-4.git20110620.fc15.x86_64
1:NetworkManager-glib-0.8.9997-5.git20110702.fc15.x86_64 is a duplicate with 1:NetworkManager-glib-0.8.9997-4.git20110620.fc15.x86_64
1:cups-libs-1.4.7-3.fc15.x86_64 is a duplicate with 1:cups-libs-1.4.6-15.fc15.x86_64
ibus-1.3.99.20110419-9.fc15.x86_64 is a duplicate with ibus-1.3.99.20110419-7.fc15.x86_64+ More errors of that ilk.
I don't know where these 32-bit packages have come from this is an x86-64 system and the only x86-32 stuff I've intended to install is the Adobe flash plug-in. Also the later dupes are different 64-bit versions. I've tried "package-cleanup --cleandupes" as suggested in this thread: [URL]. It wants to remove the old versions, but also wants to remove packages that depend on them, including clutter, so I cancelled that. The first time round I was left with a barely usable system and had to reinstall, which I'd rather avoid, especially if this is going to be a regular occurrence. I'm not familiar with RPM (or kernel panics for that matter).
i tried to load update manager, but a red circle with a line through it appeared next to my wireless signal bit, with the following code'E:Encountered a section with no Package:header, Eroblem with MergeList /var/lib/apt/lists/ppa.launchpad.net_teamxbmc_ppa_ubuntu_dists_maverick_main_binary-i386_Packages, E:The package lists or status file could not be parsed or opened.' then a grey shap appears next to it, saying report it to ubuntu, but when i press ok, it says it cant find the error to report. i upgraded to ubuntu 10.10 the other day just for the record
View 9 Replies View RelatedIt happened to me again, I guess I need to ignore those updates but somehow I forget each time! This time it froze in middle of update no mouse no kybd no cap/num locks light nothing so I hard booted after an hour of wait, now I cannot boot at all. I go thru Grub menu then it says press S to skip and M to manually load. In most cases nothing works but I got to the prompt and put the root password but I dont have an IP address and cannot get 1? I did fsck -p but no errors. It says the OS is not on / or has been gone?
View 2 Replies View Relatedslackware-current kernel 2.6.35.10-smp for instance if i just want to connect to wep ap. i done
[code]...
it says waiting for carrier and it just time out, im wondering why i read somwhere that its not working good with slackware 13.1
I recently upgraded to slackware-current from Slackware 13 via slackroll, and have only encountered one problem. My file manager no longer thumbnails images, and icons (mostly PNG) aren't appearing no matter what GTK theme is set. Running from the command line produces no errors, and when brought up in something else (say feh /path/to/icon.png) it works perfectly. This is the only hitch I have encountered so far. The same thing happens with emoticons in Pidgin. Does anyone know of a fix?
View 5 Replies View RelatedFirst time I've done this in awhile Upgrading my Slackware64 -current VM, following the standard routine that has always worked in the past -
Code:
slackpkg clean-system
slackpkg install-new
The clean-system removed 2 packages -
util-linux-ng
eggdbus
Installpkg will no longer work, complaining that the rev command is not found. The problem hit with the removal of util-linux-ng. I cp'd util-linux to ~/. Extracted with tar and executed the doinstall. Fixed.
KDE has shut down without message. Am in runlevel 5, was taken to login screen. I can start xfce, but if I attempt to login with KDE as the window manager, I am presented with the login prompt again. No error messages. where to start trouble-shooting.
View 14 Replies View Relatedafter update to slackware current 4 days ago i cant get sound working in wine in starcraf 2 i mean i got sound in instalation but not in game and i get error when i wanna configure sound in winecfg
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:ALSA_CheckSetVolume Could not find '{PCM,Line} Playback Volume' element
err:alsa:wine_snd_pcm_recover underrun occurred
err:alsa:wine_snd_pcm_recover underrun occurred
in game i dont got that error but sound dont work btw my sound card is asus xonar essence stx
I updated my kernel in slackware current but can't install lilo, when i was with my old kernel it gave an error about not finding the sda drives (they were named hda before the upgrade).I booted into the slackware 13.0 dvd and modified fstab and lilo.conf replacing hda with sda but lilo still gives an error of not finding sda drives.How can i install lilo so i can boot into my sistem??
View 14 Replies View RelatedI've upgraded Slackware-13.1 I had installed to Slackware-Current using a local tree I had download with mirror-slackware-current.sh script, but when I rebooted I could not get the graphics to load. I think it's because I've also modified /etc/groups and add an username after audio: and video: group, but I forgot that and had to remove slackware from the machine.
View 4 Replies View RelatedI've tried a few different ways to install the ATI graphics driver "fglrx" to get 3D acceleration.If I try to install using the standard file "ati-driver-installer-10-4-x86.x86_64.run" from the ATI web site it appears to work but then I discover it actually got an error.I saw a reference to ATI requiring 32-bit libraries to install their 64-bit driver. Is there a link or post that explains how to add the 32-bit libraries. Will that solve the problem, or will I just waste more time trying that?
View 6 Replies View RelatedI use Alien Bob's mirror-slackware-current.sh with an excludes.txt to only download the parts of current that I want. Unfortunately it is not working for part of the exclude.txt file and I am at a loss to know why.
The excludes.txt is
Quote:
slackware64/e
slackware64/f
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txt
slackware64/kdei/kde-l10n-ar-4.5.5-noarch-3.txz
[code]...
This ignores e/ f/ y/ testing/ pasture/ source/ and usb-and-pxe-installers/ It also ignores most of kdei/ and /extra It is meant to ignore most of extra/source and just download the source for flash-player-plugin, but it is ignoring all of extra/source/, however the same syntax is working for kdei/ and extra/.
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies View RelatedI updated squeeze last night for the first time. It worked fine after 1st reboot last night. There was one reboot stalled at "hald" so I shut down and restarted. Worked ok 2nd time around
Today,upon login I got a string of taskbar notification (which I couldnt read as they all overlapped . I was able to see a kernel error message but couldnt report it (network was down) or save it (USB stick not recognised) Some programs worked, others didnt
I have the partedmagic rescue distro on USB stick so have those programs to use in order to fix the problem. Any idea how I can repair this? I tried fdisk for the hell of it. reported clean partition as predicted. I am using debian-testing-amd64-kde.
I updated fedora 10 a few days ago, by blindly installing every update available, and when i restarted, my nvidia drivers weren't loading, and I'm having an issue I had before, where the signal being sent to the monitor is out of frequency range. Basically when fedora tries to load its GUI, my monitor just goes blank. Before I could only fix it by plugging in a different (less tempermental) monitor, and messing around with the display driver.
I was wondering if there is a way to mess with the drivers from the command line. I really don't like switching out monitors, and i want to learn the skillz and such.
I was updating Ubuntu 10.10 to 11.04 and my computer crashed/shutoff because of overheating(my laptop doesn't ever do this when running Windows 7 but seems to really need to be as cool as possible when running Ubuntu). the update was at about 12-18 minutes left(also i am using wubi to have it run alongside windows). After getting pissed off that i forgot to backup Ubuntu i restarted it to see if it would finish updating.
To my dismay it the loading screen looked a bit unusual and when it go to the login screen the word "Ubuntu" was flashing uncontrollably and the time in the bottom right corner was acting the same. i feel that i have totally ruined it and i also don't know how i can remove Ubuntu from my computer so that i could reinstall it as Ubuntu 11.04 instead of upgrading from 10.10. i still have Wubi.exe for Ubuntu 10.10 but i'm not sure if that just searches for the most recent version of Ubuntu.
I was updating my netbook to the 11.04 when it crashed (I thought is was on the grid, what do you think? it wasn't!) Now if I try to do it again I get a notification and then it stops.
These are the last few lines of/var/log/dist-upgrade/main.log:
2011-05-07 11:15:47,352 DEBUG entry 'deb [URL] natty main #Third party developers repository' is already set to new dist
2011-05-07 11:15:47,353 DEBUG examining: 'deb [URL] natty partner'
2011-05-07 11:15:47,353 DEBUG entry 'deb [URL] natty partner' is already set to new dist
2011-05-07 11:15:47,354 DEBUG examining: 'deb [URL] maverick main'
2011-05-07 11:15:47,355 DEBUG entry 'deb [URL] natty main' updated to new dist
2011-05-07 11:15:47,405 DEBUG running doUpdate() (showErrors=True)
2011-05-07 11:15:48,260 DEBUG openCache()
2011-05-07 11:15:48,261 DEBUG failed to SystemUnLock() (E:Niet vergrendeld)
2011-05-07 11:15:48,620 DEBUG /openCache(), new cache size 1668
2011-05-07 11:15:48,622 DEBUG needServerMode(): run in 'desktop' mode, (because of key deps for 'ubuntu-desktop')
2011-05-07 11:15:48,623 ERROR No 'ubuntu-minimal' available/downloadable after sources.list rewrite+update
2011-05-07 11:16:13,016 DEBUG abort called
2011-05-07 11:16:13,027 DEBUG openCache()
2011-05-07 11:16:13,028 DEBUG failed to SystemUnLock() (E:Niet vergrendeld)
2011-05-07 11:16:13,440 DEBUG /openCache(), new cache size 1668
2011-05-07 11:16:13,442 DEBUG enabling apt cron job