Ubuntu :: 10.10 - Resolution / Wired Ethernet Not Being Detected

Dec 6, 2010

I just tried ubuntu for the first time and I have no idea how to get it running properly, my resolution is not being detected, my wired ethernet is not being detected yet my wireless works fine. I don't know what Xorg is and my graphics drivers are no where to be found (I am using radeon hd 6850), it wont even let me customize the background because of the missing drivers, how do I get ubuntu working properly.

View 5 Replies


ADVERTISEMENT

Fedora Installation :: Ethernet NIC Detected But Wired Network Disconnected

Mar 31, 2011

I'm stuck after a clean install of FC14 on an old Everex StepNote (Doing this for a friend). I tried Ubuntu on it first (because it's so easy) but had horrible stability issues and terminal commands wouldn't respond - however Ubuntu detected and ran the eth0 port just fine. FC14 detects my ethernet NIC, but it won't work.

Here are my details.
lspci outputs this for my NIC:
00:12:0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 7c)

Here is what I have tried so far - with no luck:
- I have toggled the networking switch on the laptop and had no luck.
- Downloaded Via's VT6102 drivers for Fedora Core, but they don't support kernel 2.6.35.*
- Run ifconfig to manually assign an IP address - which it DID take and did route add default gw as well.
- Did a ifconfig eth0 down and up as well.

After all that, I still have a "disconnected" wired connection (and yes, I did check the cable - it works just fine in my personal machine.

View 5 Replies View Related

Ubuntu Networking :: No Wired Connection Detected?

Jun 20, 2011

I'm running 11.04 on a Toshiba Satellite L350, and recently (well, for the past couple of weeks or so), I've been unable to connect to my network via a cable, only with wifi.

It isn't that it's unable to connect, it just doesn't show up in Network Manager.

My housemates, who run Windows, have no problems, so it's obviously something on my end...

Edit: I also tried connecting using wicd, but that doesn't detect it either.

View 1 Replies View Related

General :: Ubuntu Wired Network - Ethernet Does Not Work

May 11, 2010

It was working just fine, until the other day I yanked it out. The wireless works just fine on the same router. If I login to a windows 7 instance on this dual boot laptop then the ehternet works just fine. So it's not a hardware, cable or router issue. The card even gets an ip, but I can't connect to the internet.

View 2 Replies View Related

Ubuntu Networking :: Cant Get SiS900 Wired Ethernet To Work?

Jun 13, 2010

laptop: averatec 6200 series
ethernet driver: SiS 900
wirless lan driver: rt2500

I got 10.04 installed and running pretty well.I cant get the wired ethernet to work but the wireless works. i did the the command line

[Code]...

also, dont know if i matters but ive got 8mbps/1.5mbps cable (motorala surfboard cable modem) and a linksys wrt54g wireless router.

View 4 Replies View Related

Ubuntu Networking :: Can't Get Wired Ethernet Connection To Work

Jul 24, 2010

I have a HP Mini running Ubuntu Desktop 10.04, and I cannot get a wired connection to work. My network card is "Broadcom Corporation BCM4312 802.11b/g (rev 01)", and I have the restricted drivers for the card installed. Wireless works fine, though.

My /etc/network/interfaces:

View 4 Replies View Related

Networking :: How To Get It To Connect To Wired Ethernet Network

Mar 4, 2011

Just installed Scientific Linux 6. Does anyone know how to get it to connect to wired ethernet network?

View 3 Replies View Related

Networking :: Wired Ethernet Not Working - Cannot Connect

Dec 2, 2010

I run Ubuntu 10.04 on a PackardBell laptop, with an Orange Livebox 2 providing ADSL. I am connected to the Livebox via WiFi, but I can't connect using the ethernet cable. I think that in making changes to the system some time ago I must have ruined something, but I can't work out what.

View 8 Replies View Related

Ubuntu Networking :: No Auto Connection To Wired Ethernet On Restart?

Nov 30, 2010

Just noticed that auto connection to my wired ethernet is not being established after restarts I'm making. Never recall this in the past. I do get an auto connect when I shutdown and restart. I'm using 10.04 LTS Lucid Lynx.

Also have noticed that nearly every upgrade over the past week or so is calling for restart to complete the upgrade. Can there be any unwanted problems in doing several upgrades over a period of several days before doing the restart? I'd like to think not.

As you can imagine these two issues together are causing some lost time.

View 5 Replies View Related

Ubuntu Networking :: Share Wired Ethernet Internet Connection?

Jul 24, 2011

I have two laptops (Dell & Lenovo), both have wifi.

I am having one wired Ethernet connection.

I want to share this Internet connection among two system , to access Internet from both the system.

I had tried by creating a wireless network, but was not able to do so.

View 3 Replies View Related

Ubuntu Networking :: Doesn't The Wired Ethernet Connection Work

Jul 25, 2011

I have installed Ubuntu 11.04 using Wubi through Windows 7. It seems to be working but it will not connect to my wired internet connection. It tells me there is no wired connection, when there is. I used sysinfo and its not showing any network adapter or controller. I have a board with nvidia nforce go 430, could it be a driver issue. It works fine in windows though. Tried using a wireless adapter and all is working. But why doesn't the wired ethernet connection work.

View 9 Replies View Related

Ubuntu :: Share The Wireless Network With Old Lap Top Via The Wired Ethernet Cards

Mar 25, 2011

I want to share the wireless connection from an Ubuntu machine with an old lap top via the wired Ethernet cards. the old laptop doesn't have wire less. the Ubuntu machine is 10.04 LTS -the Lucid Lynx.

View 1 Replies View Related

Networking :: Puppy Doesn't Detect Wired Ethernet?

Jul 2, 2011

I've got Puppy Linux on a USB key, and yesterday, while I was on the internet with it, it hanged. I didn't know what to do, and I rebooted from the button (I now know what to do ). The problem is that, after rebooting, Puppy doesn't recognise the router. I've tried to apply the drivers that are on Puppy, but there aren't any compatible.

My router is a Xavi 7968 and my Network Card is:

NIC Fast Ethernet PCI Familia RTL 8139 from Realtek

(On Realtek's website, there isn't any driver linux-compatible)

View 7 Replies View Related

Ubuntu Networking :: Ionitx Can't Get Wired Ethernet To Work ( No DHCP Lease )?

Jun 5, 2010

I have a Zotac Ionitx A-U. I can't get it to establish an internet connection with the wired ethernet within Ubuntu. The chip is detected, but trying to bring up the connection stalls out at trying to obtain a DHCP lease, like this:

DHCP DISCOVER ...
DHCP DISCOVER ...
No DHCPOFFERS received
Specs:
Ionitx A-U
Ubuntu 10.04 x64 kernel 2.6.32-22 (also didn't work in 9.10)

[Code]...

View 3 Replies View Related

Ubuntu Networking :: Wired Ethernet Not Working On Compaq Presario 6310

Jun 13, 2010

I acquired an older hp compaq presario computer version 6310us, and initially installed mint, followed by Ubuntu 9.04. Neither one recognized the onboard ethernet port. I checked the bios, and LAN is enabled. It is also enabled in the drop down menu from the toolbar on the desktop. The cable works fine on other computers, and the light on the ethernet port flashes like it does when the cable is connected. I'm new to linux, so not sure what to do to get the connection working.

View 2 Replies View Related

Ubuntu Networking :: Ethernet Card Not Getting Detected

Dec 3, 2010

I have brought a new DELL INSPIRON 1410. I installed ubuntu 10.04 but my ethernet card is not getting detected where as in windows 7 is working..

View 2 Replies View Related

Ubuntu Installation :: Wired Minimal Install - No Network Interfaces Detected?

Jul 18, 2010

I'm trying to do a minimal install via a USB flash drive. Everything was good until it tried to recognize my network (wired). It showed "No Network Interfaces Detected" (On Ubuntu and Debian). I wish to do a minimal install since I want to install the programs I want myself. Plus, I have a small flash drive.

I'm using an Atheros AR8151 PCI-E as my card (as shown by Windows). I also have a wireless, though I don't care much about that, wired will probably be easier. Through the command shell, I can see Ethernet Controller: Atheros Communications AR8151 v1.0 Gigabit Ethernet (rev c0). When I do plug the Ethernet cable in, I don't get the lights on during Linux installation but they do come on in Windows. If I need some additional driver, can I somehow add it to the minimal installation? I was looking through the log file and found that i82365 could not be loaded, a PCMCIA controller. I'm assuming this is separate from the NIC and interfaces between the bus and the NIC.

no idea whether it's because it couldn't find the drivers or because the controller was incorrectly identified. But I'm pretty sure this is why I can't get my network card to work.

View 3 Replies View Related

Ubuntu Networking :: Ethernet Lan Port On The Computer Seems To Not Be Activiating As No Wired Connection Is Recognized

Oct 6, 2010

while my brother was browsing the web on my windows partition he had a blue screen pop up, one of the soft/hardware error ones, not a true BSOD, anyways, ever since my lan port on the computer seems to not be activiating as no wired connection is recognized. The lan port/card is directly attached to the Mother Board, it's a gigabyte motherboard in a self-build computer. I'm just wondering if there's anything I can do to troubleshoot this and see if it is truly a hardware problem or if its something else.

View 9 Replies View Related

Ubuntu Networking :: Wired Ethernet Connection - Unable To Connect To The Internet Or My Router

Dec 5, 2010

I have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.

View 9 Replies View Related

Debian Hardware :: Wired Ethernet Dongle Drops Connection

May 2, 2015

I'm using a wired ethernet dongle due to my machine not having an ethernet port, however it sometimes drop connection, how can I diagnose whether if the dongle is faulty or my system is having trouble maintaining a connection.

View 14 Replies View Related

Networking :: Wired Ethernet Conection Deminished On Debian Squeeze?

Jan 22, 2011

I have a generic P4 desktop computer with Debian Squeeze. Since instalation my wired ethernet connection will slowely slow down and then quit when surfing the web. Sometimes it seems worse than othertimes. If it fails I usualy can get it to come back back up by going to Network Connections and clicking on "wired connection"and them just closing the window. It will work for a bit but the conection will inevitably quit in a short time again. Interstingly it seems mostly a problem with web browsers as doing upgrades, package instalations, using SMXI and things of this sort do not seem to be a problem. I have tried both Epiphany and the Squeeze default Iceweasel with identical results. Also when using Google Earth a similar situation occurs in about 2 minuits of use. The same computer running Debian Lenny with Epiphany and WXP with the dreaded IE do not have this problem.

View 5 Replies View Related

Ubuntu Installation :: Ethernet Adapters Detected But Disabled?

Mar 6, 2011

I'm trying to install a second NIC on a computer running 10.10 x64 server edition, but am having a bit of trouble and hoping someone can help. I got a used gigabit PCIe ethernet adapter and hooked it up, but it didn't display when I ran ifconfig, so I assumed that it was broken. However, when I plugged in a known working 10/100 adapter from another machine it also wasn't configured.

I then did a bit of investigating and found that both cards ARE detected, but are unable to work for an unknown reason. Here's the output of "sudo lspci | grep -r Ethernet"

00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a3) 01:07.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11) 02:00.0 Ethernet controller: D-Link System Inc DGE-560T PCI Express Gigabit Ethernet Adapter (rev 11) The bridge is the working onboard NIC, and the others are the ones that I'm trying to get to work. This also might help diagnose the problem:

sudo lshw -C network
Code:
*-network DISABLED
description: Ethernet interface
product: NC100 Network Everywhere Fast Ethernet 10/100
vendor: ADMtek

[Code]...

View 6 Replies View Related

Ubuntu Networking :: Usb To Ethernet Device Not Detected / Enable This?

Jul 28, 2011

I'm using ubuntu 10.04 enterprise cloud server for my project. I use USB NIC to interface with other 2 servers. but the system doesnot detect USB NIC. detect & configure USB NIC in the network.

View 5 Replies View Related

General :: Ethernet Card Not Getting Detected?

Feb 22, 2011

I have installed fedora core 8 on my system. But i am unable to use LAN connection. here are the results of some of the commands which give error messages

[root@localhost ~]# lspci | grep -i ether
00:19.0 Ethernet controller: Intel Corporation Unknown device 10f5 (rev 03)
[root@localhost ~]# uname -a

[code]....

View 11 Replies View Related

Ubuntu Networking :: Upgrade To 10.04 Broke R8169-based Wired Ethernet - Working Only At 10Mbps

May 1, 2010

After upgrading from karmic to lucid yesterday made my RTL 8111 -network card die. It's integrated on Intel D510mo mini-itx board.

dmesg:

Code:

After some googling I found out a lot of forumposts about the same problem from year 2007, but the troubles seem to disappear on the newer versions and seem to be back now? With those posts I managed to get the link up by using ethtool by setting autoneg off and setting speed to be 10mbps and half duplex. Any other speed/duplex combination fails.

One suggestion I found was to install r8168-driver from Realtek instead of the r8169. It didn't help, result was very much the same.

I booted to 9.10 live-cd and there the network worked as intended (100Mbps, I dont have a gigabit switch)

I really wouldn't like to fall back to 9.10, but my file server is not very usable with 10mbps.

View 9 Replies View Related

Debian Hardware :: Wired Ethernet Interface Not Listed On Toshiba Laptop

Jun 18, 2014

I need to share internet connection through wired-ethernet with another computer which does not have a wifi card.

However, no eth* interface shows up on ifconfig. Even more surprinsingly, neither lshw nor lspci shows anything related to wired ethernet controller/adapter:

Code: Select alllshw -C network
  *-network
       description: Wireless interface
       product: WiFi Link 5100
       vendor: Intel Corporation
       physical id: 0
       bus info: pci@0000:03:00.0
       logical name: wlan2

[Code[ ....

Why isn't my laptop's wired ethernet not showing? I have a Toshiba Satellite PSAG8U-04001W.

The installation of Debian wasn't originally on this system: it was on an older laptop whose motherboard fried, so I rescued the hard drive as well as the Debian installation. However, I doubt this should have anything to do with lspci not even detecting the wired eth controller.

View 2 Replies View Related

Debian Hardware :: Realtek RTL8101E Wired Ethernet Random Disconnection

Aug 23, 2014

I have this wired problem with my realtek rtl8101e ethernet. It keeps on disconnecting randomly with my router. My computer is connected to D-link router via LAN cable. This problem does not occur in my windows xp os.

I have to suspend and resume my Debian os (wheezy 7.6 KDE) to get the ethernet connection up everytime it disconnects with my router.

These are my ethernet details

Code:

Select allEthernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 05)
        Subsystem: Realtek Semiconductor Co., Ltd. Device 0123
        Flags: bus master, fast devsel, latency 0, IRQ 42
        I/O ports at e800 [size=256]
        Memory at fdfff000 (64-bit, prefetchable) [size=4K]
        Memory at fdff8000 (64-bit, prefetchable) [size=16K]

[Code] ....

View 4 Replies View Related

Networking :: Mint Current Distro - Shut Off DHCP For A Wired Ethernet INC?

Apr 16, 2011

I recently did some troubleshooting on a USB wireless dongle hooked up to my Mint distro. I need the USB wireless to access a home DSL wireless modem out to the Internet. The wireless DSL is on 192.168.0.1

I also have a 10/100 ethernet NIC in the computer, for non-wireless connections. The wired ethernet is all 192.168.1.1. I noticed in /var/log/syslog that there are numerous "DHCPDISCOVER on eth0 to 255.255.255.255 port 67" messages.

Since eth0 has a hard-coded IP, I dunno why DHCP is trying deal with it. Can I turn off DHCP activity against eth0? How to do that?

View 2 Replies View Related

Ubuntu Networking :: Atheros AR8132 Ethernet No Longer Detected?

Mar 1, 2010

I have an absolutely bizarre hardware issue (concerning the Atheros AR8132 PCI-E Fast Ethernet Controller) that has been giving me quite a bit of grief for a while, and having completely hit a wall on this one, I'm a reasonably-experienced Linux user of several years, and have been running Ubuntu 9.10 on an Acer AOD250 netbook for several months out. I know that this model has wireless issues out-of-the-box (easily fixed), but it did not have any noticeable ethernet issues. That is, until I attempted an installation of Arch Linux.

During the Arch Linux installation, the ethernet card was initially detected, but unable to be used (because of a bad module in the kernel released with the installer). As I didn't know the fix for this at the time, I decided to reinstall Ubuntu 9.10. This time, however, the system failed to recognize the wired ethernet whatsoever. Instead, the external activity lights for the port (green and orange) are ALWAYS on, yet the device doesn't function.

I have done a successful install of the latest drivers directly from Atheros for the device and have them automatically loading with the kernel during boot, but as the device isn't recognized, the drivers aren't doing any good. Relevant information:

Code:
root@niobium:~# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)

[Code]...

View 3 Replies View Related

Ubuntu Networking :: No Network Interfaces (neither Ethernet, Nor Wireless) Detected?

Mar 2, 2010

Problem:I got a new Acer Aspire 8935G notebook, installed Ubuntu 9.10 on it and everything is fine, except the fact, that it wont detect any network interfaces (or how to call it So there are no ethernet or wlan connections available in the network-manager..

lspci gives me following lines:
joe@IGNAZ ~ $ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev

[code]...

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved