So I'm not the total Linux geek but recently I have adopted Ubuntu 10.04 and overall i have been ejoying the experience... but I use Iburst Terminal to connect online... this is where the problem comes in, i have failed to install it multiple times following the following guide... [URL]
how to use it, without Internet the experience is flawed..
i have download all the drivers for iburst usb modem but it is not installing.
View 1 Replies View RelatedI'm a Linux noob an I am really desperate for some top, top, top assistance. Been battling a while now with my iBurst USB modem driver and hope there is someone out there that can help? I have been through umpteen forums and threads and tried literally everything I read, but to no avail. I also realize there aren't many Ubuntu users that use the iBurst modem, but I am appealing to the few out there that do.
I have installed the open source ibriver-2.6.31 for my iBurst USB modem. Initially all went well with fast connection etc., connection everytime I boot, until... I started updates of 10.04 LTS, that is when I became aware, from the forums, that a re-install of the driver is required after every package update due to no "package management" in the iBdriver. what a pain in the proverbial to say the least!
Anyways.. now I am the stage where the driver is always installed, but...all of a sudden, I need to run pppoeconf and set up the driver after each boot to get connected!!!! If I can't find a solution it will force me back to Windoze7 which I dread to do! Can a script be written to pppoeconf (rp-pppoeconf.iso is loaded I think) automatically during boot perhaps?
So any top Linux hacker or "notsonoobasIam" user out there with a iBurst modem and similar pains & mis-fortunate experience please share your ideas and thoughts to correct this problem permanently for me please? (I should maybe mention that the other day I performed the "Grub2 Profile" exercise to try and speed up the boot time, this does not perhaps have something to do with the fact that I need to reconfigure in pppoeconf after every boot does it? I doubt it)
I am using a broadcom modem. After failing to connect it, I decided to use an NDISWRAPPER, but it needs a drive I cannot find: I believe it is bcm4312.inf. Finding drivers is not that difficult to find; but finding this particular one in .inf format has been difficult. Is there any forum (this?) where I could request such a drive?
View 1 Replies View Related1) I have micromax 372g usb modem(3g).. but it is not being connected ubuntu 10.10
2) I suppose my device is being recognized and I tried this method [URL] but when I tried to install, it said that package missing for wvdial.
What should I do. Where can I get this package and how can I install it (with no dependany check). My life is extremely difficult without internet on ubuntu, I am ready to give any other information that u need. I have ubuntu 10.10 maverick dual boot with windows. And yes take into consideration that I don't have internet on ubuntu. So provide me full detail how to install it from other media and commands to execute them.
I am running Ubuntu Desktop and need to install a Wavecom WMOD2 USB.tell me in laymans terms how to install it?I ask because I cannot find the drivers ANYWHERE?! My client asked me to have this done by tomorrow, and I did not think I would have this much trouble finding drivers.....
View 3 Replies View RelatedI had some Problems with analog Modems.We have now new Server Hardware witch don't work with Suse 10.2, now we Upgrade to 11.2, but the Devolo Modem doesnt work with the Drivers vor 10.2, No Problem, this Modems are sold out, i had to search for other Modems.Now I Test an Softmodem with Motorola Chipset, Bad Luck.Then i Think, Try a Hardware Modem From US-Robotics, Expensive but working on Linux: USR802981-OEM But don't working on Suse 11.2.If you had some Other Modem (internal Pci) witch works for DialIn Data Connections please sent me Type and Configs
View 9 Replies View RelatedI switched from windows to Ubuntu 10.10. But I'm not getting along with it as well as I expected I would Specially cause I'm not getting the best out of it due to limited web connectivity. I used to use a usb WiMax modem back in windows (which is also supposed to be supported by linux as my service provider said) for internet. But I'm having a hard time configuring it on my Ubuntu. The modem works fine but I'm failing to install the drivers [url]. I used my cell as a temporary modem to get help from the web.
I downloaded:-
i2400m firmware 1.5.0
WiMAX Tools 1.4.5
WiMAX Network Service 1.5.2
According to the documentation, I'm supposed to install the linux kernel 2.6.35 which Maverick comes with anyway.
Then comes the part to install the firmware. The command I used was
Code:
But unfortunately and annoyingly the result is
Code:
I didn't get it. Am I missing any package or something?
The USB stick modem stated in the title came with a software for Windows and Mac operating systems. The manufacturer is ZTE corporation, China. Is there anyway I can get the drivers and software for Fedora Linux.
View 5 Replies View Relatedwith installing Modem Huawei E170. my modem can not connected and suddenly remove from my PC. i am using Ubuntu LTS 10.04.
View 1 Replies View Relatedfind and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
Steps for using scan Modem to Identfy dial up modem?
View 1 Replies View RelatedI have this USB modem P300U(SIM600 chip based) which works fine under wind@ws because it has it's own driver, but the clever seller told me that it worked under Linux as well. It was with Redhat 8 but I couldn't get redhat 8 to download. And until now absolutely false.
I have Debian with Kernel 2.6.32-5-686 I just want to send sms through this modem. It's not recognized as modem I'm frustrated because it's not useful for me if it doesn't work on Linux I looked for info but I can't make it work. What I get in my debian is:
lsusb: Bus 002 Device 003: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
dmesg: 9857.011649] usb 2-1: new full speed USB device using uhci_hcd and address 3
[ 9857.818942] usb 2-1: New USB device found, idVendor=10c4, idProduct=ea60
[ 9857.818989] usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[code]....
I have a Centos 5.4 server running kernel 2.6.18-164.11.1.el5PAE. It has an internal modem, and I need to be able to issue AT commands from a script to the modem. I need to simply dial a number and hang up. The relevant piece of my script is:
[Code]...
With an external modem, this works no problem. With an INTERNAL modem, the call never goes out. I fired up minicom to make sure the modem was working correctly, and if I issue those AT commands from within minicom, everything works great.
While minicom was running, I noticed a peculiar fact: WHILE minicom is running, the script works from the command line, and I can see all the AT commands and OK's in minicom, (minicom acts as a monitor). When I exit minicom, the script stops working. It appears minicom is creating a bridge between the com port and the modem itself. So, what is minicom doing that I'm unaware of?
The server's sole function is to run asterisk as a voicemail server (avaya wanted well into 6 figure territory to implement this....). This script is to dial an avaya FAC to turn the voicemail message lights on and off on the end users' phones.
I have been using ubuntu for quite a long time, and for the first time, I am now unable to set nvidia drivers to work. I have just install ubuntu 9.10 amd64 on an AMD 64 athlong X2 with a GEForce 6500 nvidia card.
The only reason I need the proprietary drivers is to use two monitors.
I am going crazy, I have tested everything I have found on the web. I have tried all the nvidia drivers version, I have tried envyng, ... but nvidia do not work!!
I am trying Xinerama with nv, but it does not work either!!!
Here is my xorg.conf file in which I have tried to use nv driver to set dual monitor. X fails to load and it says that screen 0 is deleted, that devices are found but there are no matches in the config file. Any clue?
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/X11/misc"
FontPath "/usr/share/fonts/X11/cyrillic"
FontPath "/usr/share/fonts/X11/100dpi/:unscaled"
FontPath "/usr/share/fonts/X11/75dpi/:unscaled"
[Code]....
I know i know, some will say "eww Proprietary Drivers" but hey, ubunt is all about having more control of the OS. Is there an easy way to install Proprietary Drivers thats not through the hardware drivers option on system?
View 2 Replies View RelatedI installed Xubuntu the other night (completely wiped machine) and started doing all the updates on it. After a couple of reboots, I changed from the proprietary drivers, to the regular nVidia drivers. After doing this, the startup logo is displayed at a really low resolution. Is there a simple fix to change this and use the nVidia drivers as well?
View 1 Replies View RelatedI've installed Ubuntu Netbook 10.04 on my HP DV2000 laptop and now I want to get my wireless to work by installing the proprietary broadcom drivers (4311, I think). But my internet doesn't work yet obviously, so I need to download the drivers to my thumb drive on my desktop and install them on my non-networked laptop.My issue is that I don't know:a) Where to get the driversb) How to install them from a local drive
View 2 Replies View RelatedI just installed Karmic beta and I'm having issues with getting my wireless driver to work. When I was using 9.04 and when I booted 9.10 from a CD, I could just go to System > Administration > Hardware Drivers and activate a wireless driver and everything would be just peachy. The problem is that, in the install of 9.10 beta, no drivers appear when I load the Hardware Drivers GUI, so I can't get wireless internet.
Is there anything I can do besides wait a few days for the full release of 9.10 and hope that solves the issue?
[URL] I just updated and then saw this news , whats the solution for me, I either want to go beta or downgrade, If i try to boot to previous kernel, boot hangs in graphic mode, I cant start X and gdm . How to install kmod with beta drivers? Or whats the solution, nvidia ver: 195.36.08
[Code]....
I've been trying to get online for the better part of a week now with no luck. I can't get my network up to download drivers for my hardware - without the drivers I have no GUI so I'm stuck trying to do this in text mode.
View 14 Replies View Relatedafter few years being limited with my pc configuration (windows OS) I realized that linux or it's distributions is the best invention in 21 century. And finally I am starting use it. openSUSE 11.4 installaition succesful, I updated it and it looks I don;t have any problems, but I got few questions.
1. How install older version of mozilla firefox internet browser here? I can't install some plugins because it's a firefox beta 12 version, for example. I am quake fan, o I like play quake live, but i can't install quake plugin, because my firefox is beta version.
2. Does I got all drivers instantly installed to my mashine? ATI video drivers, sound drivers ect??
3. Are there any How-To guides which can teach me, how I can improve my desktop? gadgets, 3D desktop ect...?
I verify in Intel site that my Intel'drivers are outdated, because Dell Suport is slow, so how do I update them in Opensuse?
Do I use Virtual Machine or try through Wine?
I have recently obtained a dell 725 printer but it the drivers do not seem to be available when I try to configure it.
View 3 Replies View RelatedI have a new dell inspiron 1545 since i am facing problems with vista i wanted to work with linux operating system (fedora 9). I want to install the video drivers and sound drivers for my laptop..When i installed fedora 9 my screen resolution was 1366x768 but suddenly now my resolution is 1024x768. I tried to change the resolution but I am unable to find my laptop resolution. What could be the problem
Here I can see my video card and sound card.. I want to install the drivers for my cards
when I boot into Fedora right before the login screen I get a black screen with a command line.How can I uninstall the drivers and get it work again without ATI Drivers? I have switchable graphics and for Fedora have to switch them in the BIOS but with integrated as well as discrete graphics I get the same black screen.I have the LiveDVD ready and only need advice on howto log in in text mode or recover via LiveDVD.
View 1 Replies View RelatedI'm planning to install Ubuntu on a new PC and use an external dial-up modem for internet connection. The modem I plan to use is the US Robotics USR5637 56K USB Faxmodem, which USR claims is compatible w/Linux kernel 2.4.20:
[code]...
In the modem's Installation Guide, it says: "You need a USB modem driver (CDC ACM) compiled into a Linux kernel 2.4.20 or higher or as a loadable module for your kernel. Installation of the modem under these kernels is fully automatic provided your kernel has the Plug and Play module enabled (default)." So...uh...does Ubuntu meet these specs? Are some version #s of Ubuntu, or its variants, different with regard to these specs? I have the CD of Ubuntu 9.10 Desktop Edition--is this one OK? Should I try a later or earlier version? I'm really looking for a version that will be the least hassle to set up and use; I'll probably have to use Wine, so I can use MS Word 2000. Is there a Ubuntu version best for this too?
What is the best Fax/Modem software out there for 10.10
View 2 Replies View RelatedI have a huawei E220 3g modem, bt It's locked. How can I unlock this with ubuntu 10.04
View 9 Replies View Related