Ubuntu :: 10.04 Instability - Screen Stays Up Momentarily
Feb 18, 2011
Just upgraded to 10.04 on Wed and noticed an instability. It's intermittent, so can not tell you what triggers it, but when it kicks off a commandline screen comes up, with a command pointing to some battery monitor software, and I have a desktop, so no battery and wonder why my machine has a battery monitoring software, when none should be installed. Anyway the screen stays up momentarily, then the system tries to go into something like a screen saver and I get all garbage on the screen, loose all ability to control and have to perform a hard reboot to recover from this.
View 9 Replies
ADVERTISEMENT
Jun 15, 2011
if I reboot the computer, I get the grub menu and am able to choose between Win7 and Fc15. A couple of times during installation the screen flashed black and diplayed a message for a brief second. I can't read that fast but it says something like "DRM nouveau- unknown or unsupported chipset" and one more line that I can't catch. When this happens, I see the pre-login loading screen, the one that shows an icon of a hard drive, network, and so on as each resource is secured. I can log back in, but this starts a new session- it doesn't remember what I was doing. I had to redo the install and setup several times because of this.
I can log in and so on normally, but the black screen and message will appear at random, forcing me to start all over, which is really frustrating. what's going on? Is it the video card? How do I install a driver for it? Also, the hard drive in question has been through a lot. could it have a bad sector or something? Windows didn't even want to "see" it, that's why Fedora is installed on there.
View 11 Replies
View Related
Aug 7, 2010
I have windows installed through virtual Box now but i have some questions. When i make it full screen it goes full screen but Windows stays in the middle of the screen small and doesn't adjust to the full screen. Can you make windows completely take up the full screen Can i access folders on my ubuntu drive ? i have a file in downloads i want in windows but don't want to reinstall it
View 4 Replies
View Related
Nov 3, 2010
I downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
View 1 Replies
View Related
Jul 4, 2011
When I run a program in fullscreen (a ..... video, for example), the taskbar stays on screen. To be abundantly clear, I mean the bar along the top with the power button and user name on it. It stays on the screen, but I can't interact with it; the mouse clicks "under" it as if it weren't there. I'm sure Compiz has something to do with it as it's as new problem, but I don't know how to fix it. I tried disabling Window Decoration, I tried setting it so it only applied to windows with !(state=fullscreen), but nothing seems to work.As a related problem, the menu button in Firefox (the one to the left of the tabs) just appeared out of nowhere. How do I make that go away? And the menu bar as a part of the taskbar doesn't work any more. Where's the option for that?
View 3 Replies
View Related
Aug 16, 2010
I just installed Mythbuntu 10.04 and have my Sony LCD TV connected via a DVI to HDMI cable. The issue I am encountering is that everything works fine until I turn off the TV and turn it back on later, because the screen stays blank and from what the TV tells me there is no signal. I have no idea what can cause this. I checked the TV settings in terms of power saving and turned it all off. I turned off the screen saver in Ubuntu, but still the same issue. My motherboard uses the ATI HD4200 onboard graphics engine
View 1 Replies
View Related
Nov 4, 2010
I have tried booting from 2 different Ubuntu CD's (10-04-01 and 10-10) and a Fedora CD.All 3 CD's do the same thing, in Ubuntu I just see the first screen (Keyboard/Battery on the bottom with the guy next to it) and then the screen goes black but the lights, that indicate there's a computer connected and transmitting info onto the screen, are still on.
I know the CD's aren't the problem because they work on 2 other computers I have.The CD drive isn't the problem because took it out of a working computer and that booted up fine with the CD's.I've restored BIOS to default settings.I've tried booting with 1 stick of ram at a time but still doesn't boot.I've left the computer on for 3 hours but nothing appeared on the screen and the lights never turned off. It was just a black screen, nothing on it, not even a blinking cursor.I know it's capable of booting up CD's because the Windows XP setup disc boots.
View 2 Replies
View Related
Dec 31, 2010
I've installed Ubuntu on another PC and most things are great except fore the black screen that you get when you start the PC (just before the Ubuntu Logo). It stays black for 20 seconds. Is there something I can do to make it shorter like on my other PC.
View 9 Replies
View Related
Jun 16, 2010
Had Ubuntu installed, it worked fine but I had to format for a new partition (out of space) I program in Windows, I would consider myself a Windows geek, and would like to try out Linux. After I boot into setup, it stays at a black screen. It did that when I was installed Ubuntu, the first time. I don't know how exactly it ended up working, after a lot of different things I was able to get it to boot.
View 3 Replies
View Related
Jul 10, 2010
Alright I installed Ubuntu fine, everything was working great. And I was able to shut down and startup the system once or twice. But now all of a sudden, when I power up, the screen stays at the DOS terminal with the blinking underscore at the top line. It never changes, won't load, etc. What in the world happened?
View 1 Replies
View Related
Jun 5, 2011
This happens on boot on Fedora 15. Plymouth Boot Screen just stays there and I can't login. Searching around suggested kmod-nvidia to cause this (one moth ago ofc), but here I am with Intel Graphics and the default drivers.
View 6 Replies
View Related
Dec 14, 2010
I like to suspend my laptop when I close the lid. I have squeeze installed. When I open the laptop lid all lights indicated that it coming out of suspend but the monitor stays black. It is worse since I install the ati drivers for the card instead of the xorg. It did it with both but worse with nonfree drivers. I can get it to come out by ctrl alt f2 and the ctrl alt f7. However yesterday that did not work but that was the first time. My laptop is an acer 5251-1513 amd processor v120, and hd 4250 radeon
View 6 Replies
View Related
Dec 12, 2015
I'm using Debian Sid xfce on my lenovo laptop. When i try to shutdown, the screen always stays on (the fans turn off). It says "reached target shutdown", then this happens: [URL] .... and then it hangs. I have to press the power button to shut it down. (I have the same problem with reboot). I had the same issues with Jessie.
Things i tried so far and didn't work:
Code: Select allshutdown -h now
shutdown -p now
halt
poweroff
systemctl poweroff
init 0
I edited /etc/default/grub and added the following options at "GRUB_CMDLINE_LINUX_DEFAULT":
acpi=force, acpi=off*, acpi=noirq
*acpi=off: shutdown (not reboot) worked a few times but i didn't have wifi and power manager didn't seem to work
none of them worked..
I have no energy or wake up options at my BIOS.
I found out that i can normally reboot with the Alt + sysrq + REISUB key combination.
View 5 Replies
View Related
Apr 7, 2016
After applying upgrades to debian 8.2 on a lenovo yoga3 notebook and a reboot I am not able to login into my GNOME desktop. The login screen stays black. If I press the power button to suspend I can see the login screen with default background for ~1 second before it turns black again. What can I do to fix this issue? Is there a way to login via terminal and do a rollback? Can I use my home folder an personal settings if i reinstall debian and keep the /home partition?
View 14 Replies
View Related
Jun 22, 2011
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread
Code:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
[code]...
View 1 Replies
View Related
Jul 11, 2011
Ubuntu Server 11.04 64bit seems to work fine on my Dell - most of the time at least. Sometimes upon boot, the screen stays black after grub. If it does boot correctly, I can find the following in dmesg:
[Code]...
View 1 Replies
View Related
Jun 22, 2011
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume
[code]...
View 8 Replies
View Related
Mar 15, 2010
I guess I messed around with my computer a little too much when I was bored. I tried installing compiz and emerald and my computer locked up. Rebooted and then it stays on a black screen. Rebooted and tried safe mode now. Removed emerald by command prompt to see if that would work and rebooted.
View 3 Replies
View Related
Dec 30, 2010
I have a server running Ubuntu 10.04. I use it for mysql as well as samba file sharing across 10 computers. It had been working out great. I only ever needed to restart after I would install updates and to sort of thing. Starting this week however, it has started kicking all the computers off of both mysql and the samba shares every few minutes. It is very strange. The mysql connection can be restored just by closing the database and reopening it. The file shares are only a problem if you try to access them though a program other than your file browser (e.g. save a file you are working on in word to the server). The server never shuts down and all services can be reconnected immediately. It is very strange. I do believe that the server installed some automatic updates at the beginning of this week when this all started happening. I am not sure if one of the updates is causing the server to do this or not.
View 1 Replies
View Related
Nov 23, 2010
I had a problem where my system momentarily hanged for a few seconds. Sometimes when opened a window like Dolphin or when I made a window full screen, sometimes when clicking on the screen while watching a DVD or sometimes when I clicked on a button it just froze for a few seconds and responded.
I have fixed the problem by disabling "Processor Power Managament" in the Bios.
this happenend on my desktop computer. See specs in my signature
View 2 Replies
View Related
Sep 29, 2010
KDE tends to freeze momentarily after performing some tasks, like closing a window, pressing a button that should result in an option pane being popped, or simply trying to drag a window around the desktop. It doesn't happen every single time, but it's very persistently. I first noticed that the mouse would freeze sometimes when I do something like close a window and it takes 3~4 seconds for me to get control back, and for the task that I requested (close a window for instance) to be carried out.
During this time, I notice that all of KDE freezes up because my binary clock widget freezes as well. Is this a known problem with KDE? Can somebody give me some advice as to what might be causing this behaviour? I recall having similar problems back when I first tried 11.0, but back then it was so bad that I ended up going with Gnome. Now KDE has me hooked again, except for this one niggling issue. If I can get this resolved, then I think I will finally have an absolutely stable linux desktop.
[Code]....
View 9 Replies
View Related
Jan 25, 2011
Have a seagate laptop hard drive, it spins up momentarily, makes some quiet electronic 'zipping' sounds then stops. After this, it is still reachable by the seagate utility, which says the hard drive is experiencing too many read errors, but the platters are definately not spinning.
View 4 Replies
View Related
Jul 31, 2010
No shared files/folders/drives and printers vanish. Most of the time re-booting will be the answer, but not this time I have 3 Ubuntu machines networked with two XP machines. one hard wired and two wireless on the 10.04. ONE wireless is networked right now and can see the other Ubuntu machines and the Windows machines and the printer. The other two are blind as a bat The two XP boxes one hard wired one wireless .. see each other. But see nothing on the Ubuntu machines that are down. Would like to fix this issue PERMANENTLY and quit screwing with it every couple of weeks Tried re-installing everything green in Samba and that did nothing. follow up edit managed to get the printers system back up on all on the net just by re-booting.
View 3 Replies
View Related
Dec 12, 2010
I'm having stability problems with opensuse 11.3. On three occasions when you login the system is rebooted. Also blocked the entire system three times. This happens shortly after starting and running amule, but not if due to this application. Use kde 4.5, these problems are happening in the last week.
View 7 Replies
View Related
Jun 21, 2011
I used Easy Tag to edit my songs' ID3 tags. Banshee reads them fine but Rhythmbox misreads them! For eg., blink 182, Blink 182, and Blink-182!!! Apparently it's because Easy Tag makes ID3v1 tags while Rhythmbox read ID3v4? That's SO stupid! What am I supposed to do now? I saw RB had a bug filed but it got closed because "it's not a problem with rhythmbox, it's a problem with ID3 tags." RB should be able to read them! That's ridiculous. So how do I fix the tags? As for Banshee, anyone else move from version 1.6 to 1.7.6? The new one crashes everytime I use it. It's simply awful. And this is supposed to lots of bugs fixed? It's the new stable version? What a joke! How do I fix this now? Or better yet, how to go back to version 1.6? ^ Never mind, I downgraded it. Still have the rhythmbox problem! I'm using Ubuntu Lucid 64 bit with Gnome. RB should be able to read them! That
View 5 Replies
View Related
Dec 26, 2009
from time to time, wireless connection gets very slow, and i have to make it reconnect, and some times, restart fedora. The wireless card has an Atheros AR5212 802.11abg NIC (rev 01). This happens mostly when i use Tucan Downloader, or Torrent, meaning, heavy internet use.
View 3 Replies
View Related
Sep 29, 2010
I have a very frustrating stability problem on my Workstation where I run a Slackware64 Current installation. The problem is, many programs just crashes, after they started, or after a quit short while. Affected are Firefox, Thunderbird, Krusader, Amarok, Konsole, and many other programs. The second problem is, if I downloaded a bzip2 archive, it is corrupt. I downloaded many archives, from other mirrors, and all corrupt. I had installed, the Multilib-packages, thought they would be the reason for the problems, and installed the standard packages of glibc and gcc. No changes. Then I upgraded the kernel from 2.6.33.4, to 2.6.35.6. (Compiled it myself) Nothing better.
[Code]...
View 8 Replies
View Related
Jan 21, 2010
I skipped over Jaunty on my main desktop because Intrepid had been working perfectly for so long. Finally took the plunge to Karmic, and have had major instability problems. I cannot trace them to any particular program I am using. At first it seemed related to power management, since it would lock up every time it had a period of extended inactivity. I have disabled ACPI in my BIOS (I think), and any power management settings I could find in gnome to try to troubleshoot. That seems to have helped, but it still happens semi-regularly, sometimes when I am in the middle of using it. I have tried checking logs and googled anything that seemed important. ie a message in kern.log reads: Clocksource tsc unstable
View 2 Replies
View Related
Sep 29, 2010
I used Easy Tag to edit my songs' ID3 tags. Banshee reads them fine but Rhythmbox misreads them! For eg., blink 182, Blink 182, and Blink-182!!! Apparently it's because Easy Tag makes ID3v1 tags while Rhythmbox read ID3v4? That's SO stupid! What am I supposed to do now? I saw RB had a bug filed but it got closed because "it's not a problem with rhythmbox, it's a problem with ID3 tags." RB should be able to read them! That's ridiculous. So how do I fix the tags?
As for Banshee, anyone else move from version 1.6 to 1.7.6? The new one crashes everytime I use it. It's simply awful. And this is supposed to lots of bugs fixed? It's the new stable version? What a joke! How do I fix this now? Or better yet, how to go back to version 1.6? I downgraded it?Still have the rhythmbox problem!I'm using Ubuntu Lucid 64 bit with Gnome.
View 1 Replies
View Related
Jul 19, 2011
I was using an extremely common debian based distro, but I have been rebooting my pc non stop for the last two days trying to get my nvidia fx5200 drivers to work. (it is just IMPOSSIBLE to disable the nouveau driver, i have tried blacklisting it, editing xorg etc, nothing works) I need to know if there are many issues with getting nvidia graphics cards to work in debian. it seems like the last 18 months worth of releases on all the other debian based distros have completely broken all support for any nvidia card made prior to 2011. i know for a fact that in windows xp all my hardware works perfectly, but i really dont want to have to use that, i have been a linux user for more than 5 years now, but all i am really looking for now is reliability. i want to be able to use the nvidia-173 driver, as i know that this allows me to watch the movies i take on my dv camera, and ......
View 7 Replies
View Related
