Ubuntu Server 11.04 64bit seems to work fine on my Dell - most of the time at least. Sometimes upon boot, the screen stays black after grub. If it does boot correctly, I can find the following in dmesg:
[Code]...
I have been trying to convert our backup web server, Dell PowerEdge 2850, from Windows 2003 to Ubuntu.The box had been hosting a couple of web sites for the past 4 years. It was light stuff, PHP/Joomla on Apache 2 and DotNetNuke on IIS. There was also Apache Tomcat on there. Recently, we also added Subversion and TeamCity for version control plus continuous integration. All of the .NET stuff has been moved over to another server that we acquired. Right now I am trying to get Sun Glassfish 3 and Alfresco WCM to run on Windows on the old server, but it is a major pain in the butt. I could use OpenSolaris, except there are a couple things that are easier in Ubuntu. The box must also be able to run FreeNX properly so that my boss, who is a GUI guy, will be able to log in to a desktop. That leaves Ubuntu, since I am somewhat familiar with it.
I was able to get FreeNX, Glassfish and Alfresco (up to a point) to run using a Turnkey Linux image. The problem is the server is proving to be difficult. I tried starting with the desktop 9.1 CD that I downloaded; however, there is massive graphics corruption on the desktop. It'll boot fine to the Gnome desktop, but the system will become really slow and the windows disappear, leaving just a border. Switching to another VT shows blurry, shaky text. I suspect there is an issue with the graphics driver, but I can't even type in any commands to find out what is going on.
I also downloaded 9.04 Server edition and it installed fine with no shaky text. How hard would it be to build on top of that for XWindows and FreeNX to work? Why is the text shaking in the first place?
I downloaded Fedora-14-i686-Live-Desktop.iso and used the Fedora liveusb-creator to put this on a 2GB USB stick. Everything seemed to have gone well and it said complete; however, when I try to boot from the USB stick, I get a black screen with a linux copyright notice at the top and it just stays at that screen forever. I tried this on two computers with the same results.
I'd previously tried with Ubuntu and had a similar issue, it would go to a purple (if I remember correctly) Ubuntu screen and it sat that forever.
I have a Dell Poweredge, 6 months old, running Fedora core 8. I have 2GB RAM and 500Gb SATA HD. I am running 3 VMWare machines. Two Win2003 Servers and 1 XP Pro. My server crashes almost daily. It doesn't actually reboot, it just freezes. It got to the point where I had to get a device that automatically reboots the server when it can't ping the server anymore. /var/log/messages has no entries that indicates the server crashed. It just stops at the point where it dies. The windows VMWare server also have no errors in the event log to indicate a problem.
View 7 Replies View RelatedI am running Ubuntu 8.04LTS x64 on a Dell Poweredge 1900 with a Perc 5i RAID Controller. There are 3 500Gb SAS drives in a RAID 5 configuration. The Kernel is Linux dtpfs 2.6.24-27-server #1 SMP Wed Jan 27 23:39:33 UTC 2010 x86_64 GNU/Linux Approximately once every 1 - 2 months I have a problem where the disk usage starts to rise for no apparent reason. When I run df the usage grows steadily over 2-3 days from 26% to 100%. At this point Samba reports that the disks are full. Baobab does not report the additional usage and the tape backup ignores the 'extra' usage and just backs up what was previously there. When I reboot the machine the usage is set back to normal and we can continue.
View 2 Replies View Relatedi have a server dell poweredge r210 i got this message. [78:384501] bnx2: eth0 NIC Copper Link is Down.
administrador@ubuntu:~$ ifconfig
eth0 Link encap:Ethernet HWaddr b8:ac:6f:86:2b:aa
inet addr:192.168.1.107 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::baac:6fff:fe86:2baa/64 Scope:Link
[code]....
I am planning to do a critical installation on a Dell Poweredge T610 server. Has anyone faced any problems installing CentOS on this server.
View 2 Replies View Relatedwe have 22 servers Dell (20 Poweredge R210 + 2 Poweredge R310) with CentOS 5.5 x86_64 (kernel 2.6.18-194.26.1.el5). Half of these are on different rack. During the day, some server reboot without any reason and the messages log file had no evidence of what happened.
From /var/log/messages:
...
Dec 8 14:10:02 hadoop011 snmpd[3029]: Received SNMP packet(s) from UDP: [172.27.1.21]:50825
Dec 8 14:10:02 hadoop011 snmpd[3029]: Connection from UDP: [172.27.1.21]:50825
Dec 8 14:15:26 hadoop011 syslogd 1.4.1: restart.
[Code].....
Some minutes after the reboot, messages log this error: Dec 8 14:18:14 hadoop011 Server Administrator: Instrumentation Service EventID: 1404 Memory device status is critical Memory device location: DIMM_A3 Possible memory module event cause:Multi bit error encountered.
Is it possible that 20% (circa) of 60 memory bank are broken? By the way, memory bank have Lifetime warranty from Kingston. If I reboot again the server affected by this error, the error disappear from messages log file and from OpenManage Web interface.
Is it possible that is a CentOS bug? I had search some relative bugs on Bugzilla but without any results.
I have tried booting from 2 different Ubuntu CD's (10-04-01 and 10-10) and a Fedora CD.All 3 CD's do the same thing, in Ubuntu I just see the first screen (Keyboard/Battery on the bottom with the guy next to it) and then the screen goes black but the lights, that indicate there's a computer connected and transmitting info onto the screen, are still on.
I know the CD's aren't the problem because they work on 2 other computers I have.The CD drive isn't the problem because took it out of a working computer and that booted up fine with the CD's.I've restored BIOS to default settings.I've tried booting with 1 stick of ram at a time but still doesn't boot.I've left the computer on for 3 hours but nothing appeared on the screen and the lights never turned off. It was just a black screen, nothing on it, not even a blinking cursor.I know it's capable of booting up CD's because the Windows XP setup disc boots.
I've installed Ubuntu on another PC and most things are great except fore the black screen that you get when you start the PC (just before the Ubuntu Logo). It stays black for 20 seconds. Is there something I can do to make it shorter like on my other PC.
View 9 Replies View RelatedSo basically what I am trying to do is install Ubuntu 10.04 on a Dell Poweredge 2600 server. Right now I dont care wither I get the server version or the desktop version, I just need to get it on their. this is what I have run into. When installing the regular Ubuntu 10.04 desktop for 32bit, the server just locks up on the very first ubuntu install screen and the keyboard lights just start blinking non stop. When I use the server version, the server get to the Detecting Network Hardware and locks up at 94% and the keyboard will also start blinking nonstop. I have looked all over for an answer to this problem and have yet to find one. This guy figured out how to make it work but he never mentioned what version he was using. [URL]..
On this server I have 6 HDs, 5 of them are RAID 0 with 1 Hot Spare. I have also tried using the ubuntu-10.04.1-alternate-i386.iso.torrent and still had the same problem. I have spent the last 3 days searching all over google and the forum to an answer but had no luck.
Had Ubuntu installed, it worked fine but I had to format for a new partition (out of space) I program in Windows, I would consider myself a Windows geek, and would like to try out Linux. After I boot into setup, it stays at a black screen. It did that when I was installed Ubuntu, the first time. I don't know how exactly it ended up working, after a lot of different things I was able to get it to boot.
View 3 Replies View RelatedI like to suspend my laptop when I close the lid. I have squeeze installed. When I open the laptop lid all lights indicated that it coming out of suspend but the monitor stays black. It is worse since I install the ati drivers for the card instead of the xorg. It did it with both but worse with nonfree drivers. I can get it to come out by ctrl alt f2 and the ctrl alt f7. However yesterday that did not work but that was the first time. My laptop is an acer 5251-1513 amd processor v120, and hd 4250 radeon
View 6 Replies View RelatedAfter kernel upgrade to latest version I get a lot of failure messages in syslog and dmesg:
Code:
Mar 16 22:50:30 s6 kernel: [515925.148335] megasas: Failed to copy out to user sense data
Mar 16 23:07:57 s6 kernel: [516970.118242] megasas: Failed to copy out to user sense data
[code]....
After applying upgrades to debian 8.2 on a lenovo yoga3 notebook and a reboot I am not able to login into my GNOME desktop. The login screen stays black. If I press the power button to suspend I can see the login screen with default background for ~1 second before it turns black again. What can I do to fix this issue? Is there a way to login via terminal and do a rollback? Can I use my home folder an personal settings if i reinstall debian and keep the /home partition?
View 14 Replies View RelatedI'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread
Code:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
[code]...
I'm running Debian Squeeze on a Dell Studio 1558 laptop, and I have my laptop set to suspend when my lid is closed. Resuming from suspend seems to work but the screen remains blank, forcing me to hard reboot every time. Upon reading this thread:
Tue Jun 21 23:07:12 AKDT 2011: performing suspend
Tue Jun 21 23:07:28 AKDT 2011: Awake.
Tue Jun 21 23:07:28 AKDT 2011: Running hooks for resume
[code]...
I guess I messed around with my computer a little too much when I was bored. I tried installing compiz and emerald and my computer locked up. Rebooted and then it stays on a black screen. Rebooted and tried safe mode now. Removed emerald by command prompt to see if that would work and rebooted.
View 3 Replies View Relatedis it ever possible to do dual booting with grub(legacy) ever at all!. it is possible provided i take some pain, here is the link of that post [URL] i was coward and weak i didn't try that out then. but i did try it out. now so if u haven't seen the post .... I've installed Fedora 15 desktop(Gnome) with physical Logical volume called vg_fedora lv_root(ext4) ,lv_swap and lv_home(ext4), with 500MB /boot partition and had about 200GB free hard disk space ... so i wanted to install Scientific Linux 6.1 (because our school uses RHEL 6.1)
so, while running the installer I made (added) a logical volume lv_Scientific with ext4 FS and made its mount point (/) and used the MBR /boot which overwrote the Fedora /boot (completely OK and was as expected) i restarted after installation i got SL log in and as per the directions of the thread i copied the boot stanza from grub.conf of fedora 15 (which i already had copied and pasted into a text file and copied it from there)and pasted it into grub.conf of SL you may ask why did i choose same physical LVM too save swap space ... if i had made another physical LVM i had to make another swap ( i like LVM ... its cool)
completely unexpected happened Fedora now boots but not SL when grub starts i get this error 27 unrecognised commad and when i press <enter> i get grub menu with SL and fedora when i press on Fedora it works well i get my fedora login and i did login .. everything works fine but when i press SL it goes to the previous black screen grub error 27
[Code]...
I've been running openSuse 11.2 for a while on my notebook.Today I turned it off at work and came home. When I tried to turn it on, it boots, shows a black screen written 'GRUB' and then NOTHING. It doesn't complete the boot process.
View 9 Replies View RelatedI installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition
10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.
Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.
Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.
This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.
Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.
Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.
I am trying to install ubuntu server 9.10 on two dell poweredge 2550 servers that I have at work and I can't get the install to complete on either. I saw some posts somewhere saying that it could be bad memory in the computers so I even put brand new memory in each, which needed upgraded anyway but the install still fails.The install usually hangs when trying to detect network drivers and it also hangs on some other file (I forget now). I remember I had an older version of linux on one of them before. The install says the file is corrupted on the cd. I have burned multiple cd's in different drives on different computers using the lowest speed on all of them, and all install attempts fail. I can even take the exact same cd's and install in vmware on my mac so I know for a fact the cd's are fine. What makes me more confused is that I can install windows server 2003 without a hitch on both the servers I am trying to install Ubuntu on.
View 3 Replies View RelatedI am trying to install ubuntu 8.04 general desktop flavour in dell poweredge 2650, but it is not working..doesnt ubuntu 8.04 supports installation in a dell poweredge 2650..if not so thn what can be done for that..any other latest version which does so??
View 2 Replies View RelatedI have a Dell PowerEdge 830 Dual Pentium on which I installed 10.04. I have installed (slotted in) an SB Audigy 2 ZS card, from another PC, but it doesn't appear to be working. The donor PC suffered a graphics card failure that killed the motherboard. I can't tell whether the sound card is actually faulty. Did the sound card ought to work without any 'fiddling'?
View 8 Replies View RelatedJust now did a clean install of Ubuntu 11.04 into Dell PowerEdge 1750 using KVM console and 15" monitor. When booting into Ubuntu, the monitor went "frequency out of range". After reading Ubuntu forum someone suggested holding left shift while Grub is loading, it wouldn't even budge.
View 9 Replies View Relatedhaving trouble during the openSUSE 11.3 installation on my new computer. Basically after it is done copying files and once it restarts for the first time during the installation to do the automatic configuration no video appears and the screen is black.The laptop hardware is:
intel QM57 chipset
i7 extreme 920xm
quadro fx 1800m
am tired of windows 7 and it's deficiencies and would like to continue using this great operating system on my new computer.
I have my brand new Dell latitude e6410 delivered with Windows 7 already installed. I want a dual boot and I decided to try SUSE for the first time. I used the installation DVD, the installation seemed to end up well. The problem is that already at the first reboot, the screen went completely black. By pressing ctrl-alt-del I can reboot the laptop. It seems to me a problem with the graphic card.
My setup is:
Dell Latitude e6410
Intel i5 m560 @2.67 GHz
nVidia NVS 3100M
4Gb DDR ram
Intel 82577LM Gigabit Network connector
If I start in failsafe mode, the X server starts, I have KDE, although with a somewhat sketchy graphic, I can use SUSE almost normally. The main problem in this case being that the system doesn't find any ethernet/wi-fi device, so I cannot connect to the Internet (I'm writing from Win7 right now). I tried choosing the default SUSE boot with the additional boot option "nomodeset" at the grub prompt. This is a suggestion mentioned in another post on this forum, although in that case the problem was coming from a bug dealing with an Intel graphic card. The system goes up but then kde doesn't start. I'm asked to lgin at a prompt. If I try to launch kde from command line (startkde), it complains that the variable $DISPLAY is not setup.
This is where I am now. I'm quite out of ideas, so I want to ask you few things. First stupid question: is the problem coming likely from the drivers of the nvidia graphic card? Second question: in that case, how can I fix it, considering that the linux partition is "isolated"? The fact that in failsafe SUSE doesn't see any network adapter concerns me a bit.
Has anyone got Ubuntu 10.04 working on their Dell Inspiron 1100? Most of the time, the screen goes black a short time after boot. Sometimes it goes black right after the splash screen, sometimes I get to log in and then it goes black a little later. Same results when trying to boot into "safe graphics" mode. Ubuntu 7.10 works fine on this machine (although I had to do some special configuration in xorg.conf to get it to work way back when I installed it.) However, it does not appear to be possible to manually configure X in 10.04. I tried disabling the splash screen in grub based on suggestions I found for other Ubuntu versions, but that had no effect on the problem.
Is it possible to replace X with the most recent version that could still be manually configured? Would anyone know how to go about doing that?
Alternatively, if it's impossible to get this old machine to run new versions of Ubuntu, has anyone had success with (relatively) new versions of other distros on it?
I am trying to install Ubuntu on my Dell Optiplex GX60 and am getting a black screen with white letters of errors and other stuff.
For instance.bad_area_nosemaphore+0x90/0x130
do_page_fault+0x378/0x440
error_code+0x73/0x78
etc.
I have two Dell PowerEdge 2650 servers. One is a dual Xeon 3GHz with 4GB of RAM (4 x 1GB sticks). The other is a single Xeon 2.4GHz with 3GB of RAM (2 x 512MB and 2 x 1Gb sticks).
Both are running 32 bit CentOS 5.3. Both are running the same kernel (vmlinuz-2.6.18-164.el5). I've even diff'ed the two kernels to ensure that they are in fact identical. The only parameters being passed to the kernel via the grub config are "ro root=/dev/sda2"
The BIOS shows 4GB detected on the 4GB server and 3Gb detected on the 3GB server on boot.
Dell OpenManage for the 4GB server shows "Total Installed Capacity 4096 MB, Available to the OS 3804 MB", as I would expect. However, OpenManage for the 3GB server shows "Total Installed Capacity 3072 MB, Available to the OS 1011 MB". (i.e. it is only seeing the first 1Gb of memory).
cat /proc/meminfo confirms the above; the 4GB server shows "MemTotal: 3895980 kB", but the 3GB server shows "MemTotal: 1035024 kB"
I installed the lshw utility, and on the 3GB server it shows all 4 memory sticks, the full 3GB:
*-memory
description: System Memory
physical id: 1000
slot: System board or motherboard
[Code].....