Ubuntu :: 10.04 ATI SVideo Shows Disconnected And TV Not Working?
May 8, 2010
i've installed 10.04 on my computer with a radeon 9550, it's an old one I know. Anyway I'm trying to get the TV output working. I've tried this solution: [URL]
the xrandr says that the S-video is disconnected alhouth it's connected. I've tried another solution here: [URL]
This thread didn't solved the issue also: [URL]
but I can't find a xorg.conf file on my system so I don't know how to add the lines. also in my case the s-video seems detected just disconnected.
Does this bug applies to my situation? if I understand correctly there is a patch for that, how can I apply it? [URL]
View 3 Replies
ADVERTISEMENT
Aug 25, 2010
I did a search and found this link however I remember this being an issue almost two years ago when I installed Debian with a GUI. I have always used it for a server so I never realized this was still an issue until I got my new PC today and went to load Debian / Gnome on it. It showed I was disconnected however I was able to browse the web fine. It appears that so many people have complained about this problem andI am trying to understand if there is a work around and a fix in the near future
View 3 Replies
View Related
Jan 12, 2010
how to connect using my TV as a monitor using SVideo cables. I connect the computer and it boots up fine so that I can see it booting up with Grub until Ubuntu loads then the screen goes black and starts to flicker. I was previously able to connect using Windows can I do the same with Ubuntu and do I need to upload drivers.
View 9 Replies
View Related
Feb 14, 2010
I recently installed Ubuntu. I just installed ndiswrapper so I could install my wireless PCI [COLOR=blue ! important][COLOR=blue ! important]card [COLOR=blue ! important]drivers[/COLOR][/COLOR][/COLOR]
I did that and it is recognized and so is the network I want to connect to. But for some reason, it just wont connect. It will spend a long time trying to connect, but then just says "disconnected". It's not like I have a bad connection or anything. My internet on Windows is fast.
View 3 Replies
View Related
May 26, 2011
My Ubuntu when i start it up, go to the wireless networks , try to connect to my network it trys to connect stops than says disconnected. My internet card is a Cisco Aironet wireless (idk the model number)
View 1 Replies
View Related
Jan 25, 2010
i have no idea if anyone can help. linux has been nothing but a hassle for me. i just wanted something that wouldn't be affected by viruses. to the point though. i read an thread on here about using fdisk to format sd cards. tried everything it said, not only did it not work but now my svideo to my tv no longer works. i have ubuntu 8.04 (yes i would upgrade but i can't bc for some reason anything newer won't work on my laptop)
View 3 Replies
View Related
Oct 28, 2010
When I load the disk I can view my backup drive properly but when I try to view my working drive it shows it as being empty. I also noticed that I had a 1 mg unallocated partition at the beginning followed by my ubuntu partition.
I then ran gparted in terminal and it did show the partition as having my system on it but I am not able to perform any tasks. No moving or resizing.
View 9 Replies
View Related
Jan 27, 2011
I am using unbuntu as root. I've made all the edits to my etter.conf file as follows:
[privs]
ec_uid = 0
ec_gid = 0
and:
remote-browser = "firefox -remote openurl (http://%host%url)"
I also turn on ipTables. I then start my attack as follows:
ettercap -T -Q -M arp:remote -i eth1 /client-ip/ // -P remote_browser
echo 1 > /proc/sys/net/ipv4/ip_forward
ettercap -T -Q -M arp:remote -i eth0 /target_ip/ /gateway_ip/ -P remote_browser
My problem is Firefox only shows https:// pages and not regular pages like google. I'm stumped. I have no clue why. I've tried other versions of linux. Different computers and still the same result. If I turn quiet off I see in my terminal all the traffic.
View 2 Replies
View Related
Aug 29, 2010
I tried Wubi, and all is fine, but when I choose Ubuntu on the boot menu, it shows some dialog, then just blank. its stays blank forever, so I had to shut the computer off.Then, I burned the Ubuntu iso to a CD and botted from it at startup. This at least showed the purpl-ish install screen. After I pressed enter over install, it went to the blank screen again. just black, nothing appeared.I'm not sure what the problem is. My laptop is fairly new, it shouldnt be having an issue to run it.I have 4Gb RAM, plenty of space on the hard drive, and a 1Gb video card...I have no clue what to do, as this is my first encounter with an Linux distro ever. help?
View 6 Replies
View Related
Aug 8, 2011
I have one major problem that is going to cause me to switch back to windows. My wireless network shows connected and works fine for a while but periodically stops working. It always says it is connected but sometimes stops working to where I have to disconnect and reconnect for it to start back up again.
View 9 Replies
View Related
Jul 3, 2010
I am still encountering problems getting the Broadcom 4321 chipset to work on my Fedora 13, even after using this guide, this guide and another guide on ndiswrapper.
To answer the standard questions:
Code:
Code:
Code:
Code:
and finally
Code:
But no wlan device or anything else.
View 2 Replies
View Related
Feb 9, 2010
I am running Linux Mint 8. I try playing a video file.t plays but there is no audio and the ,movie player acts as if there was. How can I correct this
View 2 Replies
View Related
May 2, 2010
My connection manager shows wired connections and shows wireless as being disabled. here is some terminal info getting wireless going?
Here is a bunch of things I have tried and the results.
nixon@nixon-desktop:~$ sudo ifup wlan0
Ignoring unknown interface wlan0=wlan0.
nixon@nixon-desktop:~$ sudo ifdown wlan0
ifdown: interface wlan0 not configured
[Code].....
View 9 Replies
View Related
Jan 8, 2010
I'm encountering a strange problem. I need to open and forward all UDP and TCP ports related to VoIPtelephony (5000:32000) in the Suse 11.1 server that's acting as router/firewall in our setup. The ports must redirect to a Asterisk server in the local network. (This server has the IP adress 192.168.0.3)I've opened ports in Yast (Firewall>Ports>Advanced) and putted in some masquerading rulesirewall>Masquerading):0/0,192.168.0.3,tcp,5000:31000,5000:310000/0,192.168.0.3,udp,5000:31000,5000:31000when I do a nmap localhost I get:Starting Nmap 4.75 at 2010-01-08 16:52 CETInteresting ports on localhost (127.0.0.1):
Not shown: 991 closed ports
PORT STATE SERVICE
21/tcp open ftp
[code]....
View 9 Replies
View Related
Jun 15, 2010
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
View 4 Replies
View Related
Oct 12, 2010
So the other day I just booted into ubuntu and the there was no internet connection, didn't think much of it, I can still connect in windows. The thing that's curious though is that it shows my wireless network under connection with full signal, I click to connect to it, it tries to connect for about a minute and the says "You are now disconnected"
View 4 Replies
View Related
Oct 25, 2010
currently using Ubuntu 10.10 and I have a problem with my wireless internet connection, which often gets disconnected and then re-connected automaticallyonce in every few minutes. This is really annoying
View 2 Replies
View Related
Oct 1, 2010
I'm having problems with my Internet. I just recently downloaded 10.04 (went from 8.04) and now I can't get online! I could yesterday! I don't have access to the router, but the internet works great on all my Windows computers. On my panel it show's my wireless connection bars with an exclamation mark and says disconnected. I don't know what to do! It's a Toshiba Satellite computer.
Also, I can't update anything, or install anything because I don't have direct access to the router. I know there is a lot of information about this problem already, but everything I've seen needs me to download new drivers. If you know how to do it from one computer to another I can do that. I'm just not very techy.
View 7 Replies
View Related
Feb 7, 2011
I boot into the CLI (by changing gdm.conf) and before it gets to the logon, it produces this error. So far, I haven't seen any effects but I'd like to get rid of it. Sometimes, I also get the error
Code:
mountall: plymouth command failed
I removed and reinstalled the Plymouth packages to no avail.. Anyone know how I can at least get rid of this error from appearing (like somehow changing a .conf file to not even try and "connect" to Plymouth)?
I did try the sudo apt-get update and all those other commands as listed on other sites. I went through the basic Google search so after the first 4 pages, I'm outta ideas.
View 5 Replies
View Related
Feb 19, 2011
This morning I connected to internet, using the 'hidden network' feature of Ubuntu, like I always do. In the beginning it worked well, but after a while, while playing a game, I got disconnected. As I closed this game, I discovered that Ubuntu was asking for the WPA key (it was already filled out correctly) There were no changes made in the network while I was playing. My brother and his girlfriend can both connect using their Windows 7 laptops, so the network itself should be allright.
View 4 Replies
View Related
Apr 18, 2010
I use a t-mobile usb mobile broadband stick; model usb stick 120.
the signal strength is 3g yet i randomly get disconnected from the likes of
pidgin
amsn messenger
ebuddy
can anyone tell me why, or how to fix it
View 4 Replies
View Related
Jun 7, 2010
My Ubuntu web server is left on all the time, sometimes I notice that it is disconnected from the network so I have to goto the server and re-enter the password in the network connections, this allows me back onto the network. Why is the server being disconnected? (The computer is running all the time because if it re-starts the terminal window is open on the screen). And how can I stop it from happening? It's got to the point where I need to check it every hour which really defeats the purpose of having it!
View 1 Replies
View Related
Jul 18, 2010
Everything worked fine until I downloaded some Ubuntu upgrades. Now, every time I try to connect to internet via network manager it says: " Network: Disconnected - you are now offline". so what to do...
View 9 Replies
View Related
Jul 23, 2010
I installed 10.04 yesterday. The computer had an MS OS on it but I chose to format the entire HD for Ubuntu. The install seemed to go fine. When logged in there were updates available, and I installed all of them. After a reboot I tried getting on the internet and found that my network was 'disconnected'. I've checked the cabling, and that the LAN is still enabled in the BIOS. I assume the network had to have been functioning to do the original update. How do I figure out what changed. I've been reading the network section of a Linux book and came up with a little data that might help. My hardware is listed after the host file.
$ ifconfig
eth0 Link encap:Ethernet HWaddr e0:cb:4c:b6:6b:d6
UP BROADCAST MULTICAST MTU:1500 Metric:1
[code]....
View 4 Replies
View Related
Oct 10, 2010
I am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies
View Related
Nov 20, 2010
The title message appears when I log in. Neither wired nor wireless network adapters show in ifconfig output. Network manager shows a simple networking disabled greyed out message. Both adapters work in live cd boot. Everything was working properly before; I'm not sure what happened.
View 3 Replies
View Related
Dec 3, 2010
Is there anyway I could use KISMET without getting disconnected from a network. I mean now whenever I start kismet, I lose my network connectivity. I dont want that. is there any possible workaround for this?
View 3 Replies
View Related
Apr 18, 2011
Im using Ubuntu netbook remix on my wife's hp mini. Ever since I switched my router out this netbook will connect to my wireless network, then show a disconnected icon, yet the internet still seems to work. I've searched around and seen that other people have had this issue but I haven't seen anything on how to resolve it.
View 3 Replies
View Related
Jun 12, 2011
I'm having network problems and I have no idea how to fix it. At first, my internet connection was suffering on all computers on my network (Mac, Windows and Ubuntu 11,04). So, I disconnected my cable-modem and then reconnected. Nothing.... So, I rebooted my Windows machine and the internet came back on that computer.
I then went to my Ubuntu computer and clicked on "auto eth0" (per the way I interpreted instructions from the internet). The symbol turned from the "two arrows" to what looks like a wireless, looking for a signal. I thought that maybe I should just reboot, as I did with Windows. However, when I did reboot, that same wireless symbol was there, then a message came up saying:
Code:
Wired Network: You are now disconnected
I can't seem to get my internet connection back on my Ubuntu computer, though it is working on every other computer on my network.
View 1 Replies
View Related
Jan 28, 2009
I'm using Xubuntu and i have set up my DSL connection manually. I get disconnected from the Internet within 2-3 minutes. I have to again select eth0 from the network icon in the taskbar. it connects well but gets disconnected again and again. I don't face such problem when i use Win XP.
Any idea what might have gone wrong ?
View 4 Replies
View Related
