My Ubuntu when i start it up, go to the wireless networks , try to connect to my network it trys to connect stops than says disconnected. My internet card is a Cisco Aironet wireless (idk the model number)
View 1 RepliesI recently installed Ubuntu. I just installed ndiswrapper so I could install my wireless PCI [COLOR=blue ! important][COLOR=blue ! important]card [COLOR=blue ! important]drivers[/COLOR][/COLOR][/COLOR]
I did that and it is recognized and so is the network I want to connect to. But for some reason, it just wont connect. It will spend a long time trying to connect, but then just says "disconnected". It's not like I have a bad connection or anything. My internet on Windows is fast.
I'm having some problems with wireless, it works fine on boot but after a while pretty much randomly, it can be a few days or it can be a few hours, it stops working. I'm not sure which command would tell you what and it would take a little while to debug it because like I said it's random, but if anyone knows what to do please tell me! I'm on Lucid Lynx 10.04.Another something that's really bothering me (But not related to wireless) is that for some reason when I restart my computer, the top panel keeps changing the applets locations.
View 9 Replies View RelatedThis should be easy for the Ubuntu Gods to sort out:
I have a Sabrent USB 802.11N adapter. (I am using 64-bit Ubuntu in all below)
I plug it into a 9.04 box and it works fine. Plug it into a 9.10 box. Network manager sees it and can attach to the network, but has 0% signal strength, no internet.
Rebuild the 9.04 box with a fresh install to 9.10. 0% signal, no internet. Try 10.04 Alpha 2, 0% signal strength, no internet.
Rebuild same box down to 9.04. Works perfectly. 100% signal strength. I do all updates and then the upgrade to 9.10 using the USB. Everything works fine until the reboot. Then, USB connects, but 0% signal strength, no internet. Oh! ifconfig says the wlan0 interface is up, but it has a random ip address.
I don't mind using 9.04 because for the forseeable future, the box is just going to count aliens for Seti, but my wife wants it off the counter and I would like to upgrade someday.
I have a wireless network using this driver:
Bus 001 Device 002: ID 0bda:8187 Realtek Semiconductor Corp. RTL8187 Wireless Adapter
and everything works fine for some time. After a few hours or maybe less (if I push bandwidth to the limit) the Internet freezes. I can't even ping my router. If I disconnect and reconnect either the device or the connection via network manager , it does work for a minute only and then freezes again. If I restart Ubuntu entirely, it works again. But for a while...
It works 100% in Win7 and I have no problem at all there. But I am very annoyed that I cant have reliability in Ubuntu. I want Ubuntu as default.
It has something to do with drivers or an inner variable or buffer or something.
At least, is there any way to reset my network connection without rebooting the OS?
I tried sudo /etc/init.d/networking restart but it gives me: Ignoring unknown interface wlan0=wlan0.
I have a problem with my wireless connection in ubuntu (natty with amd64bit) There seems to be intermittent disruption in my connection. Havent seen a pattern as yet, though it happens once a day. After that I cant get it to work at all and only restarting + reconnecting the USB device helps. Dont know what is going on.I have already read these pages : Commands and Wireless Troubleshooting.Here is my line of though1) Given that I am able to connect other devices to it while I am not able to connect through this desktop, I think the router is OK.2) I am able to work with it after restart + re-connection . And so the driver is OK and is loaded. The driver seems to be oK and loaded even while I am not able to connect.So why is this happening and how can I get this under control without having to reboot and re-connect the device everytime.Here are the output for the commands which will give you a more detailed idea of the process. Before reboot while I was not able to connect:
Code:
Script started on Tue 23 Aug 2011 01:40:08 PM CDT
raja@UshRaj: ~raja@UshRaj:~$ sudo nm-tool
[code]....
My Acer's Wireless randomly stops working until you fully shut down and start the computer.(Not Restart but Shutdown->Powebutton) I am using Ubuntu 10.04 Lucid.
I am wondering if anyone knows why it would stop working properly, and/or how to fix it?
And since this is a off and on problem I might not be able to provide details immediately from time of crash, since I need my computer on the wireless.
One symptom that really stands out is that the cooling fan is spinning as fast as it possibly can and processor usage is spiking around 80/200 on a process called phy0.(relevancy unknown)
As I was typing this post on my other computer, my laptop crashed and I lost the lshw -C Network output I had. If asked to, I will post the one from when it is working. Also I will post any other info you need from when I can.
I'm running a Source Dedicated Server on my Ubuntu laptop, and to connect to it via external IP from other computers in the network I need to enable loopback in my router.This was working fine, but then I disconnected my laptop for a few days, and when I came back the wireless stopped working on my Xbox. I reset the router to factory defaults, and then setup everything again. It was all working fine until I enabled loopback again and power cycled my router. Now every time I do that, the internet on Ubuntu stops working and the wireless on the Xbox stops working.
Edit: You can ignore this I guess. It seems I was actually DISABLING loopback by enabling that router option, which I guess caused this. Strange, because the first time enabling this option was the only way to get my external ip to work. Oh well, everything is fine now.
I'm running Ubuntu 10.10 Maverick Meerkat 64-bit on my desktop with a wired internet connection (with no firewall). For the past 2 days, I have observed that1. Firefox randomly throws up errors like "Problem loading page" whenever I click on a hyperlink. When I click on Reload, the page loads up just fine. This has been happening a lot recently..and I do not remember updating anything consciously. By the way, ipv6 is disabled in Firefox.2. The network stops working all of a sudden (usually indicated by the Firefox error). The Autho Eth0 indication is active, but I am unable to connect to any external machine.
3. Needless to say, this error is manifesting itself in apt-get as well. I get "something wicked happened" errors all the time, and am unable to download or install anything.That this is not a problem with the ISP is obvious because I also have Windows (from which I'm typing this, ironically), which is able to access the internet.Is this a bug in Ubuntu 10.10?
I upgraded from 9.10 to 10.04 and my wireless card no longer works.
The card is a Dell 1450 USB a/b/g card.
lsusb sees the card. device id is 413c:8104
dmesg says that p54usb is trying to load firmware isl3887usb but that failed (error -2)
I looked in /lib/firmware and didn't find that file
ps. god why did i upgrade?
I have a Dell E6500 with and Intel 5300 wireless agn card running Lucid x64. Wireless works fine and speeds are great except when I download with either the browser or thru a torrent or even updates. Once I get to around 100 megs in to the file wireless stops working and the only way to get it working again is to disconnect and reconnect to the AP. I have installed the back ports and tried several other fixed to get this to work but nothing has helped. One more note this happens on 2 other wireless routers that I have tried so I know that it's not limited to my Linksys.
View 3 Replies View RelatedI have one major problem that is going to cause me to switch back to windows. My wireless network shows connected and works fine for a while but periodically stops working. It always says it is connected but sometimes stops working to where I have to disconnect and reconnect for it to start back up again.
View 9 Replies View RelatedMy wireless LAN connection on this machine occasionally stops working. The network traffic bar shows periodic very small transmissions but the failure of all network dependent applications (Firefox, package manager, etc.) indicates to me that the machine is no longer talking to the net. I can fix it by reselecting my home network in nm-applet from the drop-down list. This causes the machine to disconect, reconnect and all is well for some random period of time thereafter. Here's some data:I'm running an HP Pavillion laptop.
Code:
~$ lspci | grep Wireless
02:00.0 Network controller: Intel Corporation PRO/Wireless 4965 AG or AGN [Kedron] Network Connection (rev 61)
Code:
~$ lsmod | grep iwl
iwlagn 124768 0
iwlcore 134820 1 iwlagn
mac80211 243496 2 iwlagn,iwlcore
[code]....
I don't know if this is related or not, but a couple of months ago I unsuccessfully attempted to share a hotel's wired Internet connection over my wireless card. I may have hosed some settings or it could be unrelated.The "unknown interface" portion of the restart attempt is interesting but I don't know enough to fix it.
I'm using a Vaio TT, which seems to use an Intel 5100 WiFi chipset, and a Linksys WRT54G2 (firmwares 1.0.1 and 1.0.4), ubuntus 10.10 and 10.04.
Wifi works fine out of the box. However if the other vaio tt in our office (running windows 7) comes online, my laptop stops being able to make new connections. It WILL stay connected to chat servers, and downloads SOMETIMES continue to work. However all new HTTP requests / ssh connections / rdp connections / pings fail. The laptop still appears to be "connected" to the wifi network.
This may also happen after an undetermined amount of time without the extra vaio. It is not solved by reconnecting or rebooting. Once the extra vaio leaves the building, everything works fine again. This problem does not happen at all if I boot into windows.
I'm having problems with my Internet. I just recently downloaded 10.04 (went from 8.04) and now I can't get online! I could yesterday! I don't have access to the router, but the internet works great on all my Windows computers. On my panel it show's my wireless connection bars with an exclamation mark and says disconnected. I don't know what to do! It's a Toshiba Satellite computer.
Also, I can't update anything, or install anything because I don't have direct access to the router. I know there is a lot of information about this problem already, but everything I've seen needs me to download new drivers. If you know how to do it from one computer to another I can do that. I'm just not very techy.
This morning I connected to internet, using the 'hidden network' feature of Ubuntu, like I always do. In the beginning it worked well, but after a while, while playing a game, I got disconnected. As I closed this game, I discovered that Ubuntu was asking for the WPA key (it was already filled out correctly) There were no changes made in the network while I was playing. My brother and his girlfriend can both connect using their Windows 7 laptops, so the network itself should be allright.
View 4 Replies View RelatedI am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies View RelatedI've fully updated F11 running on my laptop. I've BCM4312 in my machine. The issue is that the wireless connection gets disconnected so often that it's irritating my like hell.
View 4 Replies View RelatedSince I have started to use Ubuntu 9.10, I have had multiple wireless connection troubles. First of all, it says the signal is 2 bars, when in fact my router is right next to me as of right now. Second of all, when I try to connect to it, it asks for my password 3 times, then says disconnected. I'm on a hardwire right now, it's across my keyboard, and I'm in a tangled mess.
View 2 Replies View RelatedIve installed 10.04 on my laptop and notebook. It works perfectly on laptop. On notebook the problem is it finds no Wireless network and just says disconnected. I have no idea how to connect it, I tried reinstalling Ubuntu but no luck. I tried looking it up on internet but no luck in finding help. its an MSI U130. The wireless is defently turned on.
View 7 Replies View RelatedI have a Hp pavillion dv2000 and i installed Ubuntu 10.10 the wireless works really fine and fast until i decided to buy a windows vista and installed it, i didn't know that installing windows would affect other OS already installed, after installing vista I installed Ubuntu 10.10 again and the wireless wont detect anything and it would say on the wireless option 'discinnected' and the wireless led light stays orange instead of blue.How do I fix this problem??
View 2 Replies View RelatedI have successfully installed xubuntu on my 2nd partition of hard disk through unetbootin. everything works fine except wireless network. my ethernet works good, i am tethering through my android mobile no problem....just wireless says disconnected where as it is enabled. As far I know its sould scan all the available wireless AP near me and it should appear below wireless networks, and from there I should be able to select the AP which I want to connct...
Here are some commands log
My netbook is MSI wind U135DX
Recently I have been having issues with wifi. I can connect for about an hour and then after that the computer stays connected to the network but wont allow me to go anywhere on the internet.
View 1 Replies View Relatedsays wireless unavaliable, do a ifconfig and it doesn't show up.
need to restart computer to get wireless back.
or even a command to run to restart the wireless (/etc/init.d/networking restart doesn't work)
wireless chip: RT2500
This is not the common problem that's on the stickied thread. I'm able to connect to my wireless network perfectly. I switch between Windows to game and Linux for desktop, coding, and hosting, so I can tell it has something to do with ubuntu 10.10. When I'm connected to my wireless network, at random times, my internet begins to slowdown, then I get disconnected from the internet, but the taskbar says I'm connected. This problem only happens in ubuntu and not Windows for some strange reason.
The applications that are usually open do not cause it, because it still does it even though I have little applications open (Google Chrome, gedit). When I'm on Teamspeak 3, I notice my ping rises to the 1000s randomly, and I get disconnected. Once again that only happens on Ubuntu.
I'm using Fedora 14, 64-bit. My wi-fi adapter is Intel 5100 AGN on a Lenovo laptop. The wi-fi router is Zyxel. From time to time, I'm getting a black message, that a kernel component has crashed (or something similar). Here are the error details:
Package: kernel
Latest Crash:Sun 20 Feb 2011 04:27:54 PM
Command: not_applicable
Reason: WARNING: at net/wireless/core.c:633 wdev_cleanup_work+0x52/0xbd [cfg80211]()
Comment: None
Bug Reports:
In most cases, after that, I'm loosing the internet connection. I can't open any website, can't ping the router (which is my default gateway) and now it happened even without any error, which really pissed me off. Logging out and back in doesn't help, I need to make a full reboot to get back my internet connection.
Under Windows 7 everything is working fine and I'm not having any trouble with the internet connectivity! I had Fedora 11 32-bit before and it was also working normally!
Initially it was working fine after fedora 15 install.However recently it simply stops responding after a period of time.After reboot, sometimes it does repair itself but again stops working after some time.I'm not aware of any package updateperformed or configuration change that would have impacted it.And it does work intermittently as mentioned above
View 2 Replies View RelatedI just installed 10.10 for netbooks, and apparently it's using the RT2800PCI driver for my wireless NIC in my EeePC 901. That driver is causing havoc with my school network, I keep getting disconnected, and loading websites is really slow.
Now I know that 10.04 uses a different driver RT2860 which seems to work far better on this network.
How to change to the driver from lucid. Or does anyone know of an even better solution? I've heard rumors about something called ndiswrapper...
Im having problems with Ubuntu 10.04. My wireless disconnects frequently and firefox seems to stop working. it seems the connection times out sometimes when firefox stops. other times the connection just disconnects. When I was running 9.04 everything worked and nothing disconnected, so I know its not my computer.
My laptop is an IBM t40, 1.4 ghz, 2gig of ram.It does not seem to mater if Im using the wireless or the wired connection. The problem happens either way.does anyone have a solution for this?
I use a Kensington Wireless Netbook Mouse.It has worked well in Ubuntu 9.10 and 10.04.For some reason in 10.10 it works, but every now and again it sticks for a second or two. Sometimes the left button stops working.If I pull out the dongle for the mouse and put it back in my mouse works fine.
View 3 Replies View Related