When I load the disk I can view my backup drive properly but when I try to view my working drive it shows it as being empty. I also noticed that I had a 1 mg unallocated partition at the beginning followed by my ubuntu partition.
I then ran gparted in terminal and it did show the partition as having my system on it but I am not able to perform any tasks. No moving or resizing.
Computer hardware is not my bag. I accidentally installed ubuntu on external F drive, thinking it was C drive, unaware that ubuntu installs on drive with most available space. Installation involved partitioning the drive in about half. So, before I install it on C drive, I want to restore my F drive. I deleted partition using XP Disk Management tool and tried to use gParted on Parted Magic live boot cd to resize remaining partition that contains my data. But it doesn't seem able to expand the good partition to reclaim the 'unallocated' space. How do I accomplish this? Must I backup and reformat?
View 9 Replies View RelatedI need to make my root partition bigger to add more free space. Is there a Linux version that will fit on a small usb flash drive that has the tools I need? I plan to boot a Linux distro from a flash drive in order to resize the partition.
View 1 Replies View RelatedThe swap partition says that it is empty. When I installed Slackware I'm sure that I pointed to the right place for the swap. Or does it not show any size because none of it is being used?
fdisk -l
Code:
root@Jacob:~# fdisk -l
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x00051094
Device Boot Start End Blocks Id System
/dev/sda1 1 122 979933+ 82 Linux swap
/dev/sda2 * 123 2554 19535040 83 Linux
/dev/sda3 2555 91201 712057027+ 83 Linux
free -m
Code:
root@Jacob:~# free -m
total used free shared buffers cached
Mem: 3286 1303 1982 0 365 517
-/+ buffers/cache: 421 2864
Swap: 0 0 0
I have a compaq laptop with a hard disk separated in three partitions:Partition 1: Ubuntu 9.04Partition 2: Windows XPPartition 3: DataI usually work 95% of my time with Ubuntu, but store all my data in the data partition, so the information is always available no matter if I work under Windows or Ubuntu.The system has been working perfectly well for several months, but a couple of weeks ago I detected that some subfolders are shown as empty, but I know that there are several files on them (mostly pdf files document-scanned). When I use windows, all the files are shown correctly. In other folders, the system shows some files, but not all of them. (again mostly PDFs are not shown).My Ubuntu system is fully updated. The data partition is in NTFS format. Linux is EXT4. Windows is NTFS again.I would appreciate to know if any of you guys have detected a similar problem and if so, how to solve it.
View 6 Replies View RelatedWell I'll start off with the recent changes I've made. I have three hard drives in my PC, two of which are formated NTFS. I recently installed Storage Device Manager and changed a few options around so they auto-mount of start up. Well when I did this, and wanted to delete files off those drives, I suddenly was being promoted that I must delete them permanently or not all at (wouldn't go into the trash)
I added the lines to FSTAB: uid=1000,gid=1000 0 1
So for example my secondary drive is:
nls=iso8859-1,umask=000,uid=1000,gid=1000,0,1
And also added .Trash-1000 folders in each of the two NTFS drives.
When I delete items off one of the two NTFS disks they go to the trash... I don't get the "delete forever" prompt and I can actually see them in the trash bin.
But when I empty the trash the icon remains that of the "full" trash, despite when I open it there being no trash in it.
I wasn't doing anything special on my computer (Ubuntu 11.04) when it just turned off. When I rebooted I was presented with BusyBox. I'm still pretty new to linux, but it appears that root is totally empty. Is there a way to view a log before the system crashed?
View 9 Replies View RelatedWhen browsing my external hard disk I noticed that Nautilus' side pane marks directories that contain files as empty. Is this a bug or a misconfiguration on my part?
View 1 Replies View RelatedI have around 30gb of free space in my partition table immediately before the Linux partition. I want to resize my linux partition to take up this space.
I tried booting with live cd, sucessfully umounted the hard drive but found I could not resize the partition. On clicking the 'edit size' button, partition manager recognised the free space before the partition but when i reduced this, the 'ok' button was greyed out. (it was not greyed out for the windows partition so I could, in theory, increase the windows partition to take up the free space but this is not what i wanted to do).
I am pretty sure that I had managed to unmount the drive correctly as the padlock symbol had dissapeared (I took the attached screenshot, which does show the lock symbol, after rebooting into my normal system).
Anyone got any ideas as to why it wont allow this? There is no reason why i can resize the partition to take up the free space BEFORE it is there?
How would I combine a empty partition with my existing partition? A reinstall is just an option and I need more disk space
View 2 Replies View RelatedCannot get FlASH install correctly so I can view shows on HULU. In the past I could but recently HULU request that I install FlASH. When I click on the link provided and run the install, the install appears to download but I still cannont view shows on HULU.
View 1 Replies View RelatedI'm currently working on fixing another problem url
I have a 60 g internal laptop hard drive, 30g is Windows 7 and 30g is Ubuntu.
When in Ubunutu I can access the window's driver and mount it, however, when I am in windows 7 it only shows the Window's partition.
Is there a simple way I can get the ubunutu partition to show up>
I'm using fedora 14. And I have installed apache, PHP and MySQL. I tried testing PHP with phpinfo(). But when I view it view my browser (localhost/test.php) it just shows the code itself instead of displaying the phpinfo page. This is the content of my test.php page.
<?php
phpinfo();
?>
Seriously, after a reboot, my gnome panel shows a notification area applet, but there are no status icons displayed. Normally I findwicd, hplip, volume, evolution, battery, etc after a cold boot.These did not show this time. I cannot find log entries that showtroubles with the notifier icon applets ... then I'm not sure what I would look for or where to look.I tried to remove the notification-area item from the panel and then reload it. This did not change anything.
View 6 Replies View RelatedUbuntu 10.04 64-bit (installed on installer)
What will be an easy and safe way to resize partition? Boot up the LiveCD? Or can I run resize2fs on Ubuntu while the latter is running?
Code:
This is a newly installed box without files on /kvm. Now I want to resize /home taking up the complete capacity of /kvm which will be removed/deleted.
So the other day I got myself a nifty ThinkPad x100e. I immediately removed windows 7 started, and installed UNR 10.04.It has a 250GB hard drive, which I decided to partition, so that I can keep all my stuff on the new partition, and then a fresh format or install of the OS would be easier.After struggling to take ownership of my own damn partition after creating it and mounting it, I discovered a rather interesting problem. I KNOW the partition is empty, but when I right click and go to properties, it says that 10GB is already used? This is rather confusing to me
View 7 Replies View RelatedI have read several tutorials on how to install it on my Laptop with pre-existing XP without destroying XP in order to get a dual-boot system. For example on those two pages...
[URL]
and
[URL]
...it reads that in the Ubuntu install menu I have to select "manually edit partition table", which I have found and selected, and then I should supposedly be able to edit the size of the desired partition. However, no option for changing the partition size appears. Instead I get a menu where I am asked to determine how I want to mount the partition (as ext4, ext3, etc.) and if I want to format it. However nowhere it mentions anything related to "change size" or similar.
i can't resize my partition sda1?
View 3 Replies View RelatedI made three partitions when I installed Ubuntu. Ubuntu 20.1 gig. windows 20.1 gig. data 110 gig
I no longer want or need the windows partition. so I used system > administrator> disk utility to delete the windows partition. Now to hopefully prevent a problem. How do I enlarge the Ubuntu partition without causing problems?
Can I do it while I am ubuntu or do I need to do it from the live cd or what?
I am trying to resize a Windows XP partition. The partition has plenty of space available. When I boot off the CD, I open Gparted. I try to move the partition down, but it does not move at all.
Within this Windows installation, it only shows 1% fragmentation.
I want to dual boot using two partitions.
I have a laptop with a 320GB disk. Windows 7 and Ubuntu 10.04 It has 8 partitions: [From Testdisk]
[code]....
Long story short, after reinstalling windows 7 and messing around a little with its partition and the other ntfs one (resizing etc); Gparted won't open the disk. It shows all the disk as unallocated space, And throws a message to the terminal which says something like "Can't have a partition out of the disk." Funny thing is that *almost* everything is working fine. Everything works except that ubuntu can't use the swap. (Dmesg says: "Swap area shorter than signature indicates") Also, testdisk, if i run a deep search for partitions, finds the last partition twice, but the second time the partition goes from 37129 0 1 to 40240 254 63 , while the disk ends at 38913 255 63. The problem is that I can't use Gparted now and I want to resize a partition.Also I believe that going without swap is not good for ubuntu.
I am dual booting Windows 7 and Ubuntu on my laptop, and I'm trying to resize my ubuntu partition to make it larger. When I boot from the GParted Live disc , however, It only recognizes the existence of my 160 Gig windows NTFS partition which has ~15 Gigs of free space, which I want to reformat and expand ubuntu into (I freed that space by shrinking my windows partition from inside windows 7). I know my Ubuntu partitions are there (I'm in Ubuntu now, plus my HD is 200 Gigs not 160), but I can't see them.
I have a feeling this has something to do with my resizing of my windows partition from windows, but I'm not sure.
more info:
Code:
sudo fdisk -lu
Disk /dev/sda: 160.0 GB, 160041885696 bytes
240 heads, 63 sectors/track, 20673 cylinders, total 312581808 sectors
Units = sectors of 1 * 512 = 512 bytes
[Code]....
I'm dual booting Win7 and Maverick and I'm running low on diskspace on my Ubuntu partition.I booted into an Ubuntu 10.10 live CD and opened Gparted. After shrinking the storagepartition I wanted to grow the extended ubuntu partition into the unallocated space to the left, but for some reason it won't let me do that.
View 7 Replies View RelatedI want to resize my linux partition using gparted. The partition in my hdd right now looks like this:
Uploaded with ImageShack.us
I dont want to screw this up, I know I have to use the gparted boot disk. But really, can anyone give me sort of step by step guide of how to resize my linux partition ( I was thinking in expanding it from the current 25gb to 30gb).
I created only two partitions, root and /home. I want to resize root to a bigger value. I tried to play a little with parted without result. How can I do it safely?
View 6 Replies View RelatedI have Ubuntu in one partition . The partition is about to be full..I have a spare partition which I thought could merge with the existing..But I guess it is not possible. I am slightly confused with the way linux stores the files. There is a root directory and within that there are boot ,Var,tmp and home..
Suppose I install an application from a package manager , I really do not understand where the path is ...Supose I want to store certain new applications in the spare partition , how do I tell the system? Also while installing it doesnt give a choice regarding the path ...All I see is a couple of files exracted and when it completes , it sits on the menu neatly. From a storage perspective how do you gain control? Say in Win , normally any package will ask for the path which you can customize..How do you plan the storage of files in Linux?
When Karmic came out I made the decision to leave OSX and become fulltime linux. The one thing I took for granted is OSX's ability to resize a partition to create space for another partition. I am wondering if this is possible? The reason is I want to put all my storage data (i.e. papers, pictures, music, etc) into a partition separate from the OS. I seek to do this so that I can test out Lucid and subsequent alpha's/beta's.
View 5 Replies View Relatedwhile using it or in any way that does not include restarting the PC?I don't really have high hopes for this or anything, it's just that if there is a way I think it would be interesting enough for me to want to know
View 8 Replies View RelatedI installed kubuntu onto my secondary drive witch was half full at the time of the installation. I used all the available space for the install. Now i have kubuntu installed and want to increase the linux partition. But GParted and Partition Ediditor show the resize button as inactive.
View 1 Replies View RelatedI've been trying to resize my root partition with gparted. I resize a ntfs partition to get more freespace available and I got 30GB of freespace and when I try to resize my root partition (unmounted) I can't do it, it's like I don't have any freespace.
View 6 Replies View Related