Software :: Using Oprofile To Monitor Squid
Feb 7, 2010I am trying to find a decent guide for how to use oprofile to monitor squid and read the results so that they mean something useful.
View 1 Replies
ADVERTISEMENT
CentOS 5 :: Oprofile Unable To Complete Dump Of Oprofile Data
Apr 26, 20111. I installed oprofile 0.9.4 on Centos Linux 5.5 this past Saturday. Since then I have been trying to learn how to use oprofile 0.9.4 on Centos Linux 5.5. If I follow the following steps running as root,
[Code]....
I obtain the following warning: warning: the last modified time of the binary file does not match that of the sample file for /home/frankc/DQTTest5/MatchUpLib/lirh5g_deb/libmdMatchup.so Either this is the wrong binary or the binary has been modified since the sample file was created. warning: the last modified time of the binary file does not match that of the sample file for /home/frankc/DQTTest5/MatchUpTest/lirh5g_deb/MatchUpAccurate.exe
I am wondering how to prevent this warning message from occuring because it indicates our profiling results may be incorrect.
2. My second question is : when I use opcontrol --start --session-dir=/home/frankc/DQTTest/Mary5Test and profile my application using /home/frankc/DQTTest5/MatchUpTest/lirh5g_deb/Mary48.exe --run, I encounter an error when I do opcontrol --dump. The error is: Unable to complete dump of oprofile data: is the oprofile daemon running? Why is the oprofile daemon stopping when I use opcontrol --start --session-dir=/home/frankc/DQTTest/Mary5Test rather than when I use oprofile --start. I checked the permissions on /home/frankc/DQTTest/Mary5Test and it is drwxrwxrwx.
Ubuntu :: Configure SARG To Monitor SQUID?
Mar 8, 2010How to configure SARG to monitor SQUID?
View 1 Replies View RelatedGeneral :: Monitor Specific Ip Address In Squid Access.log?
Jun 20, 2010I'm trying the tail -f 172.16.X.XX /var/log/squid/access.log to view the sites requested by the client ip 172.16.X.XX but the result is it still open all the ip's requesting for the internet access. is there any tail commands that can monitor only the specific IP address requesting for internet access.
View 2 Replies View RelatedSoftware :: How To Install And Use Oprofile On Windriver
Jul 6, 2011I want to install oprofile tool on wrlinux. Where to get the package of oprofile which is compatible with wrlinux??
View 1 Replies View RelatedServer :: Monitor The Current Bandwidth In Use By A User (NCSA Auth) On Squid?
Jan 29, 2010Is there anyway to monitor the current bandwidth in use by a user (NCSA auth) on squid? Occasionally we get a user downloading too many videos at once, which blocks bandwidth to other users on the network. As I have no idea which user it is until the end of the day (SARG reports), we just restart the squid server to disconnect their downloads.
View 6 Replies View RelatedOpenSUSE :: Oprofile And Debug Symbols For Glibc ?
Mar 2, 2010How do I get debug symbols for glibc? I'm using oprofile when profiling applications. Unfortunately, the default glibc version that comes with SUSE 11.1 has the debug symbols stripped-out. That means that all libc functions get aggregated into one big blob under "glibc.so" and you can't tell whether you spend most of the time in memory allocation, syslog or lock related routines.
So, I've tried a myriad of different ways of getting the symbols. From trying to build glibc myself to hunting for dozens of different rpms on this site and on the Internet. So far - no positive results.
My sytem: OpenSUSE 11.1, x86-64.
Slackware :: Oprofile Wants Older Libbfd Than Binutils Provides?
Oct 20, 2010oprofile-0.9.6-i486-2.txz links to libbfd-2.20.51.0.8.20100412.so ; binutils-2.20.51.0.11-i486-1.txz has libbfd-2.20.51.0.11.20100810.so. These are all the current packages as of this minute. Linking the new libbfd to the older seems to work.
View 2 Replies View RelatedNetworking :: Install Sarg To Monitor Squid Not Success. Cannot See Sarg.conf File?
Nov 30, 2010i have just install Sarg-2.2.3.1.tar.gz but When finished compiled i cannot see sarg.conf (in directory /etc/.. or /etc/httpd/conf.d). May i know where is it.?? I'm not sure compiler which it's work good or not good. Some logs show in here:
Quote:
[root@proxy sarg-2.2.3.1]# make install
cp sarg /usr/bin/sarg
chmod 755 /usr/bin/sarg
cp sarg.1 /usr/local/man/man1/sarg.1
chmod 755 /usr/local/man/man1/sarg.1
[Code]...
General :: Squid Access / Permission Denied Error From Squid Occur?
Dec 29, 2010I am using squid to controlling access to the internet all is working fine expect one of the user who is using outside organization portal to connect internet. But whenever he tries to enter in the portal by typing (EXAMPLE)url. Permission denied error from squid occur.
How can i allow this portal in squid. So squid will allow this to access.
Server :: Tools - Squid Accounts - To Create - Change - Modify Users Of Squid And To View Their Logs
May 23, 2010My squid server works fine in fedora 11 system . Is there any web like interface for admins to create,change,modify users of squid and to view their logs.
View 1 Replies View RelatedCentOS 5 Server :: Squid Proxy Configuration SQUID 2.6.STABLE21
Jan 17, 2011I would like to ask some help and tutorial for setting up and how to configure squid proxy server in my (Home PC Server). I am a newbie in Linux Centos. I already installed in my system the CentOS 5.5 . Now, I want to configure it as my internet server, all of my 4 system running in Windows including the laptop I want to connect through my CentOS pc with username authentication. I assign all IP address by static. see tthe attachement in my set up. [url] I just want to know what I need to change and add in my squid config file. And how can I configure properly my CentOS with 2 LAN card as internet server.
View 1 Replies View RelatedSoftware :: Mouse Click On Monitor 1 Kills Full-screen In Flash On Monitor 2 ?
Feb 23, 2010I'm playing with dual monitors. I have an NVIDIA GT220 set up so that my monitor and my TV are running as extended desktops. Everything is working well enough, but there is one annoying bit I've noticed:
If I'm watching ..... on monitor 1 in fullscreen and working on monitor 2, clicking anything in monitor 2 kills full-screen in monitor 1. Is this something that can be fixed somehow or is it a hardwired "feature"?
Fedora :: 11 With Monitor - System - Preferences - Display Shows Unknown Monitor
Oct 16, 2009I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
Fedora :: External Monitor Won't Work - Both Monitor And Laptop Screen Black
Aug 7, 2011I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
Fedora :: Set Totem Player To Open In External Monitor And Not In Built-in Monitor
Aug 11, 2011I have an external monitor connected to my laptop (extended display). I always drag the Totem player from the laptop screen to external monitor to watch video files. I wonder, if the Totem player can be set to open in the external monitor automatically, everytime I open it?
View 1 Replies View RelatedFedora Hardware :: External Monitor Not Detected - Dell Laptop - Monitor
Aug 17, 2011My software and hardware information are as follows. I have Fedora 12 and KDE 4.4.5 installed on a Dell Vostro 1500 laptop. I believe it's a 64 bit processor; it's an Intel Core 2 Duo CPU. The external monitor is a Dell as well.
My problem is that my system does not seem to be detecting an external monitor that I have connected. Everything else is working just fine; however, I would like to have the option of attaching an external monitor. When I plug the external monitor into the laptop, the external monitor remains black and appears to be in power save mode. The results of xrandr -q (with or without the external monitor attached: it doesn't appear to change) are as follows.
Code:
How can I get my laptop to recognize that the external monitor is even connected? Let me know if I can be more specific or provide additional details.
Hardware :: Dual Monitor - 2nd Monitor Not Coming Up - Xorg.conf Missing Something?
Oct 19, 2009This is a repost of my initial problem, I need some one who knows what they are doing more than I too take a look at this command output and give some sort of direction/clue/etc on what I'm doing wrong or missing.
Is my xorg.conf missing some vital line(s) or setting?
My best guess is that i'm missing something to tell the Xserver to use both screens, as the Xorg.0.log does not talk about trying to bring up the intel display; but this is just a hunch.
I'm running kubuntu 9.04 with 2 monitors: on-board intel video and a PCI nvidia display: I am using my nvidia display fine, but still can not get my 2nd display (the intel) working. What the heck am I missing?
lspci:
Code:
Code:
OpenSUSE Hardware :: Triple Monitor Setup: X Crashes When Moving To The Second Graphics Card (third Monitor)
Oct 22, 2010This is a triple-monitor setup with two video cards, where the mouse pointer gets "stuck" if it tries to cross from one video card to the next one. It worked correctly in openSUSE 11.2 and doesn't work in openSUSE 11.3 with the same xorg.conf. This is a 64-bit openSUSE 11.3 with xorg 7.5-11.3 (the openSUSE prepackaged version). I've already tried NVidia drivers 256.53-16.1 (the openSUSE NVidia repository version) and 260.19.12 (the latest off of the NVidia website).
This is the same xorg.conf that I used successfully in openSUSE 11.2. I tried a new automatically generated xorg.conf using nvidia-settings and it had the same problem. This forum won't let me upload the relevant files, but here: [URL] is a tar-ball with my xorg.conf, Xorg.*.log, /var/log/messages, and the NVidia debugging output.
OpenSUSE Hardware :: Nvidia 19.29-22.1 Suse 11.3 Dual Monitor Mouse Flickers When Moved To 2nd Monitor?
Jan 15, 2011just setup suse 11.3 , put on the Nvidia 19.29-22.1 drivers via yast , no kms is set in inetd , nomodeset on grub boot line etc... Even tried installing the driver " the hard way " dual monitors come up, setup xinerama to "Extend" my desktop , and the main monitor ( right side ) is good, visually the left monitor (2ndary) is good.. but whenever I move my mouse over to the left screen the mouse pointer dissapears, flickers along the right hand border of that screen... and if i move the cursor back to the original screen i have to really fight to get it back to the main screen....Copy of my xorg.conf , still very basic...
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.29 (buildmeister@swio-display-x86-rhel47-04.
nvidia.com) Wed Dec 8 12:27:27 PST 2010
[code].....
General :: Screen Rate - Refresh Mode Of The Monitor In The Monitor Options Have Only One Option 60Hz
Mar 20, 2010I am having problems with the refresh rate if the screen. In the refresh mode of the monitor in the monitor options have only one option 60Hz. I have LG 24 + ATI Radon 3870, and have already installed the ATI driver via Ubuntu download center.
View 1 Replies View RelatedUbuntu :: Xorg Doesn't Detect Monitor / Won't Display Higher Than 800x600 On A 1400x900 Monitor
Apr 3, 2010I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
Debian Hardware :: External Monitor As The Main Monitor For A Laptop
Sep 22, 2010I recently installed Debian, using the amd64 Network Install .iso. I'm using XFCE4 as my desktop environment, and everything is working well... on my laptop's screen.
My desired setup is to have my laptop sitting on a well-ventilated shelf, closed, and to have an external monitor be my main monitor. I want this because I'm using my laptop as my "home" computer, so it never moves, and I don't like the keyboard/trackpad. My laptop has a VGA output, and I can get my desired setup on my Windows partition (not stating a preference ; just that the hardware CAN do what I want it to).
I've been working my way around the Internet for a few days, now, and I've got the commercial NVIDIA driver installed. If I run sudo nvidia-config --twinview I can get my external monitor to be part of the display, which is great, but it's part of a dual-screen monitor setup, which is not what I want at all, because (a) XFCE's multiple virtual desktops are good enough for me and (b) my graphics card is integrated, and I'm trying to squeeze every drop of performance out of my laptop that I can (1 gig of RAM; the less that my graphics card eats into it, the better). Plus, it'd be annoying to accidentally drop something on my laptop's screen, and then have to dig it out of the shelf in order to undo it. I'm not saying that I'm consistently clumsy, but I'd eventually end up doing it.
Fedora :: F14 Dual Monitor - Firefox Starts On Wrong Monitor
Jan 27, 2011I just upgrade to F14 from F10 on a dual montor setup. Firefox behaives differently on F14 than on F10.
On F10 it followed the mouse pointer's location and show up on the correct monitor
When maximized at close, it is always displayed on the left monitor. When not maximized at close it will open on the monitor where the mouse pointer is located.
About minimize/maximize Firefoxe before closing and it seems to work in some case, but not for me.
OpenSUSE Hardware :: Both Monitor Displays Coming Through On Single Monitor?
Jan 21, 2011I have just installed Os 11.3, it is my first time to try Linux. Install went fine have Dual Boot Win7 and openSuse 11.3 KDE I have a 26" TFT TV as Monitor 1 DVI and Dell 16" as Monitor 2 VGA all working fine . Autoconfig started and TV display vanished, install finished and went into display settings to check problem and for some reason it is saying both displays are on my 16" Dell. I will Add Screen Shot to show problem. wanted to switch to Linux for years but never had the guts, i was hoping to learn Linux with this distro and when have a grip on it drop windows and use Linux as Primary.
View 4 Replies View RelatedUbuntu :: Change Default Monitor When Dual Monitor Is Enabled
Nov 19, 2010I have a dual monitor setup in Ubuntu, with my main monitor on the right and the monitor I want to extend to on the left monitor, but I can't seem to get it to do this, it always has the 'desktop' on the left monitor and then extends onto what I want to be my main monitor. I have an ATI Radeon 4350 Graphics card.
View 1 Replies View RelatedUbuntu :: Compiz - Dual Monitor Wallpaper On Single Monitor ?
Dec 10, 2010Is there any way to put a dual monitor wallpaper on a single monitor configuration using desktop wall? Using only 1/3 or so per wall. Something that will have the effect like the scrolling wallpaper feature on Android/iPhone.
View 2 Replies View RelatedGeneral :: Detect Monitor (Ubuntu 9.10, It Is Showing Unknown Monitor )?
Apr 20, 2010I am now using Ubuntu 9.10. The prob is I am not able to increase the resolution of display. It is showing only 800 x 600 display. While trying to increase the resolution it is showing "Unknown Monitor". So, how can I detect the monitor so I can increase the resolution of my system.
View 3 Replies View RelatedUbuntu Multimedia :: Disable Secondary Monitor Quickly Other Than Loading Up Nvidia-settings And Disabling The Monitor Every Time?
Jun 29, 2010Currently I have two 1920x1080 screens running in Twinview on my Geforce 275 graphics card. Want I want to do is a quick simple way of disabling my secondary monitor when playing video games or using xbmc to watch movies, etc. I've tried a few applets but they require the xandr function which I think Nvidia doesn't support.
Is there a way to disable this quickly other than loading up nvidia-settings and disabling the monitor everytime. I don't really want to use two seperate x sessions and xinerama due to the fact you can't use compositing.
Ubuntu :: Disable Compiz On One Monitor In A Two Monitor System
Feb 23, 2010I have persistent video tearing my second monitor (Mitsubushi HDTV). I have tried everything that was suggested with some improvement. I have no issue with tearing if I add the following to my xorg.conf
Quote:
Section "Extensions"
Option "Composite" "Disable"
EndSection
Is it possible to disable composite for one monitor only and keep it for the other. Or at lease is it possible to have compiz for one monitor only and disable it for the other.
