General :: Program To Make Image Of Partition
Mar 1, 2010What is good program and that is easy to use to make a image of a linux partition
View 3 RepliesWhat is good program and that is easy to use to make a image of a linux partition
View 3 RepliesIs there any way to make a disk image of an active partition? I have to get a complete backup (partitions, MBR, all data files) of my server without bringing it down to do it. I want to have a backup that, in the event of a system failure of any sort, I can quickly restore onto a new, bare hard disk and have the system back up and running. The windows equivalent of this would be something like Drive Image XML, this is the functionality I am looking for.
View 4 Replies View RelatedAm quite new to Ubuntu (10.04) and have recently reinstalled XP. I want to make an image of my windows partition to save time and effort when wanting to restore this. I read the Ubuntu documentation on Drive Imaging [URL]..community/DriveImaging and am wondering if I've done things ok?
I've booted using the Live CD. Windows is on sda1 and is a 50GB partition. I have a hidden ntfs partition on the same hard drive at sda9 of 10GB. The first time I tried this I got an error regarding my output file saying "Not a directory". I'm assuming that was because I hadn't mounted sda9. It also reported an error saying permission denied on sda1. I then mounted sda9
Code:
sudo mount /dev/sda9 /mnt
I then changed to root as I thought not being in that was why I was getting the permissions error.
Code:
sudo -s
I've then done the following;
Code:
dd if=/dev/sda1 bs=1024 | gzip > /mnt/sda1.bin.gz
The terminal window is just showing a flashing cursor in the bottom left corner under the above command line input. Is the fact that my mount partition being smaller than my windows partition going to cause a problem or will gzip solve that? My Windows install occupies about 7.5GB of the 50GB partion.
I'm not sure if dd is just taking a long time to complete the task???
I am new to linux and am trying out script writing. I am using shell. How can I make a script to open a program then operate within that program?
View 5 Replies View RelatedJust purchased a webcam and it worked immediatelly with kopete. This was in the configuration dialog, a small window showed me moving around in all my gloriousness. Now realise why those horror films show this sort of footage.
Thing is: how to make the image bigger, fill the screen? Is there a program? Don't say rtfm, I don't know enough to do that.
OS: Windows XP
Virtual Machine: Bochs-2.4.5
I want to learn some details about linux booting, so I begin writing a small boot program myself. Yesterday, I was writing a small boot program and planned to use it boot a Bochs virtual machine. The boot program is written in assembly language and compiled with nasm.I use bxiamge.exe in Bochs and create an floppy image called boot.img and configure the Bochs virtual host to boot from this floppy image. My question is how to write the compiled boot.bin program into the floppy image(boot.img)?
What is best to make a image or a backup.
Whit what for program.
By a image form what partion do i have to make a image.
By backup what directory to backup.
so that when by linux is corrupt i can do a reinstall.
I have recently upgraded RHEL 4.8 to RHEL 4.9 Beta.Since 4.9 ISO are unavailable and has to be fetched through update from RHEL 4.8.Can I anyhow create ISO of RHEL 4.9 Beta?Why Beta..becoz my team test pre-releases too.
View 1 Replies View RelatedI have a number of uncompressed audio files recorded off of an analog (POTS) telephone line of fax transmissions. Is there a Linux utility or library I could use to convert these files into images of the fax they contain? I'm not looking to send/receive a fax via a modem, but just to "replay" the communications tones and parse out the fax message.I'm guessing this may not be possible due to duplex issues and not knowing which end of the conversation is sending what,but thought I'd ask to see if anyone knew of something.
View 4 Replies View RelatedI am trying to make a floppy image with a working file system so that I can test a 2 stage boot loader. When I attempt to mount the floppy and then cp the second binary over to it, mount gets all unhappy. Here are the steps I am trying to use:
dd if=/dev/zero of=floppy.img bs=512 count=2948
mkfs.vfat floppy.img
dd if=boot1.bin of=floppy.img bs=512 count=1
[Code]....
I have a couple of directories that I want to turn into an image. For example:
Quote:
/usr/dir1
/usr/dir2
I want to end up with two imgs (dir1.img and dir2.img). I wanna be able to type in:
Quote:
mkdir /usr/dir1
mount dir1.img /usr/dir1
How can I do that? If I can't use mount than what should I use?
I recently used clonezilla to make a backup image of hdd, before doing factory restore, now the image is of not necessary as I can image the restored computer (Acer Aspire 3620).Is it possible to extract image to blu-ray and make bootable as in live-cd?
View 8 Replies View RelatedI have an image of the entire disk created using dd. The disk structure follows:
The image was created using:
How would I, if it is possible, mount /dev/sda1 from the image so that I'm able to read the contents?
It's not an option to clone the HDD again, I know how to do it if I had only cloned the single partition by itself. I hope it's still possible with the current image.
i was wondering if it is possible too use the DD command to make an image file of my blackberry 8330?i need it of the onboard memory and not the external memory card.
View 1 Replies View RelatedI downloaded an raw SD card image that has two partitions. It caused some file system errors when I tried to dd it directly into an SD card. I am not sure if the card is defective or the image. Is there a way to examine this image without writing it to a physical card? Like trying to mount the partitions separately or checking the tables?
View 2 Replies View Relatedi need to mount at least for read access NTFS-based partition image on linux from a file. File is binary copy of a partition. Is there any libraries or resources for this?
View 1 Replies View RelatedYesterday I got my new workstation featuring:
120 GB - OCZ Vertex3 MAX IOPS
300 GB - Western Digital Velociraptor (10k RPM, about 4ms avg. seek)
2x2TB Samsung Ecogreen F4
The system will be running Ubuntu with the main purpose of doing lots of Java development. Occasionally I have to develop Java in a Windows VM; for this I need fast VMs. I read a lot about SSD wear and maybe it is a bad idea to put the Eclipse workspace on the SSD, because of all the little writes the builds do. Perhaps the workspace (and thus /home) might find a better place on the Velociraptor which is real fast. How should I partition the whole thing to get the most out of it. LVM might be an option, too. Maybe putting a third partition on the SSD for one VirtualBox image. Currently I am thinking:
SSD: 2GB /boot, remaining space for / Velociraptor: LVM spanning the whole drive. 150GB /home Remaining Space for /virtualMachines or something like that Samsung drives (LVM over both or one Volume Group for each? - Latter would be better in terms of data security, because if one drive in a big volume group fails everything is lost)
I recently installed Linux to run a few Linux based tools on a disk images I have, and I can't seem to copy the disk image over to my ext3 partition.
The particular distibution I'm using is BackTrack 4 r2, which is Ubuntu based. I can't seem to find specifically which version of Ubuntu is being used. The disk image is 108GB. It is currently located on a NTFS partition on a SATA hard drive connected directly to the computer. The ext3 partition is located on a second SATA hard drive connected to the same computer. It has 200GB total. I do not remember exactly how much free space it had but "df -h" showed a lot more than 108GB. The computer has 4GB of RAM and I gave it 8GB of swap space.
At this point it has been running for more than 12 hours. This is far longer than I would expect it to take had I been copying the file under Windows. How ever I do not have much experience with Linux, so if it's supose to take this long please let me know. I am planning on letting it run until I wake up tomorrow.
"cp -v" hasn't been very verbose at all. The only sign I have that indicates the computer is still trying to do something is the HDD light on my chasis that has stayed lit this whole time.
I'm trying to restore an image from a 40gb partition(6gb used) to a 100gb partition. I set everything up in gparted and and restored the partition image with clonezilla. In gparted, the partition shows the full 100gb partition with 6gb used, however when I boot windows and open the properties on the C: partition, it shows that it's only 40gb. Is there some setting to restore the partition image and use the full 100gb?
View 7 Replies View RelatedI have never used rsync before, only DD. But from what I have been reading, rsync is better becasue it will basically mirror your hard drive, thus being able to run the cloned software from the new hard drive. My problem is I do not know what is the best commands or even the basic commands to use in rsync. I am trying to make an image from a external hard drive to a usb drive. That way my chances of messing up he original software is not as risky becasue I'll just restore the image onto another hard drive. Does anyone know the best script to have rsync make an image file of a hard drive and place it on a usb drive and then restore it?
View 8 Replies View RelatedIn Ubuntu 10.04 running Gnome I can right click on any window and it gives me an option to show that window on all desktops, so even if I switch to a different virtual desktop, that window will always show.Is there a command in terminal that can do this?
View 1 Replies View RelatedHow Do I make a file a executable program ?
View 3 Replies View RelatedI know there is lots of documentation out there for installing tar balls but I can't make it work I am trying to work with this file sauerbraten_2009_05_04_trooper_edition_linux.tar.bz2 in file:///home/Nemesis/Downloads/sauerbraten_2009_05_04_trooper_edition_linux.tar.bz2
I am running Fedora 12, the gnome desktop if the desktop matters. I have been running Fedora almost elusively for 2 years and off n on before that but in my many attempts at trying to Install a TARBALL I have always failed hard.
Linux bash inline command to execute a program and limit the resource.As I know, to limit the resource I can use ulimit command.But, the problem is when I set the CPU time limit 1 second, and then I want to execute another program with CPU limit 2s, the ulimit command return an error like this: bash: ulimit: CPU time: cannot modify limit: Operation not permitted and absolutely my program killed in 1 second.So, How can I make the second program running with the CPU time limit 2 seconds?
View 3 Replies View RelatedI am looking for Backup Program to clone the partition of Ubuntu.
View 7 Replies View RelatedI have 3 partitions on my hdd right now, a Windows 7 one, the associated System Reserved and my Linux Mint partition. I was trying to use GParted to make another partition by splitting my Linux Mint one in two smaller partitions. I can't, however, unmount it, and so can't partitions it. I have considered partitioning it from Windows 7, but I'm afraid it will screw some things up and stop booting up correctly. So, what could be making the partition unable to unmount?
View 11 Replies View Relatedduring my fedora 12 installation, i made a swap partition by the wrong denotion "/swap".so when i had used the command "df -h",it showed the /swap entry in the list.so i deleted that particular partition using the "parted" utility. Now my doubt is, 1.where is that partition?(whether it has joined with other partition or still alive) 2.if it alives,is it possible to make it as a swap partition?
View 3 Replies View Relatedi have debian system in which i have mounted the OS on a ext-3 system . I have got a partition of 60 gb , which is formatted to ext-2 partition . Even if I mount , i cant write anything into it . How can i change that ? How can I make the disk writable?
View 2 Replies View RelatedI'm trying to install MS Windows from my Linux box. Because I have no CD drives nor USB ports, I can't use any live media to boot the computer and install Windows from the installation disk. So I've created a FAT partition and copy DOS files on that, so that I can boot this partition and install Windows from there. But the problem is I still haven't able to get it to boot.
Here's the output of fdisk -l code...
I created the partition by using cfdisk to format it as type 0B: WIN95 FAT32, and made dos filesystem on it using:
Code:
mkfs.msdos /dev/hda1
But when I reboot and select the DOS entry in GRUB, it tells me that:
"This is not a bootable disk. Please insert a bootable floppy and press any key to try again."
what I'm missing or doing wrong here? Do I need to change something on the MBR of hda1 etc...
how to make swap partition in rhce5. mention command step by step and how to change ext3 format to ext2.
View 1 Replies View Related