Red Hat :: Install RHEL4 From A Ghost Under Vmware
Apr 28, 2009
I would like to have your opinion on the problem : I created a ghost of my server RHEL4 with RAID 1 and 5, then I wanted to reinstall it on a virtual server under vmware.
So I restore the image on a virtual disk and qand I restart I still have this problem :
I started in linux rescue mode F5 I reinstall Grub on sda
I modified the modules.conf file to change the BusLogic SCSI, but this module is not in the kernel I used kudzu to reconfigure it doesn't works...
I have been using GHOST for quite a few years to back up my Windoze partitions from NTFS to a series of images on a fat32 partition. I usually boot off a DOS7 bootable CD and simply ghost over to the fat32 partition.
I am rebuilding my laptops and desktops to dual boot Windows7 and Suse 11.2
My goal is to create restore images from my NTFS and ext3 partitions into directories on the fat32 partition for a restoration to my "gold baseline" build after any corruption.
My partition layout is below. This is output from gdisk.exe in DOS7. It's an 80gig drive.
Is it possible to install Snow Leopard 10.6.6 VMware AMD edition (which I downloaded) on VMware linux? It is under Windows 7 so I just need to know if everything of VMware linux (like Hardware Virtualization) is the same under linux as for Windows.
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
Ive created a bootable RHEL4 USB flashdrive so that I can do my installs from rather than using CDDVD's. The USB key boots fine to the point where it asks me to select a drive that contains the ISO images, but it doesn't show me the USB drive to select, only my 2 hard drives sda1 and sdb.
We currently use HP xw9400's with the following spec as shown in dmidecode:
BIOS Information
System Information
I know that the xw9400's have the nvidia mcp55 pro chip on the motherboard that handles USB, keyboard, mouse and other peripheral traffic, so am wondering if this could be what the problem is? Like there may some code that i need to tell the machine to use this or something?
just one month before i upgraded my pc to Later configuration but then i can't install rhel4 on my pc. i have heard there is a few upgrades (Updates) will help this issue, is that true? then which update i need to use for install rhel4 successfully on my pc? or is there any third part utilities for solve this issue? here i am adding my pc's spec
AMD Athlon 2.6 Asus M2N68-AM 2 GB DDR II Nvidia 8400Graphics Samsung HDD
My X windows wasn't deployed in the installation at the beginning , but i need to install it now , my system is RHEL4 , i am not connected to the internet , so i will not be able to use up2date , so I need to use rpm instead.
I want to install the wireless lan driver in rhel4. I searched for the driver in internet, i got only Realtek rtl8185_linux_26.1031.1207.2009.release.tar.gz, how to install it in RHEL4.
I am using RHEL4.4 ES with mozilla firefox 1.5.0.3. I am unable to load flash player. The instruction says locate the installation directory of mozilla. That I am unable to find. There is no such directory as /usr/lib/mozilla<version no> in my system. But /usr/lib/firefox<version no> directory is present. I tried by copying the lib.so file in the plugin directory of firefox, but it is not working. Please can some body guide me which version of flash player I should install and hoe to install.
I have a RHEL4.8 machine, and I am trying to install the following libxml2-2.7.8 and libxslt-1.1.26 The OS installed versions are: libxml2-2.6.16-12.6 and libxslt-1.1.11-1.e14_7.2 I installed libxml2-2.7.8 and it appears to have installed successfully. However, when I attempt to build and install libxslt, it complains about some undefined references when linking to libxml2 which I believe are not in the old version (but do exist in the new one I installed). I am not able to erase the old versions and I am not able to update to the ones I want. I am at a dead-end at the moment and I am not sure how to proceed.
We have done an installation on a blade server (HP) for RHEL4.5.
The server have an HP smart array 2200 controller and during installation it can see the controller and disks just fine.
The installation completes up to the point where the system needs to reboot , however after the reboot it does not start up again and get stuck at the message: "Trying to boot from drive c:"
We used the rescue option to mount the installation and cant find nythign wrong, even with the grub setup (except that it points to hd96 as its primary disk). we tried changing this to hd0 as well but still no luck.
After about 3 installations we are still not having any luck.
I can't seem to get rid of this ghost window on my desktop. Whatever it is, it makes it unable to move the Desktop Folder around also. Easy fix I'm hoping?
We have a Fedora11 installation that we Ghosted (Norton Ghost) to a bigger Hard Disk because the old one was failing
I know there is an extra step for linux where you fix fstab because it points to all the wrong locations, could someone walk me through this or link me to somewhere that can walk me through it?
Do I need to do this editing from a Fedora 11 Live CD (as its gone missing) or will a Fedora 13 CD do the trick?
there i have a computer running ubuntu 9.10 set up as a server in my classroom. I have ftp http and an internal mail server set up on it as well as other settings. I really want to make a copy of the system so i have a back up of the os. i have figured out that i can attach a hdd to the computer and copy the os via the command line with an ubuntu live cd but this only works as long as the computer that is receiving the backup is exactly the same or the same computer. I would like to transfer the image to a portable hdd then install the os onto virtual box ( a virtual machine). Is there a way to do this without buying expensive software.dose ubuntu 9.10 have a product similar to Norton ghost.
I want to install debian on vmware workstation 7.1.4 but there's a problem! when I try to install vmware tools or open-vm, it can't complete compile modules of vmware. It is a big problem... It seem problem of kernel version after 2.6.37... But I can't find solution. logs.... Before you can compile modules, you need to have the following installed...
I have installed the latest version of Ubuntu Linux (11.04) into latest VMware workstation (7.1.4 build-385536). I have tried to install the VMware tools ISO that came with VMware workstation but It didn't work and the installation seemed real sloppy anyways.
I installed the open VMware tools from synaptic within the guest linux and restarted, everything seemed to have been installed just fine but VMware Workstation doesn't detect it. I'm not sure if the tools are outdated, silent errors happened, or if any manual post installation steps need to be taken.
getting any form of VMware tools to run in Linux and detected by VMware Workstation.
I completed the installation of VMWare Server 2.0.2 onto a CentOS 5.4 64-bit distribution. There is a VMware virtual machine file on the server in question, and I want to activate it through the application console.
I did not see anything readily apparent that would facilitate the importing of the virtual machine file. Does anyone have a procedure that can accomplish this task?
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
I'm trying to access the VMWare console from firefox using the VMWare plugin. The problem is that it doesn't work on Firefox version 3.6.8. So how can I access the console?
I am running an up to date Debian Lenny system with vmware 1.08 server installed.
When I run vmware, it appears to start normally. However, when I try to open a previously created image (from a different machine), everything is fine until I hit browse, which causes a screen to pop up that syas "The folder contents could not be displayed VFS error: Invlalid paramteres." and the following shows up on the command line:
I'm having a problem which seems restricted to Fedora. I'm trying to install Fedora 10 on a dual boot system. I have Windows 7 RC installed. When I boot the live CD to run Fedora, my screen ends up displaying Fedora on the left half, and bits of the Windows shut down screen on the right. I cannot access the Fedora menus, they are pushed off to the left out of view.
I previously experienced the same problem with an earlier version of Fedora, with the HD loaded with Ubuntu and Win 7 beta. Fedora would boot but display either the last Ubuntu or last Windows screen to the right, whichever had been running last. No other version of Linux exhibits this behavior that I have found, but my experience is limited. Is there a particular procedure that I need to run to get Fedora to use the entire video display? Does Fedora need to be installed first?
Hardware is: ASUS P5E VM HDMI, using the integrated graphics, display is a 32" LCD TV HDMI input, hard drive is a Samsung 500Gb.
I have a Norton Ghost .gho file, and basicly I want to extract the raw image out of this, for example to use with with tools like dd. (So using any symantec/windows tools is not an option). Is there any open source tool which can deal with these .gho files ?
(Note: the.gho file I'm using is a sector based one, and not a file-based one, which implies that things such as Ghost explorer won't work either (see this page)
