I have an image of the entire disk created using dd. The disk structure follows:
The image was created using:
How would I, if it is possible, mount /dev/sda1 from the image so that I'm able to read the contents?
It's not an option to clone the HDD again, I know how to do it if I had only cloned the single partition by itself. I hope it's still possible with the current image.
i need to mount at least for read access NTFS-based partition image on linux from a file. File is binary copy of a partition. Is there any libraries or resources for this?
View 1 Replies View RelatedI try to mount an image from a NTFS partition. Below is not working.
sudo mount /windows/D/img/XPLANE9.mdf /media/XPLANE9/ -t iso9660 -o ro,loop=/dev/loop0
when I tried to install Fedora on my pc, I got this error message " Defined Root partition not created a / boot/efi partition. I am trying to install it on a seperate hd. My main one has windows xp pro, but I do not want to interfer with that at all?.
View 14 Replies View RelatedI have created an image out of 2 other images using the "montage" command. I want to then print it using "lpr". I view the output from montage in XV and it looks fine however when I try to print, it prints the bottom half of the first image then the second and then the bottom half again.
E.g., imagine this:
Code:
<< end of top image
<< end of bottom image
The above is how it looks in xv however when printed, it looks like:
Code:
-------
-------
~~~~~~~~~~~~~~~~~~
~~~~~~~~~~~~~~~~~~
//////////////////
//////////////////
-------
-------
I really can't understand it, I've tried opening and saving the image again but it still prints as above. I don't know if montage is outputting it incorrectly or something, however it looks right on the screen!
I am trying to recover some important data from a 273 gig NTFS partition that was used in windows 7. The laptop was dropped and would not boot the next day. As an external drive I could see 2 smaller partitions (30 gig and 500 meg), but the main partition was RAW and requesting to be formatted... so I came to learn about Knoppix 6.2.1 as my live boot cd and ran ddrescue to recover an almost complete image of the bad partitionddrescue -n /dev/sdc1 /media/sda1/image.img /media/sda1/logfile.logI then ran it one more time:ddrescue -r 1 /dev/sdc1 /media/sda1/image.img /media/sda1/logfile.logthe image was made with 741 errors (amounting to 160 megabytes)So Now I have my partition as image.img which I want to mount.
First I tried
sudo mount -t ntfs -o loop /media/sda1/image.img /mnt/recovered
sudo mount -t ntfs -o loop,force /media/sda1/image.img /mnt/recovered
[code]....
I created a VM disk image with kvm-img, but I forget what was the max size of that disk image when I created it. Currently, its size is 6.2G, I want to install some large packages in that VM, so I want to make sure the disk image can expand to an adequate size.
View 1 Replies View RelatedIm a new user of Linux, for my present activity, I was able to create a new partition in my terminal using fdisk.So basically this is just an additional partition in my currently installed linux (ubuntu). Now my problm is, how can I use that partition or how can I save files or install applications on it? I tried creating a File system mkfs.ext3 /dev/sdb1, and I also mounted it,but when I copy files on the directory where I mounted it, it says "Permission Denied". I dont know if Im doing it correctly though
Thanks
How many default partition would be created, when Linux OS to be installed?
View 14 Replies View RelatedI have installed 1tb hard drive and would like to partition as follows:
1) / - 20g
2) /swap - 6G
3) /photos /150g
4) /videos /500g
5) /audio /300g
After 2-3 partition an extended partition automatically created in which I am not able to create specified capacity i.e., say I want 150g of /photos partition, the /videos partition is automatically reduced and a free space at the end appears. Some free space is always there which i am not able to understand. Nevertheless i clicked to create, but I get an error viz. 'device not created'.
I just maked an ext4 partition by the help of gparted. Ubuntu is my only OS no dual boot. Using Ubuntu Maverick. The problem is partition must be open as root to do any work else it wont even allow me to open file,create folder,cut copy paste or anything.
View 9 Replies View RelatedI am facing a serious problem.I installed UBUNTU 10.04 and encrypted it during installation. I accidentally erased some of the necessary files from root folder. now the the OS is NOT booting.luckily i still have the encryption key i have some important documents in that drive (desktop folder).
PS: I have tried to run Live Ubuntu it shows the Root, but it does not enter any of the folder.
I need to mount an ISO image on Linux. On Windows I use Daemon Tools, but how is this done on Red Hat Enterprise Linux 5.4?
View 1 Replies View RelatedI was given a forensic Image which I now know is a DD image of the drive (Vista) and am trying to mount the image or extract the image to another drive. I'm not sure of the extention type or if the image is a partition or the entire drive. I think it is the entire drive.
Is it possible to mount a DD image to a device. If I can't do that I just want to extract the files to run some programs against the drive. Can I view the files under Ubuntu or do I have to remove the drive and stick it into a Vista computer.
I purchased a second drive today and was hoping the command line would be something simple.
Or am I on the wrong track, should I be doing this all in a windows environment. The reason I picked ubuntu was because of the reporting tools.
I am using redhat linux4 and qt4.6. I have created an application in qt, which i want to link to frame buffer using C programme and display it onto the xserver or/and on the hawkboard.
View 1 Replies View RelatedI have problem to mount a compressed (ISZ) image under Linux, which was created by e.g. UltraISO? I am aware about user-space fuseiso, but it fails to mount these images, as I have reported in Debian bugtracker (correct me if I ddi something wrong). I ask the community for a help: I need a proved solution to mount these images without decompressing them.I believe that CONFIG_ZISOFS kernel option cannot help, as it refers a special RockRidge extension (per-file compression with mkisofs -z or mkzftree).
View 1 Replies View RelatedHow to create the FS image and mount the same ..?
I need to store some data in the image which I'll be creating ..?
I want to delete the KVM created hard disk image file, so I would like to know where it is located .
View 6 Replies View RelatedI have a large qcow2 formatted disk image, which I use as storage. Often I need to move data to and from this disk image. I mount the disk using the qemu-nbd tool as follows:
modprobe nbd max_part=63
qemu-nbd -c /dev/nbd0 /host/disk100G.img
mount /dev/nbd0p1 /home/rup/disk
But disk access fails every now and then in the midst of some I/O operation with an "Input/output error". At that point I have to manually unmount the disk and re-mount it so that I can run the program again:qemu-nbd -d /dev/nbd0umount joborkhaki/What could be the reason for this? Is there a better tool that I can use to maintain a qcow2 disk image?
Im trying to build an initrd image for my livecd using cpio -o -H newc, but the livecd can't boot. If I create the initrd image using mkfs.ext2 then it works.
View 2 Replies View RelatedI have a dd image of a full drive (as a file) that was using Truecrypt system encryption under windows. I want to mount the main partition from that image using Linux's Truecrypt. I am familiar with dd loopback devices and have the partition offset, but I don't know how I can mount it like this because I need to use the truecrypt command.
Is there perhaps some way to create a fake device file for the disk image that I can mount from within Truecrypt?
I made a disk image of a vfat fat16 using:
Code:
dd if=/dev/sda of=image_drive.img
I would like to mount it to /mnt/vfat using mount and loop. Is it possible to be mounted?
I am having a rather strange issue. I have windows 98 installed into a disk image that I use bochs to boot it with. I want to transfer some files to the image but now I am unable to mount it. I will attach the drive to the loopback device but when I go to mount I get wrong fs type bad option ... etc.
The command I used to mount was
Code:
#mount -t vfat /dev/loop0 /media/loopdisk
cfdisk shows it ok as does fdisk. shows as a fat16 file system. When I attempt to check it for errors using fsck.msdos I get
Code:
# dosfsck 3.0.6 04 Oct 2009, FAT32, LFN
# Logical sector size (64543) is not a multiple of the physical sector size.
When I boot into windows 98 in bochs and check the disk it tells me there is no problems.
which default file system will be created on usb stick using live-helper usb-hdd image?
View 1 Replies View RelatedIn light of my previous achievement in wireless networking, I've decided to create a larger issue for myself to solve. Which hopefully I can get some help with. Because my system is totally kisspoped up, for those of you who get what that means. I was trying to install GRUB via the .txz package and it created a mirrored image of the /boot folder. Which for some reason contained the / folder. Which in turn held /boot and all the other folders / is expected to contain.
Now, trying to remove the extra /boot folder proved difficult, but once I finally was able to figure it out, I remembered I could removepkg and that would probably mend the situation. However, I was already 20-something percent through moving the files to trash. Now when I checked /, /boot was gone from there. Along with various other folders. SO! Apparently the /tmp/boot folder created was in reality the /boot folder, albeit in the wrong place and having the wrong contents. Somehow, one folder existed as two different versions of itself at the same point in time. Much as a Time Lord might. Deleting one made the other vanish with it.
Good news:I removed it via Thunar and it should be in the root user's trash /home and some other folders had yet to be trashed when I hit cancel, so I can still use some things Bad news:I never ran X as root, so I don't know if it HAS a trash folder I can only use things already started up because the binaries are gone, but the configuration files in /home are still there (although /usr/bin remains)
Ideally, there would be a big UNDO button somewhere in this long row of function keys. Reasonably, there should be some kind of restoration tool. Realistically, I think I'm going to have to reinstall the system, which wasn't easy in the first place due to my faulty disc bay which detects discs at will.
i have read how mount floppy image (*.img) but how edit by adding files?
View 4 Replies View RelatedWhat is good program and that is easy to use to make a image of a linux partition
View 3 Replies View RelatedI downloaded an raw SD card image that has two partitions. It caused some file system errors when I tried to dd it directly into an SD card. I am not sure if the card is defective or the image. Is there a way to examine this image without writing it to a physical card? Like trying to mount the partitions separately or checking the tables?
View 2 Replies View RelatedYesterday I got my new workstation featuring:
120 GB - OCZ Vertex3 MAX IOPS
300 GB - Western Digital Velociraptor (10k RPM, about 4ms avg. seek)
2x2TB Samsung Ecogreen F4
The system will be running Ubuntu with the main purpose of doing lots of Java development. Occasionally I have to develop Java in a Windows VM; for this I need fast VMs. I read a lot about SSD wear and maybe it is a bad idea to put the Eclipse workspace on the SSD, because of all the little writes the builds do. Perhaps the workspace (and thus /home) might find a better place on the Velociraptor which is real fast. How should I partition the whole thing to get the most out of it. LVM might be an option, too. Maybe putting a third partition on the SSD for one VirtualBox image. Currently I am thinking:
SSD: 2GB /boot, remaining space for / Velociraptor: LVM spanning the whole drive. 150GB /home Remaining Space for /virtualMachines or something like that Samsung drives (LVM over both or one Volume Group for each? - Latter would be better in terms of data security, because if one drive in a big volume group fails everything is lost)
I recently installed Linux to run a few Linux based tools on a disk images I have, and I can't seem to copy the disk image over to my ext3 partition.
The particular distibution I'm using is BackTrack 4 r2, which is Ubuntu based. I can't seem to find specifically which version of Ubuntu is being used. The disk image is 108GB. It is currently located on a NTFS partition on a SATA hard drive connected directly to the computer. The ext3 partition is located on a second SATA hard drive connected to the same computer. It has 200GB total. I do not remember exactly how much free space it had but "df -h" showed a lot more than 108GB. The computer has 4GB of RAM and I gave it 8GB of swap space.
At this point it has been running for more than 12 hours. This is far longer than I would expect it to take had I been copying the file under Windows. How ever I do not have much experience with Linux, so if it's supose to take this long please let me know. I am planning on letting it run until I wake up tomorrow.
"cp -v" hasn't been very verbose at all. The only sign I have that indicates the computer is still trying to do something is the HDD light on my chasis that has stayed lit this whole time.