Software :: Texmaker Doesn't Show As Many Tools?
Jan 26, 2010'm trying to write pdfs with ubuntu.So I installed these packages :
texlive-latex-base
texlive-latex-base-doc
texlive-latex-extra
[code]....
'm trying to write pdfs with ubuntu.So I installed these packages :
texlive-latex-base
texlive-latex-base-doc
texlive-latex-extra
[code]....
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
I need to monitorize which Wi-Fi APs are in coverage, so periodically I perform a scan whith "sudo iwlist ath0 scan". The problem appears when disconnecting an AP (from the electrical network). In this case, iwconfig shows the disconnected AP during 30-40 seconds after the disconnection.
I'm trying to figure out how to order the kernel to actually refresh the list of in coverage APs, and avoid to show nets that were in coverage but aren't now.
i installed debian cd 1 on a school's computer however, some administration tools are missing (like add/remove programs...) , i tried to install the full gnome but the installation doesn't start
Pmaison:/home/pmaison# aptitude install gnome Lecture des listes de paquets... Fait Construction de l'arbre des dİpendances Lecture des informations d'tat... Fait Lecture de l'information d'İtat İtendu nitialisation de l'tat des paquets... Fait Lecture des descriptions de tches... Fait Pas de version candidate trouve pour gnome....
I have run my files on windows using latex and winedit as editor and miktex as compiler.
When I installed Texmaker in ubuntu 10.10 I was not able to run those file that have already been run in windows. Is there any configuration that should I do to make these files compatible for texmaker? or what should I do? By the way, I am not preferring to change from texmaker, but if there is any similar editor better than that , please let me know. What is the compiler that is working in Texmaker, and is it true that it is being installed with Ubuntu its self.
I don't know why this happen. In Slackware 13 it worked fine.
This is the output:
Code:
QGtkStyle was unable to detect the current GTK+ theme.
(process:4870): GLib-GObject-CRITICAL **: gtype.c:2458: initialization assertion failed, use IA__g_type_init() prior to this function
(process:4870): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed
[Code]....
I have installed both TexLive and Texmaker (using the package manager). Now I am trying to set up Texmaker to use TexLive for compiling. Everything I can find online suggests that the files should be located in a location such as this:
Code:
/usr/local/texlive/2005/bin/i386-linux
However, for me the "texlive" folder does not exist within "/usr/local". Where else might the necessary files be located?
Also, running
Code:
tex -version
suggests that TexLive 2009 is installed correctly.
When writing a script using command-line tools why is it more difficult using graphical tools?
View 3 Replies View RelatedI checked xen-tools on a Debian Lenny system
Got following
Code:
This package contains tools to manage Debian based XEN virtual servers.
Using the scripts you can easily create fully configured Xen guest domains (domU) which can be listed, updated, or copied easily.
Homepage: [url] in the above output I am getting a line Conffiles and then you can see a series of /etc what are that and is it an error or some conflict?
I need to install the scripts of angstrom distribution
ie ARM gcc..................how to install the scrpits from the site [url]
I'm using a 64-bit release. But, my PC doesn't seem to show the full 4GB of RAM that is installed. It shows about 3.4 to 3.6GB of RAM (please see attached picture).I thought that if I could install a 64-bit OS that would mean that I have a 64-bit capable processor. I thought using a 64-bit release would show all 4GB or RAM on my PC. What am I doing wrong? My CPU is a Pentium 4 Prescott DT 630.
More information on my system is below:
Code:
$ lsb_release -rd
Description:Debian GNU/Linux 6.0.1 (squeeze)
Release:6.0.1
[code]....
So, now that I got http://bit.ly/h70Nnf sorted out, how come doesn't my Mobloquer show anything in the log. I'm used to Peer Guardian 2 in Windows and I know it has to show some more stuff than nothing.. Your help is sincerely appreciated cuz I'm so new to Ubuntu. FYI: Mobloquer and Peer Guardian 2 are IP blocking programs.
View 2 Replies View RelatedI an trying to install ubuntu onto my old Windows XP computer, I have burned the **** with the ISO files on it with a Mac and also tried using Windows 7, they have the files when I load them on those, but when I go to put the disk in my Windows XP computer it say's the disk is blank. I reboot my computer, and it doesn't try to install anything.
View 9 Replies View RelatedI reinstalled Debian today, and changed partition tables. Now I have 4 partitions, 3 of which are encrypted, including / (root). Everything was fine at first, but now, instead of the partition label I've chosen, I see this: 120 GB Unrecognized Everything works fine, I just don't understand what this is all about.
EDIT 1:I don't understand something else too, which might be related. First time, I didn't need to enter root password for things like Synaptic and so, is this somehow related? (Now I'm being asked for, like normal way)
EDIT 2: I know the label is ROOT, I used e2label. But it still doesn't show the right name...
Fedora 13...using yumex I installed everything for eclipse/CDT C/C++.
However when creating a new project, no option fpr C++ is shown.
Obviously Eclipse doesn't know CDT exists!
I want to eventually add Qt 4.6.2
Here is what I have:
I have a Sansa Clip + ,it works just fine in MSC mode. I wanted to give a try to the MTP mode. But it does not show up in Amarok. I have libmtp installed and mtp-detect does show up the device information.
View 6 Replies View RelatedI just upgraded to F15 from 14 and F15 doesn't show up in GRUB only 2 kernels of F14. I can't obviously boot into either one, so now I am stuck with nothing.
View 4 Replies View RelatedI've just installed 11.3 on my mother's laptop. I downloaded and installed Swiftfox, but there's no evidence of it in the menu. I can double-click the Swiftfox.desktop icon in /usr/share/applications, and Swiftfox runs properly. However, it's not listed in the KDE menu.Is there a way to manually update the menu?I didn't have this problem with the previous version of openSuse on this computer. But I did a fresh install, rather than update to 11.3.
View 3 Replies View Relatedmy cpu usage goes way up. Top doesn't show anything using the cpu to any great extent. I did a "ps -ax" and statred doing process kills. I kiilled a dbus pre-fork first, which brought, which stopped the cpu hogging. This is the process line:
/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
Does anyone know what that does, or what I killed?
I use gtranslator to translate po files. Gtranslator worked fine on 11.3 but when I installed 11.4 it crashed. I opened a Bug report here. Although I followed instructions, I couldn't solve it. Now I use Gnome 3. I installed gtranslator from the page where it says about Gnome 3. Now my gtranslator is 2.90. Now when I open a file, it returns the following image The numbers you see below are the words. I don't see a thing. I can move to next word but I still cannot see anything.
View 1 Replies View RelatedI'm running ubuntu 9.10 64 bit on a Dell Latitude E6400 with the following configuration:
Intel(R) Core(TM)2 Duo CPU P8700 @ 2.53GHz, 3MB L2 Cache 1066 MHz
Intel Graphics Media Accelerator x4500HD
4GB RAM
250 GB Hard Drive SATA 7200RPM
I'm experiencing overheating problems, after just 15-20 minutes of minimal use (surfing the internet, not even watching flash vids or any other vids). The same laptop under Windows 7 64 bit stayed really cool.
I've read several posts here and followed this manual: [URL] to try to control the fans (I only installed the lm-sensors and ran the sensors command, I didn't do anything beyond that). Specifically what I did was install lm-sensors (via apt-get), ran sensors-detect which advised me to add the coretemp module to /etc/modules, which I did.
However when running sensors the only information I get is the overall temperature and the temperature of each of the cores.
why I'm not getting fan speed info when running sensors? Also is there a way to find out if more modules needs to be added to /etc/modules?
i upgraded to 10.04.tty1 comes up on a black page and password will not enter.Tried esc on boot and none of that works.It shows 9.10 installed no 10.04.I need a way on
View 2 Replies View Relatedwhen I am having a conversation in empathy, I find that some messages people have sent me, don't arrive. Also the other way around: people don't receive messages I have sent them. I use ubuntu 10.04 now, but this also occurred to me in 9.10.
View 3 Replies View Relatedwhy the bootloader won't show up when I turn on the PC. The only things that come up with search results are 'Why ubuntu isn't on the boatloader' but my problem is is that the boot loader doesn't even SHOW UP.
Installation went completely fine, downloaded a version 10 32-bit iso file and then put in the folder with wibu and it asked me to restart. Restarted the PC, nothing came up so I thought you might have to restart again, restarted again, still no bootloader.
After looking in the 'Add/Remove Programs' of Windows it does say it's installed, so why the bootloader isn't showing up is rather mindbobbling.
I have a new netbook - "Eee PC 1005PE-PU27-BK" and installed Ubuntu Netbook Remix 10.04, Kernel Linux 2.6.32-24-generic. I love Ubuntu, but I also want to be able to access Windows 7 if I can. I've read some on GRUB, but the menu on startup isn't showing my Windows 7 instance. I've tried reinstalling GRUB, but when I run sudo update-grub, I still get this:
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.32-24-generic
Found initrd image: /boot/initrd.img-2.6.32-24-generic
Found linux image: /boot/vmlinuz-2.6.32-21-generic
Found initrd image: /boot/initrd.img-2.6.32-21-generic
Found memtest86+ image: /boot/memtest86+.bin
done
I know that Windows 7 is still on the system, I just can't access it.
I'm facing a boring problem and I cant understand why it is happening. Im running Evolution 2.28.3 on Ubuntu 10.04, and all the messages are not showing their images. I already did the following confs:
1) Change proxy to connect "Directly to the internet"
2)In Preferences, "Load images from contacts".
3)I tried the option "Load Images" ou CTRL+I.
I have an ASUS M4A785-m and it has the Realtek 8112L gigabit nic. The weird thing is, the 10.10 rc saw the nic card just fine, and windows sees the card so it's not disabled in the bios.
Ubuntu says i have no network connections and i need to get internet. Any suggestions?
I should also note that i'm running from the livecd and lspci shows that it detects my NIC. but my NIC isn't "detected" in that it can be used.
I've just upgraded to Maverick and as the Me menu works with Empathy I started to use it as my default IM client.
But no matter what I do, it won't show my picture.
I tried resizing the picture to 96x96, I tried to convert it from jpg to png. I tried uninstalling the program with apt-get remove --purge. I tried also removing the ~/config/Empathy directory and all others related to the program and then reinstalling it but nothing seems to work.
I even made a video aboout it, maybe I'm doing something wrong: [URL]
Nautlius doesn't show all the files that are in a folder From the screenshots below you can see that there are more files in the folder (ls from the terminal shows them all), however nautilus doesn't. Other .mkv files show up in other folders so its not that
I've tired turning off previews and that didn't work. Running nautilus as root didn't work either
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)