how to include my command results in a script? Basically what the script does is it checks the status of a service within the linux server, then sends an email when done. I want to include the results of my status check to my mail when sent.
i.e.
service dhcp3-server status Status of DHCP server: dhcpd3 is running. <---this I want to include in the mail that is sent out via script.
I'm timing how long it takes to run a command foo. I'm looking to append the results from the time command to a file, and discard the results from the foo command. I tried the following, but it didn't do what I want:
$ time ./foo > /dev/null >> output_from_time_command.txt
trying to see IF i dont get the right results repeat the command until it will or quit after 3 tries....
expect -exact "->"
send -- "test_read_register 0,0x37
"
if {! [regexp {Address 0x00000000} do send -- "test_read_register 0,0x37
[code]....
It should read
Read: Address 0x00000037, Data: 0x0000000b
but sometimes it comes out to this
Read: Address 0x00000000, Data: 0x00000000
therefore ill have to run the command again IF I Dont get the right results...
I am using Ubuntu 9.10 and when I tried to send mail from the command line I get: /usr/lib/sendmail: Permission denied. any takers on this.
View 6 Replies View RelatedSend an E-mail to your local account. Try two different ways to send and read it. How can you check that it really arrived? I decided to try using the 'mail' and 'pine' commands. So:
1) Using the root account, intending to send an e-mail to myself (root):
Code:
# mail -s "Hello root!" root
Simple form of sending e-mails internally.
^D (this keystroke is to finish the e-mail)
EOT
2) Using 'pine', another e-mail client: The mail is composed correctly, with 'To:' field set to:
Quote:
[URL]
which is my hostname, as my box runs in a VMWare Slack 12.2 image. In both cases, nothing was received in my mailbox (by typing #mail)... Additionally I don't see any new e-mails when I look at the file '/var/spool/mail/root'. Do I need extra information configuring my mail client/server/service?
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies View RelatedI'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
How can I send gpg encrypted mail automatically from the linux command line?
I'm a little stumped on this one, I've tried using mutt but it doesn't encrypt mail unless it's used interactively.
Does anyone know if you can use the build in mail command to do this some how?
How can i make a script to send the output of top command in mail.
i have to mail the output to another person , tell me how can i do this
I'm trying to send the results of a command line $du --max-depth=1 to a zenity message box.I want to create a .sh script that I can run as a Nautilus script that will open a zenity message box with a listing of sub-folders/sizes. $DU with options, will provide the results in a terminal window, but I can't seem to get it into a zenity message box. I've tried gxmessage also, but no go.
View 2 Replies View RelatedI am trying to send e-mail from command line by using "mail" in fedora. It goes to e-mail server in the same network but it is refused by other outside this network with message: "..... Connection refused by name@yahoo.com ......
View 1 Replies View RelatedI ran this command from terminal.
Code: Select allmail -s "Test Subject" example@yahoo.com < /dev/null
Got error on command line:
Code: Select allsend-mail: Authorization failed (534 5.7.14 https://support.google.com/mail/answer/78754 ng13sm2265977pdb.82 - gsmtp)
ssmtp configuration file:
Code: Select allroot=ssmtpmailtesting@gmail.com
mailhub=smtp.gmail.com:587
#rewriteDomain=
hostname=mybox
UseSTARTTLS=YES
AuthUser=ssmtpmailtesting@gmail.com
AuthPass=[mypassword]
FromLineOverride=YES
I want to send a simple mail from my terminal
I'm using opensuse and a Know that I have postfix installed...
I don't know what I need configure first...
I know that I need a SMTP server to send e-mails write?
When I try send e-mail with the command mail I received this message :
Code:
mail -s "meeting reminder" -c professorgenival@hotmail.com micromerces@gmail.com
mailq:
Code:
(host mx4.hotmail.com [65.55.92.168] refuse to talk to me: 421 cannot conect to SMTP server.
I was reading about fetchmail But I can't understand....
I have sendmail setup on my server but for some reason the following command does not send me an email: echo "test" | mail -s testsubject xyz@gmail.com
however in my crontab i have MAILTO="anemail@anemail.com" and it that is pumping out emails.
I am running this on an AmazonEC2 machine running Fedora Core 8.
Is there an easy to use program that I can use to send mail from the command line? I want to be able to create a batch script to send mail from different text files. What I'm looking for is something like:
mailapp mailserveraddress destinationmailaddress mymailaddress filetosend
I have got a nagios server running on my network, The configuration seems to be okay but each time there is a service alert notification, and an e-mail is sent to the contact group, Nagios continuously sends e-mail over and over again. Do anyone know of a way to set Nagios directives to only send one e-mail per alert without it flooding mail boxes.
View 3 Replies View RelatedI had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedHow to configure a Debian mail server as a user send a mail with attachment maximum wight is 5 Mb.
View 3 Replies View RelatedI'm running a desktop-less version of Debian via Sun VirtualBox. The reason I'm doing this is because I don't have enough graphics or RAM power to have a desktop environment running on top of my current desktop; also, I want to learn Linux through the command prompt. I'm running the AMD64 version of Debian; I'm not sure if that's relevant.
My main goal is to be able to email useful files from the virtual Debian to my main computer, so that I can save them for later if I ever decide to do a "real" installation of Debian on this computer. I realize now that there's probably some "easy" way to do this by reading the virtual machine's hard drive, but at this point, my curiosity wants to see this issue resolved. I started off wanting to find a command-line program to send my email with, and one was built-in. The syntax ~$ sudo mail -s "Subject" email@yahoo.com "This is a test email."
C^D
Cc:C^D ~$
is what I found. I tried it, and (unsurprisingly), it failed. I then learned that the mail command calls exim4, or something along those lines, so I needed to configure exim4. Soon thereafter, I learned that Yahoo's SMTP wasn't public, but Google's was. So, I found this web page which described how to configure exim4 to allow for email to be sent to a Gmail account. I made one, and followed the page word-for-word.
I sudo-mailled a test email to my Gmail account, and nothing happened. I waited a bit longer, and still, nothing happened. Finally, I started looking around, and found out about the exim4 logs in /var/log/exim4. In my mainlog, I think that it's telling me that Google denied my connection: <date><time><random numbers and letters> == **********.gmail.com R=send_via_gmail t=gmail_smtp defer (111): Connection refused
So, now, I'm just stuck. I don't know what I did wrong, I checked my exim4.conf.template twice for spelling errors, but I don't think I made any. At this point, I can only hope that someone else has had a similar problem, or knows what I'm doing wrong (or haven't done yet).
I have configured fetchmail, sendmail/postfix and mutt to act as a relay to receive mail. I can receive mail fine but I cannot send mail. Its working fine on my one box but on the one acting as a nat I am having issues. This is my mail log from the nat box.
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4382]: p1P8gPfd004382: from=root, size=52, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, relay=root@localhost
Feb 25 03:42:25 TrunkmonkeyNat sendmail[4383]: p1P8gPgn004383: from=<root@localhost.localdomain>, size=353, class=0, nrcpts=1, msgid=<201102250842.p1P8gPfd004382@localhost.localdomain>, proto=ESMTP, daemon=MTA, relay=localhost [127.0.0.1]
[Code]....
I have a script that uses cp to copy data from A to B. There are some troublesome files that are constantly in use and read "Permission denied" or "Text file busy" but I'm not worried about these. Therefore my copy process always contains output.The script runs through cron and the output (automatically) goes to /var/mail/user. I tried setting it up to send me an email and it comes through, but it's completely blank. The email in /var/mail/ contains the full output.
Here is my command:
0 18 * * * /home/backup.sh | mail -s "Backup completed" jsteel@...com
(The script simply contains many "cp -r /mnt/location/a /mnt/location/b")
[code]....
I'm having a problem with my mail. When I send mail, it takes a long time for the send to complete.In the below, datestamp is just a simple script to put in a no-white-space date/time stamp.
Code:
$ datestamp ; mail woodnt; datestamp
02-05-10@193844
[code]....
I'm running Ubuntu 11.4. I've played with different versions of Picasa, installing the Linux version via Ubuntu Software Center and also using Wine. At a certain point I had several versions of the application installed and things were getting. When I search for Picasa in the Unity application search field (clicking the button with the dot in the centre at the top left of my screen) I got several results for Picasa, some of which when clicked would start Picasa and some which wouldn't. When I remove all versions of Picasa both from Wine and native I still get some results for Picasa which don't start Picasa when clicked.
View 2 Replies View RelatedCan anyone tell me what the pros and cons are between heirloom-mailx vs mailutils? This is for ubuntu 10.04 LTS. AT this point my only purpose is to use the mail command line program to occasionally send log output to email aliases.
View 2 Replies View Relatedin the middle of script, i need to send the output of (send command on line 8) to a file
#!/usr/bin/expect
spawn telnet 172.20.64.133
expect "ENTER USERNAM <"
[cod]....
i treid the below on line 8 :
1- send "show command;
" > logfile.txt : gives an error extra character after the "
2- logsave logfile.txt 'send "show command;
" ': error invalid command
3- i simply tried to send the output of the whole script to file logsave /home/logfile ./script : seems that logsave work under root only
4- ./script > logfile : the problem with this is that the output of echo or (read "enter your id") command will not be displayed on the screen (actually nothing will be displayed, i have to open the log file to see the output). is there any way to save the log of the "send" ? or to save the log of the complete script without hiding the output on the screen?
I m not able to configure sntp server at my linux distribution.
Here are the details. Defined the mail server here.
Code:
/etc/mail/sendmail.mc
dnl define(`SMART_HOST', `XXX.XX.XX.XXX')dnl
ran this command.
[Code]...
I normally use the "locate" command to find files that I have on my local drive. However, if I wanted to do this for an external drive, how would I go about this?
From what little I know about Linux, I'm guessing that it creates a reference file from which it performs the search when the command is typed. If I'm right this is updated at a given interval or when "updatedb" is used?
As the external hard drive is not always mounted is it best to create another of these reference files and have a different command (e.g. locateext) or something? Or is it best to add the external hard drive's location to the list of files that get added with updatedb.
I'm running Fedora 11.
I use gmail for all of my emailing needs but stumbled upon linux counter at counter.li.org. Now I registered on the site and downloaded the machine-update script from the site. So I ran it and it collected the required data. But when I run ./machine-update -m as they have told, I guess no mail gets sent as I have to configure the mail program. How do I configure it so that it sends mail from my gmail address using stmp?
View 1 Replies View Relatedso I'm really new to using Linux, and I searched the forums, but most people seem to have trouble sending mail, not receiving it. When I send mail from the CLI, it gets delivered fine (from travis@travishoward.net) But when I try to reply or mail to the server, I get this message back:
Code:
----- The following addresses had permanent fatal errors ----- <travis@travishoward.net>
(reason: 554 5.7.1 <travis@travishoward.net>: Relay access denied)
[code]...
Am trying to configure the default sendmail program to send mail from command line but failed. Here are the steps I did while following [URL]
cd /etc/mail
mkdir auth
chmod 700 auth
cd authCreate a file called client-info with the following:
AuthInfo:smtp.spamarrest.com "U:<spamarrest.com's login>" "I:<spamarrest.com's login>" "P:<spamarrest.com's password>"makemap hash client-info < client-info
[Code]....