Software :: Mobile Samsung GT 7722 - Need KIES Software Under 10.10
Jun 23, 2011I have mobile Samsung GT 7722, and I need KIES software under ubuntu 10.10 if possible and how can I install it
View 1 RepliesI have mobile Samsung GT 7722, and I need KIES software under ubuntu 10.10 if possible and how can I install it
View 1 Replieshow can i make my samsung e1410 mobile compatible with mobile internet in Ue 2.9
View 1 Replies View Relatedi am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies View RelatedWindows and Samsung PC studio Software I used to surf internet in my Laptop(Windows Xp) using Samsung PC studio software with the help of my Mobile Phone.When i am in Linux without Samsung PC studio Software.I am using Ubuntu 9.1 and trying to connect internet through Samsung Mobile Phone C6112.When i connect this mobile Phone to the Ubuntu through Cable wire, The Ubuntu recognized its a Samsung Usb Modem.I tried using Mobile BroadBand Connection Settings in Ubuntu.its not helping.Solutions which are useless
1.People says that Wine cannot be used to execute the Windows Version Samsung PC studio Software Because the Wine Cannot recognize the USB activities.
I've got Ubuntu 9.04 Jaunty Jackalope. How may I install and configure a DLNA server on this laptop to share music, photos, and videos, with my Samsung Wave S8500 mobile
View 5 Replies View RelatedI have just purchased a Samsung Nexsus S mobile phone. I am trying to download music onto it through my laptop using Ubuntu 11.04. I cannot seem to get anywhere. I have tried the Nexsus S forums but they tell me to ask here as they are not converse with the Ubuntu software.
View 4 Replies View RelatedI am using ubuntu 8.04
here is what i did
I ran
ffmpeg -i /sumeet/clip/friends introduction song.mp4 -s 160x120 -acodec amr_nb -vcodec mpeg4 -r 30 -ar 8000 -ac 1 ~/Desktop/friends.mp4
now I compared sample video created by mobile file I created above.code...
I am trying to connect my samsung sch-u640 mobile phone to my laptop to transfer some music to it, but I always get "connect failed".
View 1 Replies View RelatedI just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
View 1 Replies View RelatedI like ubuntu alright, but prefer Debian overall. Before I reinstall Debian I was wondering if during the install if the latest release would automatically recognize the Samsung ML 1665 as the latest ubuntu release did. If not, how does one get the printer installed.
View 3 Replies View RelatedOn Printer installation, the ML-1740 printer is recognized, and the driver for the ML 1750 is recommended. When either test page or other page is printed, job shows in queue, then shows as completed, never gets printed. Cables look fine, Printer worked fine with F11.
View 8 Replies View RelatedI've up until recently been using Mint on my n210, but as I really liked the look of openSUSE (Gnome) I have changed to 11.3. So far I love the distro, but I am having a little issue - some fn key combinations aren't working (brightness in particular). When in Mint I was able to install a couple of programs made by Voria (from Linux On My Samsung), is there such a program for openSUSE?
View 3 Replies View RelatedI've just gotmy new phone a SamsungGT-S5230! My problem is:I can't transfer any file from my ubuntu desktop over to my phone. On the CD it came with there is only a windows software called "PC Studio" and Windows drivers. As I plug in the phone via USB to the PC it offers 3 options: PC Studio, Media Storage, Background Storage. If I pick one of the first 2 options my phone says it is connected, and charges via USB. The third option says "Please Insert a MicroSD card". (I don't have such at home). Ubuntu can't see my phone, none of the options seem to work. Maybe I should buy a MicroSD card? Or is there a workaround for the windows software to run ubder Linux? I tried to install t with WINE, but it froze during the installation.
View 4 Replies View RelatedI am trying to install Ubuntu 9.10 on a Samsung Q1 Tablet PC but it reaches a point when the screen becomes smokey and then after a few seconds gets black, forcing me to abort.
View 3 Replies View RelatedI have just purchased the Samsung N150 net-book. The reason for purchasing was so I could watch movies, listen to music and browse on the go. It came with windows 7 starter and a load of pre installed Samsung crap. I was wondering whether Ubuntu would be a better choice for me since I only really want, Chrome, VLC, Spotify, MSN and Dev++ compiler.
I am very computer literate doing programming at Uni, but have not used Linux before. Also there's loads of Samsung software for extending battery life or something. Will I be able to install that on Ubuntu or not?
Tried installing all the Samsung ML-**** from the list. PS Getting really tired of booting XP every time I want to print something.
View 3 Replies View RelatedI bought a new printer from SAMSUNG ML2245 Model. In my system (fedora12), I could not print anything. Then I found that this model samsung ML2245 does not exist in the list box. And I tried to use generic printer, that is also failed. How to install the driver for this model?
View 1 Replies View RelatedHow can use my printer in my linux? My printer is samsung clp-510.
View 3 Replies View RelatedI have a 650Gb HDD usb drive that I wish to use with ubuntu 10.04LTS aswell as on a WINXP system. HDD is clean. My ubuntu system has a /home partition formatted to EXT3, but as I use IFDRIVE to read this partition from windows, it needs to be set to have inode of 128 eg (mkfs.ext3 /dev/sdb1 -i 128)
my way of thinking is I need to partition the drive, format the drive to EXT3 making sure that is set inode to 128 How do is the best way to do this?
Then I need to get ubuntu to talk to this drive when I plug it in How do I do this?
How do I install my Samsung SCX-4623FW/XAA multipurpose B&W Laser printer in Ubuntu Linux via USB cord on my 5-6 year old Dell desktop?
I have downloaded three files from Samsung.
/home/chuck/Downloads/UnifiedLinuxDriver_0.95.tar.gz
/home/chuck/Downloads/Smartpanel_0.95.tar.gz
/home/chuck/Downloads/PSU_0.95.tar.gz
I had an ubuntu 11.10 installation that was no longer supported and was low on disk space, so I bought a new disk and installed debian wheezy on it and made it the boot disk.
The machine had/has a samsung e2020 monitor, and ubuntu and the new debian install both recognized it as 1600x900 resolution. I ran the proprietary nvidia driver with ubuntu but did nothing at all with the debian ... it just worked.
The power supply on the machine conked out and I took it ro be replaced and dug out an old, old machine to use while the newer one was gone. Debian would not install on it. But ubuntu 11.10 did, but displayed at 1024x768 on the samsung which it recognized as a 'VGA'. It was slow, but it worked. When the newer machine came back I reinstalled it ... but its debian 7.6, which used to know the samsung at 1600x900 resolution, now runs it at 1024x768, just as the old box had!
It must be some change made to some firmware in the samsung itself? It's not very pleasant.
I've tried to install the nvidia driver , but no luck there. I see now that debian uses something called 'nouveau' to run the proprietary nvidia chip, and I'm all for that ... but it used to be able to run it at 1600x900 and now it's forgotten how.
Here they are ...
Code: Select alljfl@wsdeb:~$ xrandr
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 4096 x 4096
VGA-1 connected 1024x768+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
1024x768 60.0*
800x600 60.3 56.2
848x480 60.0
640x480 59.9
[Code] ....
So I've gotten lucky, haven't I? I don't know if the display will still be ok when I restart ... so I'll save a copy of the above and try to script it, if I must, on reboot/relogin.
I just bought a Samsung 850 Pro 250GB SSD drive and have since then found out that Linux has/had a faulty implementation of queued trim (which is a synonym for NCQ I think). I'm using kernel 4.1.0 (the default selected by the Debian 8.1 installer) and I've read that Samsung drives are blacklisted for queued trim by the recent kernels. However, the output of dmesg contains the following lines, with and without TRIM enabled for the drive (i.e. with or without the "discard" option in fstab for the drive):
Code: Select all[ 1.012287] ata6.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.013438] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
[ 1.013440] ata5.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 1.015037] ata5.00: failed to get NCQ Send/Recv Log Emask 0x1
Since the depth is not 1 but rather 31, it looks like NCQ is enabled. I've disabled TRIM on the drive for now, and whether it's safe to enable TRIM or not.
I have a Samsung ML 2510 USB connected to an F13 based system. The printer is registered as the default printer. A test print gives the printer what I call a wake up call and then never prints. Win XP dual boot prints fine.
View 2 Replies View RelatedI have F15 fresh install on Samsung Q45. The brightness function key is recognized but doesn't really increase or decrease brightness. It is set to maximum.There was a workaround in F14 for same problem.
View 1 Replies View RelatedI want to add a Samsung ML-1911 printer to my desktop I have down loaded the unified linux driver from samsung site. It says 'server of cups printing system is not accessible at the moment' and does not show a printer.
[Code]...
It looks as if I'll get a deal I can't turn down and sell my old original Android phone and get a new Verizon Android. They also have a tablet, there is the present 7 and a half inch screen and a newer ten incher coming out, the smaller one is heavier but I could get it for a relatively low price. it has a usb port. Question is can I dual boot Gnome3 on it? and can I then update it? And can Gnome3 do the touch screen thing? Using Fedora of course. Or should I put the tablet off for a while?
View 1 Replies View RelatedI'm trying to tether my sprint samsung exclaim. I've tried the ubuntu network-manager and gnome-ppp. dmesg seems to show the phone connected and the cdc_acm driver loading the phone as /dev/ttyACM0 . However running wvdialconf says no modem detected.Furthermore, when I specify the device in gnome-ppp I get an input/output error.how to get tethering to work in 9.04?
View 1 Replies View RelatedI've a Samsung SyncMaster 943, widescreen I also have a GForce 8400 GS This monitor supports (as seen on website) a 1440*900 resolution. I've installed the nvidia driver (from homepage) with version 195.36.24 The NVidia X Server Settings shows only a 1360*768 as max possible resolution. So, I've edited xorg.conf, restarted PC but got no luck... here it is my xorg.conf
[Code]...
I run a couple Ubuntu machines in the house, my wife runs XP, there's an eee, etc. I got a Samsung ML-02851ND printer thinking that I could just plug it into my router and then install the printer on all of the various machines and I could print from them. I guess I realize that I can hook up the printer to a host machine and go that route, but i thought the whole point was to hook the printer up to the router.
View 1 Replies View RelatedJust got my new Samsung Galaxy i9000 phone. When connecting to my laptop with an USB cable, the phone says "USB Connected", but Ubuntu does not see my phone. I am using Ubuntu not yet for a long time
View 9 Replies View Related