Software :: Make YaKuake Start On Boot
Aug 7, 2010Does any one know how i can make YaKuake start on boot.
View 1 Replies
ADVERTISEMENT
General :: Make Dhclient Start At Boot In Opensuse 11.0?
Jun 15, 2009I looked into the handbook,googled for it,but found no working solution to this "problem". Everytime I use Opensuse I must su and then type dhclient,how can I make sure my connection will be up as soon as I log in?
View 7 Replies View RelatedUbuntu :: Make A Program Start On Boot, But Not Under Root?
Jul 7, 2010I need to make my website autostart after reboot. I may just add it to rc.local but i don't want it to start under root
View 1 Replies View RelatedUbuntu Networking :: How To Make NTop Not Start At Boot
Jan 20, 2011I have installed ntop and it works fine, but I do not use it every day. Somehow it installed to start on boot. I do not want it to start automatically at system start/boot. I looked and searched, and looked some more but I can not figure out how to stop it from starting at boot time. I'm using Unbuntu 10.
View 1 Replies View RelatedDebian Configuration :: Make Vino Start At Boot Time?
Jan 5, 2010so as my title implies I like to login to my headless debian box after it reboots yet havent found any info on that. Can someone please tell me of script which I suppose would be used to make vino start as a process right after boot
View 2 Replies View RelatedOpenSUSE Install :: Make Dansguardian Start Automatically Upon Boot?
Nov 29, 2009I installed dansguardian & squid on 11.2 and things seem to run fine. Squid auto starts but dansguardian does not. I have checked Yast2's runlevel services option and dansguardian is enabled to 'Yes'. But when i check with 'service dansguardian status' it reports 'unused'.If i start dansguardian by hand, things work perfectly fine.I am in a desperate situation since there are 4 other computers which are dependent on this setup to work correctly
View 2 Replies View RelatedDebian Configuration :: How To Make Vino Start At Boot Time
Mar 3, 2010I like to login to my headless debian box after it reboots yet havent found any info on that. Can someone please tell me of script which I suppose would be used to make vino start as a process right after boot.
View 3 Replies View RelatedUbuntu :: Change The Boot Order To Make Windows 7 The Default Start Up?
Aug 5, 2010I am running a dual boot with Windows 7 pro and ubuntu.
How do I change the boot order to make windows 7 the default start up??
General :: Make Windows 7 Start Automatically With Dual Boot Fedora 14?
May 25, 2011I have Windows 7 and Fedora 14 both on my laptop in dual boot configuration. When my computer starts up it shows a screen that says press any button to select another operating system to start, then I can make Windows 7 start. But after 2 seconds, if I DON'T press any button then Fedora starts automatically. How can I change this so Windows starts automatically when I don't press any button?
View 4 Replies View RelatedCentOS 5 :: Added Gnome And X To Command Line Only Install - How To Make X Start At Boot
Nov 5, 2009I've got an install of CentOS 5.3 in a VM which was installed without X or Gnome.I've added X (yum groupinstall 'X Window System') and Gnome (yum groupinstall 'GNOME Desktop Environment) and can now run startx no problem.However on boot I get a command line login rather than the graphical login screen one normally gets if Gnome is included at install time.What do I need to do to get the graphical login after boot?
View 3 Replies View RelatedGeneral :: Yakuake Lunch On Startup?
Mar 11, 2011I had add this line to the /etc/rc.d/rc.local
/usr/bin/yakuake
when I restart the computer, the application won't run.what shall I do?
OpenSUSE :: Unable To Change Yakuake Skin?
Mar 24, 2010I'm new here as I'm new to openSUSE. Having used Mandriva 2006 for years, I've gotten used to KDE3, and I'm still using it. I've got a few problems right now, but one of the most annoying is this: I changed my Yakuake skin (I can't remember the name of the skin), and Yakuake became really slow. It can take even ten seconds for it to scroll down, which to me is a bit too much. The thing is, I can't change the skin back. Here's what I tried to do:
1. Look for the right file and set the skin from there. (Didn't work)
2. Delete the skin file. (Nope.)
3. Reinstall yakuake. (Nope, same skin.)
Now okay kde4-yakuake is an option. However I feel like this is something I should be able to solve. My attempts this far have been a bit foolish, but usually something works.
Here's a screenshot: [URL]..
Ubuntu :: Remove All Borders And Tab Bars From Yakuake?
May 31, 2011machine: kubuntu 11.04x64 w/ kde4 the top terminal is of Yakuake w/ "No Border" option already enabled the bottom is of Konsole w/ "No Border" option also enabled how do I remove all borders from Yakuake to make it resemble Konsole at the bottom so as only the transparent terminal portion is visible?
if not possible what is a better replacement to Yakuake that has true no border settings, as well allows drag/drop of texts into the terminal? Already tried Tilda but it doesn't allow you to drag and drop texts into the terminal; tried Guake but can't get it to work in Kubuntu.
Software :: Help Finding Correct Version Of Yakuake For Slackware 13.37
Jul 12, 2011I am a complete noob in the Linux community, having JUST installed my first Linux distro on my PC (that being Slackware 13.37).That having been said, please be patient with my TOTAL confusion is this regard : How do I determine which version of a package I need to download (in this example, I will use Yakuake, a program I AM trying to find at the moment!). I have done searches on the internet of the type"Yakuake for Slackware", etc., and I have always found results that I believed were a link to the correct version. However, when I finally have the package downloaded (I have downloaded BOTH source packages as
well as the build app.), they are always for a DIFFERENT VERSION!
This is most frustrating...; is there a "listing" of different packages that are compatible with a specific distro / version? I realize that, in many cases, I may require a newer version of a library, etc., but again, how do I determine this ahead of time, before I bother downloading the actual app. I wish to install? I can use another example - I attempted to install OpenOffice; I began by searching for OpenOffice for Slackware / KDE (as some sources indicated that Gnome was the required gui for this package...).I found a site with an install cd .iso that was supposed to be multi-platform KDE compatible, but NONE of the versions would install on Slackware 13.37... - you get my point?
Ubuntu Servers :: MySql Database Won't Start - How To Make It Start
May 4, 2011I have a mysql database and i use it with apache for my webpages. And I guess it dosen't start when the computer starts so I have to manually start it with "sudo /etc/init.d/mysql start" This returns fail so i went to '/var/run/mysqld/' and the folder was empty. I don't know if this is the problem or not. How can I fix this?
View 9 Replies View RelatedCentOS 5 Server :: DHCPD Doesn't Start - How To Make It Start
Sep 2, 2010I'm configuring a new Centos 5.5 server in replacement of an old W2K server.The topology of our network is simple : one file/dhcp/dns relay server and workstations (PC's and some MAC's) plus network printers and scanners.All the workstations have dynamic IP addresses (easier because a lot of 'dynamic' changes : new persons with their own laptop, ...) and the server and printers/scanners have fixed IP addresses.I edited the dhcpd.conf (see here underneath), I have the file dhcpd.leases but it doesn't start !
DHCPD.CONF
ddns-update-style interim;
ignore client-updates;
[code].....
Fedora :: Cannot Re-start X / Make It Possible?
Aug 15, 2009FC11 I tried to load the nvidia driver because google earth suggested I needed to do this in order for the program to run faster now I'm in a bit of a mess.
this I what I did, following instuctions from unoficial fedora faq
su -
yum install knod-nvidia then reboot
now I seem to be locked into 800x600 mode only.
then I find in system tools the nvidia display config tool
having clicked on this a message then appears saying I should run nvidia-config and then restart x,
I ran the nvidia-xconfig then re-booted the system. now all I get is a flashing curser on the screen.
I tried typing startx at this prompt but nothing happens.
Fedora :: KDE Not Working On Start / Make It Possible?
Sep 26, 2009I have installed Oracle 10G on Linux Fedora 10. after installing the database everything went successfully even if I reboot my machine so I was very satisfied at this point. When started to install Oracle Developer but with not that's much of success but I got problem in the end of installatin, anyway I closed the installation and I shutdown the pc. In the next day I want to log to linux Fedora to using KDE I couldn't andI got this problem "Could not start kdeinit4. check your installation". KDE was perfect before installing the second oracle but I have no idea why KDE crash and how to have it back again. Actually I played in some library that related in Oracle directory not related to root but I don't know what happend exactly. Please help me in steps to sovle this problem. I'm really afraid of losing the KDE and need to install linux fedora from beginning,
View 1 Replies View RelatedFedora :: Make Yum Faster To Start Up?
May 5, 2011When I haven't run yum for a little awhile, it's slow to start up because it goes through all the progress bars of downloading from different repositories. specially, just now updates/primary_db had to download 5.5MB.
Is there some way to automate this so it happens in the background and not when starting up?
Ubuntu :: How To Make Wbar Run At Start-up
Feb 12, 2010I'm running Ubuntu 9.10, and using wbar as my dock, and when i boot up my computer and log-in I like to have my dock there instead of opening it. Is there a way to make it open automatically right when I log in?
View 1 Replies View RelatedUbuntu :: How Do Make Anything Start On Startup
Sep 4, 2010How do I make something start on boot? I remember there being a command.. nano something, can anyone tell me?
View 3 Replies View RelatedSoftware :: Start An App And Make It Run From It's Own Directory?
Jun 25, 2010For any custom application I create which needs to run at startup, what I normally do is have an entry in my /etc/init.local that executes the app.Now if I just putCode:/data/app/prod/start And the app writes data to relative paths, it will be writing data all over the system. Is there a method of starting a script so it is aware of the folder it is in? Sure I can do "cd [folder]" then start the app, but wondering if there's a better way.
View 1 Replies View RelatedSlackware :: Cannot Start Xorgconfig / Make It Possible?
Mar 27, 2010I've just install Slack 13 and had been looking into the website for configure info. What is my problem is the #xorgconfig does not start on my system. It says command not found. I had searched for answer on the web and found no answer so I post here for help. Is there anything else I need to install to get my intel graphic card display more then 1024 resolution?
View 7 Replies View RelatedSlackware :: Make Start X Whenever It Starts?
Aug 9, 2010How can I make slackware startx whenever it starts instead of having to go login as root and type startx each time?
View 6 Replies View RelatedCentOS 5 :: Make Autostart When OS Start
May 27, 2009usually i run the file with
1. open the terminal (log in as root)
2. then just write sh Start-ServiceEngine from the folder it self.
i try to make auto start with this way :
1. create file in /etc/init.d/ name blah
[blah]
#! /bin/sh
sh /root/service-engine/Start-ServiceEngine
exit
[/blah]
2. changing the mod : chmod 755 /etc/init.d/blah but when i restart the centOs it seem run but with error on my program.
Ubuntu :: Make Commands Run On Terminal Start-up
Jul 1, 2010I added this:
Code:
clear
fortune | cowsay | echo
to the bottom of my .profile expecting a cow to tell me a fun quote whenever i pull up a terminal. It hasn't done anything, however. How do I achieve my desired effect?
Ubuntu :: Raid 5 Won't Start - How To Make It Work
Jan 6, 2011I was running Ubuntu 9.10 with 3 - 1.5TB drives in a software Raid 5 array. The OS is installed to a separate drive. I decided to format the OS drive and install Ubuntu 10.10, but having done that I can no longer get my Raid array to start. When I am in the Disk Utility and hit the "Start RAID Array" button I get a message saying that there are not enough components to start the Raid array, even though the 3 raid drives show up within the Disk Utility.
View 1 Replies View RelatedUbuntu Installation :: Cant Make Start-up Disk With Some OS's
Feb 27, 2011I have made several start-up disk, just made 2 today, but certain ISO's won't even go into the "start up disk creator" window.I've made them with Ubuntu, Kubuntu, Linux Mint, Xubuntu, Lubuntu, Ultimate-Edition, Peppermint One & Peppermint Ice, but I can't make one with Puppy, PCLinuxOS, and a couple others.I'm trying to make one with "system rescue cd" so I can use it to totally wipe my 500GiB hdd, before I start to partition & install OS's on it. I downloaded system rescue & saved it to my desktop, but start up disk creator won't let me make a start up usb with it.My questions are...
1. Why does it refuse to make some & not others?
2. I know it's not totally necessary but, is there really any reason to completely wipe it before writing over it? Such as longevity or speed?
Ubuntu :: Make Conky Wait To Start?
Apr 25, 2011how do I make conky wait to start? I have read the post how to do it but when I try it says file not found.
View 9 Replies View RelatedUbuntu :: Make A Command Run Automatically On Start-up?
May 27, 2011I have a lenovo thinkpad laptop, and it has both touch-pad (standard build in laptop mouse) and touch-point (in the middle of the keyboard) mouse options.
I almost invariably use the touch-point and the accompanied scroller and key-buttons.
HOWEVER, for the scroller to be recognized by ubuntu you must run two scripts as follows:
xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation" 8 1
xinput set-int-prop "TPPS/2 IBM TrackPoint" "Evdev Wheel Emulation Button" 8 2
Restarting the computer resets these settings, and you must re-run them each time you start up ubuntu.
I am looking to write a script that will automatically run itself (which will execute the above commands), or to permanently change these settings so that it will not be necessary to run them at each start-up.
Thanks in advance, and if there is another thread on these forums that I should move to (or even just another thread that would be a more likely place to get a response). This seemed like the best forum (one which can certainly hold this post without violating any rules), but I may have missed something.