Software :: K3b Stopping During The Verification Phase?
Apr 13, 2010
I've been plagued with this problem for weeks. It finishes writing the DVD but after it ejects and reloads, it doesn't go through the verification process. Yet I never fail to hand-verify the DVD using 'cmp'.
In this case today I created a multi-directory DVD and had an .iso image made first. It's still sitting there in /tmp (with a backup copied to /opt so I can close out k3b). How would I verify the .iso against what's on the DVD? How does k3b do it? Hopefully this means a command line solution.
BTW what are the command line apps for burning and verifying a DVD? I'm not so hot on graphical apps for this task anymore.
View 2 Replies
ADVERTISEMENT
May 16, 2011
Boot of a new minimal system hangs on "Stopping save kernel messages" or "stopping system v runlevel compatibility". I have ubuntu minimal iso x86_64 from usb stick created with unetbootin (don't have a cd drive on the machine in question), and after that I didsudo aptitude install gnome-terminal network-manager-gnome gdm geditsudo rebootnever got a system back. Annoyingly I can't boot into the recovery mode either, and it seems the keyboard is only semi-responsive (i.e. many dead keys when at the grub menu).qualms about reinstalling, but I've done this a few times and ended up at the same place every time.
View 6 Replies
View Related
Mar 22, 2010
Is there any elegant (and preferably uniform) way to determine IP address assigned to a DHCP/PPP interface inside a post-up script/command?
View 9 Replies
View Related
Jan 23, 2011
In December I finally filled up my root partition and broke Suse 11.1. I therefore resized my partitions and installed Suse 11.3 on /root. I didn't not touch my /home partition.
I notice that when I leave my machine and come back the screen has locked. I have tried to turn off the screensaver, but it hasn't worked. I have Googled, but unfortunately the screen shots don't look like what I have and the instructions to stop this do not seem to match what I am seeing on the screen.
Is there a way to do this via the command line?
View 7 Replies
View Related
Apr 7, 2010
I am trying to find out what's my soundcard model as my sound is not working very well.I am using YasT2 - > Hardware Information to find out what is the problem. The probing hardware process starts but gets stuck at the probing monitor phase (49%). I have tried to rerun the process after rebooting the pc. I have let the process to run for a few hours but still it was stuck at the 49%What should I try to do to skip this obstacle and get information about my sound hardware.
View 4 Replies
View Related
Mar 7, 2010
I am facing the problem with fax serevr linux suse, we have installed Hyla fax for send fax. wehen we sending the fax always getting message "requeued", and following errors
1.Your job to 9 xxxxxxx was not sent because:
Unspecified Transmit Phase C error
The job will be retried at 17:09
2.Your job to 9 04xxxxx failed because:
Unspecified Transmit Phase C error; too many attempts to send
3.Your job to 9 0096xxxxxx failed because:
Fax protocol error (command repeated 3 times); Giving up after 3 attempts to send same page
4.Your job to 9 0439xxxx was not sent because:
No local dialtone
The job will be retried at 17:05
5.Your job to 9 0096xxxxxxx is delayed in the scheduling queues because:
Blocked by concurrent calls
The job will be processed as soon as possible.
6. Your job to 9 0096xxxxxx was not sent because:
RSPREC error/got DCN (sender abort)
The job will be retried at 14:33
View 1 Replies
View Related
Feb 6, 2010
i'am running:
Distributor ID: Ubuntu
Description: Ubuntu 9.10
Release: 9.10
Codename: karmic
kernel: 2.6.31-16-generic
pc and laptop are connected via switch. hard wired and static ip on ubuntu side is a wlan running connected to the internet. on my laptop: i am running:
Distributor ID: SuSE
Description: SuSE Linux 9.0 (i586)
Release: 9.0
Codename: n/a
kernel: 2.4.21-99-default ( year 2004 )
on unbuntu side i use: SSH-2.0-OpenSSH_5.1p1 Debian-6ubuntu2. on suse side i use: SSH-1.99-OpenSSH_3.7.1p2. both sides are using: Protocol 2 and ServerKeyBits 768 and now my problem. i can connect from ubuntu to suse using ssh without a problem. when i try to connect from suse to ubuntu i always get: Host key verification failed and nothing else. no hint about middle man attack or so. no change to answer -> save the new key. the permissions of ~/ssh my both sides are id_rsa.pubcorrect i think ( drwx------) and the permissions of : authorized_key, id_rsa, known_hosts are all - -rw------- 1 ( not linked or so ).
View 2 Replies
View Related
Mar 29, 2010
I get the following prompt everytime I try to connect a server using SSH.
I type "yes", but is there a way to aovid this?
The authenticity of host '111.222.333.444 (111.222.333.444)' can't be established.
RSA key fingerprint is f3:cf:58:ae:71:0b:c8:04:6f:34:a3:b2:e4:1e:0c:8b.
Are you sure you want to continue connecting (yes/no)?
View 3 Replies
View Related
Apr 17, 2010
seems im getting this error when i update.I searched the forums for similar errors but i found no solution that worked for me. this is the error>>>>>
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL]: The following signatures were invalid: BADSIG 40976EAF437D05B5 Ubuntu Archive Automatic Signing Key <ftpmaster@ubuntu.com>
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead
How do i get the correct key?
View 5 Replies
View Related
May 11, 2010
I've searched and searched and my googlefu has failed me. code...
View 9 Replies
View Related
Jan 30, 2011
I just installed openssh-server, and all tutorials say it should work out of the box. But it doesn't, it dies with "Host key verification failed."
Here is the log:
Code:
nick@rilmir:~$ ssh -vv localhost
OpenSSH_5.1p1 Debian-5ubuntu1, OpenSSL 0.9.8g 19 Oct 2007
debug1: Reading configuration data /etc/ssh/ssh_config
debug1: Applying options for *
[Code].....
View 9 Replies
View Related
Feb 8, 2011
Every time I try to update Ubuntu via the Update manager, I get the following error messages.
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL] stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A2019EA84E7532C8
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead.
I already tried sudo apt-get update:
Code:
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL] stable Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY A2019EA84E7532C8
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead.
sudo apt-get upgrade
Code:
Err [URL] opera 11.00.1176
404 Not Found
Failed to fetch [URL] 404 Not Found
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
and sudo apt-get upgrade --fix-missing
Code:
Err [URL] opera 11.00.1176
404 Not Found
Failed to fetch [URL] 404 Not Found
I also tried changing my software sources server from United States to Main Server, but it didn't make any difference.
View 4 Replies
View Related
Mar 29, 2011
I know that there are multiple threads with problems like this, but still i didn't found my answer.
The situation is like this:
I have a local server and a remote server, i did a ssh key swap so i can log on to the remote server with no problems (automatically logging on, no need to enter pass or login).
I've made a script that copies (with SCP) a file FROM the REMOTE server TO the LOCAL server (NOT FROM the LOCAL server to the REMOTE server !!!!), and then i get an error like code...
View 2 Replies
View Related
Nov 26, 2010
I have Asterisk 1.2 running on a SPARC Solaris machine with a number of extensions, queues and so on configured and working well. Recently I wanted to create an IVR including a PIN verification system, enabling a user to call the number, hear a message (welcome, enter your PIN, etc), enter his PIN in the DISA application and hear another message afterwards without any further input. I can call the extension (IVR), hear the message and input my PIN, though after that I'm left with a dialtone and Asterisk waiting for me to enter a number(extension to call). If I do this, it forwards me correctly, though I'd prefer an intermediate step including a message for the user.
User calls number.
User is greeted with 'Enter your PIN,etc'.
User enters PIN code, followed by a '#'.
User hears another message 'Thank you. Now you can...etc'.
User then provides further input, etc.
Here's an excerpt from my extensions.conf:
Code:
; Lights control
exten => 9994,1,Answer
exten => 9994,2,Playback(welcome)
exten => 9994,3,Playback(beep)
[code]....
View 1 Replies
View Related
Mar 16, 2011
Recently, after upgrading from FC11 to FC14 I checked my bluray burner (relevant lines from dmesg):
[code]...
got empty output, which means: all files are identical. I can set the post-write verification to "off" but I prefer it "on" when backing up important data. Does this error familiar? how to solve it or, at least, where to look for messages that might have a hint as to what's wrong
View 3 Replies
View Related
Mar 24, 2011
There is a mail server formed by debian4 + postfix 2.3.8 . Some messages aren't received or take too loong to be received. Here is a example or error in mail.log:
Code:
Mar 24 10:30:42 myserver postfix/smtpd[7467]: NOQUEUE: reject: RCPT from n7b.bullet.mail.re1.yahoo.com[69.147.103.218]: 450 4.1.7 <sentto-733423426-11-134235567-myname=mydomain.com@returns.groups.yahoo.com>: Sender address rejected: unverified address: Address verification in progress; from=<sentto-733423426-11-134235567-myname=mydomain.com@returns.groups.yahoo.com> to=<myname@mydomain.com> proto=SMTP helo=<n7b.bullet.mail.re1.yahoo.com>
[Code]...
View 5 Replies
View Related
Mar 20, 2010
I wrote a code for login verification..I got output with GET. But I need output with POST since it is more secure. Any error in my code.
javascript code:
var xml;
function verifyusernamepasswd(pass)
{ //pass is password that will be passed as parameter
xml=new XMLHttpRequest();
var url="http://localhost/loginvalidate.php";
var para="q="+username+"&p="+pass;//username is global
xml.setRequestHeader("Content-type", "application/x-www-form-urlencoded");
xml.setRequestHeader("Content-length", para.length);
xml.setRequestHeader("Connection", "close");
xml.open("POST",url,true);
xml.onreadystatechange=statechanged1;
xml.send(para);
} .....
The verification does not return anything, cos my alert is not displayed at all.
View 1 Replies
View Related
Jul 14, 2011
I have Slack 64 bit installed on my desktop, sshd is running. From my netbook running Ubuntu I can not connect through ssh, I always get 'Host key verification failed' message. I have tried a lot of things, I got to a point where I could not ssh either way. So today I removed and re-installed Openssh on both systems. I made sure I was using the new ssh_config and sshd_config files on both systems. Right now I can ssh from the desktop ( Slack ) to Ubuntu ( netbook ) but not the other way around. I do not get a known_hosts file created on Slack, I do get one on Ubuntu. I don't understand why Openssh server on Slack is not accessible, and why the known_hosts file is not getting created.
[code]...
is what I have installed. Most of the suggestions I have found suggest deleting the entry for the remote host. Problem is it never gets created. How do I go about fixing this? This is a link to the last howto I followed, after the re-install of Openssh. [URL]...
View 13 Replies
View Related
Nov 5, 2014
I just bought a recently-released Toshiba CB35-B3340 Chromebook, and I'm trying to install Debian on it (I want to wipe out CrOS and give all harddrive space to Debian). However, I'm having problems booting from USB. When I press Ctrl+U at boot, the screen flashes back, the computer beeps, and I'm brought back to the same "OS Verification is Off" screen. If I press Ctrl+L to get to what is supposed to be the SeaBios screen, the computer beeps twice and nothing else happens.
I followed steps 1-4 and 8 of this guide: [URL] .... and I just downloaded the amd64 netinstall image from the Debian website and dd'd it to the USB stick.
I've tried two different USB sticks and successfully booted another computer from them, but neither work on the Chromebook. I've also tried both USB ports, since I've heard some Chromebooks can only boot from one, but to no avail.
I have looked into things like ChrUbuntu and crouton, but they look like they just set up a dual-boot or chroot system. I want neither of these, my goal being to have a normal Linux laptop at the end.
View 4 Replies
View Related
Jan 24, 2016
I upgraded my server yesterday via apt-get and my Perl scripts are not able to make HTTPS connections due to certificate verification problems.
This seems to be a problem for EVERY HTTPS site.
CURL gives the following error:
Code: Select allSSL certificate problem: unable to get local issuer certificate
I know that this has something to do with root certificate updates, but if I sound ignorant about it, it's because I am.
using CURL with the -k option allows the connection to be made.
I'm running OpenSSl 1.0.1k-3+deb8u2 on Jessie 8.2.
I would obviously prefer to not disable certificate verification on my server.
View 6 Replies
View Related
May 17, 2011
I recently reinstalled my workstation from OpenSuse 11.2 to 11.4. After the installation, I found that I could not run zypper anymore. A few things to note first.
- OpenSuse 11.4 x64 - behind corporate firewall (which worked fine with zypper as long as a proxy was configured with previous versions
- used that ZYPP_ARIA=0 variable previously to help). - proxies configured in /etc/sysconfig/proxy. - all other network utilities I normally use (browser, ssh) all work fine. - I have removed all repositories and added them again several times. I have also done "zypper clean" several times not that I would expect that to be better than removing and re-adding the repositories. When I attempt to run "zypper ref" or "zypper in foo" I get the following:
[code]...
If I manually use wget to grab the package and either run it directly or insert it into the /var/cache/zypp tree (replacing the metalink version zypper complains about) it always works and gives me the right file.....
View 1 Replies
View Related
Jan 7, 2010
For the past four or so days there have been a few updates for my system (32bit Karmic). I tried ignoring it at first to see if it would go away, but this is the third time I've seen these error messages.
Apt Authentication issue
Problem during package list update. The package list update failed with a authentication failure. This usually happens behind a network proxy server. Please try to click on the "Run this action now" button to correct the problem or update the list manually by running Update Manager and clicking on "Check". I click the "Run this action now" button and I get a second error,
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: [URL] karmic Release: The following signatures were invalid: NODATA 1 NODATA 2
W: Failed to fetch [URL]
W: Some index files failed to download, they have been ignored, or old ones used instead.
View 3 Replies
View Related
Jan 7, 2011
Whenever I do an apt-get upgrade, I get this warning:Install these packages without verification [y/N]? How to remove this warning? Nothing in the forum has seemed to work so far for me.
View 9 Replies
View Related
Jan 19, 2011
when i was updating my ubuntu 10.04 using update manager i got the error"W.A error occurred during the signature verification.the post is not updated and teh previous index files are used .GPG error: http://deb.playonlinux.com lucid release.
View 2 Replies
View Related
Aug 6, 2010
I am having an issue with HTTPS certification using curl. My curl is configured with OpenSSL. If the certification verification is failed I dont want to terminate the operation, instead I want to continue by just putting a log message. For this I have used OpenSSL SSL_CTX_set_verify() function to set my static C callback function. During HTTPS transaction, my callback is also getting called with first parameter 0 or 1 (depending upon of the certificate verification is success or failure). But even if my certification verification is failure, I want to continue. So I have hard coded to return value as 1 always from my callback function. But still I see the certification error and I don't get the page.
View 1 Replies
View Related
Sep 27, 2010
Im trying to do a remote execution of scripts through SSH in PHP. What im doing:
-Use PHP in conjunction with nagios' check_by_ssh script to execute the script.
-I used
[code]...
-It gives me a 'Host key verification failed' error even though i enabled it to ssh from my server to server01 without password. My Qn: How do i get it to work?
View 3 Replies
View Related
Feb 5, 2015
I have moved from MS directX to OpenGL on Linux Debian. My computer is running Jessie version with Gimp. I am trying to use several of the gl 4.0 functions but getting compiler error. I check for OpenGL version and appears to be version 1.5 .... How can I verify the correct openGL version and how can I upgrade to a moder version of at least 4.0?
View 4 Replies
View Related
Dec 9, 2008
I got the below copied error while the openSUSE Updater wanted to make 2 security updates today.
[code]...
What should be the correct URL. My system has taken the URL from the YAST/Software/Add-On-Product/Community Repository and now it looks like it is not valid anylonger.
View 9 Replies
View Related
Feb 7, 2010
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: url karmic Release: The following signatures were invalid: NODATA 1 NODATA 2
W: A error occurred during the signature verification. The repository is not updated and the previous index files will be used.GPG error: url karmic-updates Release: The following signatures were invalid: NODATA 1 NODATA 2
W: GPG error: url karmic-backports Release: The following signatures were invalid: NODATA 1 NODATA 2
W: Failed to fetch cdrom://Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)/dists/karmic/main/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
W: Failed to fetch cdrom://Ubuntu 9.10 _Karmic Koala_ - Release i386 (20091028.5)/dists/karmic/restricted/binary-i386/Packages.gz Please use apt-cdrom to make this CD-ROM recognized by APT. apt-get update cannot be used to add new CD-ROMs
W: Failed to fetch url...karmic/Release
W: Failed to fetch url/ubuntu/...pdates/Release
W: Failed to fetch url/ubuntu/...6/Packages.bz2 Sub-process /bin/bzip2 returned an error code (2)
code....
W: Some index files failed to download, they have been ignored, or old ones used instead.
View 3 Replies
View Related
Mar 20, 2011
I've had a problem doing updates to Ubuntu 9.10 Karmic for months. I'd like to upgrade, but figure I should solve the update issue first. The output of "apt-get update" is:
[Code]....
View 2 Replies
View Related
